9581 SST

Return Path Analyzer

The 9581 SST Return Path Analyzer is the only DSP-based return path analyzer in the industry.

The 9581 SST Return Path Analyzer is the only DSP-based return analyzer in the industry.

  • Return Path Analyzer
  • High-speed DSP-based ingress monitoring
  • Align & Troubleshoot reverse path quickly & Easily
  • Supports 860 DSPi (R3, R4 and R5) and RSVP² (R3 and R4) field units
  • Cost effective, scalable
Capture ingress at the speed of DSP

The 9581 SST Return Path Analyzer is the centerpiece of the Guardian Return Path Maintenance System, supporting Trilithic field units and supplying monitoring data to local and remote controllers.

The only DSP-based return path analyzer in the Industry, the 9581 SST is as cost-effective as it is fast and versatile. It can scan the entire ingress spectrum in less than 90 milliseconds (200 times faster than analog instrumentation can), effectively capturing transient ingress bursts that are especially disruptive to telephone and high-speed data services.

The 9581 SST accepts 16 inputs and covers the reverse spectrum from 0.3 MHz to 65 MHz. Because of DSP, these analyzers are unequaled for detecting ingress bursts occurring at low repetition rates. When set to its fastest scanning mode, the 9581 SST rescans all connected test points 80 times per second, making it virtually impossible for any relevant ingress impulses to escape detection.

Each return path unit occupies only 2U (3.5”) of rack space and lets the operator view spectrum data directly on a screen, stream data to the 860 DSPi (R3, R4, and R5) and RSVP² (R3 and R4) field units, or output data to a Communications Manager, which manages the transmission of ingress data to remote monitoring controllers. Versatile, Flexible and Scalable

The 9581 SST analyzer simultaneously supports:

  • Installation tests
  • Distribution sweep and maintenance
  • Return path performance monitoring

Each 9581 SST can:

  • Support up to 16 individual nodes
  • Support up to 12 distribution techs
  • Support dozens of installers
  • Send traps and live spectrum data to as many as 64 server sites

 

AC Power Cable for Trilithic Products - EURO
Request a Quote

Euro AC power cable for Trilithic products. This is a Euro standard 2.5 Meter power cable with a Continental Europe 2-prong plug Male (IEC 884/CEE 7/VII) to 3-pin shroud plug Female (IEC 320C13).

USED AS REPLACEMENT FOR FOLLOWING EURO PRODUCTS: 180 DSP, 360 DSP, 720 DSP, 8300 FST, 8300A FST, 860 DSPh, 860 DSPi, 860 DSPr & 1G DSP.

USED AS ACCESSORY FOR FOLLOWING US PRODUCTS: CT-2, CT-3, CT-4, 8310 RSA, 860 DSP, 860 DSPh Input Expander, 9581 SST R3, 9581 SST R4, 9581 SST R5 & 9581 TPX.

CAT5e Ethernet Patch Cable - 6 Foot
Request a Quote
CAT5e Ethernet patch cable (6 foot) with 100 Ohm impedance and RJ-45 Male to Male connectors.
9581 SST R4
Return Path Analyzer (65 MHz)
Request a Quote

Rack mounted (2U) 65 MHz unit with US Data Frequencies (50.00-53.75 MHz or 70.00-75.75 MHz) or International Data Frequencies (80.5-92 MHz or 104-115 MHz), Two TPM-8 Options & ECM + SNMP Communication Interface and built-in 120/240 VAC power supply or -48VDC. The 9581 SST R4 is optimized for status monitoring in medium to high density node applications and spectrum analysis of the return path up to 65 MHz via the ViewPoint Server with Return Path Management (RPM) Module. The 9581 SST R4 provides the combination of resolution, detector mode and an embedded SNMP agent option while simultaneously supporting return sweep, ingress troubleshooting and continuity testing applications. TraffiControl is included in this release. The complete kit includes: 9581 SST R4 rack mounted (2U) 65 MHz unit with US or International Data Frequencies, built-in 120/240 VAC power supply and AC power cable or -48VDC input. REQUIRES SST CONFIGURE PC SOFTWARE FOR CONFIGURATION. REQUIRES VIEWPOINT SERVER SOFTWARE OR INTEGRATED SERVER WITH RPM MODULE FOR ANALYSIS. ANALYSIS CAN BE ALSO BE PERFORMED WITH LEGACY VIEWER II SERVER SOFTWARE OR INTEGRATED SERVER.

