Searcher Plus (S/N Below 128000) Battery

NiCAD battery for Searcher Plus Leakage Detectors with serial numbers below 128000.

Searcher Plus (S/N Above 128000), Searcher Plus GT & Super Plus Battery

Ni-MH battery for Searcher Plus Leakage Detectors with serial numbers above 128000 and all, Searcher Plus GT & Super Plus Leakage Receivers.
RSVP² Battery

RSVP² Battery

NiCAD battery for the RSVP² Return Path Tester.
860 DSP & 860 DSPi Battery

860 DSP & 860 DSPi Battery

Ni-MH battery for the 860 DSP & 860 DSPi Field Analyzers.

Model One Battery

Model One Battery

NiCAD battery for the Model One Signal Level Meter. This battery includes a white plug (check your unit before ordering).
Model Two & Model Two Lite Battery

Model Two & Model Two Lite Battery

NiCAD battery for the Model Two & Model Two Lite Signal Level Meters.
860 DSPi Internal Modem Battery

860 DSPi Internal Battery

Internal Ni-MH battery for the 860 DSPi. Includes cable modem power connection. Requires a hardware change at factory, call for RMA 317-895-3600.

Seeker Lite, Seeker Lite², & Seeker Battery

Battery

Li-ION battery for the Seeker Lite, Seeker Lite², Seeker, Seeker SE, Seeker D, Seeker D Lite Leakage Detectors, and 120 DSP.

8821Q, 8821Q-R & 8853Q Battery

8821Q, 8821Q-R, 8831Q & 8853Q Battery

Li-ION battery for the 8821Q, 8821Q-R & 8853Q Spectrum Analyzer.
AC U.S. Power Cable for Trilithic Products

AC Power Cable for Triltihic Products - US

AC power cable for Trilithic products. This is a US standard 6 Foot power cable with a 3-prong grounded plug Male (NEMA 5-15P) to 3-pin shroud plug Female (IEC 320C13). USED AS REPLACEMENT FOR FOLLOWING US PRODUCTS: CT-2, CT-3, CT-4, 180 DSP, 360 DSP, 720 DSP, 8300 FST, 8300A FST, 8310 RSA, 860 DSP, 860 DSPh, 860 DSPh Input Expander, 860 DSPi, 860 DSPr, 1G DSP, 9581 SST R3, 9581 SST R4, 9581 SST R5 & 9581 TPX.

AC Euro Power Cable for Trilithic Products

AC Power Cable for Trilithic Products - EURO

Euro AC power cable for Trilithic products. This is a Euro standard 2.5 Meter power cable with a Continental Europe 2-prong plug Male (IEC 884/CEE 7/VII) to 3-pin shroud plug Female (IEC 320C13). USED AS REPLACEMENT FOR FOLLOWING EURO PRODUCTS: 180 DSP, 360 DSP, 720 DSP, 8300 FST, 8300A FST, 860 DSPh, 860 DSPi, 860 DSPr & 1G DSP. USED AS ACCESSORY FOR FOLLOWING US PRODUCTS: CT-2, CT-3, CT-4, 8310 RSA, 860 DSP, 860 DSPh Input Expander, 9581 SST R3, 9581 SST R4, 9581 SST R5 & 9581 TPX.
860 DSP & 860 DSPi Input (F) Connectors

Input F-Connectors for Original and New DSP Family

Replacement input F-connectors for the Original and New DSP Family of field analyzers. Threaded Female to Female F-connector. MINIMUM QUANTITY OF PURCHASE IS 25 PIECES.

F Style Push On Adapters

F Style Push On Adapters

Lab-quality push on F-Connector adapter for precision measurements. Threaded Female F-connector to Male push on F-connector.
860 DSP & 860 DSPi Shoulder Strap (ST-2)

Shoulder Strap (ST-2)

Shoulder strap for use with the Original and New DSP Meter Families.

Strand Hook

Strand Hook

Strand hook for use with the Original and New DSP Meter Families.
9580 SST RJ-45 to DB-9 Adapter

9580 SST RJ-45 to DB-9 Adapter

RJ-45 (female) to serial DB-9 (female) adapter for the 9580 SST.
Tricorder Power Adapter & Battery Charger - 120 V

Tricorder AC to DC Power Adapter & Battery Charger - 110 VAC

AC to DC power adapter & battery charger for the Tricorder. 110 VAC

Tricorder AC to DC Power Adapter & Battery Charger - 220 VAC

AC to DC power adapter & battery charger for the Tricorder. 220 VAC
AC to DC Power Adapter for Trilithic Products (CE Approved)

AC to DC Power Adapter & Battery Charger for Trilithic Products - CE

AC to DC power adapter & battery charger for CE Approved Trilithic Products. This is a CE Approved AC to DC power supply (220/240 VAC). Can be used to replace the AC to DC adapter & battery charger that is included with the following products: CT-2 (CE Approved), CT-3 (CE Approved), 9580 SST, and 9580 SSR.
RSVP² Power Adapter & Battery Charger

AC to DC Power Adapter & Battery Charger for RSVP² and EAS PS-23

AC to DC power adapter & battery charger for the RSVP² Reverse Path Tester and EAS SW-2A and SW-3A baseband video switched.

Model One Power Adapter & Battery Charger

Model One AC to DC Power Adapter & Battery Charger

AC to DC power adapter & battery charger for the Model One. 100 - 240 VAC.
AC to DC Power Adaptor & Battery Charger for Trilithic Products

AC to DC Power Adapter & Battery Charger for Trilithic Products - US

AC to DC power adapter & battery charger for Trilithic Products. This is an AC to DC power supply with a 6 Foot US power cable with a 3-prong grounded plug Male (NEMA 5-15P) to 3-pin shroud plug Female (IEC 320C13). Can be used to replace the AC to DC adapter & battery charger that is included with the following products: 8300 FST (8 MHz Euro DOCSIS), 860 DSP, 860 DSPh with Euro Power Supply, 860 DSPi and 860 DSPr with Euro Power Supply.

Model Two & Model Two Lite Power Adapter & Battery Charger

Model Two & Model Two Lite AC to DC Power Adapter & Battery Charger

AC to DC power adapter and battery charger (fast charging) for the Model Two & Model Two Lite Signal Level Meters. Universal 100 - 240 VAC.
Seeker Lite Power Adapter & Battery Charger

Seeker Lite AC to DC Power Adapter & Battery Charger

AC to DC power adapter & battery charger for the Seeker Lite.
Seeker Lite Vehicle Power Adapter (CL-7)

Seeker Lite Vehicle Power Adapter (CL-7)

Vehicle power adapter for the Seeker Lite.
Seeker Lite² Power Adapter & Battery Charger

Seeker Lite² AC to DC Power Adapter & Battery Charger with Power Cable

AC to DC power adapter & battery charger for the Seeker Lite². Charger provides a Type-A USB Socket for use with TYPE-A USB power cables. Includes a Serial to Type-A USB Power Cable (P/N 2071585002) for use with the Seeker Lite².

Seeker Lite² Vehicle Power Adaptor (CL-8)

Seeker Lite² Vehicle Power Adapter (CL-8)

Vehicle power adapter for the Seeker Lite².

AC to DC Power Adapter & Battery Charger with USB Charge & Data Cable

AC to DC power adapter & battery charger for the Seeker, Seeker SE, Seeker D, Seeker D Lite, 120 DSP, and 802 AWE. Charger provides a Type-A USB Socket for use with TYPE-A USB power cables. Includes a Type-A USB to Mini USB Charge/Data Cable (I/O-20).

Vehicle Power Adapter with USB cable (CL-9)

Vehicle Power Adapter with USB cable (CL-9)

Vehicle power adapter for the Seeker, Seeker SE, Seeker D, Seeker D Lite, 120 DSP, and 802 AWE. The Vehicle Power Adapter (CL-9) is not needed if using the Seeker or Seeker D Mobile Mounts and the Mobile Mount Power Cable that is included with the Seeker, Seeker SE, Seeker D.

Model Three & M3 Plus International Power Adapter Kit

International power adapter kit for the Model Three & M3 Plus that includes power adapters for the UK, Europe and Australia. The Model Three or M3 Plus charger is required to use this kit.

8821Q, 8821Q-R & 8853Q Power Adapter & Battery Charger

8821Q, 8821Q-R, 8831Q & 8853Q AC to DC Power Adapter & Battery Charger

AC to DC power adapter & battery charger for the 8821Q, 8821Q-R, 8831Q & 8853Q Spectrum Analyzers.
ConfigR Software for the RSVP²

ConfigR Software for the RSVP²

This is the ConfigR configuration software for the RSVP². The complete kit Includes: ConfigR Software on CD and RSVP² Data Cable (I/O-6). MINIMUM PC REQUIREMENTS: WINDOWS XP OR HIGHER (32 OR 64 BIT), PENTIUM III OR HIGHER PROCESSOR, 64 MB RAM, 100 MB FREE STORAGE SPACE, VIDEO ADAPTER & MONITOR (256 COLORS, 1024 x 768 DPI), KEYBOARD AND MOUSE.

NCM-4 Setup Software for 9580 SST

NCM-4 Setup Software for the 9580 SST

This is the NCM-4 Setup configuration software for the 9580 SST. The complete kit includes: NCM-4 Configuration Software on CD and NCM-4 Data Cable (I/O-10). MINIMUM PC REQUIREMENTS: WINDOWS XP OR HIGHER (32 OR 64 BIT), PENTIUM III OR HIGHER PROCESSOR, 64 MB RAM, 100 MB FREE STORAGE SPACE, VIDEO ADAPTER & MONITOR (256 COLORS, 1024 x 768 DPI), KEYBOARD AND MOUSE.
DIA Suite Software for the 9580 SST & 9581 SST

DIA Suite PC Software for 9580 SST

This is the DIA Suite with Ingress ManagR, CompressR and ProfilR analysis software for the 9580 SST Return Path Analyzers. The DIA Suite software is used to display max, min, average, ADISP, channel availability and waterfall diagram. Devices can be connected to the software via modem, Ethernet, or serial data cable. The complete kit includes: DIA Suite with Ingress ManagR, CompressR and ProfilR Software on CD. MINIMUM PC REQUIREMENTS: WINDOWS XP OR HIGHER (32 OR 64 BIT), PENTIUM III OR HIGHER PROCESSOR, 64 MB RAM, 100 MB FREE STORAGE SPACE, VIDEO ADAPTER & MONITOR (256 COLORS, 1024 x 768 DPI), KEYBOARD AND MOUSE.
Ingress ManagR Software for the 9581 SST R3

Ingress ManagR Software for the 9581 SST R3

Ingress monitoring software for 9581 SST R3. Requires NCM-4 installed in the SST.

Power Pack Option (PP-1)

Power Pack Option (PP-1) for Original DSP Family

Software Upgrade Option

When installed in an 860 DSPi, this option extends the spectrum analyzer range to 1 GHz (300 kHz RBW only), adds CSO/CTB Test, Web Browser and Connectivity Test, HUM, C/N, Depth of Modulation, FM Deviation, Full Channel Scan (channel plan), and Sweepless Sweep Mode.
QAM Option (QA-2)

QAM Option (QA-2) for Original DSP Family

Software Upgrade Option

When installed in an 860 DSPi, this option adds Constellation and Equalizer Display to the 860 DSPi. Field installable. REQUIRES POWER PACK OPTION.

Forward Sweep Option (FS-1)

Forward Sweep Option (FS-1) for Original DSP Family

Software Upgrade Option

When installed in an 860 DSPi, this option provides compatibility with the 8300 FST Forward SpeedSweep Transmitter. REQUIRES POWER PACK OPTION.

Vestigial Side Band Modulation Option (VSB)

Vestigal Side Band Modulation Option (VSB) for Original DSP Family

Software Upgrade Option

When installed in an 860 DSPi, this option allows the operator to connect an off air antenna to the 860 DSPi input port and read Level, MER, BER, and view Constellation and Equalizer Tap Information on 8 VSB and 16 VSB channels. REQUIRES FIRMWARE VERSION V7.4.1.1 or HIGHER. Aftermarket purchases require the Enhanced Digital Video Retrofit (IL-2).
Vertical Interval Test Signals Option (VITS)

Vertical Interval Test Signal Option (VITS) for Original DSP Family

Software Upgrade Option

Allows headend technicians to view Vertical Interval Test Signals (VITS) and specify lines for testing. The option enables the technician to measure differential phase, differential gain, and chroma delay. REQUIRES POWER PACK OPTION.
TraffiControl Option (TC-1)

Traffic Control Option (TC-1) for Original DSP Family

Software Upgrade Option

When installed in and 860 DSPi, this Option provides a way to troubleshoot upstream ingress and noise problems within active channel bands by seeing the ingress that is present underneath an upstream cable modem channel, or any bursty signal. REQUIRES POWER PACK OPTION.
Frequency Domain Reflectometer Option (FDR)

Frequency Domain Reflectometer Option (FDR-1) for Original DSP Family

Software Upgrade Option

When installed in an 860 DSP, the Frequency Domain Reflectometer Option (FDR) provides a simple, convenient and accurate tool for determining the distance to cable faults. The option works by sending a sweep into the cable and analyzing the complex reflected wave to determine the distance to various sources of reflection (opens, shorts, splitters, etc.). The reflecting events are indicated on a distance versus amplitude display, and markers are used to identify the distance to the source of the reflection, and the return loss at that point. REQUIRES RETURN TRANSMITTER BOARD OPTION.

Return Sweep Receiver Option (SR-1)

Return Sweep Receiver Option (SR-1) for Original DSP Family

Software Upgrade Option

When installed in an 860 DSP, this option performs functions of the Trilithic Guardian 9580 SSR Reverse Test Field Unit. Compatible with the Guardian and Guardian II System. REQUIRES RETURN TRANSMITTER BOARD OPTION. This option or the Return Tester RSVP Option (VP-1) is required to enable the Real-Time Transport Protocol Reflector Option (RTP-1).

Return Tester RSVP Option (VP-1)

Return Tester RSVP Option (VP-1) for Original DSP Family

Software Upgrade Option

When installed in an 860 DSPi, this option performs functions of the RSVP². Test capabilities and displays allow RSVP² type testing of 8 frequencies at one time. Compatible with the Guardian and Guardian II System. REQUIRES POWER PACK & RETURN TRANSMITTER BOARD OPTIONS. This option or the Return Sweep Receiver Option (SR-1) is required to enable the Real-Time Transport Protocol Reflector Option (RTP-1).
Spectrum Analyzer Option (SA-1)

Spectrum Analyzer Option (SA-1) for Original DSP Family

Software Upgrade Option

When installed in an 860 DSPi, this option harnesses the power of the 860 DSPi to provide all of the typical and high performance spectrum analyzer capabilities without the complexity, cost and weight of analog alternatives. REQUIRES POWER PACK OPTION.
QAM Option (QA-1)

QAM Option (QA-1) for Original DSP Family

Software Upgrade Option

With this option the 860 DSP analyzes QPSK and all common QAM formats from 4 QAM to 256 QAM, including deep interleave on 256 QAM, presenting constellation diagrams, MER, EVM and calculated BER, both pre and post FEC.
WorkBench

WorkBench PC Software for the Original DSP Family

This is the full featured WorkBench configuration software for the 860 DSP, 860 DSPi, 860 DSPh, and 860 DSPr analyzers and the 8300 FST Forward SpeedSweep Transmitter. The WorkBench software is used to manage device configurations including; device interface settings, global device settings, measurement mode settings, network settings, channel plans, locations, limit sets, autotests, tasks and firmware updates. Additionally, the full featured software includes an advanced datalog analysis feature that captures data uploaded from field devices and allows you to view text and graphical displays of the measurement results and adjust live markers to further analyze the captured data. All of these settings can be stored locally on the PC, which is useful if the user organization has several devices and wants to create and maintain standard configurations for all of them. Devices can be connected to the software via Ethernet or with the included Serial Data Cable (I/O-14). The complete kit includes: WorkBench Software on CD. MINIMUM PC REQUIREMENTS: WINDOWS XP OR HIGHER (32 OR 64 BIT), PENTIUM III OR HIGHER PROCESSOR, 64 MB RAM, 100 MB FREE STORAGE SPACE, VIDEO ADAPTER & MONITOR (256 COLORS, 1024 x 768 DPI), KEYBOARD AND MOUSE.

