Seeker D Lite
In-Home Leakage Detector
The Seeker D Lite is a dual-mode and dual-frequency in-home leakage detector that accurately monitors leakage in all digital systems or in mixed digital and analog systems. The Seeker D Lite works with both the CT-4 Channel Tagger in the headend or the Seeker D Lite Source Transmitter in the field.
Easily find & fix the smallest, hardest to find sources of ingress into your plant
Mitigation of signal leakage within the subscriber premise is essential for the successful operation of services both inside and outside of the coaxial cable network. This combined with a new requirement to simultaneously monitor for signal leakage in both the aeronautical and LTE bands, makes it even more important to thoroughly evaluate the potential for interference within the subscriber premises.
Trilithic has developed a new system for leakage find and fix which will comprehensively test the Aeronautical and LTE bands in fully digital, analog, and mixed cable systems. The new Seeker D Lite™ system provides installers and repair techs with two different types of tools for finding and fixing leakage in both the Aeronautical and LTE bands.
In-Home Leakage Detector
The new Seeker D Lite™ is a tough, convenient, and flexible leakage test tool. The Seeker D Lite works by measuring tagged RF signals in and around a subscriber’s premises.
This leakage detector assists in installation and troubleshooting by verifying that the leakage within the subscriber premises is not great enough to contribute to the cable system’s cumulative leakage index (CLI). Leaks can also be important indicators of ingress that can hinder communication on the return band.
The Seeker D Lite works in conjunction with either the CT-4™ Channel Tagger in the headend or the Seeker D Lite Source Transmitter at the ground block. Both devices provide an uncompromising tagging solution for active analog or digital systems and can be used to identify and locate all RF leaks in both the Aeronautical and LTE bands.
Advanced, Compact Design
The Seeker D Lite is equipped with a built in antenna that provides technicians the ability to find even the smallest of leaks while easily moving throughout a home. Additionally, an easy-to-read backlit display provides a simultaneous dual-view of both bands making it even easier to locate leaks when walking through the home.
All of these features combined with a compact design and rugged carrying case make the Seeker D Lite the go-to leakage detector for every technician.
Advanced In-Home Shielding Integrity Testing
- Dual-Mode & Dual-Frequency In-Home Leakage Detector that Accurately Monitors Leakage in All Digital Systems or Mixed Digital and Analog Systems)
- Provides a Cost Effective Solution for In- Home Leakage Detection by using Existing CT-4 Channel Taggers Installed in the Headend or by using the Seeker D Lite Source Transmitter
- When Used with the Seeker D Lite Source Transmitter at the Ground Block, the Seeker D Lite Provides an Industry Leading Sensitivity of 0.1 mV/m for Finding the Smallest of Leaks
- Detects Leaks at a Low Enough Level to Validate that Transmissions from Cellular Devices in the Home do not Enter the Cable Plant and Cause Potentially Harmful Interference)
Advanced Leakage Detection
The Seeker D Lite is a tough, convenient, and flexible leakage test tool, measuring tagged RF signals in and around the customer's premises.
The following screen shows every option of the Seeker D Lite activated, with descriptions for each.
-
GPS – Not used on this meter.
-
DIST – Not used on this meter.
-
PK – Shown when the Peak Hold feature is active. When the icon is not shown, the Peak Hold feature is turned off.
-
FREQ – Indicates the number of the currently selected frequency preset.
-
Tag – Shown when tagged signal leakage is detected.
-
NOISE – Indicates the meter is in Noise mode, showing ambient noise levels.
-
Measurement units – Indicates leakage measurement units as selected in Seeker Setup.
-
Main display – Shows various parameters, and its function depends on the current display mode selection.
-
Antenna – Flashes when the signal mode is selected. This is the normal mode for leakage detection.
-
Bar graph – Shows the level of various Seeker D Lite parameters, and its function depends on the current display mode selection.
-
Battery – Flashes when the battery mode is selected. The icon will stay on when the battery needs to be recharged.
-
Speaker – Flashes when the Speaker Volume Level mode is selected.
