Seeker

Seeker

GPS Compatible Leakage Detector

The Seeker CATV leakage detector is essential for in-the-field cable TV leak locating and troubleshooting, and leakage management with the Seeker GPS system.

  • High performance, frequency-settable leakage detector
  • Ideal for drive-outs and leak location and troubleshooting
  • Large numerical measurement display
  • Sensitive, stable measurements, Channel Tag compatible
  • Data storage and upload for documentation
Leakage Detector

The Seeker leakage detector is specifically designed for efficient distribution leakage management, displaying numerical measurements of leaks on up to ten selectable channels and emitting a tone proportional to leak strength.

Mobile or handheld

The Seeker may be used in its mobile mount (included) for drive outs, or removed from the mount for leakage troubleshooting on foot with a rubber duck, or optional dipole.

Stable, repeatable readings, multi-frequency operation and leakage recording simplify leak location and documentation.

Comprehensive coverage

Durable, simple to use and very cost-effective, the Seeker is the flagship of a new generation of Trilithic leakage products, which includes the popular Seeker Lite Installation Leakage Detector.

A workforce that includes both of these leakage measurement instruments ensures leakage-free networks from subscriber to headend.

This is a frequency agile leakage detector (109.25 to 110.5 and 118.5 - 147.25 MHz) with ten user selectable presets. The instrument’s features include Searcher Plus GT technology that is compatible with CT-2 or CT-3 channel tagging techniques, measurement range from 10 - 2000 μV/m, numeric readout, and tone proportional to signal strength. The complete kit includes the Seeker Leakage Detector, Rubber Duck Antenna, Mobile Mount (SMB-2), Mobile Mount DC Power Cable, AC Travel Charger & USB Cable, Operation Manual on CD and printed Quick Start Installation Checklist & Guide.

For assistance with any installation, please call tech support at (800) 344-2412.

This firmware is appropriate for most users, but some MSO's have different update policies in place. In some cases the standard firmware may render certain test functions inoperable. Please contact your manager before updating your firmware.

This firmware update requires Seeker Setup Software Version 3.52 to configure your Seeker Instrument. Please contact Trilithic Applications Engineering Support to obtain a free software update.

v 02.07

  • Added a truck squelch parameter (Requires Seeker Setup v.3.52 or later to work correctly).

v 02.04

  • Enhanced temperature compensation
Seeker
Seeker Approved A/B/G/N Wi-Fi Access Point
Request a Quote
This is a high-powered, long-range Dual Band Wireless N600 Outdoor Access Point with speeds up to 300Mbps on both its high-powered 2.4GHz and 5GHz radios. Encased in a rugged IP68-rated waterproof enclosure this versatile Outdoor Access Point can be configured in a number of modes and its dual band architecture enables network administrators to even select different operating modes per frequency band.
Seeker
Vehicle Power Adapter with USB cable (CL-9)
Request a Quote

Vehicle power adapter for the Seeker, Seeker SE, Seeker D, Seeker D Lite, 120 DSP, and 802 AWE. The Vehicle Power Adapter (CL-9) is not needed if using the Seeker or Seeker D Mobile Mounts and the Mobile Mount Power Cable that is included with the Seeker, Seeker SE, Seeker D.

Seeker
Seeker Holster (CC-28)
Request a Quote

Holster used to protect the Seeker when used out of the Seeker Mobile Mount (SMB-2) that can also be used with the AFS-2 Dipole Antenna that is equipped with a Seeker Pole Mounting Kit.

Seeker
Seeker Pole Mounting Kit
Request a Quote

Mounting kit for attaching the Seeker Holster (CC-28) to the AFS-2 Handheld Dipole Antenna which enables one-handed use of the leakage detector and antenna.

Seeker
AFS-2 Handheld Dipole Antenna - Long Pole (108 to 160 MHz)
Request a Quote

Calibrated halfwave dipole with 50 Ohm impedance and long pole (3 meter) for low band (108 to 160 MHz) leakage detection. MUST SPECIFIY SINGLE FREQUENCY FROM 108 TO 160 MHZ. USE WITH THE SEEKER D REQUIRES 138 MHZ.

Seeker
AFS-4 Handheld Dipole Antenna - Short Pole (108 to 160 MHz)
Request a Quote

Calibrated halfwave dipole with 50 Ohm impedance and short pole (18 inch) for low band (108 to 160 MHz) leakage detection. MUST SPECIFIY SINGLE FREQUENCY FROM 108 TO 160 MHZ. USE WITH THE SEEKER D REQUIRES 138 MHZ.

Seeker
APM-3 Vehicle Antenna - Permanent Mount (108 to 160 MHz)
Request a Quote

Vertical quarter wave whip antenna with permanent vehicle mount for low band (108 to 160 MHz) leakage detection. MUST SPECIFIY SINGLE FREQUENCY FROM 108 TO 160 MHZ. USE WITH THE SEEKER D REQUIRES 138 MHZ.

Seeker
AVM-3 Vehicle Antenna - Magnetic Mount (108 to 160 MHz)
Request a Quote

Vertical quarter wave whip antenna with magnetic vehicle mount for low band (108 to 160 MHz) leakage detection. MUST SPECIFIY SINGLE FREQUENCY FROM 108 TO 160 MHZ. USE WITH THE SEEKER D REQUIRES 138 MHZ.

Seeker
NFP-1 Near Field Probe
Request a Quote

Passive near field probe with 50 Ohm impedance for leakage detection in the near field at any leakage detection frequency.