TDM Component for WorkBench

WorkBench PC Software TDM Component for the Original DSP Family

This is the TDM Component software upgrade to the full featured version of the WorkBench Software. The optional TDM (Trilithic Data Manager) Component sofware allows field technicians to use the Internet to remotely send and receive WorkBench configuration information to/from their field analyzers via the TDM Server Software or Integrated Server Package. Devices can be connected to the WorkBench software via the TDM Server Software. The complete kit includes: TDM Component Software on CD. REQUIRES WORKBENCH PC SOFTWARE & TDM SERVER SOFTWARE OR INTEGRATED SERVER. MINIMUM PC REQUIREMENTS: WINDOWS XP OR HIGHER (32 OR 64 BIT), PENTIUM III OR HIGHER PROCESSOR, 64 MB RAM, 100 MB FREE STORAGE SPACE, VIDEO ADAPTER & MONITOR (256 COLORS, 1024 x 768 DPI), KEYBOARD AND MOUSE.
WorkBench with TDM Component

WorkBench PC Software with TDM Component for the Original DSP Family

This is the full featured WorkBench configuration software with TDM Component for the 860 DSP, 860 DSPi, 860 DSPh, and 860 DSPr analyzers and the 8300 FST Forward SpeedSweep Transmitter. The WorkBench software is used to manage device configurations including; device interface settings, global device settings, measurement mode settings, network settings, channel plans, locations, limit sets, autotests, tasks and firmware updates. All of these settings can be stored locally on the PC, which is useful if the user organization has several devices and wants to create and maintain standard configurations for all of them. Additionally, the full featured software includes an advanced datalog analysis feature that captures data uploaded from field devices and allows you to view text and graphical displays of the measurement results and adjust live markers to further analyze the captured data. Furthermore, the optional TDM (Trilithic Data Manager) Component allows field technicians to use the Internet to remotely send and receive WorkBench configuration information to/from their field analyzers via the TDM Server Software or Integrated Server Package. Devices can be connected to the software via the Ethernet, Included Serial Data Cable (I/O-14) or Internet via TDM Server Software. The complete kit includes: WorkBench with TDM Component Software on CD. REQUIRES TDM SERVER SOFTWARE OR INTEGRATED SERVER. MINIMUM PC REQUIREMENTS: WINDOWS XP OR HIGHER (32 OR 64 BIT), PENTIUM III OR HIGHER PROCESSOR, 64 MB RAM, 100 MB FREE STORAGE SPACE, VIDEO ADAPTER & MONITOR (256 COLORS, 1024 x 768 DPI), KEYBOARD AND MOUSE.
WorkBench Lite

WorkBench Lite PC Software for the Original DSP Family

This is the free WorkBench Lite configuration software for the 860 DSP, 860 DSPi, 860 DSPh, and 860 DSPr analyzers and the 8300 FST Forward SpeedSweep Transmitter. The WorkBench Lite software is used to manage device configurations including; device interface settings, global device settings, measurement mode settings, network settings, channel plans, locations, limit sets, autotests, tasks and firmware updates. All of these settings can be stored locally on the PC, which is useful if the user organization has several devices and wants to create and maintain standard configurations for all of them. Devices can be connected to the software via Ethernet or with the optional Serial Data Cable (I/O-14). Additionally, the WorkBench Lite software includes a limited 30-day evaluation period for you to try the advanced datalog analysis features of WorkBench. The advanced datalog analysis feature captures data uploaded from field devices and allows you to view text and graphical displays of the measurement results and adjust live markers to further analyze the captured data. After 30 days, the advanced datalog analysis feature will be de-activated. To reactivate this feature you will need to purchase a license key for the full featured version of the WorkBench software. The complete kit includes: WorkBench Lite Software on CD. MINIMUM PC REQUIREMENTS: WINDOWS XP OR HIGHER (32 OR 64 BIT), PENTIUM III OR HIGHER PROCESSOR, 64 MB RAM, 100 MB FREE STORAGE SPACE, VIDEO ADAPTER & MONITOR (256 COLORS, 1024 x 768 DPI), KEYBOARD AND MOUSE.

Viewer II - One Additional Client

Viewer II Server or Stand-Alone Server Software - One (1) Client License

Client Software

Unit price for one (1) additional Viewer II Client Software Installation License. REQUIRES VIEWER II SERVER SOFTWARE OR INTEGRATED SERVER.
Viewer II - Six Additional Clients

Viewer II Server or Stand-Alone Server Software - Six (6) Client Licenses

Client Software

Unit price for six (6) additional Viewer II Client Software Installation Licenses. REQUIRES VIEWER II SERVER SOFTWARE OR INTEGRATED SERVER.
9581 SST R4 Internal Ethernet Interface (ECM + SNMP)

9581 SST R4 Internal Ethernet Interface (ECM + SNMP)

Software Upgrade

Internal Ethernet interface with SNMP agent for status monitoring with Viewer II software.
SST Configure Software

SST Configure

PC Software for the 9581 SST

This is the SST Configure software for the 9581 SST R3, 9581 SST R4, & 9581 SST R5 Return Path Analyzers. The SST Configure Software is used to manage return path analyzer configurations including; link/sweep frequencies, nominal level, tap value, spectrum offset, IP settings, ECM profile management, SNMP trap settings (destination, community name, trap type), alarm/trap mode, profile alarm settings (alarm/upgrade and clear/downgrade curve violations per sample, ingress mode/type, SST side A/B, alarm thresholds), SNMP settings, user/security settings, device/hub/node naming, monitoring mode, detector mode and firmware updates.

All of these settings can be stored locally on the PC, which is useful if the user organization has several devices and wants to create and maintain standard configurations for all of them. Devices can be connected to the software via Ethernet or DB-9 Straight Through Serial Data Cable. The complete kit includes: SST Configure Software on CD. MINIMUM PC REQUIREMENTS: WINDOWS XP OR HIGHER (32 OR 64 BIT), PENTIUM III OR HIGHER PROCESSOR, 64 MB RAM, 100 MB FREE STORAGE SPACE, VIDEO ADAPTER & MONITOR (256 COLORS, 1024 x 768 DPI), KEYBOARD AND MOUSE.

 

Seeker Setup Software for the Seeker, Seeker MCA, Seeker BB-2 & Seeker Lite

Seeker Setup PC Software with Seeker Lite Data Cable

Configuration Software

This is the Seeker Setup configuration software for the Seeker, Seeker SE, Seeker D, Seeker MCA, Seeker MCA II, Seeker MCA III, Seeker BB-2 and Seeker Lite Leakage Detectors. The Seeker Setup Software is used to manage leakage meter configurations including; leakage frequencies, default frequency, tag frequency, display units, tech ID, meter/truck squelch, peak hold, distance correction, GT noise discrimination, antenna correction factors, MCA pairing and firmware updates.

Additionally, the software is used to manage mobile communication adapter (MCA) configurations including; display units, truck ID, vehicle shutdown timer, peak hold, early detection notification (EDN), LAW Server Upload Settings, home zone, network connections (Ethernet, Wi-Fi, Cellular & Bluetooth), GPS pass through, remote upload, fleet management and firmware updates.

All of these settings can be stored locally on the PC, which is useful if the user organization has several devices and wants to create and maintain standard configurations for all of them. Devices can be connected to the software via Ethernet, Mini USB Cable (included) or Serial Data Cable (included). The complete kit includes: Seeker Setup Software on CD, Mini USB Charge/Data Cable (I/O-20) and Seeker Lite Data Cable (I/O-16). MINIMUM PC REQUIREMENTS: WINDOWS XP OR HIGHER (32 OR 64 BIT), PENTIUM III OR HIGHER PROCESSOR, 64 MB RAM, 100 MB FREE STORAGE SPACE, VIDEO ADAPTER & MONITOR (256 COLORS, 1024 x 768 DPI), KEYBOARD AND MOUSE.

Seeker Setup Software for the Seeker, Seeker MCA, Seeker BB-2 & Seeker Lite²

Seeker Setup PC Software with Seeker Family Data Cable

Configuration Software

This is the Seeker Setup configuration software for the Seeker, Seeker SE, Seeker D, Seeker MCA, Seeker MCA II, Seeker MCA III, Seeker BB-2 and Seeker Lite² Leakage Detectors. The Seeker Setup Software is used to manage leakage meter configurations including; leakage frequencies, default frequency, tag frequency, display units, tech ID, meter/truck squelch, peak hold, distance correction, GT noise discrimination, antenna correction factors, MCA pairing and firmware updates.

Additionally, the software is used to manage mobile communication adapter (MCA) configurations including; display units, truck ID, vehicle shutdown timer, peak hold, early detection notification (EDN), LAW Server Upload Settings, home zone, network connections (Ethernet, Wi-Fi, Cellular & Bluetooth), GPS pass through, remote upload, fleet management and firmware updates.

All of these settings can be stored locally on the PC, which is useful if the user organization has several devices and wants to create and maintain standard configurations for all of them. Devices can be connected to the software via Ethernet, Mini USB Cable (included) or Serial Data Cable (included). The complete kit includes: Seeker Setup Software on CD, Mini USB Charge/Data Cable (I/O-20) and Seeker Lite² Data Cable (I/O-17). MINIMUM PC REQUIREMENTS: WINDOWS XP OR HIGHER (32 OR 64 BIT), PENTIUM III OR HIGHER PROCESSOR, 64 MB RAM, 100 MB FREE STORAGE SPACE, VIDEO ADAPTER & MONITOR (256 COLORS, 1024 x 768 DPI), KEYBOARD AND MOUSE.

LAW - Map Subscription (Yearly Fee)

LAW Yearly Map Subscription

This is a yearly map subscription for the LAW Server Software and Integrated Server Package that provides four automatic map updates per year. This fee is required on a yearly basis for continued operation of the server software and coverage starts upon initial configuration. REQUIRES LAW SERVER SOFTWARE OR INTEGRATED SERVER PACKAGE.
LAW - Seeker Expansion License (Additional 25 Devices)

LAW One-Time Device Expansion License Fee - 25 Units

Software Upgrade Option

This is a one-time hardware expansion license fee for 25 Seeker, Seeker D, Seeker MCA, Seeker MCA II, Seeker MCA III or Seeker BB-2 Units to connected to the LAW Server Software. REQUIRES LAW SERVER SOFTWARE OR INTEGRATED SERVER PACKAGE.
ADIA - Six Additional Clients

ADIA Client License - Six (6) Additional Clients

Client Software

Unit price for six (6) additional ADIA Client Software Installation Licenses. REQUIRES ADIA SERVER SOFTWARE OR INTEGRATED SERVER.
ACTS Server Software

ACTS Software

Network Testing Server Software

Server application enables a proprietary connection with the Original or New DSP Family of Field Analyzers for communication and testing Packet Loss, Latency, Jitter and MOS of VoIP services. Includes separate pass/fail results for forward and return path troubleshooting. In addition to the VoIP tests, this software enables high speed throughput tests with speeds up to 300 Mbps via modem, 90 mbps via RJ-45 (10/100) or 400 mbps via Electrical RJ-45 or Optical SFP Ethernet (10/100/1000), and can also be used as a ping test reflector.

AVM-3 Vehicle Antenna - Magnetic Mount (108 to 160 MHz)

Vertical quarter wave whip antenna with magnetic vehicle mount for low band (108 to 160 MHz) leakage detection. MUST SPECIFIY SINGLE FREQUENCY FROM 108 TO 160 MHZ. USE WITH THE SEEKER D REQUIRES 138 MHZ.

AFS-2 Dipole Antenna

AFS-2 Handheld Dipole Antenna - Long Pole (108 to 160 MHz)

Calibrated halfwave dipole with 50 Ohm impedance and long pole (3 meter) for low band (108 to 160 MHz) leakage detection. MUST SPECIFIY SINGLE FREQUENCY FROM 108 TO 160 MHZ. USE WITH THE SEEKER D REQUIRES 138 MHZ.

Near Field Probe (NFP-1)

NFP-1 Near Field Probe

Passive near field probe with 50 Ohm impedance for leakage detection in the near field at any leakage detection frequency.

APM-3 Antenna

APM-3 Vehicle Antenna - Permanent Mount (108 to 160 MHz)

Vertical quarter wave whip antenna with permanent vehicle mount for low band (108 to 160 MHz) leakage detection. MUST SPECIFIY SINGLE FREQUENCY FROM 108 TO 160 MHZ. USE WITH THE SEEKER D REQUIRES 138 MHZ.

RSVP² - 50 to 53.75 & 70 to 75.75 MHz

RSVP² Installer Return Path Tester (50 to 53.75 & 70 to 75.75 MHz)

Installers Reverse Path Tester

This is the 50 to 53.75 & 70 to 75.75 MHz Telemetry Installers Return Path Tester. The complete kit includes: RSPV² Field Unit, AC to DC power adapter & battery charger and RSVP² Padded Cloth Carrying Pouch (CC-15). REQUIRES CONFIGR PC SOFTWARE FOR CONFIGURATION. THIS UNIT IS NOT COMPATIBLE WITH THE 9581 SST R5.

RSVP² - 80 to 92 MHz

RSVP² Installer Return Path Tester (80 to 92 MHz)

Installers Reverse Path Tester

This is the 80 to 92 MHz Telemetry Installers Return Path Tester. The complete kit includes: RSPV² Field Unit, AC to DC power adapter & battery charger and RSVP² Padded Cloth Carrying Pouch (CC-15). REQUIRES CONFIGR PC SOFTWARE FOR CONFIGURATION. THIS UNIT IS NOT COMPATIBLE WITH THE 9581 SST R5.

Seeker Lite2

Seeker Lite²

Installation Leakage Detector

This is a frequency agile leakage detector (120 - 147.25 MHz) with ten user selectable presets. The instrument\'s features include Searcher Plus GT technology that is compatible with CT-2 or CT-3 channel tagging techniques, measurement range from 10 - 2000 uV/m, numeric readout, and tone proportional to signal strength. The complete kit includes the Seeker Lite² Leakage Detector, AC Travel Charger & Type-A USB to serial charge connector cable Cable. REQUIRES SEEKER SETUP PC SOFTWARE FOR CONFIGURATION.

860 DSPh - US

860 DSPh Rack Mounted Analyzer - US

Remote Headend Analyzer

Rack mounted (1U) unit for monitoring downstream analog and digital services. Monitored parameters include, Signal Level, Digital Power, C/N, HUM, Depth of Modulation, FM Deviation and MER & BER. Access measurement and channel status over the web with an Internet web browser or 860 DSPi. Each 860 DSPh monitors four ports as an integrated component of the Guardian System II or as a stand-alone monitoring system. The complete kit includes: 860 DSPh rack-mounted (2U) unit, 120/240 VAC Power Supply and AC US Power Cable. REQUIRES WORKBENCH LITE OR WORKBENCH PC SOFTWARE FOR CONFIGURATION. REQUIRES INTERROGATOR SERVER SOFTWARE FOR ANALYSIS.

