The 1G DSP™ conveniently combines CATV, DOCSIS 3.1 Cable Modem, Gigabit Ethernet, and Optical testing in a single meter for troubleshooting and maintenance of your entire HFC plant.
Trilithic’s 1G DSP™ conveniently combines CATV, DOCSIS 3.1 Cable Modem, Gigabit Ethernet, and Optical testing in a single meter for troubleshooting and maintenance of your entire HFC plant.
Maintaining the health of your plant can now be achieved with one instrument, including everything needed for system-wide testing. Eliminate the need for multiple instruments with CATV, DOCSIS 3.1 Cable Modem, Gigabit Ethernet, and Optical testing, and save capital expenses at the same time.
Tailored for the challenges faced by maintenance technicians, this meter comes equipped with all of the powerful troubleshooting tools for the experienced tech, yet helps simplify decision making and streamlines standard processes and procedures for the more novice tech. This results in more efficient technicians, greater overall system health, and allows techs to continue using the same meter as they become more experienced.
Used in combination with other 720 DSP or 1G DSP field analyzers or the 2401 TLB headend Ethernet loopback device, the 1G DSP can achieve throughput testing speeds of up to 1 GbE using a dedicated test port.
The 1G DSP can perform either roundtrip or one-way measurements of Key Parameter Index (KPI) for full Ethernet service testing. With constant payload testing for Layer 2 through Layer 4, the 1G DSP is built for verification of both Ethernet Service Level Agreement (SLA) and Quality of Service (QoS) metrics with support for BERT and Loopback testing standards.
The 1G DSP includes a single input port for measurement of single mode (1310 nm, 1490 nm, and 1550 nm) wavelengths with interchangeable FC, SC, and ST style adapters.
The 1G DSP features a large, high-resolution, ultra-bright, color touchscreen interface, simple pass/fail indicators, and powerful autotest apps to streamline troubleshooting and make the technician’s job easier.
Everything about this next-gen meter was built with the technician in mind—from the included Bluetooth adapter for remote control of the meter via an iPad, to the long battery life, quick charge time, and glow in the dark keypad for those dark, cramped spaces. This meter also includes a visual fault locator (VFL) that makes it easy for the technician to locate and identify loss points in patch cords, patch panels, and enclosures.
Providing the widest range of functions for an installer available today (as standard options), the 1G DSP includes virtually all the testing options an installer or service technician needs to verify service quality and easily identify and fix problems in the field.
The 1G DSP features next-generation autotest applications that practically walk the technician through a job. By performing standardized measurement tests at various required locations on the job site using user set test plans, channel plans, and limit sets, the meter very clearly indicates (using color and symbols) what areas still need attention, before the technician leaves the job site.
Multi-user support allows technicians that work in various territories to easily switch channel plans, standardized autotest apps, and test limits or login as a completely different user. Connecting to ViewPoint allows techs to upload job data in near real-time as well as transmit and receive channel plans, autotests, and firmware.
Leaving less room for entry error, this new simple user interface can translate into less training and more efficient time in the field for techs. The 1G DSP comes equipped with all of the required troubleshooting tools for the advanced technician, it also offers a higher comfort factor for novice technicians, reducing decision making in the field, which can ultimately result in more productive work days and more satisfied customers.
Field operations managers can now easily verify that all of their technicians are performing the proper tests and are doing so at the right place and time—in near-real time. The potential benefits include identifying techs who need additional training, improving team performance, reducing truck rolls, and cutting operating costs.
At a higher level, ViewPoint can deliver simple, standardized, system-wide reports and dashboards that can help a director or VP of technical operations view the entire operation at a glance to gain information that can be used to reduce service and repeat trouble calls.
Essentially, this integrated system approach allows cable operators to see much more of their certification operations and use the information in practical ways. The insights can enable them to identify both localized problems and high-level system issues to make decisions based on a clearer understanding of their overall operations and the associated ROI.
Combining 1G DSPs in the field with the new ViewPoint WFM Module in the back office, managers can view the health of their entire system—in near real-time, for total RF installation management.