-
Charge – Flashes when the battery is being charged, or when the Battery Charge Level screen is displayed.
Vehicle power adapter for the Seeker, Seeker SE, Seeker D, Seeker D Lite, 120 DSP, and 802 AWE. The Vehicle Power Adapter (CL-9) is not needed if using the Seeker or Seeker D Mobile Mounts and the Mobile Mount Power Cable that is included with the Seeker, Seeker SE, Seeker D.
Vehicle power adapter for the Seeker, Seeker SE, Seeker D, Seeker D Lite, 120 DSP, and 802 AWE. The Vehicle Power Adapter (CL-9) is not needed if using the Seeker or Seeker D Mobile Mounts and the Mobile Mount Power Cable that is included with the Seeker, Seeker SE, Seeker D.
Charge & data cable for the Seeker, Seeker SE, Seeker D, Seeker D Lite, 120 DSP, and 802 AWE with Type-A USB plug to Mini USB plug.
Euro power adapter (CEE 7/16 Europlug, Type C) for the Seeker Lite², Seeker, Seeker SE, Seeker D, Seeker D Lite Leakage Detector, Seeker D Lite, 120 DSP, and 802 AWE AC to DC Power adapter & battery charger. Does not include AC to DC power adapter & battery charger or power cable.
UK power adapter (BS 546, Type D) for the Seeker Lite², Seeker, Seeker SE, Seeker D, Seeker D Lite Leakage Detector, Seeker D Lite, 120 DSP, and 802 AWE AC to DC Power adapter & battery charger. Does not include AC to DC power adapter & battery charger or power cable.
Australian power adapter (AZ/NZS 3112) for the Seeker Lite², Seeker, Seeker SE, Seeker D Leakage Detector, Seeker D Lite, 120 DSP, and 802 AWE AC to DC Power adapter & battery charger. Does not include AC to DC power adapter & battery charger or power cable.
Rack Mounted (1U) unit that is used as a system with the Seeker D Digital Leakage Detector to detect leaks in the Aeronautical and LTE frequency bands and eliminates all 'false alarm' triggers. The CT-4 Provides proprietary dual CW carriers at two locations to give the Seeker D Leakage Detector its ability to detect leaks in the Aeronautical Frequency Band (136 to 139 MHz) and LTE Frequency Band (610.5 to 615 MHz). The CT-4 eliminates the risk of affecting any adjacent digital channels by injecting an adjustable signal from 10 to 30 dBmV, targeting approximately 30 dB below the chosen digital carriers. It also features the functions of earlier CT-2/CT-3 Channel Taggers to work in conjunction with existing Seeker GPS system components. Only one CT-4 is needed per head-end. The complete kit includes: CT-4 Digital Channel Tagger with built-in 120/240 VAC power supply and AC power cable or -48VDC input. REQUIRES SEEKER SETUP PC SOFTWARE FOR FIRMWARE UPDATES.
The Seeker D Lite Source Transmitter is used to replace the cable service at the subscriber’s ground block for use with the Seeker D Lite in-home leakage detector. The higher levels of the Seeker D Lite Source Transmitter will increase the field strength of the signals radiating out of the customer’s home network, providing a higher level of sensitivity to find even the smallest of leaks.
When used with the Seeker D Lite Source Transmitter at the ground block, the Seeker D Lite provides and industry-leading sensitivity of 0.1 uV/m for finding even the smallest of leaks and accentuates any ingress points in the customer premise.
The complete kit includes: Seeker D Lite Source Transmitter, AC to DC Power Adapter & Battery Charger and USB Charge & Data Cable (Mini-B Male to Standard-A Male). THE SEEKER D LITE SOURCE TRANSMITTER OR CT-4 CHANNEL TAGGER IS REQUIRED FOR THE SEEKER D LITE TO OPERATE.
AC to DC power adapter & battery charger for the Seeker, Seeker SE, Seeker D, Seeker D Lite, 120 DSP, and 802 AWE. Charger provides a Type-A USB Socket for use with TYPE-A USB power cables. Includes a Type-A USB to Mini USB Charge/Data Cable (I/O-20).