860DSPh - Euro

860 DSPh Rack Mounted Analyzer - EURO

Remote Headend Analyzer

Rack mounted (1U) unit with a Euro Power Supply for monitoring downstream analog and digital services. Monitored parameters include, Signal Level, Digital Power, C/N, HUM, Depth of Modulation, FM Deviation and MER & BER. Access measurement and channel status over the web with an Internet web browser or 860 DSPi. Each 860 DSPh monitors four ports as an integrated component of the Guardian System II or as a stand-alone monitoring system. The complete kit includes: 860 DSPh rack-mounted (2U) unit, 120/240 VAC Power Supply, AC US Power Cable and AC Euro Power Cable. REQUIRES WORKBENCH LITE OR WORKBENCH PC SOFTWARE FOR CONFIGURATION. REQUIRES INTERROGATOR SERVER SOFTWARE FOR ANALYSIS.

860 DSPh Input Expander

860 DSPh Rack Mounted Analyzer - Input Expander

Rack mounted (2U) unit that increases the number of inputs monitored by a single 860 DSPh from four to sixteen. The complete kit includes: 860 DSPh Input Expander rack mounted (2U) unit, and interconnect & control cables. REQUIRES 860 DSPH RACK MOUNTED ANALYZER.

Seeker

Seeker Leakage Detector with Mobile Mount

GPS Compatible Leakage Detector

This is a frequency agile leakage detector (109.25 to 110.5 and 118.5 - 147.25 MHz) with ten user selectable presets. The instrument\'s features include Searcher Plus GT technology that is compatible with CT-2 or CT-3 channel tagging techniques, measurement range from 10 - 2000 uV/m, numeric readout, and tone proportional to signal strength. The complete kit includes the Seeker Leakage Detector, Rubber Duck Antenna, Mobile Mount (SMB-2), Mobile Mount DC Power Cable, AC Travel Charger & USB Cable and printed Quick Start Installation Checklist & Guide. REQUIRES SEEKER SETUP PC SOFTWARE FOR CONFIGURATION. REQUIRES SEEKER MCA UNIT & LAW SERVER SOFTWARE OR INTEGRATED SERVER FOR MAPPING & ANALYSIS.

TDM - Trilithic Data Management

TDM Integrated Server for the Original DSP Family

Integrated Server Package

The TDM Platform is a pre-configured server, integrating powerful software and hardware to provide a tailored, comprehensive network based solution for managing your deployment of 860 DSP and 860 DSPi field analyzers. The TDM platform is used to manage device configurations including; device interface settings, global device settings, measurement mode settings, network settings, channel plans, locations, limit sets, autotests, tasks and firmware updates, and measurement data. The TDM platform also includes extensive, easily customizable reporting tools and features that are compatible with most WFM systems. The complete kit includes the TDM Server Software pre-configured on a Dell PowerEdge R520 2U rack-mount server offering an excellent balance of processing power, storage capacity and redundancy. Specifications: Windows Server 2012R2 Standard Edition, Microsoft SQL Server Standard 2012 (5 User Cals), 2 Intel Xeon E5-2420 1.90 GHz Processors with 15M cache, 32 GB RAM (1600 MHz), 4 x 1 TB 7200 RPM SATA Hard Drives, 2 x 500 MB 7200 RPM Hard Drives, Dual Hot-Plug 750W Redundant Power Supply (1+1), 2 x US AC Power Cables and six (6) copies of the WorkBench with TDM Component Software on CD for installation on a client PC. THE TDM INTEGRATER SERVER ALLOWS A MAXIMUM OF 3000 DEVICE CONNECTIONS PER SERVER.

8821Q-R

8821Q-R

1 GHz Spectrum Analyzer

This is a portable 1 GHz 75 Ohm Spectrum Analyzer for CATV, QAM and Spectrum Analysis remotely operable via a LAN.

LAW - Leakage Analysis Workshop

LAW Integrated Server for the Seeker GPS System

Integrated Server Package

The LAW Platform is a pre-configured server, integrating powerful software and hardware to provide a tailored, comprehensive network based solution for managing your deployment of Seeker, Seeker D Seeker MCA, Seeker MCA II, Seeker MCA III or Seeker BB-2 units. The LAW Platform is used for the storage and retrieval of leakage information collected by vehicle mounted Seeker GPS systems via via the Internet through an application running on the technician's PC or laptop or through a configured Wi-Fi , Cellular, or Ethernet connection. The leakage data is then processed by the LAW platform and is displayed on a maps and as text. The LAW platform also includes extensive, easily customizable reporting tools and features that are compatible with most WFM systems. The complete kit includes the LAW Server Software pre-configured on a Dell PowerEdge R520 2U rack-mount server offering an excellent balance of processing power, storage capacity and redundancy. Specifications: Widows Server 2012R2 Standard Edition, Microsoft SQL Server Standard 2012 (5 User Cals), 2 Intel Xeon E5-2420 1.90 GHz Processors with 15M cache, 32 GB RAM (1600 MHz), 4 x 1 TB 7200 RPM SATA Hard Drives, 2 x 500 MB 7200 RPM Hard Drives, Dual Hot-Plug 750W Redundant Power Supply (1+1) and 2 x US AC Power Cables. THE LAW INTEGRATED SERVER SUPPORTS UP TO 250 DEVICES, EXPANDABLE TO 1000 DEVICES PER SERVER. EXPANSION LICENSES CAN BE PURCHASED IN BLOCKS OF 25 DEVICES. THE LAW YEARLY MAP SUBSCRIPTION IS REQUIRED WITH ALL NEW SALES OF THE LAW INTEGRATED SERVER PACKAGE AND MUST BE RENEWED YEARLY.

Seeker BB-2

Leakage Detector

This automatic leakage detection system is a fully automated, GPS-based leakage detection system that operates in the background while techs drive their routes.

Seeker Approved A/B/G/N Wi-Fi Access Point

This is a high-powered, long-range Dual Band Wireless N600 Outdoor Access Point with speeds up to 300Mbps on both its high-powered 2.4GHz and 5GHz radios. Encased in a rugged IP68-rated waterproof enclosure this versatile Outdoor Access Point can be configured in a number of modes and its dual band architecture enables network administrators to even select different operating modes per frequency band.

8310 RSA Return SpeedSweep Analyzer (65 MHz) with 120 to 240 VAC Power Supply

Return SpeedSweep Analyzer

Rack mounted (2U) 65 MHz unit with built-in 120/240 VAC power supply that receives a sweep initiated from a field test point by an 860 DSPi or 1G DSP field analyzer and transmits the received sweep level information back to the field analyzer on a downstream telemetry signal. The complete kit includes: 8310 RSA rack mounted (2U) 65 MHz unit with built-in 120/240 VAC power supply and AC power cable. INITIAL CONFIGURATION CAN BE PERFORMED FROM THE FRONT PANEL CONTROLS. FOR REMOTE CONFIGURATION & CONTROL A WEB BROWSER IS REQUIRED.

Searcher Family Mobile Mount (SMB-1)

Searcher Family Mobile Mount (SMB-1)

Mobile mount with vehicle power adapter for the Searcher Plus, Searcher Plus GT & Super Plus.

Tricorder Mobile Mount (MB-1)

Tricorder Mobile Mount (MB-1)

Mobile mount with vehicle power adapter for the Tricorder.
860 DSP & 860 DSPi Vehicle Power Adaptor (CL-5)

860 DSP & 860 DSPi Vehicle Power Adapter (CL-5)

Vehicle power adapter for the 860 DSP & 860 DSPi.

9581 SST & TPX Test Point Manager Replacement PCB Board (TPM-8)

9581 SST & TPX Test Point Manager Replacement PCB Board (TPM-8)

Factory Hardware Upgrade

This is Test Point Manager (TPM) PCB board that replaces a previously installed TPM-8. This only includes replacement PCB board, must reuse original mounting hardware and RF cables.

 

 

9581 SST R4 Test Point Manager (TPM-8)

9581 SST R4 Test Point Manager (TPM-8)

Factory Hardware Upgrade

The Test Point Manager (TPM) option equips SSTs or TPXs to monitor up to 8 Headend test points per TPM-8 installed.
9580 SSR PC Data Cable (I/O-4)

9580 SSR Data Cable (I/O-4)

RS-232 serial data cable for the 9580 SSR.
9580 SST PC Data Cable (I/O-5)

9580 SST Data Cable (I/O-5)

RS-232 serial data cable for the 9580 SST.
CM-8 Data Cable (I/O-8)

CM-8 to EI-1 Data Cable (I/O-8)

RS-232 serial data cable to connect the CM-8 to the EI-1.
EI-1 PC Data Cable (I/O-9)

EI-1 Data Cable (I/O-9)

RS-232 serial data cable to connect the EI-1 to a PC.
RSVP² Data Cable (I/O-6)

RSVP² Data Cable (I/O-6)

RS-232 serial data cable for the RSVP².
9580 SST Data Cable (I/O-3)

9580 SST to ACM-8 or NCM-4 Data Cable (I/O-3)

RS-232 serial data cable to connect the 9580 SST to the ACM-8 or NCM-4 for connecting additional 9580 SSTs.
9580 TPX Data Cable (I/O-7)

9580 TPX Data Cable (I/O-7)

RS-232 serial data cable to connect the 9580 TPX to the SSTi .
NCM-4 Data Cable (I/O-10)

NCM-4 Data Cable (I/O-10)

RS-232 serial data cable to connect the NCM-4 to a PC.
Search Lite Vehicle Power Adaptor (CL-3)

Search Lite Vehicle Power Adapter (CL-3)

Vehicle power adapter for the Search Lite.
Return Transmitter Board - Factory Upgrade

85 MHz Return Transmitter Board (RTB) for Original DSP Family

Factory Hardware Upgrade

This is a factory upgrade that includes installation of an 85 MHz Return Transmitter Board (RTB). When installed in an 860 DSPi, this option enables signal generation for the Return Sweep Receiver Option (SR-1), Return Tester RSVP Option (VP-1), and/or Frequency Domain Reflectometer Option (FDR). The complete factory upgrade package includes: all necessary hardware, software, and calibration (if needed) performed at Trilithic. REQUIRES POWER PACK OPTION.

For aftermarket purchases of this option, you must also purchase the SR-1, VP-1, and/or FDR Option. Requires hardware change at the factory. Call factory for RMA 800-344-2412.

Model One Vehicle Power Adaptor (CL-4)

Model One Vehicle Power Adapter (CL-4)

Vehicle power adapter for the Model One.
PC Data Cable for Model One, Model Two, and Model Two Lite (I/O-11)

Model One, Model Two & Model Two Lite Data Cable (I/O-11)

RS-232 serial data cable for the Model One, Model Two & Model Two Lite with DB-9 (male) to custom connector.
860 DSP & 860 DSPi PC Data Cable (I/O-14)

860 DSP & 860 DSPi Data Cable (I/O-14)

RS-232 serial data cable for the 860 DSP & DSPi with DB-9 (male) to 3.5 mm TRS mini jack.

Model Two & Model Two Lite Vehicle Power Adaptor (CL-6)

Model Two & Model Two Lite Vehicle Power Adapter (CL-6)

Vehicle power adapter for the Model Two & Model Two Lite.
Precision RF Coaxial Test Cable (I/O-15)

Precision RF Coaxial Test Cable (I/O-15)

Precision RF coaxial test cable (3 foot) with 75 Ohm impedance and F-Type Male to Male connectors.
Seeker Lite PC Data Cable (I/O-16)

Seeker Lite Data Cable (I/O-16)

RS-232 serial data cable for the Seeker Lite with Type-A USB plug to custom connector.
Seeker Lite² PC Data Cable (I/O-17)

Seeker Lite² Data Cable (I/O-17)

RS-232 serial data cable for the Seeker Lite² with Type-A USB plug to custom connector.

USB Charge/Data Cable for Seeker, Seeker MCA, and Seeker BB-2 (I/O-20)

Mini-USB Power/Data Cable (I/O-20)

Charge & data cable for the Seeker, Seeker SE, Seeker D, Seeker D Lite, 120 DSP, and 802 AWE with Type-A USB plug to Mini USB plug.

Seeker Mobile Mount & Seeker BB-2 Power Cable

Seeker & Seeker D Mobile Mount or Seeker BB-2 DC Power Cable

DC power cable for the Seeker Mobile Mount (SMB-2).

Seeker MCA & BB-2 Remote WiFi Antenna

Remote Wi-Fi Antenna for Seeker MCA I & MCA II (2.4 GHz)

Wi-Fi antenna (2.4 GHz) for Wi-Fi-equipped Seeker MCA, Seeker MCA II & Seeker BB-2 units. Includes 12 foot coaxial cable for remote mounting.

Rubber Duck Antenna (Low Band)

Rubber duck monopole antenna with 50 Ohm impedance for low band (108 to 160 MHz) leakage detection.

860 DSP & 860 DSPi Enhanced Digital Video (IL-2)

860 DSPi Enhanced Digital Video (IL-2) - Factory Upgrade

Factory Hardware Upgrade

This is a factory upgrade that includes a replacement of the Digital Video Board (IL-1) of the 860 DSP or 860 DSPi with an Enhanced Digital Video Board (IL-2). The Enhanced Digital Video Board (IL-2) adds deep interleave support to the Impulse BER function and extended measurements of errored seconds and code word errors in the QAM Option (QA-2). The complete factory upgrade package includes: all necessary hardware, software, and calibration (if needed) performed at Trilithic. REQUIRES POWER PACK OPTION. This option is required to enable the Vestigal Side Band Modulation Option (VSB). Recently shipped 860 DSPi’s already have the Enhanced Digital Video Board (IL-2). Requires hardware change at the factory. Call factory for RMA 800-344-2412.

GPS Receiver For Seeker MCA

Garmin GPS Receiver with RS-232 interface for the Seeker MCA. May be mounted with the included magnetic mount or bolted to a vehicle roof.

BNC-BNC Calibration Cable for 8821Q (I/O-18)

8821Q, 8821Q-R & 8831Q BNC Calibration Cable (I/O-18)

Precision RF coaxial calibration cable with 75 Ohm impedance and BNC to BNC male connectors for the 8821Q, 8821Q-R & 8831Q.
Null Modem Serial Data Cable for 8821Q (I/O-19)

8821Q, 8821Q-R & 8831Q DATA CABLE (I/O-19)

RS-232 serial data null-modem cable (3 foot) with DB-9 (male) connectors for the 8821Q, 8821Q & 8831Q.
8821Q-R USB Flash Drive

8821Q, 8821Q-R, 8831Q & 8853Q USB Flash Drive

Replacement USB storage device for the 8821Q, 8821Q-R, 8831Q & 8853Q.
Seeker Mobile Mount (SMB-2)

Seeker & Seeker SE Mobile Mount (SMB-2)

Mobile mount with mobile mount power cable for the Seeker & Seeker SE.

860 DSP & 860 DSPi Extended Frequency Range to 1 GHz

860 DSPi Extended Frequency Range to 1 GHz - Factory Upgrade

Factory Hardware Upgrade

This is a factory upgrade that includes a replacement of the RF Printed Circuit Board (PCB) of the 860 DSPi to extend the device measurement frequency range to 1 GHz. The complete factory upgrade package includes: all necessary hardware, software, and calibration (if needed) performed at Trilithic. Requires hardware change at the factory. Call factory for RMA 800-344-2412.

Seeker Pole Mounting Kit

Seeker Pole Mounting Kit

Mounting kit for attaching the Seeker Holster (CC-28) to the AFS-2 Handheld Dipole Antenna which enables one-handed use of the leakage detector and antenna.

860 DSP & 860 DSPi Ethernet Communications Interface (CI-5)

860 DSPi Ethernet Communication Interface (CI-5) - Factory Upgrade

Factory Hardware Upgrade

This is a factory upgrade that includes an upgrade of the Ethernet Communications Interface (CI-1, CI-2, CI-3, or CI-4) of the 860 DSP or 860 DSPi to an Ethernet Communications Interface (CI-5). The Ethernet Communications Interface (CI-5) adds 10/100 Ethernet connectivity and Wi-Fi compatibility to the 860 DSP or 860 DSPi allowing connection to the Internet through an external cable modem and enabling the High Speed Throughput Test feature. The complete factory upgrade package includes: all necessary hardware, software, and calibration (if needed) performed at Trilithic. Requires hardware change at the factory. Call factory for RMA 800-344-2412.