Combining the 180 DSP, 360 DSP, 720 DSP & 1G DSP meters in the field with the new ViewPoint Integrated Server in the back office, managers now have simplified access to intelligent management tools for monitoring, assessing, and improving the efficiency of their total operation, while making it even easier to obtain consistent, repeatable results that give supervisors that birds-eye view of the field for Total System Management.
By unifying an entire MSO’s field operations in one convenient dashboard, managers can easily verify compliance and quality throughout the entire plant, either by home, system, region, division, or any other attribute from a billing system.
This simple and completely customizable integrated system of field analysis and reporting tools allows managers to watch over their entire field operations in one dashboard, comparing each location in the system, analyzing the overall health of their entire organization, and addressing concerns in near real-time.
The I-Stop is a 1 GHz reverse test probe that is used with signal level meters for bi-directional measurements with no risk of power damage to the meter. Just screw the probe into a distribution tap's unused KS port and a spring-loaded stinger; connects a 20 dB resistive test point circuit to the hardline. The bi-directional connection lets a meter or analyzer measure forward and reverse signals, as well as reverse ingress. A built-in AC/DC blocking circuit protects the meter or analyzer from damage from online power up to 90 volts. The I-Stop also works with both the Original and New DSP Family of Field Analyzers and the 9581 SST to let you track reverse ingress sources down to the nearest tap without removing reverse modules or diplexers and without disrupting forward or reverse service.
The TLB-46 is a 46 MHz return lowpass filter. This high-quality low pass filter will ensure no forward signals are getting into the device this is connected to. This is most commonly used with any Signal Level meter.
The Lightel DI-1000 is an all-digital optical inspection scope for use with the 1G DSP or a PC. The scope connects directly to the USB port of the 1G DSP and features single finger focus and detectable resolution to 0.5 um. Includes the standard ConnectorView PC software which features digital zoom, image display, image capture with built-in freeze/capture button on scope, auto-calibration and basic analysis tools.
The complete kit includes the DI-1000 Optical Inspection Scope, Protective Carrying Case, One (1) Universal Tip for 2.5 mm male APC Type Connectors, One (1) Tip for SC and FC female APC Type Connectors, Tip Case, ConnectorView (standard) Software CD and Manual. The Optical Inspection Scope (OIS) Option (P/N 0930207010) for the 1G DSP is not included with the DI-1000 and must be activated before using a DI-1000 optical inspection scope with the 1G DSP.
This is a software and hardware package that includes a software activation key for the Optical Inspection Scope Option (OIS) on the 1G DSP and a Lightel DI-1000 all-digital optical inspection scope. The scope connects directly to the USB port of the 1G DSP and features single finger focus and detectable resolution to 0.5 um. Includes the standard ConnectorView PC software which features digital zoom, image display, image capture with built-in freeze/capture button on scope, auto-calibration and basic analysis tools.
The complete kit includes the software activation key (P/N 0930207010), DI-1000 Optical Inspection Scope (P/N 2011749000), Protective Carrying Case, One (1) Universal Tip for 2.5 mm male APC Type Connectors, One (1) Tip for SC and FC female APC Type Connectors, Tip Case, ConnectorView (standard) Software CD and Manual.
When activated in a 1G DSP, the Optical Inspection Scope Option (OIS) provides the ability to view the input from a Lightel DI-1000 optical inspection probe. This option must be activated before being able to use a DI-1000 optical inspection scope with the 1G DSP.
AC to DC Power Adapter & Battery Charger without AC Power Cable for the New DSP Family of Signal Level Meters. This is a standard AC to DC power supply (Input: 90 - 220 VAC, Output 15 VDC, 3.3 Amp). Can be used to replace the AC to DC adapter & battery charger that is included with the following products: 180 DSP, 360 DSP, 720 DSP & 1G DSP.
Replacement carrying case for the 1G DSP.
Shoulder strap for use with the Original and New DSP Meter Families.