AC to DC power adapter & battery charger for the Seeker Lite², Seeker, Seeker SE, Seeker D, Seeker D Lite, 120 DSP, and 802 AWE. Charger provides a Type-A USB Socket for use with TYPE-A USB power cables. Does not include power/data cable.
Charge & data cable for the Seeker, Seeker SE, Seeker D, Seeker D Lite, 120 DSP, and 802 AWE with Type-A USB plug to Mini USB plug.
Carrying case for use with the Seeker D Lite. This form fitted custom carrying case includes a belt clip.
Li-ION battery for the Seeker Lite, Seeker Lite², Seeker, Seeker SE, Seeker D, Seeker D Lite Leakage Detectors, and 120 DSP.
This is the Seeker Setup configuration software for the Seeker, Seeker SE, Seeker D, Seeker MCA, Seeker MCA II, Seeker MCA III, Seeker BB-2 and Seeker Lite² Leakage Detectors. The Seeker Setup Software is used to manage leakage meter configurations including; leakage frequencies, default frequency, tag frequency, display units, tech ID, meter/truck squelch, peak hold, distance correction, GT noise discrimination, antenna correction factors, MCA pairing and firmware updates.
Additionally, the software is used to manage mobile communication adapter (MCA) configurations including; display units, truck ID, vehicle shutdown timer, peak hold, early detection notification (EDN), LAW Server Upload Settings, home zone, network connections (Ethernet, Wi-Fi, Cellular & Bluetooth), GPS pass through, remote upload, fleet management and firmware updates.
All of these settings can be stored locally on the PC, which is useful if the user organization has several devices and wants to create and maintain standard configurations for all of them. Devices can be connected to the software via Ethernet, Mini USB Cable (included) or Serial Data Cable (included). The complete kit includes: Seeker Setup Software on CD, Mini USB Charge/Data Cable (I/O-20) and Seeker Lite² Data Cable (I/O-17). MINIMUM PC REQUIREMENTS: WINDOWS XP OR HIGHER (32 OR 64 BIT), PENTIUM III OR HIGHER PROCESSOR, 64 MB RAM, 100 MB FREE STORAGE SPACE, VIDEO ADAPTER & MONITOR (256 COLORS, 1024 x 768 DPI), KEYBOARD AND MOUSE.
Change of Warranty Document for Trilithic Products
Effective April 2, 2018, new purchase orders for Trilithic products and services shall be issued to VIAVI Solutions and sent to VIAVI’s order processing centers.
VIAVI Warranty will apply to All Trilithic Products Purchased After April 2, 2018
VIAVI remains committed to serving as your single trusted partner for Trilithic products and services. While the terms and conditions statement changes to VIAVI the length of Warranty provided by Trilithic remains the same for all products.
VIAVI - Warranty, Terms and Conditions
If you need assistance or if you have questions, please reach out to your local VIAVI Solutions Customer Care team.
The following products carry a Manufacturer's One Year Warranty
| 120 DSP | 180 DSP |
| I-Stop | TLB-GbE |
| MCV-1 | TLB-46 |
| 802 AWE |
The following products carry a Manufacturer's Two Year Warranty
| Field Analyzers | Leakage Equipment | Monitoring & Maintenance |
| 360 DSP | Seeker Lite² | 8310 RSA |
| 720 DSP | Seeker | 8300A FST |
| 1G DSP | Seeker D | 860 DSPh & 860 DSPh Input Expander |
| RSVP² | Seeker D Lite & Seeker D Lite Source Transmitter | 9581 SST |
| Seeker HL & Seeker HL Source Transmitter | 8380 RPC | |
| Seeker MCA III | ||
| CT-4 |
The following products carry a Dell Three Year Warranty
| All Specially Configured Dell PowerEdge 2U Rack Mount Server products are warranted against defects in materials or workmanship for a minimum of three years after shipment. Dell provides next business day, parts and labor, on-site response for the following Trilithic products. |
| LAW Server Package |
| ViewPoint Integrated Server Package |