860 DSPi DOCSIS 3.0 Performance Package

860 DSPi DOCSIS 3.0 Performance Package - Factory Upgrade

Factory Hardware Upgrade

The DOCSIS 3.0 Performance Package is a factory upgrade for newer vintages of the 860 DSPi that already have the Enhanced Digital Video Option (IL-2) installed. This package includes a factory upgrade to a new DOCSIS 3.0 8x4 Modem, new input connectors, new instrument battery, new modem battery, new carrying case, device calibration, and a one year extended warranty. The complete factory upgrade package includes: all necessary hardware, software, and calibration (if needed) performed at Trilithic. Requires hardware change at the factory. Call factory for RMA 800-344-2412.

860 DSPi DOCSIS 3.0 Performance Package Field Upgrade

860 DSPi DOCSIS 3.0 Performance Package - Field Upgrade

Field Hardware Upgrade

The DOCSIS 3.0 Performance Package is a field upgrade for newer vintages of the 860 DSPi that already have the Enhanced Digital Video Option (IL-2) installed. This package includes an onsite upgrade to a new DOCSIS 3.0 8x4 Modem, new input connectors, new instrument battery, new modem battery, new carrying case, device calibration, and a one year extended warranty. Field upgrades are limited to the Contiguous United States and require a minimum of 25 units for Zone 1, 50 units for Zone 2, and 75 units for Zones 3 and 4.

860 DSPi DOCSIS 3.0 Performance Plus Package

860 DSPi DOCSIS 3.0 Performance Plus Package - Factory Upgrade

Factory Hardware Upgrade

The DOCSIS 3.0 Performance Plus Package is a factory upgrade for older vintages of the 860 DSPi that DO NOT have the Enhanced Digital Video Option (IL-2) installed. This package includes a factory upgrade to a new DOCSIS 3.0 8x4 Modem, Enhanced Digital Video Board (IL-2), new input connectors, new instrument battery, new modem battery, new carrying case, device calibration, and a one year extended warranty. The complete factory upgrade package includes: all necessary hardware, software, and calibration (if needed) performed at Trilithic. Requires hardware change at the factory. Call factory for RMA 800-344-2412.

860 DSPi DOCSIS 3.0 Performance Plus Package Field Upgrade

860 DSPi DOCSIS 3.0 Performance Plus Package - Field Upgrade

Field Hardware Upgrade

The DOCSIS 3.0 Performance Plus Package is a field upgrade for older vintages of the 860 DSPi that DO NOT have the Enhanced Digital Video Option (IL-2) installed. This package includes an onsite upgrade to a new DOCSIS 3.0 8x4 Modem, Enhanced Digital Video Board (IL-2), new input connectors, new instrument battery, new modem battery, new carrying case, device calibration, and a one year extended warranty. Field upgrades are limited to the Contiguous United States and require a minimum of 25 units for Zone 1, 50 units for Zone 2, and 75 units for Zones 3 and 4.

SFP 100 FX

SFP 100 FX Multi Mode Optical Transceiver - 1310 nm, 100 Mbps, LC Connector, 2 km

Optical Transceiver

1310 nm SFP multi-mode transceiver. For 100Mbps operation on GbE optical port. LC connector and 2 km reach.
SFP 100 LX

SFP 100 LX Single Mode Optical Transceiver - 1310 nm, 100 Mbps, LC Connector, 30 km

Optical Transceiver

1310 nm SFP single-mode transceiver. For 100Mbps operation on GbE optical port. LC connector and 30 km reach.
SFP 1000 LX

SFP 1000 SX Multi Mode Optical Transceiver - 850 nm, 1000 Mbps, LC Connector, 550 m

Optical Transceiver

850 nm SFP multi-mode transceiver for GbE LAN port. LC connector and 550 meter reach.

SFP 1000 SX

SFP 1000 LX Single Mode Optical Transceiver - 1310 nm, 1000 Mbps, LC Connector, 10 km

Optical Transceiver

1310 nm SFP single-mode transceiver for GbE LAN port. LC connector and 10 km reach.

SFP 1000 ZX

SFP 1000 ZX Single Mode Optical Transceiver - 1550 nm, 1000 Mbps, LC Connector, 80 km

Optical Transceiver

1550 nm SFP single-mode transceiver for GbE LAN port. LC connector and 80 km reach.
Multi-Mode Optical Patch Cable (5000-LC/MM)

Optical Patch Cable Multi Mode (LC/LC)

Six (6) foot multi-mode optical patch cable, full duplex with LC to LC connectors.
Single-Mode Optical Patch Cable (5000-LC/SM)

Optical Patch Cable Single Mode (LC/LC)

Six (6) foot single-mode optical patch cable, full duplex with LC to LC connectors.
CAT5e Ethernet Patch Cable (5000-RJ45)

CAT5e Ethernet Patch Cable - 6 Foot

CAT5e Ethernet patch cable (6 foot) with 100 Ohm impedance and RJ-45 Male to Male connectors.
9580 SSR Carrying Case (CC-10)

9580 SSR Carrying Case (CC-10)

Carrying case with detachable shoulder strap for the 9580 SSR.
RSVP² Padded Cloth Carrying Pouch (CC-15)

RSVP² Padded Cloth Carrying Pouch (CC-15)

Padded cloth carrying pouch with belt loop for the RSVP².
860 DSPi Cloth Carrying Case With Strap (CC-24)

860 DSPi Cloth Carrying Case with Strap (CC-24)

Cloth carrying case with strap for the 860 DSPi

Model Two & Model Three Protective Carrying Case (CC-20)

Model Two, Model Three & M3 Plus Protective Carrying Case (CC-20)

Protective carrying case with foam insert for the Model Two, Model Two Lite, Model Three & M3 Plus.
Seeker Lite & Seeker Lite² Carrying Case with Holster (CC-22)

Seeker Lite & Seeker Lite² Carrying Case with Holster (CC-22)

Carrying case with holster for the Seeker Lite & Seeker Lite².

860 DSPi & Seeker, Seeker Lite or Seeker Lite² Carrying Case (CC-23)

860 DSPi & Seeker, Seeker Lite, or Seeker Lite² Carrying Case (CC-23)

Carrying case designed to house an 860 DSPi, leakage detector, power adapter/charger, test cables, probes and more. Includes Precision RF Coaxial Test Cable (I/O-15).
Seeker Holster (CC-28)

Seeker Holster (CC-28)

Holster used to protect the Seeker when used out of the Seeker Mobile Mount (SMB-2) that can also be used with the AFS-2 Dipole Antenna that is equipped with a Seeker Pole Mounting Kit.

Model Two & Model Three Rubber Protective Bumper (CC-25)

Model Two, Model Three & M3 Plus Rubber Protective Bumper (CC-25)

Orange rubber protective bumper for the Model One, Model Two, Model Two Lite & Model Three.
8821Q, 8821Q-R & 8853Q Carrying Case on Wheels (CC-29)

8821Q, 8821Q-R, 8831Q & 8853Q Carrying Case on Wheels (CC-29)

Carrying case on wheels for the 8821Q, 8821Q-R, 8831Q and 8853Q.
860 DSP & 860 DSPi Protective Display Shields

860 DSP & 860 DSPi Protective Display Shields

Set of five (5) clear plastic adhesive shields used to protect the display of the 860 DSP & 860 DSPi.

LAW SaaS Setup (One-Time Fee)

LAW SaaS Setup (One-Time Fee)

This is a one-time set up fee for LAW Hosted Services. This does not include the LAW Map License or Monthly Subscription.
LAW SaaS Subscription (Monthly Fee)

LAW SaaS Subscription (Yearly Fee)

Offered as an alternative to installing and maintaining expensive server equipment and relying on IT personnel focused on other tasks, Trilithic\'s Network Services group hosts all of the required hardware, software, security and support, allowing you to build and operate a high-quality broadband network at a lower total cost. QUANTITY DISCOUNTING AVAILABLE for monthly rates based on the number of Seekers in your system, see discount schedule below. For new purchases, you must include LAW Hosted Services Setup & LAW Map License.

Enhanced Digital Video (IL-2) Field Upgrade

860 DSPi Enhanced Digital Video (IL-2) - Field Upgrade

Field Hardware Upgrade

This is a field upgrade that includes a replacement of the Digital Video Board (IL-1) of the 860 DSP or 860 DSPi with an Enhanced Digital Video Board (IL-2). The Enhanced Digital Video Board (IL-2) adds deep interleave support to the Impulse BER function and extended measurements of errored seconds and code word errors in the QAM Option (QA-2). The complete field upgrade package includes: all necessary hardware and software. REQUIRES POWER PACK OPTION. This option is required to enable the Vestigal Side Band Modulation Option (VSB). Recently shipped 860 DSPi’s already have the Enhanced Digital Video Board (IL-2). Field upgrades are limited to the Contiguous United States and require a minimum of 25 units for Zone 1, 50 units for Zone 2, and 75 units for Zones 3 and 4.

 

860 DSP & 860 DSPi Extended Frequency Range to 1 GHz Field Upgrade

860 DSPi Extended Frequency Range to 1 GHz - Field Upgrade

Field Hardware Upgrade

This is a field upgrade that includes an onsite replacement of the RF Printed Circuit Board (PCB) of the 860 DSPi to extend the device measurement frequency range to 1 GHz. The complete field upgrade package includes: all necessary hardware, software, and calibration (if needed) performed onsite. Field upgrades are limited to the Contiguous United States and require a minimum of 25 units for Zone 1, 50 units for Zone 2, and 75 units for Zones 3 and 4.
860 DSP & 860 DSPi Ethernet Communications Interface (CI-5) Field Upgrade

860 DSPi Ethernet Communication Interface (CI-5) - Field Upgrade

Field Hardware Upgrade

This is a field upgrade that includes an onsite upgrade of the Ethernet Communications Interface (CI-1, CI-2, CI-3, or CI-4) of the 860 DSP or 860 DSPi to an Ethernet Communications Interface (CI-5). The Ethernet Communications Interface (CI-5) adds 10/100 Ethernet connectivity and Wi-Fi compatibility to the 860 DSP or 860 DSPi allowing connection to the Internet through an external cable modem and enabling the High Speed Throughput Test feature. The complete field upgrade package includes: all necessary hardware, software, and calibration (if needed) performed onsite. Field upgrades are limited to the Contiguous United States and require a minimum of 25 units for Zone 1, 50 units for Zone 2, and 75 units for Zones 3 and 4.

860 DSPi

860 DSPi

Portable Analyzer

Portable cable analyzer and CATV meter with a built-in DOCSIS 3.0 modem for performing transmission and signal quality tests for analog and digital HSD and VoIP services.

Seeker GPS with MCA II

Seeker & MCA III

Analog Leakage Management System

Seeker with MCA III is a GPS-based leakage management and CATV leak detection system for documentation and troubleshooting.

SpeedSweep System

SpeedSweep System

The SpeedSweep system gives techs the ability to test forward and reverse RF sweep response.

860 DSPh

860 DSPh

Remote Headend Analyzer

The new Trilithic 860 DSPh is the ideal instrument for managing signal quality in remote headends.

9581 SST

9581 SST

Return Path Analyzer

The 9581 SST Return Path Analyzer is the only DSP-based return path analyzer in the industry.

RSVP²

RSVP²

Reverse Path Tester

RSVP² for reverse path testing is designed specifically with the CATV installer in mind. 

Guardian II

Guardian System II

Return Path Monitoring

Guardian System II is an integrated system of hardware and software that supports all return path maintenance activities.

LAW

LAW

Leakage Analysis Workshop

LAW, coupled with Seeker GPS, provide a leakage management system that enables operators to find and fix leaks quickly.

WorkBench

WorkBench

Software

Software for the 860 DSP, 860 DSPi, 860 DSPh, and 860 DSPr analyzers and 8300 FST Forward SpeedSweep Transmitter.

8821Q-R Spectrum Analyzer

8821Q-R

Spectrum Analyzer

8821Q-R Spectrum Analyzer enables cable system operators to put sophisticated analysis and troubleshooting capabilities in the hands of a wider range of technicians.

Upstream Equalization (UPEQ)

Upstream Linear Distortions Option (UP-LD) for Original DSP Family

When installed in an 860 DSPi, Upstream Linear Distortion analysis takes the EQ taps from the cable modem and displays their values. It also calculates and displays a response and delay graph. Currently this mode works on DOCSIS 2.0 and DOCSIS 3.0 8x4 equipped 860 DSPi units. REQUIRES POWER PACK OPTION.
Rotary Attenuators

RSA Series

Rotary Step Attenuators

Trilithic\'s RSA series of rotary step attenuators are recognized worldwide as the standard for durable, precise signal level control.

Tunable Filters

VF Series

Tunable Filters

Trilithic\'s tunable filters are ideally suited for precision test and measurement environments.

Programmable RF Switches

7000 Series

Programmable RF Switches

The 7000 series of programmable RF switches can be mounted near signal sources to be switched and operated via \'twisted pair\' wiring from the INTERLINK card frame.

Impedance Matching Pads

ZM Series

Impedance Matching Pads

Trilithic\'s ZM series of minimum loss, coaxial pads are resistive \'L\' pads which provide the minimum loss possible for resistive matching between different impedances.

9581 SST

9581 SST R4 Return Path Analyzer (Euro - 65 MHz) with 120 to 240 VAC Power Supply

Rack mounted (2U) 65 MHz unit with International Data Frequencies (80.5-92 MHz or 104-115 MHz), Two TPM-8 Options & ECM + SNMP Communication Interface and built-in 120/240 VAC power supply. The 9581 SST R4 is optimized for status monitoring in medium to high density node applications and spectrum analysis of the return path up to 65 MHz via the ViewPoint Server with Return Path Management (RPM) Module. The 9581 SST R4 provides the combination of resolution, detector mode and an embedded SNMP agent option while simultaneously supporting return sweep, ingress troubleshooting and continuity testing applications. TraffiControl is included in this release. The complete kit includes: 9581 SST R4 rack mounted (2U) 65 MHz unit with International Data Frequencies, built-in 120/240 VAC power supply and AC power cable. REQUIRES SST CONFIGURE PC SOFTWARE FOR CONFIGURATION. REQUIRES VIEWPOINT SERVER SOFTWARE OR INTEGRATED SERVER WITH RPM MODULE FOR ANALYSIS. ANALYSIS CAN BE ALSO BE PERFORMED WITH LEGACY VIEWER II SERVER SOFTWARE OR INTEGRATED SERVER.
9581 SST

9581 SST R4 Return Path Analyzer (US - 65 MHz) with 120 to 240 VAC Power Supply

Rack mounted (2U) 65 MHz unit with US Data Frequencies (50.00-53.75 MHz or 70.00-75.75 MHz), Two TPM-8 Options & ECM + SNMP Communication Interface and built-in 120/240 VAC power supply. The 9581 SST R4 is optimized for status monitoring in medium to high density node applications and spectrum analysis of the return path up to 65 MHz via the ViewPoint Server with Return Path Management (RPM) Module. The 9581 SST R4 provides the combination of resolution, detector mode and an embedded SNMP agent option while simultaneously supporting return sweep, ingress troubleshooting and continuity testing applications. TraffiControl is included in this release. The complete kit includes: 9581 SST R4 rack mounted (2U) 65 MHz unit with International Data Frequencies, built-in 120/240 VAC power supply and AC power cable. REQUIRES SST CONFIGURE PC SOFTWARE FOR CONFIGURATION. REQUIRES VIEWPOINT SERVER SOFTWARE OR INTEGRATED SERVER WITH RPM MODULE FOR ANALYSIS. ANALYSIS CAN BE ALSO BE PERFORMED WITH LEGACY VIEWER II SERVER SOFTWARE OR INTEGRATED SERVER.