Seeker
Seeker MCA I to Wireless Matrix or SageQuest Data Cable
Data Cable
Request a Quote
RS-232 serial data cable (10 foot) with DB-9 (male) connector to 7 Pin connector for connecting the Seeker MCA to a third party GPS (Wireless Matrix, SageQuest, etc) system.
Seeker
Seeker MCA II Cellular Antenna (900/1800 MHz)
Request a Quote
Cellular antenna (900/1800 MHZ) for cellular equipped Seeker MCA II units. Includes 12 foot coaxial cable for remote mounting.
Seeker
Seeker MCA II Cellular Antenna (850/1900 MHz)
Request a Quote
Cellular antenna (850/1900 MHZ) for cellular equipped Seeker MCA II units. Includes 12 foot coaxial cable for remote mounting.
Seeker
Remote Wi-Fi Antenna for Seeker MCA I & MCA II (2.4 GHz)
Request a Quote

Wi-Fi antenna (2.4 GHz) for Wi-Fi-equipped Seeker MCA, Seeker MCA II & Seeker BB-2 units. Includes 12 foot coaxial cable for remote mounting.

Seeker
GPS Receiver For Seeker MCA II & MCA III
Request a Quote

Garmin GPS Receiver with RS-232 (DB-9) interface for the Seeker MCA II. May be mounted with the included magnetic mount or bolted to a vehicle roof.

Seeker
GPS Receiver For Seeker MCA
Request a Quote

Garmin GPS Receiver with RS-232 interface for the Seeker MCA. May be mounted with the included magnetic mount or bolted to a vehicle roof.

Seeker
CAT5e Ethernet Patch Cable - 10 Foot (Quad-Shielded)
Request a Quote
CAT5e Ethernet patch cable (10 foot) quad-shielded with 100 Ohm impedance and RJ-45 Male to Male connectors.
Seeker
Battery
Request a Quote

Li-ION battery for the Seeker Lite, Seeker Lite², Seeker, Seeker SE, Seeker D, Seeker D Lite Leakage Detectors, and 120 DSP.

Seeker
AC to DC Power Adapter & Battery Charger with USB Charge & Data Cable
Request a Quote

AC to DC power adapter & battery charger for the Seeker, Seeker SE, Seeker D, Seeker D Lite, 120 DSP, and 802 AWE. Charger provides a Type-A USB Socket for use with TYPE-A USB power cables. Includes a Type-A USB to Mini USB Charge/Data Cable (I/O-20).

Seeker
Seeker & Seeker D Mobile Mounts or Seeker BB-2 DC Power Cable (Non-Green)
Request a Quote

DC power cable for Non-Green Seeker & Seeker D Mobile Mounts or Seeker BB-2.

Seeker
Mini-USB Power/Data Cable (I/O-20)
Request a Quote

Charge & data cable for the Seeker, Seeker SE, Seeker D, Seeker D Lite, 120 DSP, and 802 AWE with Type-A USB plug to Mini USB plug.

Seeker
Rubber Duck Antenna (Low Band)
Request a Quote

Rubber duck monopole antenna with 50 Ohm impedance for low band (108 to 160 MHz) leakage detection.

Seeker
Remote Wi-Fi Antenna for Seeker MCA I & MCA II (2.4 GHz)
Request a Quote

Wi-Fi antenna (2.4 GHz) for Wi-Fi-equipped Seeker MCA, Seeker MCA II & Seeker BB-2 units. Includes 12 foot coaxial cable for remote mounting.

Seeker
Seeker & Seeker SE Mobile Mount (SMB-2)
Request a Quote

Mobile mount with mobile mount power cable for the Seeker & Seeker SE.

Seeker
Seeker Setup PC Software with Seeker Family Data Cable
Configuration Software
Request a Quote

This is the Seeker Setup configuration software for the Seeker, Seeker SE, Seeker D, Seeker MCA, Seeker MCA II, Seeker MCA III, Seeker BB-2 and Seeker Lite² Leakage Detectors. The Seeker Setup Software is used to manage leakage meter configurations including; leakage frequencies, default frequency, tag frequency, display units, tech ID, meter/truck squelch, peak hold, distance correction, GT noise discrimination, antenna correction factors, MCA pairing and firmware updates.

Additionally, the software is used to manage mobile communication adapter (MCA) configurations including; display units, truck ID, vehicle shutdown timer, peak hold, early detection notification (EDN), LAW Server Upload Settings, home zone, network connections (Ethernet, Wi-Fi, Cellular & Bluetooth), GPS pass through, remote upload, fleet management and firmware updates.

All of these settings can be stored locally on the PC, which is useful if the user organization has several devices and wants to create and maintain standard configurations for all of them. Devices can be connected to the software via Ethernet, Mini USB Cable (included) or Serial Data Cable (included). The complete kit includes: Seeker Setup Software on CD, Mini USB Charge/Data Cable (I/O-20) and Seeker Lite² Data Cable (I/O-17). MINIMUM PC REQUIREMENTS: WINDOWS XP OR HIGHER (32 OR 64 BIT), PENTIUM III OR HIGHER PROCESSOR, 64 MB RAM, 100 MB FREE STORAGE SPACE, VIDEO ADAPTER & MONITOR (256 COLORS, 1024 x 768 DPI), KEYBOARD AND MOUSE.

Seeker
Leakage Analysis Workshop
Request a Quote

LAW, coupled with Seeker GPS, provide a leakage management system that enables operators to find and fix leaks quickly.