AC power cable for Trilithic products. This is a US standard 6 Foot power cable with a 3-prong grounded plug Male (NEMA 5-15P) to 3-pin shroud plug Female (IEC 320C13). USED AS REPLACEMENT FOR FOLLOWING US PRODUCTS: CT-2, CT-3, CT-4, 180 DSP, 360 DSP, 720 DSP, 8300 FST, 8300A FST, 8310 RSA, 860 DSP, 860 DSPh, 860 DSPh Input Expander, 860 DSPi, 860 DSPr, 1G DSP, 9581 SST R3, 9581 SST R4, 9581 SST R5 & 9581 TPX.
This is the free ViewPoint Express configuration software for the 180 DSP, 360 DSP, 720 DSP & 1G DSP field analyzers.
The ViewPoint Express software is used to manage device configurations including; Test Locations, Limit Sets, Channel Presets, Channel Plans, Autotests, Packages, Meter Settings, and Meter Syncing. Devices can be connected to the software via Ethernet.
Additionally, the ViewPoint Express software includes an optional data management feature that captures data uploaded from field devices and allows you to view text and graphical displays of the measurement results and adjust live markers to further analyze the captured data.
By default, the data management feature will be deactivated. A license key for this feature can be purchased and activated by phone, contact Trilithic Sales for more information.
MINIMUM PC REQUIREMENTS: WINDOWS XP OR HIGHER (32 or 64 bit), MICROSOFT .NET Framework 4.0 and a Web Browser (Internet Explorer, Chrome, Firefox or Safari), 1 GHz Processor, 2 GB RAM, 100 GB Storage Space, Optical Drive, Video Adapter, Monitor, Keyboard and Mouse.
Server application enables a proprietary connection with the Original or New DSP Family of Field Analyzers for communication and testing Packet Loss, Latency, Jitter and MOS of VoIP services. Includes separate pass/fail results for forward and return path troubleshooting. In addition to the VoIP tests, this software enables high speed throughput tests with speeds up to 300 Mbps via modem, 90 mbps via RJ-45 (10/100) or 400 mbps via Electrical RJ-45 or Optical SFP Ethernet (10/100/1000), and can also be used as a ping test reflector.
All repairs carry a 90-day warranty against defects in replacement parts and repair workmanship.
All Trilithic products are warranted against defects in materials or workmanship for a minimum of one year after shipment to the original purchaser.
Trilithic's obligation under this warranty is limited to the repair or replacement of the product after being returned to our factory, and Trilithic determining the product be indeed defective.
This is Trilithic's sole warranty and is given in lieu of all other warranties, expressed or implied, including warranties of merchantability or fitness for a particular purpose and sets forth the buyers sole remedy.
|8831Q & 8853Q||TLB-GbE|
|Ethernet, IP & Wireless||Field Analyzers||Leakage Equipment||Monitoring & Maintenance|
|802 AWE||120 DSP||Seeker Lite²||8310 RSA|
|MetroNet 5021, 5121 & 5201||180 DSP||Seeker||8300 FST & 8300A FST|
|360 DSP||Seeker D||860 DSPr|
|720 DSP||Seeker D Lite||860 DSPh & Input Expander|
|1G DSP||Seeker D Lite Source Transmitter||9581 SST|
|860 DSPi||Seeker MCA III||9581 TPX|
|860 DSP||CT-2, CT-3 & CT-4||8380 RPC|
|Seeker MCA III||RSVP²|
All Specially Configured Dell PowerEdge 2U Rack Mount Server products are warranted against defects in materials or workmanship for a minimum of three years after shipment. Dell provides next business day, parts and labor, on-site response for the following Trilithic products.