Model Three & M3 Plus Data Cable

RS-232 serial data cable for the Model Three & M3 Plus with Type-A USB plug to custom connector.
Model Three Battery

Model Three Battery

Li-ION battery for the Model Three Signal Level Meter.

Seeker MCA I to Wireless Matrix or SageQuest Data Cable

Data Cable

RS-232 serial data cable (10 foot) with DB-9 (male) connector to 7 Pin connector for connecting the Seeker MCA to a third party GPS (Wireless Matrix, SageQuest, etc) system.
860 DSPi DOCSIS 3.0 Modem

860 DSPi DOCSIS 3.0 (8x4) Modem (US DOCSIS) - Factory Upgrade

Factory Hardware Upgrade

This is a factory upgrade that includes a replacement of an existing DOCSIS 3.0 (4x4) Modem in the 860 DSPi with a DOCSIS 3.0 (8x4) Modem. The complete factory upgrade package includes: all necessary hardware, software, and calibration (if needed) performed at Trilithic. Requires hardware change at the factory. Call factory for RMA 800-344-2412.

860 DSPi DOCSIS 3.0 Modem Field Upgrade

860 DSPi DOCSIS 3.0 (8x4) Modem (US DOCSIS) - Field Upgrade

Field Hardware Upgrade

This is a field upgrade that includes an onsite replacement of an existing DOCSIS 3.0 (4x4) Modem in the 860 DSPi with a DOCSIS 3.0 (8x4) Modem. The complete field upgrade package includes: all necessary hardware, software, and calibration (if needed) performed onsite. Field upgrades are limited to the Contiguous United States and require a minimum of 25 units for Zone 1, 50 units for Zone 2, and 75 units for Zones 3 and 4.

Seeker SE Leakage Detector with Mobile Mount (Not Compatible with Seeker MCA Units)

Stand-Alone Leakage Detector

This is a frequency agile leakage detector (120 - 147.25 MHz) with ten user selectable presets. The instrument\'s features include Searcher Plus GT technology that is compatible with CT-2 or CT-3 channel tagging techniques, measurement range from 10 - 2000 uV/m, numeric readout, and tone proportional to signal strength. The complete kit includes the Seeker SE Leakage Detector, Rubber Duck Antenna, Mobile Mount (SMB-2), Mobile Mount DC Power Cable, AC Travel Charger & USB Cable and printed Quick Start Installation Checklist & Guide. THIS UNIT IS NOT COMPATIBLE WITH SEEKER MCA UNITS. REQUIRES SEEKER SETUP PC SOFTWARE FOR CONFIGURATION.

6 dB Optical Attenuator (LC/UPC)

6 dB Optical Attenuator (LC/UPC)

6 dB Optical Attenuator with LC/UPC connectors. For use with SFP and XFP Optical Transceivers.
Return Transmitter Board Field Upgrade

860 DSPi 85 MHz Return Transmitter Board (RTB) - Field Upgrade

Field Hardware Upgrade

This is a field upgrade that includes an onsite installation of an 85 MHz Return Transmitter Board (RTB) for the 860 DSP or 860 DSPi. The Return Transmitter Board (RTB) enables signal generation for the Return Sweep Recevier Option (SR-1), Return Tester RSVP Option (VP-1), and/or Frequency Domain Reflectometer Option (FDR). The complete field upgrade package includes: all necessary hardware, software, and calibration (if needed) performed onsite. REQUIRES POWER PACK OPTION.

For aftermarket purchases of this option, you must also purchase the SR-1, VP-1, and/or FDR Option. Field upgrades are limited to the Contiguous United States and require a minimum of 25 units for Zone 1, 50 units for Zone 2, and 75 units for Zones 3 and 4.

AFS-4 Handheld Dipole Antenna - Short Pole (108 to 160 MHz)

AFS-4 Handheld Dipole Antenna - Short Pole (108 to 160 MHz)

Calibrated halfwave dipole with 50 Ohm impedance and short pole (18 inch) for low band (108 to 160 MHz) leakage detection. MUST SPECIFIY SINGLE FREQUENCY FROM 108 TO 160 MHZ. USE WITH THE SEEKER D REQUIRES 138 MHZ.

GPS Receiver For Seeker MCA II & MCA III

Garmin GPS Receiver with RS-232 (DB-9) interface for the Seeker MCA II. May be mounted with the included magnetic mount or bolted to a vehicle roof.

Seeker MCA & BB-2 Remote WiFi Antenna

Seeker MCA II Cellular Antenna (850/1900 MHz)

Cellular antenna (850/1900 MHZ) for cellular equipped Seeker MCA II units. Includes 12 foot coaxial cable for remote mounting.
Seeker MCA & BB-2 Remote WiFi Antenna

Seeker MCA II Cellular Antenna (900/1800 MHz)

Cellular antenna (900/1800 MHZ) for cellular equipped Seeker MCA II units. Includes 12 foot coaxial cable for remote mounting.
CAT5e Ethernet Patch Cable (5000-RJ45)

CAT5e Ethernet Patch Cable - 10 Foot (Quad-Shielded)

CAT5e Ethernet patch cable (10 foot) quad-shielded with 100 Ohm impedance and RJ-45 Male to Male connectors.
9581 SST Release 3 to Release 4 Factory Upgrade

9581 SST R3 to 9581 SST R4 - Factory Upgrade

Factory Upgrade

This is a factory upgrade that upgrades a 9581 SST R3 to a 9581 SST R4. The factory upgrade package includes: necessary hardware, software, and calibration (if needed) performed at Trilithic. Requires hardware change at the factory (DOES NOT INCLUDE TRANSMITTER BOARD REPLACEMENT OR TELEMETRY FREQUENCY CHANGES). Call factory for RMA 800-344-2412.

9581 SST

9581 SST R5 Return Path Analyzer (85 MHz) with 120 to 240 VAC Power Supply

Return Path Analyzer - 85 MHz

Rack mounted (2U) 85 MHz unit with built-in 120/240 VAC power supply that is optimized for status monitoring in medium to high density node applications and spectrum analysis of the return path up to 85 MHz via the ViewPoint Server with Return Path Management (RPM) Module. The 9581 SST R5 provides the combination of resolution, detector mode and an embedded SNMP agent option while simultaneously supporting return sweep, ingress troubleshooting and continuity testing applications. TraffiControl is included in this release. The complete kit includes: 9581 SST R5 rack mounted (2U) 85 MHz unit with built-in 120/240 VAC power supply and AC power cable. REQUIRES SST CONFIGURE PC SOFTWARE FOR CONFIGURATION. REQUIRES VIEWPOINT SERVER SOFTWARE OR INTEGRATED SERVER WITH RPM MODULE FOR ANALYSIS. ANALYSIS CAN BE ALSO BE PERFORMED WITH LEGACY VIEWER II SERVER SOFTWARE OR INTEGRATED SERVER. THIS UNIT IS NOT COMPATIBLE WITH THE RSVP² FIELD UNIT.

DOCSIS 3.0 (8x4) Modem

DOCSIS 3.0 (8x4) Modem

Placeholder part used in configuration of the 860 DSPi.

860 DSPi Field Analyzer

860 DSPi - US

Multi-Function Interactive Cable Analyzer

The 860 DSPi is a handheld spectrum analyzer with US DOCSIS 3.0 (8x4) modem that provides all of the testing power needed to ensure HFC networks operate to high standards. This includes balancing of the distribution system, maintaining analog and digital signal quality and controlling return path ingress. Standard Testing Features: 6 MHz Channel Spacing, Return Spectrum Analysis (4 to 65 MHz), Forward Spectrum Analysis (4 to 1000 MHz), Level Measurement, C/N Measurement, QAM Measurement (Level/MER/BER), Channel Plan Scan with Tilt Measurement, Ping, Trace Route, VoIP, Throughput, Cable Modem Statistics, Analog HUM, Depth of Modulation, CSO/CTB, FM Deviation, Sweepless Sweep, Line Viewer and QAM Source. Standard Communication Features: RF Test Port (F-Type, Replaceable), US DOCSIS 3.0 Modem 8x4 (100/304 MBPS), RJ45 Electrical Ethernet Port (10/100MBPS), CM to RJ-45 Mode. The complete kit includes the 860 DSPi Meter, Protective Carrying Case, Shoulder Strap, US AC Power Cable and AC to DC Power Adapter & Battery Charger.

860 DSPi with Euro DOCSIS 3.0 Modem

860 DSPi - EURO

Multi-Function Interactive Cable Analyzer

The 860 DSPi is a handheld spectrum analyzer with EURO DOCSIS 3.0 (8x4) modem that provides all of the testing power needed to ensure HFC networks operate to high standards. This includes balancing of the distribution system, maintaining analog and digital signal quality and controlling return path ingress. Standard Testing Features: 8 MHz Channel Spacing, Return Spectrum Analysis (4 to 65 MHz), Forward Spectrum Analysis (4 to 1000 MHz), Level Measurement, C/N Measurement, QAM Measurement (Level/MER/BER), Channel Plan Scan with Tilt Measurement, Ping, Trace Route, VoIP, Throughput, Cable Modem Statistics, Analog HUM, Depth of Modulation, CSO/CTB, FM Deviation, Sweepless Sweep, Line Viewer and QAM Source. Standard Communication Features: RF Test Port (F-Type, Replaceable), EURO DOCSIS 3.0 Modem 8x4 (100/304 MBPS), RJ45 Electrical Ethernet Port (10/100MBPS), CM to RJ-45 Mode. The complete kit includes: 860 DSPi Meter, Protective Carrying Case, Shoulder Strap, EURO AC Power Cable and AC to DC Power Adapter & Battery Charger.
860 DSPi Field Analyzer

860 DSPi - US (RTB)

Configured with options

The 860 DSPi is a handheld spectrum analyzer with US DOCSIS 3.0 (8x4) modem that provides all of the testing power needed to ensure HFC networks operate to high standards. This includes balancing of the distribution system, maintaining analog and digital signal quality and controlling return path ingress. Standard Testing Features: 6 MHz Channel Spacing, Return Spectrum Analysis (4 to 65 MHz), Forward Spectrum Analysis (4 to 1000 MHz), Level Measurement, C/N Measurement, QAM Measurement (Level/MER/BER), Channel Plan Scan with Tilt Measurement, Ping, Trace Route, VoIP, Throughput, Cable Modem Statistics, Analog HUM, Depth of Modulation, CSO/CTB, FM Deviation, Sweepless Sweep, Line Viewer and QAM Source. Standard Communication Features: RF Test Port (F-Type, Replaceable), US DOCSIS 3.0 Modem 8x4 (100/304 MBPS), RJ45 Electrical Ethernet Port (10/100MBPS), CM to RJ-45 Mode. The complete kit includes: 860 DSPi Meter, Protective Carrying Case, Shoulder Strap, US AC Power Cable and AC to DC Power Adapter & Battery Charger. Configured with: Return Transmitter Board (RTB) Option
860 DSPi Field Analyzer

860 DSPi - US (PP-1)

Configured with options

The 860 DSPi is a handheld spectrum analyzer with US DOCSIS 3.0 (8x4) modem that provides all of the testing power needed to ensure HFC networks operate to high standards. This includes balancing of the distribution system, maintaining analog and digital signal quality and controlling return path ingress. Standard Testing Features: 6 MHz Channel Spacing, Return Spectrum Analysis (4 to 65 MHz), Forward Spectrum Analysis (4 to 1000 MHz), Level Measurement, C/N Measurement, QAM Measurement (Level/MER/BER), Channel Plan Scan with Tilt Measurement, Ping, Trace Route, VoIP, Throughput, Cable Modem Statistics, Analog HUM, Depth of Modulation, CSO/CTB, FM Deviation, Sweepless Sweep, Line Viewer and QAM Source. Standard Communication Features: RF Test Port (F-Type, Replaceable), US DOCSIS 3.0 Modem 8x4 (100/304 MBPS), RJ45 Electrical Ethernet Port (10/100MBPS), CM to RJ-45 Mode. The complete kit includes: 860 DSPi Meter, Protective Carrying Case, Shoulder Strap, US AC Power Cable and AC to DC Power Adapter & Battery Charger. Configured with: Power Pack (PP-1) Option
860 DSPi Field Analyzer

860 DSPi - US (PP-1, SR-1 & RTB)

Configured with options

The 860 DSPi is a handheld spectrum analyzer with US DOCSIS 3.0 (8x4) modem that provides all of the testing power needed to ensure HFC networks operate to high standards. This includes balancing of the distribution system, maintaining analog and digital signal quality and controlling return path ingress. Standard Testing Features: 6 MHz Channel Spacing, Return Spectrum Analysis (4 to 65 MHz), Forward Spectrum Analysis (4 to 1000 MHz), Level Measurement, C/N Measurement, QAM Measurement (Level/MER/BER), Channel Plan Scan with Tilt Measurement, Ping, Trace Route, VoIP, Throughput, Cable Modem Statistics, Analog HUM, Depth of Modulation, CSO/CTB, FM Deviation, Sweepless Sweep, Line Viewer and QAM Source. Standard Communication Features: RF Test Port (F-Type, Replaceable), US DOCSIS 3.0 Modem 8x4 (100/304 MBPS), RJ45 Electrical Ethernet Port (10/100MBPS), CM to RJ-45 Mode. The complete kit includes: 860 DSPi Meter, Protective Carrying Case, Shoulder Strap, US AC Power Cable and AC to DC Power Adapter & Battery Charger. Configured with: Power Pack (PP-1), Return Sweep Receiver (SR-1) and Return Transmitter Board (RTB) Options
860 DSPi Field Analyzer

860 DSPi - US (PP-1, VP-1 & RTB)

Configured with options

The 860 DSPi is a handheld spectrum analyzer with US DOCSIS 3.0 (8x4) modem that provides all of the testing power needed to ensure HFC networks operate to high standards. This includes balancing of the distribution system, maintaining analog and digital signal quality and controlling return path ingress. Standard Testing Features: 6 MHz Channel Spacing, Return Spectrum Analysis (4 to 65 MHz), Forward Spectrum Analysis (4 to 1000 MHz), Level Measurement, C/N Measurement, QAM Measurement (Level/MER/BER), Channel Plan Scan with Tilt Measurement, Ping, Trace Route, VoIP, Throughput, Cable Modem Statistics, Analog HUM, Depth of Modulation, CSO/CTB, FM Deviation, Sweepless Sweep, Line Viewer and QAM Source. Standard Communication Features: RF Test Port (F-Type, Replaceable), US DOCSIS 3.0 Modem 8x4 (100/304 MBPS), RJ45 Electrical Ethernet Port (10/100MBPS), CM to RJ-45 Mode. The complete kit includes: 860 DSPi Meter, Protective Carrying Case, Shoulder Strap, US AC Power Cable and AC to DC Power Adapter & Battery Charger. Configured with: Power Pack (PP-1), Return Tester RSVP (VP-1) and Return Transmitter Board (RTB) Options
860 DSPi Field Analyzer