9581 SST R5
Return Path Analyzer (85 MHz)
Request a Quote

Rack mounted (2U) 85 MHz unit with built-in 120/240 VAC power supply or -48 VDC that is optimized for status monitoring in medium to high density node applications and spectrum analysis of the return path up to 85 MHz via the ViewPoint Server with Return Path Management (RPM) Module. The 9581 SST R5 provides the combination of resolution, detector mode and an embedded SNMP agent option while simultaneously supporting return sweep, ingress troubleshooting and continuity testing applications. TraffiControl is included in this release. The complete kit includes: 9581 SST R5 rack mounted (2U) 85 MHz unit with built-in 120/240 VAC power supply and AC power cable or -48VDC input. REQUIRES SST CONFIGURE PC SOFTWARE FOR CONFIGURATION. REQUIRES VIEWPOINT SERVER SOFTWARE OR INTEGRATED SERVER WITH RPM MODULE FOR ANALYSIS. ANALYSIS CAN BE ALSO BE PERFORMED WITH LEGACY VIEWER II SERVER SOFTWARE OR INTEGRATED SERVER. THIS UNIT IS NOT COMPATIBLE WITH THE RSVP² FIELD UNIT.

No Image.
US Model Option
Request a Quote
No Image.
Euro Model Option
Request a Quote
No Image.
120 to 240 VAC Power Input
Request a Quote
No Image.
-48 VDC Power Input
Request a Quote
AC Power Cable for Trilithic Products - US
Request a Quote

AC power cable for Trilithic products. This is a US standard 6 Foot power cable with a 3-prong grounded plug Male (NEMA 5-15P) to 3-pin shroud plug Female (IEC 320C13).

USED AS REPLACEMENT FOR FOLLOWING US PRODUCTS: CT-2, CT-3, CT-4, 180 DSP, 360 DSP, 720 DSP, 8300 FST, 8300A FST, 8310 RSA, 860 DSP, 860 DSPh, 860 DSPh Input Expander, 860 DSPi, 860 DSPr, 1G DSP, 9581 SST R3, 9581 SST R4, 9581 SST R5 & 9581 TPX.

PC Software for the 9581 SST
Request a Quote

This is the SST Configure software for the 9581 SST R3, 9581 SST R4, & 9581 SST R5 Return Path Analyzers. The SST Configure Software is used to manage return path analyzer configurations including; link/sweep frequencies, nominal level, tap value, spectrum offset, IP settings, ECM profile management, SNMP trap settings (destination, community name, trap type), alarm/trap mode, profile alarm settings (alarm/upgrade and clear/downgrade curve violations per sample, ingress mode/type, SST side A/B, alarm thresholds), SNMP settings, user/security settings, device/hub/node naming, monitoring mode, detector mode and firmware updates.

All of these settings can be stored locally on the PC, which is useful if the user organization has several devices and wants to create and maintain standard configurations for all of them. Devices can be connected to the software via Ethernet or DB-9 Straight Through Serial Data Cable.

The complete kit includes: SST Configure Software on CD.

MINIMUM PC REQUIREMENTS: WINDOWS XP OR HIGHER (32 OR 64 BIT), PENTIUM III OR HIGHER PROCESSOR, 64 MB RAM, 100 MB FREE STORAGE SPACE, VIDEO ADAPTER & MONITOR (256 COLORS, 1024 x 768 DPI), KEYBOARD AND MOUSE.

 

9581 SST R4 Internal Ethernet Interface (ECM + SNMP) - Factory Upgrade
Factory Hardware Upgrade
Request a Quote

Internal Ethernet interface with SNMP agent for status monitoring with Viewer II software.

9581 SST & TPX Test Point Manager Replacement PCB Board (TPM-8) - Factory Upgrade
Factory Hardware Upgrade
Request a Quote

This is Test Point Manager (TPM) PCB board that replaces a previously installed TPM-8. This only includes replacement PCB board, must reuse original mounting hardware and RF cables.

 

 

9581 SST R4 Test Point Manager (TPM-8) - Factory Upgrade
Factory Hardware Upgrade
Request a Quote

The Test Point Manager (TPM) option equips SSTs or TPXs to monitor up to 8 Headend test points per TPM-8 installed.