|ADIA Integrated Server Package|
|Guardian II Integrated Server Package|
|LAW Server Package|
|TDM Integrated Server Package|
|ViewPoint Integrated Server Package|
Trilithic, Inc. ("Trilithic") warrants to the buyer that the product will be free from defects in materials and workmanship, under normal use, operating conditions and service for a period of one (1) or two (2) years from date of delivery based on the type of product as listed above. Trilithic reserves the right, before having any obligation under this limited warranty, to inspect the damaged product, and all costs of shipping the product to Trilithic for inspection shall be borne solely by the buyer. Trilithic's obligation under this limited warranty shall be limited, at Trilithic's sole option, to replacing or repairing the product, or to replacing or repairing any defective part. F.O.B. Indianapolis, Indiana. If neither of the two options is reasonably available, then Trilithic, in its sole discretion, may provide a prorated refund to the buyer of the purchase price of the product, as evidenced by the proof of purchase, less any applicable service fees in accordance with the following schedule:
Product with two (2) year warranty: months 0-3 = 100%; months 4-12 = 50%; and months 13-24 = 25%.
Product with one (1) year warranty: months 0-1 = 100%; months 2-6 = 50%; and months 7-12 = 25%.
Batteries and fans are not included or covered by the limited warranty. Any product or part that is repaired or replaced under this limited warranty shall be covered only for the remainder of the original warranty period which applied to the original product or part, or for ninety (90) days, whichever is longer. All products or parts that are exchanged for replacement shall become the property of Trilithic.
In order to recover under this limited warranty, buyer must make a written claim to Trilithic within sixty (60) days of the occurrence and must present acceptable proof of original ownership of the product (such as an original receipt, purchase order or similar documentation). In order for this limited warranty to be effective, the product must have been handled and used as set forth in the documentation accompanying the product and/or its packaging. This limited warranty shall not apply to any damage due to accident, misuse, abuse, neglect, fire or other casualty. Further, this limited warranty shall not apply to any product which has been altered or where the damage was caused by a part not supplied by Trilithic. Trilithic retains the final decision whether a product is within warranty conditions.
THE REMEDY SET FORTH HERIN SHALL BE THE ONLY REMEDY AVAILABLE TO THE BUYER AND TO THE FULLEST EXTENT PERMITTED BY LAW, IN NO EVENT SHALL TRILITHIC BE LIABLE FOR ANY SPECIAL, INCIDENTAL, PUNITIVE OR CONSQUENTIAL DAMAGES, INCLUDING BUT NOT LIMITED TO, LOST REVENUES, LOST PROFITS, LOSS OF USE OF SOFTWARE, LOSS OR RECOVERY OF DATA, DOWNTIME, REPLACEMENT EQUIPMENT AND ANY THIRD PART CLAIMS ARISING OUT OF ANY THEORY OF RECOVERY INCLUDING WARRANY, CONTRACT, STATUTORY OR TORT IN CONNECTION WITH THE PRODUCT, EVEN IF TRILITHIC HAS BEEN ADVISED OF THE POSSIBILITY OF SUCH DAMAGES. NOTWITHSTANDING THE FOREGOING, IN THE EVENT THAT THIS LIMITED WARRANTY FAILS OF ITS ESSENTIAL PURPOSE, IN NO EVENT SHALL TRILITHIC'S ENTIRE LIABILITY TO BUYER EXCEED THE PURCHASE PRICE OF THE DEFECTIVE PRODUCT.
EXCEPT FOR THE LIMITED WARRANTY PROVIDED HEREIN, TO THE FULLEST EXTENT PERMITTED BY LAW, TRILITHIC DISCLAIMS ALL WARRANTIES, EXPRESSED OR IMPLIED (INCLUDING WITHOUT LIMITATION ANY IMPLIED WARRANTIES OR MERCHANTABILITY OR FITNESS FOR A PARTICULAR PURPOSE), WITH RESPECT TO THE PRODUCT OR ITS SUITABILITY FOR ANY USE INTENDED FOR IT BY THE BUYER. TO THE EXTENT ANY IMPLIED WARRANTIES MAY NONETHELESS EXIST BY OPERATION OF LAW, ANY SUCH WARRANTIES ARE LIMITED TO THE DURATION OF THIS LIMITED WARRANTY.
This limited warranty is non-transferable. This limited warranty does not affect any other legal rights buyer may have by operation of law. No agent, reseller, distributor or business partner of Trilithic is authorized to modify the terms of this limited warranty on behalf of Trilithic.