860 DSPi - US (PP-1, SR-1, VP-1 & RTB)

Configured with options

The 860 DSPi is a handheld spectrum analyzer with US DOCSIS 3.0 (8x4) modem that provides all of the testing power needed to ensure HFC networks operate to high standards. This includes balancing of the distribution system, maintaining analog and digital signal quality and controlling return path ingress. Standard Testing Features: 6 MHz Channel Spacing, Return Spectrum Analysis (4 to 65 MHz), Forward Spectrum Analysis (4 to 1000 MHz), Level Measurement, C/N Measurement, QAM Measurement (Level/MER/BER), Channel Plan Scan with Tilt Measurement, Ping, Trace Route, VoIP, Throughput, Cable Modem Statistics, Analog HUM, Depth of Modulation, CSO/CTB, FM Deviation, Sweepless Sweep, Line Viewer and QAM Source. Standard Communication Features: RF Test Port (F-Type, Replaceable), US DOCSIS 3.0 Modem 8x4 (100/304 MBPS), RJ45 Electrical Ethernet Port (10/100MBPS), CM to RJ-45 Mode. The complete kit includes: 860 DSPi Meter, Protective Carrying Case, Shoulder Strap, US AC Power Cable and AC to DC Power Adapter & Battery Charger. Configured with: Power Pack (PP-1), Return Sweep Receiver (SR-1), Return Tester RSVP (VP-1) and Return Transmitter Board (RTB) Options
860 DSPi Field Analyzer

860 DSPi - US (PP-1 & SA-1)

Configured with options

The 860 DSPi is a handheld spectrum analyzer with US DOCSIS 3.0 (8x4) modem that provides all of the testing power needed to ensure HFC networks operate to high standards. This includes balancing of the distribution system, maintaining analog and digital signal quality and controlling return path ingress. Standard Testing Features: 6 MHz Channel Spacing, Return Spectrum Analysis (4 to 65 MHz), Forward Spectrum Analysis (4 to 1000 MHz), Level Measurement, C/N Measurement, QAM Measurement (Level/MER/BER), Channel Plan Scan with Tilt Measurement, Ping, Trace Route, VoIP, Throughput, Cable Modem Statistics, Analog HUM, Depth of Modulation, CSO/CTB, FM Deviation, Sweepless Sweep, Line Viewer and QAM Source. Standard Communication Features: RF Test Port (F-Type, Replaceable), US DOCSIS 3.0 Modem 8x4 (100/304 MBPS), RJ45 Electrical Ethernet Port (10/100MBPS), CM to RJ-45 Mode. The complete kit includes: 860 DSPi Meter, Protective Carrying Case, Shoulder Strap, US AC Power Cable and AC to DC Power Adapter & Battery Charger. Configured with: Power Pack (PP-1) and Spectrum Analyzer (SA-1) Options
860 DSPi Field Analyzer

860 DSPi - US (PP-1, SR-1, SA-1 & RTB)

Configured with options

The 860 DSPi is a handheld spectrum analyzer with US DOCSIS 3.0 (8x4) modem that provides all of the testing power needed to ensure HFC networks operate to high standards. This includes balancing of the distribution system, maintaining analog and digital signal quality and controlling return path ingress. Standard Testing Features: 6 MHz Channel Spacing, Return Spectrum Analysis (4 to 65 MHz), Forward Spectrum Analysis (4 to 1000 MHz), Level Measurement, C/N Measurement, QAM Measurement (Level/MER/BER), Channel Plan Scan with Tilt Measurement, Ping, Trace Route, VoIP, Throughput, Cable Modem Statistics, Analog HUM, Depth of Modulation, CSO/CTB, FM Deviation, Sweepless Sweep, Line Viewer and QAM Source. Standard Communication Features: RF Test Port (F-Type, Replaceable), US DOCSIS 3.0 Modem 8x4 (100/304 MBPS), RJ45 Electrical Ethernet Port (10/100MBPS), CM to RJ-45 Mode. The complete kit includes: 860 DSPi Meter, Protective Carrying Case, Shoulder Strap, US AC Power Cable and AC to DC Power Adapter & Battery Charger. Configured with: Power Pack (PP-1), Return Tester RSVP (VP-1), Spectrum Analyzer (SA-1) and Return Transmitter Board (RTB) Options
860 DSPi Field Analyzer

860 DSPi - US (PP-1, VP-1, SA-1 & RTB)

Configured with options

The 860 DSPi is a handheld spectrum analyzer with US DOCSIS 3.0 (8x4) modem that provides all of the testing power needed to ensure HFC networks operate to high standards. This includes balancing of the distribution system, maintaining analog and digital signal quality and controlling return path ingress. Standard Testing Features: 6 MHz Channel Spacing, Return Spectrum Analysis (4 to 65 MHz), Forward Spectrum Analysis (4 to 1000 MHz), Level Measurement, C/N Measurement, QAM Measurement (Level/MER/BER), Channel Plan Scan with Tilt Measurement, Ping, Trace Route, VoIP, Throughput, Cable Modem Statistics, Analog HUM, Depth of Modulation, CSO/CTB, FM Deviation, Sweepless Sweep, Line Viewer and QAM Source. Standard Communication Features: RF Test Port (F-Type, Replaceable), US DOCSIS 3.0 Modem 8x4 (100/304 MBPS), RJ45 Electrical Ethernet Port (10/100MBPS), CM to RJ-45 Mode. The complete kit includes: 860 DSPi Meter, Protective Carrying Case, Shoulder Strap, US AC Power Cable and AC to DC Power Adapter & Battery Charger. Configured with: Power Pack (PP-1), Return Sweep Receiver (SR-1), Return Tester RSVP (VP-1), Spectrum Analyzer (SA-1) and Return Transmitter Board (RTB) Options
860 DSPi Field Analyzer

860 DSPi - US (PP-1, SR-1, VP-1, SA-1 & RTB)

Configured with options

The 860 DSPi is a handheld spectrum analyzer with US DOCSIS 3.0 (8x4) modem that provides all of the testing power needed to ensure HFC networks operate to high standards. This includes balancing of the distribution system, maintaining analog and digital signal quality and controlling return path ingress. Standard Testing Features: 6 MHz Channel Spacing, Return Spectrum Analysis (4 to 65 MHz), Forward Spectrum Analysis (4 to 1000 MHz), Level Measurement, C/N Measurement, QAM Measurement (Level/MER/BER), Channel Plan Scan with Tilt Measurement, Ping, Trace Route, VoIP, Throughput, Cable Modem Statistics, Analog HUM, Depth of Modulation, CSO/CTB, FM Deviation, Sweepless Sweep, Line Viewer and QAM Source. Standard Communication Features: RF Test Port (F-Type, Replaceable), US DOCSIS 3.0 Modem 8x4 (100/304 MBPS), RJ45 Electrical Ethernet Port (10/100MBPS), CM to RJ-45 Mode. The complete kit includes: 860 DSPi Meter, Protective Carrying Case, Shoulder Strap, US AC Power Cable and AC to DC Power Adapter & Battery Charger. Configured with: Power Pack (PP-1), QAM (QA-2) and Return Transmitter Board (RTB) Options
860 DSPi Field Analyzer

860 DSPi - US (PP-1 & QA-2)

Configured with options

The 860 DSPi is a handheld spectrum analyzer with US DOCSIS 3.0 (8x4) modem that provides all of the testing power needed to ensure HFC networks operate to high standards. This includes balancing of the distribution system, maintaining analog and digital signal quality and controlling return path ingress. Standard Testing Features: 6 MHz Channel Spacing, Return Spectrum Analysis (4 to 65 MHz), Forward Spectrum Analysis (4 to 1000 MHz), Level Measurement, C/N Measurement, QAM Measurement (Level/MER/BER), Channel Plan Scan with Tilt Measurement, Ping, Trace Route, VoIP, Throughput, Cable Modem Statistics, Analog HUM, Depth of Modulation, CSO/CTB, FM Deviation, Sweepless Sweep, Line Viewer and QAM Source. Standard Communication Features: RF Test Port (F-Type, Replaceable), US DOCSIS 3.0 Modem 8x4 (100/304 MBPS), RJ45 Electrical Ethernet Port (10/100MBPS), CM to RJ-45 Mode. The complete kit includes: 860 DSPi Meter, Protective Carrying Case, Shoulder Strap, US AC Power Cable and AC to DC Power Adapter & Battery Charger. Configured with: Power Pack (PP-1) and QAM (QA-2) Options

860 DSPi Field Analyzer

860 DSPi - US (PP-1, SR-1, QA-2 & RTB)

Configured with options

The 860 DSPi is a handheld spectrum analyzer with US DOCSIS 3.0 (8x4) modem that provides all of the testing power needed to ensure HFC networks operate to high standards. This includes balancing of the distribution system, maintaining analog and digital signal quality and controlling return path ingress. Standard Testing Features: 6 MHz Channel Spacing, Return Spectrum Analysis (4 to 65 MHz), Forward Spectrum Analysis (4 to 1000 MHz), Level Measurement, C/N Measurement, QAM Measurement (Level/MER/BER), Channel Plan Scan with Tilt Measurement, Ping, Trace Route, VoIP, Throughput, Cable Modem Statistics, Analog HUM, Depth of Modulation, CSO/CTB, FM Deviation, Sweepless Sweep, Line Viewer and QAM Source. Standard Communication Features: RF Test Port (F-Type, Replaceable), US DOCSIS 3.0 Modem 8x4 (100/304 MBPS), RJ45 Electrical Ethernet Port (10/100MBPS), CM to RJ-45 Mode. The complete kit includes: 860 DSPi Meter, Protective Carrying Case, Shoulder Strap, US AC Power Cable and AC to DC Power Adapter & Battery Charger. Configured with: Power Pack (PP-1), Return Tester RSVP (VP-1), QAM (QA-2) and Return Transmitter Board (RTB) Options
860 DSPi Field Analyzer

860 DSPi - US (PP-1, VP-1, QA-2 & RTB)

Configured with options

The 860 DSPi is a handheld spectrum analyzer with US DOCSIS 3.0 (8x4) modem that provides all of the testing power needed to ensure HFC networks operate to high standards. This includes balancing of the distribution system, maintaining analog and digital signal quality and controlling return path ingress. Standard Testing Features: 6 MHz Channel Spacing, Return Spectrum Analysis (4 to 65 MHz), Forward Spectrum Analysis (4 to 1000 MHz), Level Measurement, C/N Measurement, QAM Measurement (Level/MER/BER), Channel Plan Scan with Tilt Measurement, Ping, Trace Route, VoIP, Throughput, Cable Modem Statistics, Analog HUM, Depth of Modulation, CSO/CTB, FM Deviation, Sweepless Sweep, Line Viewer and QAM Source. Standard Communication Features: RF Test Port (F-Type, Replaceable), US DOCSIS 3.0 Modem 8x4 (100/304 MBPS), RJ45 Electrical Ethernet Port (10/100MBPS), CM to RJ-45 Mode. The complete kit includes: 860 DSPi Meter, Protective Carrying Case, Shoulder Strap, US AC Power Cable and AC to DC Power Adapter & Battery Charger. Configured with: Power Pack (PP-1), Return Sweep Receiver (SR-1), Return Tester RSVP (VP-1), QAM (QA-2) and Return Transmitter Board (RTB) Options
860 DSPi Field Analyzer

860 DSPi - US (PP-1, SR-1, VP-1, QA-2 & RTB)

Configured with options

The 860 DSPi is a handheld spectrum analyzer with US DOCSIS 3.0 (8x4) modem that provides all of the testing power needed to ensure HFC networks operate to high standards. This includes balancing of the distribution system, maintaining analog and digital signal quality and controlling return path ingress. Standard Testing Features: 6 MHz Channel Spacing, Return Spectrum Analysis (4 to 65 MHz), Forward Spectrum Analysis (4 to 1000 MHz), Level Measurement, C/N Measurement, QAM Measurement (Level/MER/BER), Channel Plan Scan with Tilt Measurement, Ping, Trace Route, VoIP, Throughput, Cable Modem Statistics, Analog HUM, Depth of Modulation, CSO/CTB, FM Deviation, Sweepless Sweep, Line Viewer and QAM Source. Standard Communication Features: RF Test Port (F-Type, Replaceable), US DOCSIS 3.0 Modem 8x4 (100/304 MBPS), RJ45 Electrical Ethernet Port (10/100MBPS), CM to RJ-45 Mode. The complete kit includes: 860 DSPi Meter, Protective Carrying Case, Shoulder Strap, US AC Power Cable and AC to DC Power Adapter & Battery Charger. Configured with: Power Pack (PP-1), Spectrum Analyzer (SA-1), QAM (QA-2) and Return Transmitter Board (RTB) Options
860 DSPi Field Analyzer

860 DSPi - US (PP-1, SA-1 & QA-2)

Configured with options

The 860 DSPi is a handheld spectrum analyzer with US DOCSIS 3.0 (8x4) modem that provides all of the testing power needed to ensure HFC networks operate to high standards. This includes balancing of the distribution system, maintaining analog and digital signal quality and controlling return path ingress. Standard Testing Features: 6 MHz Channel Spacing, Return Spectrum Analysis (4 to 65 MHz), Forward Spectrum Analysis (4 to 1000 MHz), Level Measurement, C/N Measurement, QAM Measurement (Level/MER/BER), Channel Plan Scan with Tilt Measurement, Ping, Trace Route, VoIP, Throughput, Cable Modem Statistics, Analog HUM, Depth of Modulation, CSO/CTB, FM Deviation, Sweepless Sweep, Line Viewer and QAM Source. Standard Communication Features: RF Test Port (F-Type, Replaceable), US DOCSIS 3.0 Modem 8x4 (100/304 MBPS), RJ45 Electrical Ethernet Port (10/100MBPS), CM to RJ-45 Mode. The complete kit includes: 860 DSPi Meter, Protective Carrying Case, Shoulder Strap, US AC Power Cable and AC to DC Power Adapter & Battery Charger. Configured with: Power Pack (PP-1), Spectrum Analyzer (SA-1) and QAM (QA-2) Options
860 DSPi Field Analyzer

860 DSPi - US (PP-1, SR-1, SA-1, QA-2 & RTB)

Configured with options

The 860 DSPi is a handheld spectrum analyzer with US DOCSIS 3.0 (8x4) modem that provides all of the testing power needed to ensure HFC networks operate to high standards. This includes balancing of the distribution system, maintaining analog and digital signal quality and controlling return path ingress. Standard Testing Features: 6 MHz Channel Spacing, Return Spectrum Analysis (4 to 65 MHz), Forward Spectrum Analysis (4 to 1000 MHz), Level Measurement, C/N Measurement, QAM Measurement (Level/MER/BER), Channel Plan Scan with Tilt Measurement, Ping, Trace Route, VoIP, Throughput, Cable Modem Statistics, Analog HUM, Depth of Modulation, CSO/CTB, FM Deviation, Sweepless Sweep, Line Viewer and QAM Source. Standard Communication Features: RF Test Port (F-Type, Replaceable), US DOCSIS 3.0 Modem 8x4 (100/304 MBPS), RJ45 Electrical Ethernet Port (10/100MBPS), CM to RJ-45 Mode. The complete kit includes: 860 DSPi Meter, Protective Carrying Case, Shoulder Strap, US AC Power Cable and AC to DC Power Adapter & Battery Charger. Configured with: Power Pack (PP-1), Return Tester RSVP (VP-1), Spectrum Analyzer (SA-1), QAM (QA-2) and Return Transmitter Board (RTB) Options
860 DSPi Field Analyzer

860 DSPi - US (PP-1, VP-1, SA-1, QA-2 & RTB)

Configured with options

The 860 DSPi is a handheld spectrum analyzer with US DOCSIS 3.0 (8x4) modem that provides all of the testing power needed to ensure HFC networks operate to high standards. This includes balancing of the distribution system, maintaining analog and digital signal quality and controlling return path ingress. Standard Testing Features: 6 MHz Channel Spacing, Return Spectrum Analysis (4 to 65 MHz), Forward Spectrum Analysis (4 to 1000 MHz), Level Measurement, C/N Measurement, QAM Measurement (Level/MER/BER), Channel Plan Scan with Tilt Measurement, Ping, Trace Route, VoIP, Throughput, Cable Modem Statistics, Analog HUM, Depth of Modulation, CSO/CTB, FM Deviation, Sweepless Sweep, Line Viewer and QAM Source. Standard Communication Features: RF Test Port (F-Type, Replaceable), US DOCSIS 3.0 Modem 8x4 (100/304 MBPS), RJ45 Electrical Ethernet Port (10/100MBPS), CM to RJ-45 Mode. The complete kit includes: 860 DSPi Meter, Protective Carrying Case, Shoulder Strap, US AC Power Cable and AC to DC Power Adapter & Battery Charger. Configured with: Power Pack (PP-1), Return Sweep Receiver (SR-1), Return Tester RSVP (VP-1), Spectrum Analyzer (SA-1), QAM (QA-2) and Return Transmitter Board (RTB) Options
860 DSPi Field Analyzer

860 DSPi - US (PP-1, SR-1, VP-1, SA-1, QA-2 & RTB)

Configured with options

The 860 DSPi is a handheld spectrum analyzer with US DOCSIS 3.0 (8x4) modem that provides all of the testing power needed to ensure HFC networks operate to high standards. This includes balancing of the distribution system, maintaining analog and digital signal quality and controlling return path ingress. Standard Testing Features: 6 MHz Channel Spacing, Return Spectrum Analysis (4 to 65 MHz), Forward Spectrum Analysis (4 to 1000 MHz), Level Measurement, C/N Measurement, QAM Measurement (Level/MER/BER), Channel Plan Scan with Tilt Measurement, Ping, Trace Route, VoIP, Throughput, Cable Modem Statistics, Analog HUM, Depth of Modulation, CSO/CTB, FM Deviation, Sweepless Sweep, Line Viewer and QAM Source. Standard Communication Features: RF Test Port (F-Type, Replaceable), US DOCSIS 3.0 Modem 8x4 (100/304 MBPS), RJ45 Electrical Ethernet Port (10/100MBPS), CM to RJ-45 Mode. The complete kit includes: 860 DSPi Meter, Protective Carrying Case, Shoulder Strap, US AC Power Cable and AC to DC Power Adapter & Battery Charger. Configured with: Power Pack (PP-1), Vestigial Side Band Modulation (VSB) and Return Transmitter Board (RTB) Options

860 DSPi Field Analyzer

860 DSPi - US (PP-1 & VSB)

Configured with options

The 860 DSPi is a handheld spectrum analyzer with US DOCSIS 3.0 (8x4) modem that provides all of the testing power needed to ensure HFC networks operate to high standards. This includes balancing of the distribution system, maintaining analog and digital signal quality and controlling return path ingress. Standard Testing Features: 6 MHz Channel Spacing, Return Spectrum Analysis (4 to 65 MHz), Forward Spectrum Analysis (4 to 1000 MHz), Level Measurement, C/N Measurement, QAM Measurement (Level/MER/BER), Channel Plan Scan with Tilt Measurement, Ping, Trace Route, VoIP, Throughput, Cable Modem Statistics, Analog HUM, Depth of Modulation, CSO/CTB, FM Deviation, Sweepless Sweep, Line Viewer and QAM Source. Standard Communication Features: RF Test Port (F-Type, Replaceable), US DOCSIS 3.0 Modem 8x4 (100/304 MBPS), RJ45 Electrical Ethernet Port (10/100MBPS), CM to RJ-45 Mode. The complete kit includes: 860 DSPi Meter, Protective Carrying Case, Shoulder Strap, US AC Power Cable and AC to DC Power Adapter & Battery Charger. Configured with: Power Pack (PP-1) and Vestigial Side Band Modulation (VSB) Options
860 DSPi Field Analyzer

860 DSPi - US (PP-1, SR-1, VSB & RTB)

Configured with options

The 860 DSPi is a handheld spectrum analyzer with US DOCSIS 3.0 (8x4) modem that provides all of the testing power needed to ensure HFC networks operate to high standards. This includes balancing of the distribution system, maintaining analog and digital signal quality and controlling return path ingress. Standard Testing Features: 6 MHz Channel Spacing, Return Spectrum Analysis (4 to 65 MHz), Forward Spectrum Analysis (4 to 1000 MHz), Level Measurement, C/N Measurement, QAM Measurement (Level/MER/BER), Channel Plan Scan with Tilt Measurement, Ping, Trace Route, VoIP, Throughput, Cable Modem Statistics, Analog HUM, Depth of Modulation, CSO/CTB, FM Deviation, Sweepless Sweep, Line Viewer and QAM Source. Standard Communication Features: RF Test Port (F-Type, Replaceable), US DOCSIS 3.0 Modem 8x4 (100/304 MBPS), RJ45 Electrical Ethernet Port (10/100MBPS), CM to RJ-45 Mode. The complete kit includes: 860 DSPi Meter, Protective Carrying Case, Shoulder Strap, US AC Power Cable and AC to DC Power Adapter & Battery Charger. Configured with: Power Pack (PP-1), Return Tester RSVP (VP-1), Vestigial Side Band Modulation (VSB) and Return Transmitter Board (RTB) Options
860 DSPi Field Analyzer

860 DSPi - US (PP-1, VP-1, VSB & RTB)

Configured with options

The 860 DSPi is a handheld spectrum analyzer with US DOCSIS 3.0 (8x4) modem that provides all of the testing power needed to ensure HFC networks operate to high standards. This includes balancing of the distribution system, maintaining analog and digital signal quality and controlling return path ingress. Standard Testing Features: 6 MHz Channel Spacing, Return Spectrum Analysis (4 to 65 MHz), Forward Spectrum Analysis (4 to 1000 MHz), Level Measurement, C/N Measurement, QAM Measurement (Level/MER/BER), Channel Plan Scan with Tilt Measurement, Ping, Trace Route, VoIP, Throughput, Cable Modem Statistics, Analog HUM, Depth of Modulation, CSO/CTB, FM Deviation, Sweepless Sweep, Line Viewer and QAM Source. Standard Communication Features: RF Test Port (F-Type, Replaceable), US DOCSIS 3.0 Modem 8x4 (100/304 MBPS), RJ45 Electrical Ethernet Port (10/100MBPS), CM to RJ-45 Mode. The complete kit includes: 860 DSPi Meter, Protective Carrying Case, Shoulder Strap, US AC Power Cable and AC to DC Power Adapter & Battery Charger. Configured with: Power Pack (PP-1), Return Sweep Receiver (SR-1), Return Tester RSVP (VP-1), Vestigial Side Band Modulation (VSB) and Return Transmitter Board (RTB) Options
860 DSPi Field Analyzer

860 DSPi - US (PP-1, SR-1, VP-1, VSB & RTB)

Configured with options

The 860 DSPi is a handheld spectrum analyzer with US DOCSIS 3.0 (8x4) modem that provides all of the testing power needed to ensure HFC networks operate to high standards. This includes balancing of the distribution system, maintaining analog and digital signal quality and controlling return path ingress. Standard Testing Features: 6 MHz Channel Spacing, Return Spectrum Analysis (4 to 65 MHz), Forward Spectrum Analysis (4 to 1000 MHz), Level Measurement, C/N Measurement, QAM Measurement (Level/MER/BER), Channel Plan Scan with Tilt Measurement, Ping, Trace Route, VoIP, Throughput, Cable Modem Statistics, Analog HUM, Depth of Modulation, CSO/CTB, FM Deviation, Sweepless Sweep, Line Viewer and QAM Source. Standard Communication Features: RF Test Port (F-Type, Replaceable), US DOCSIS 3.0 Modem 8x4 (100/304 MBPS), RJ45 Electrical Ethernet Port (10/100MBPS), CM to RJ-45 Mode. The complete kit includes: 860 DSPi Meter, Protective Carrying Case, Shoulder Strap, US AC Power Cable and AC to DC Power Adapter & Battery Charger. Configured with: Power Pack (PP-1), Spectrum Analyzer (SA-1), Vestigial Side Band Modulation (VSB) and Return Transmitter Board (RTB) Options
860 DSPi Field Analyzer

860 DSPi - US (PP-1, SA-1 & VSB)

Configured with options

The 860 DSPi is a handheld spectrum analyzer with US DOCSIS 3.0 (8x4) modem that provides all of the testing power needed to ensure HFC networks operate to high standards. This includes balancing of the distribution system, maintaining analog and digital signal quality and controlling return path ingress. Standard Testing Features: 6 MHz Channel Spacing, Return Spectrum Analysis (4 to 65 MHz), Forward Spectrum Analysis (4 to 1000 MHz), Level Measurement, C/N Measurement, QAM Measurement (Level/MER/BER), Channel Plan Scan with Tilt Measurement, Ping, Trace Route, VoIP, Throughput, Cable Modem Statistics, Analog HUM, Depth of Modulation, CSO/CTB, FM Deviation, Sweepless Sweep, Line Viewer and QAM Source. Standard Communication Features: RF Test Port (F-Type, Replaceable), US DOCSIS 3.0 Modem 8x4 (100/304 MBPS), RJ45 Electrical Ethernet Port (10/100MBPS), CM to RJ-45 Mode. The complete kit includes: 860 DSPi Meter, Protective Carrying Case, Shoulder Strap, US AC Power Cable and AC to DC Power Adapter & Battery Charger. Configured with: Power Pack (PP-1), Spectrum Analyzer (SA-1) and Vestigial Side Band Modulation (VSB) Options
860 DSPi Field Analyzer

860 DSPi - US (PP-1, SR-1, SA-1, VSB & RTB)

Configured with options

The 860 DSPi is a handheld spectrum analyzer with US DOCSIS 3.0 (8x4) modem that provides all of the testing power needed to ensure HFC networks operate to high standards. This includes balancing of the distribution system, maintaining analog and digital signal quality and controlling return path ingress. Standard Testing Features: 6 MHz Channel Spacing, Return Spectrum Analysis (4 to 65 MHz), Forward Spectrum Analysis (4 to 1000 MHz), Level Measurement, C/N Measurement, QAM Measurement (Level/MER/BER), Channel Plan Scan with Tilt Measurement, Ping, Trace Route, VoIP, Throughput, Cable Modem Statistics, Analog HUM, Depth of Modulation, CSO/CTB, FM Deviation, Sweepless Sweep, Line Viewer and QAM Source. Standard Communication Features: RF Test Port (F-Type, Replaceable), US DOCSIS 3.0 Modem 8x4 (100/304 MBPS), RJ45 Electrical Ethernet Port (10/100MBPS), CM to RJ-45 Mode. The complete kit includes: 860 DSPi Meter, Protective Carrying Case, Shoulder Strap, US AC Power Cable and AC to DC Power Adapter & Battery Charger. Configured with: Power Pack (PP-1), Return Tester RSVP (VP-1), Spectrum Analyzer (SA-1), Vestigial Side Band Modulation (VSB) and Return Transmitter Board (RTB) Options
860 DSPi Field Analyzer

860 DSPi - US (PP-1, VP-1, SA-1, VSB & RTB)

Configured with options

The 860 DSPi is a handheld spectrum analyzer with US DOCSIS 3.0 (8x4) modem that provides all of the testing power needed to ensure HFC networks operate to high standards. This includes balancing of the distribution system, maintaining analog and digital signal quality and controlling return path ingress. Standard Testing Features: 6 MHz Channel Spacing, Return Spectrum Analysis (4 to 65 MHz), Forward Spectrum Analysis (4 to 1000 MHz), Level Measurement, C/N Measurement, QAM Measurement (Level/MER/BER), Channel Plan Scan with Tilt Measurement, Ping, Trace Route, VoIP, Throughput, Cable Modem Statistics, Analog HUM, Depth of Modulation, CSO/CTB, FM Deviation, Sweepless Sweep, Line Viewer and QAM Source. Standard Communication Features: RF Test Port (F-Type, Replaceable), US DOCSIS 3.0 Modem 8x4 (100/304 MBPS), RJ45 Electrical Ethernet Port (10/100MBPS), CM to RJ-45 Mode. The complete kit includes: 860 DSPi Meter, Protective Carrying Case, Shoulder Strap, US AC Power Cable and AC to DC Power Adapter & Battery Charger. Configured with: Power Pack (PP-1), Return Sweep Receiver (SR-1), Return Tester RSVP (VP-1), Spectrum Analyzer (SA-1), Vestigial Side Band Modulation (VSB) and Return Transmitter Board (RTB) Options
860 DSPi Field Analyzer

860 DSPi - US (PP-1, SR-1, VP-1, SA-1, VSB & RTB)

Configured with options

The 860 DSPi is a handheld spectrum analyzer with US DOCSIS 3.0 (8x4) modem that provides all of the testing power needed to ensure HFC networks operate to high standards. This includes balancing of the distribution system, maintaining analog and digital signal quality and controlling return path ingress. Standard Testing Features: 6 MHz Channel Spacing, Return Spectrum Analysis (4 to 65 MHz), Forward Spectrum Analysis (4 to 1000 MHz), Level Measurement, C/N Measurement, QAM Measurement (Level/MER/BER), Channel Plan Scan with Tilt Measurement, Ping, Trace Route, VoIP, Throughput, Cable Modem Statistics, Analog HUM, Depth of Modulation, CSO/CTB, FM Deviation, Sweepless Sweep, Line Viewer and QAM Source. Standard Communication Features: RF Test Port (F-Type, Replaceable), US DOCSIS 3.0 Modem 8x4 (100/304 MBPS), RJ45 Electrical Ethernet Port (10/100MBPS), CM to RJ-45 Mode. The complete kit includes: 860 DSPi Meter, Protective Carrying Case, Shoulder Strap, US AC Power Cable and AC to DC Power Adapter & Battery Charger. Configured with: Power Pack (PP-1), QAM (QA-2), Vestigial Side Band Modulation (VSB) and Return Transmitter Board (RTB) Options
860 DSPi Field Analyzer

860 DSPi - US (PP-1, QA-2 & VSB)

Configured with options

The 860 DSPi is a handheld spectrum analyzer with US DOCSIS 3.0 (8x4) modem that provides all of the testing power needed to ensure HFC networks operate to high standards. This includes balancing of the distribution system, maintaining analog and digital signal quality and controlling return path ingress. Standard Testing Features: 6 MHz Channel Spacing, Return Spectrum Analysis (4 to 65 MHz), Forward Spectrum Analysis (4 to 1000 MHz), Level Measurement, C/N Measurement, QAM Measurement (Level/MER/BER), Channel Plan Scan with Tilt Measurement, Ping, Trace Route, VoIP, Throughput, Cable Modem Statistics, Analog HUM, Depth of Modulation, CSO/CTB, FM Deviation, Sweepless Sweep, Line Viewer and QAM Source. Standard Communication Features: RF Test Port (F-Type, Replaceable), US DOCSIS 3.0 Modem 8x4 (100/304 MBPS), RJ45 Electrical Ethernet Port (10/100MBPS), CM to RJ-45 Mode. The complete kit includes: 860 DSPi Meter, Protective Carrying Case, Shoulder Strap, US AC Power Cable and AC to DC Power Adapter & Battery Charger. Configured with: Power Pack (PP-1), QAM (QA-2) and Vestigial Side Band Modulation (VSB) Options
860 DSPi Field Analyzer

860 DSPi - US (PP-1, SR-1, QA-2, VSB & RTB)

Configured with options

The 860 DSPi is a handheld spectrum analyzer with US DOCSIS 3.0 (8x4) modem that provides all of the testing power needed to ensure HFC networks operate to high standards. This includes balancing of the distribution system, maintaining analog and digital signal quality and controlling return path ingress. Standard Testing Features: 6 MHz Channel Spacing, Return Spectrum Analysis (4 to 65 MHz), Forward Spectrum Analysis (4 to 1000 MHz), Level Measurement, C/N Measurement, QAM Measurement (Level/MER/BER), Channel Plan Scan with Tilt Measurement, Ping, Trace Route, VoIP, Throughput, Cable Modem Statistics, Analog HUM, Depth of Modulation, CSO/CTB, FM Deviation, Sweepless Sweep, Line Viewer and QAM Source. Standard Communication Features: RF Test Port (F-Type, Replaceable), US DOCSIS 3.0 Modem 8x4 (100/304 MBPS), RJ45 Electrical Ethernet Port (10/100MBPS), CM to RJ-45 Mode. The complete kit includes: 860 DSPi Meter, Protective Carrying Case, Shoulder Strap, US AC Power Cable and AC to DC Power Adapter & Battery Charger. Configured with: Power Pack (PP-1), Return Tester RSVP (VP-1), QAM (QA-2), Vestigial Side Band Modulation (VSB) and Return Transmitter Board (RTB) Options
860 DSPi Field Analyzer

860 DSPi - US (PP-1, VP-1, QA-2, VSB & RTB)

Configured with options

The 860 DSPi is a handheld spectrum analyzer with US DOCSIS 3.0 (8x4) modem that provides all of the testing power needed to ensure HFC networks operate to high standards. This includes balancing of the distribution system, maintaining analog and digital signal quality and controlling return path ingress. Standard Testing Features: 6 MHz Channel Spacing, Return Spectrum Analysis (4 to 65 MHz), Forward Spectrum Analysis (4 to 1000 MHz), Level Measurement, C/N Measurement, QAM Measurement (Level/MER/BER), Channel Plan Scan with Tilt Measurement, Ping, Trace Route, VoIP, Throughput, Cable Modem Statistics, Analog HUM, Depth of Modulation, CSO/CTB, FM Deviation, Sweepless Sweep, Line Viewer and QAM Source. Standard Communication Features: RF Test Port (F-Type, Replaceable), US DOCSIS 3.0 Modem 8x4 (100/304 MBPS), RJ45 Electrical Ethernet Port (10/100MBPS), CM to RJ-45 Mode. The complete kit includes: 860 DSPi Meter, Protective Carrying Case, Shoulder Strap, US AC Power Cable and AC to DC Power Adapter & Battery Charger. Configured with: Power Pack (PP-1), Return Sweep Receiver (SR-1), Spectrum Analyzer (SA-1), Forward Sweep (FS-1) and Return Transmitter Board (RTB) Options
860 DSPi Field Analyzer

860 DSPi - US (PP-1, SR-1, VP-1, QA-2, VSB & RTB)

Configured with options

The 860 DSPi is a handheld spectrum analyzer with US DOCSIS 3.0 (8x4) modem that provides all of the testing power needed to ensure HFC networks operate to high standards. This includes balancing of the distribution system, maintaining analog and digital signal quality and controlling return path ingress. Standard Testing Features: 6 MHz Channel Spacing, Return Spectrum Analysis (4 to 65 MHz), Forward Spectrum Analysis (4 to 1000 MHz), Level Measurement, C/N Measurement, QAM Measurement (Level/MER/BER), Channel Plan Scan with Tilt Measurement, Ping, Trace Route, VoIP, Throughput, Cable Modem Statistics, Analog HUM, Depth of Modulation, CSO/CTB, FM Deviation, Sweepless Sweep, Line Viewer and QAM Source. Standard Communication Features: RF Test Port (F-Type, Replaceable), US DOCSIS 3.0 Modem 8x4 (100/304 MBPS), RJ45 Electrical Ethernet Port (10/100MBPS), CM to RJ-45 Mode. The complete kit includes: 860 DSPi Meter, Protective Carrying Case, Shoulder Strap, US AC Power Cable and AC to DC Power Adapter & Battery Charger. Configured with: Power Pack (PP-1), Return Sweep Receiver (SR-1), Return Tester RSVP (VP-1), QAM (QA-2), Vestigial Side Band Modulation (VSB) and Return Transmitter Board (RTB) Options
860 DSPi Field Analyzer

860 DSPi - US (PP-1, SA-1 & QA-2 & VSB)

Configured with options

The 860 DSPi is a handheld spectrum analyzer with US DOCSIS 3.0 (8x4) modem that provides all of the testing power needed to ensure HFC networks operate to high standards. This includes balancing of the distribution system, maintaining analog and digital signal quality and controlling return path ingress. Standard Testing Features: 6 MHz Channel Spacing, Return Spectrum Analysis (4 to 65 MHz), Forward Spectrum Analysis (4 to 1000 MHz), Level Measurement, C/N Measurement, QAM Measurement (Level/MER/BER), Channel Plan Scan with Tilt Measurement, Ping, Trace Route, VoIP, Throughput, Cable Modem Statistics, Analog HUM, Depth of Modulation, CSO/CTB, FM Deviation, Sweepless Sweep, Line Viewer and QAM Source. Standard Communication Features: RF Test Port (F-Type, Replaceable), US DOCSIS 3.0 Modem 8x4 (100/304 MBPS), RJ45 Electrical Ethernet Port (10/100MBPS), CM to RJ-45 Mode. The complete kit includes: 860 DSPi Meter, Protective Carrying Case, Shoulder Strap, US AC Power Cable and AC to DC Power Adapter & Battery Charger. Configured with: Power Pack (PP-1), Spectrum Analyzer (SA-1), QAM (QA-2) and Vestigial Side Band Modulation (VSB) Options
860 DSPi Field Analyzer

860 DSPi - US (PP-1, SR-1, SA-1, QA-2, VSB & RTB)

Configured with options

The 860 DSPi is a handheld spectrum analyzer with US DOCSIS 3.0 (8x4) modem that provides all of the testing power needed to ensure HFC networks operate to high standards. This includes balancing of the distribution system, maintaining analog and digital signal quality and controlling return path ingress. Standard Testing Features: 6 MHz Channel Spacing, Return Spectrum Analysis (4 to 65 MHz), Forward Spectrum Analysis (4 to 1000 MHz), Level Measurement, C/N Measurement, QAM Measurement (Level/MER/BER), Channel Plan Scan with Tilt Measurement, Ping, Trace Route, VoIP, Throughput, Cable Modem Statistics, Analog HUM, Depth of Modulation, CSO/CTB, FM Deviation, Sweepless Sweep, Line Viewer and QAM Source. Standard Communication Features: RF Test Port (F-Type, Replaceable), US DOCSIS 3.0 Modem 8x4 (100/304 MBPS), RJ45 Electrical Ethernet Port (10/100MBPS), CM to RJ-45 Mode. The complete kit includes: 860 DSPi Meter, Protective Carrying Case, Shoulder Strap, US AC Power Cable and AC to DC Power Adapter & Battery Charger. Configured with: Power Pack (PP-1), Return Sweep Receiver (SR-1), Spectrum Analyzer (SA-1), QAM (QA-2), Vestigial Side Band Modulation (VSB) and Return Transmitter Board (RTB) Options
860 DSPi Field Analyzer

860 DSPi - US (PP-1, VP-1, SA-1, QA-2, VSB & RTB)

Configured with options

The 860 DSPi is a handheld spectrum analyzer with US DOCSIS 3.0 (8x4) modem that provides all of the testing power needed to ensure HFC networks operate to high standards. This includes balancing of the distribution system, maintaining analog and digital signal quality and controlling return path ingress. Standard Testing Features: 6 MHz Channel Spacing, Return Spectrum Analysis (4 to 65 MHz), Forward Spectrum Analysis (4 to 1000 MHz), Level Measurement, C/N Measurement, QAM Measurement (Level/MER/BER), Channel Plan Scan with Tilt Measurement, Ping, Trace Route, VoIP, Throughput, Cable Modem Statistics, Analog HUM, Depth of Modulation, CSO/CTB, FM Deviation, Sweepless Sweep, Line Viewer and QAM Source. Standard Communication Features: RF Test Port (F-Type, Replaceable), US DOCSIS 3.0 Modem 8x4 (100/304 MBPS), RJ45 Electrical Ethernet Port (10/100MBPS), CM to RJ-45 Mode. The complete kit includes: 860 DSPi Meter, Protective Carrying Case, Shoulder Strap, US AC Power Cable and AC to DC Power Adapter & Battery Charger. Configured with: Power Pack (PP-1), Return Tester RSVP (VP-1), Spectrum Analyzer (SA-1), QAM (QA-2), Vestigial Side Band Modulation (VSB) and Return Transmitter Board (RTB) Options
860 DSPi Field Analyzer

860 DSPi - US (PP-1, SR-1, VP-1, SA-1, QA-2, VSB & RTB)

Configured with options

The 860 DSPi is a handheld spectrum analyzer with US DOCSIS 3.0 (8x4) modem that provides all of the testing power needed to ensure HFC networks operate to high standards. This includes balancing of the distribution system, maintaining analog and digital signal quality and controlling return path ingress. Standard Testing Features: 6 MHz Channel Spacing, Return Spectrum Analysis (4 to 65 MHz), Forward Spectrum Analysis (4 to 1000 MHz), Level Measurement, C/N Measurement, QAM Measurement (Level/MER/BER), Channel Plan Scan with Tilt Measurement, Ping, Trace Route, VoIP, Throughput, Cable Modem Statistics, Analog HUM, Depth of Modulation, CSO/CTB, FM Deviation, Sweepless Sweep, Line Viewer and QAM Source. Standard Communication Features: RF Test Port (F-Type, Replaceable), US DOCSIS 3.0 Modem 8x4 (100/304 MBPS), RJ45 Electrical Ethernet Port (10/100MBPS), CM to RJ-45 Mode. The complete kit includes: 860 DSPi Meter, Protective Carrying Case, Shoulder Strap, US AC Power Cable and AC to DC Power Adapter & Battery Charger. Configured with: Power Pack (PP-1), Return Sweep Receiver (SR-1), Return Tester RSVP (VP-1), Spectrum Analyzer (SA-1), QAM (QA-2), Vestigial Side Band Modulation (VSB) and Return Transmitter Board (RTB) Options
860 DSPi Field Analyzer

860 DSPi - US (PP-1 & FS-1)

Configured with options

The 860 DSPi is a handheld spectrum analyzer with US DOCSIS 3.0 (8x4) modem that provides all of the testing power needed to ensure HFC networks operate to high standards. This includes balancing of the distribution system, maintaining analog and digital signal quality and controlling return path ingress. Standard Testing Features: 6 MHz Channel Spacing, Return Spectrum Analysis (4 to 65 MHz), Forward Spectrum Analysis (4 to 1000 MHz), Level Measurement, C/N Measurement, QAM Measurement (Level/MER/BER), Channel Plan Scan with Tilt Measurement, Ping, Trace Route, VoIP, Throughput, Cable Modem Statistics, Analog HUM, Depth of Modulation, CSO/CTB, FM Deviation, Sweepless Sweep, Line Viewer and QAM Source. Standard Communication Features: RF Test Port (F-Type, Replaceable), US DOCSIS 3.0 Modem 8x4 (100/304 MBPS), RJ45 Electrical Ethernet Port (10/100MBPS), CM to RJ-45 Mode. The complete kit includes: 860 DSPi Meter, Protective Carrying Case, Shoulder Strap, US AC Power Cable and AC to DC Power Adapter & Battery Charger. Configured with: Power Pack (PP-1) and Forward Sweep (FS-1) Options
860 DSPi Field Analyzer

860 DSPi - US (PP-1, SR-1, FS-1 & RTB)

Configured with options

The 860 DSPi is a handheld spectrum analyzer with US DOCSIS 3.0 (8x4) modem that provides all of the testing power needed to ensure HFC networks operate to high standards. This includes balancing of the distribution system, maintaining analog and digital signal quality and controlling return path ingress. Standard Testing Features: 6 MHz Channel Spacing, Return Spectrum Analysis (4 to 65 MHz), Forward Spectrum Analysis (4 to 1000 MHz), Level Measurement, C/N Measurement, QAM Measurement (Level/MER/BER), Channel Plan Scan with Tilt Measurement, Ping, Trace Route, VoIP, Throughput, Cable Modem Statistics, Analog HUM, Depth of Modulation, CSO/CTB, FM Deviation, Sweepless Sweep, Line Viewer and QAM Source. Standard Communication Features: RF Test Port (F-Type, Replaceable), US DOCSIS 3.0 Modem 8x4 (100/304 MBPS), RJ45 Electrical Ethernet Port (10/100MBPS), CM to RJ-45 Mode. The complete kit includes: 860 DSPi Meter, Protective Carrying Case, Shoulder Strap, US AC Power Cable and AC to DC Power Adapter & Battery Charger. Configured with: Power Pack (PP-1), Return Sweep Receiver (SR-1), Forward Sweep (FS-1) and Return Transmitter Board (RTB) Options
860 DSPi Field Analyzer

860 DSPi - US (PP-1, VP-1, FS-1 & RTB)

Configured with options

The 860 DSPi is a handheld spectrum analyzer with US DOCSIS 3.0 (8x4) modem that provides all of the testing power needed to ensure HFC networks operate to high standards. This includes balancing of the distribution system, maintaining analog and digital signal quality and controlling return path ingress. Standard Testing Features: 6 MHz Channel Spacing, Return Spectrum Analysis (4 to 65 MHz), Forward Spectrum Analysis (4 to 1000 MHz), Level Measurement, C/N Measurement, QAM Measurement (Level/MER/BER), Channel Plan Scan with Tilt Measurement, Ping, Trace Route, VoIP, Throughput, Cable Modem Statistics, Analog HUM, Depth of Modulation, CSO/CTB, FM Deviation, Sweepless Sweep, Line Viewer and QAM Source. Standard Communication Features: RF Test Port (F-Type, Replaceable), US DOCSIS 3.0 Modem 8x4 (100/304 MBPS), RJ45 Electrical Ethernet Port (10/100MBPS), CM to RJ-45 Mode. The complete kit includes: 860 DSPi Meter, Protective Carrying Case, Shoulder Strap, US AC Power Cable and AC to DC Power Adapter & Battery Charger. Configured with: Power Pack (PP-1), Return Tester RSVP (VP-1), Forward Sweep (FS-1) and Return Transmitter Board (RTB) Options
860 DSPi Field Analyzer

860 DSPi - US (PP-1, SR-1, VP-1, FS-1 & RTB)

Configured with options

The 860 DSPi is a handheld spectrum analyzer with US DOCSIS 3.0 (8x4) modem that provides all of the testing power needed to ensure HFC networks operate to high standards. This includes balancing of the distribution system, maintaining analog and digital signal quality and controlling return path ingress. Standard Testing Features: 6 MHz Channel Spacing, Return Spectrum Analysis (4 to 65 MHz), Forward Spectrum Analysis (4 to 1000 MHz), Level Measurement, C/N Measurement, QAM Measurement (Level/MER/BER), Channel Plan Scan with Tilt Measurement, Ping, Trace Route, VoIP, Throughput, Cable Modem Statistics, Analog HUM, Depth of Modulation, CSO/CTB, FM Deviation, Sweepless Sweep, Line Viewer and QAM Source. Standard Communication Features: RF Test Port (F-Type, Replaceable), US DOCSIS 3.0 Modem 8x4 (100/304 MBPS), RJ45 Electrical Ethernet Port (10/100MBPS), CM to RJ-45 Mode. The complete kit includes: 860 DSPi Meter, Protective Carrying Case, Shoulder Strap, US AC Power Cable and AC to DC Power Adapter & Battery Charger. Configured with: Power Pack (PP-1), Return Sweep Receiver (SR-1), Return Tester RSVP (VP-1), Forward Sweep (FS-1) and Return Transmitter Board (RTB) Options
860 DSPi Field Analyzer

860 DSPi - US (PP-1, SA-1 & FS-1)

Configured with options

The 860 DSPi is a handheld spectrum analyzer with US DOCSIS 3.0 (8x4) modem that provides all of the testing power needed to ensure HFC networks operate to high standards. This includes balancing of the distribution system, maintaining analog and digital signal quality and controlling return path ingress. Standard Testing Features: 6 MHz Channel Spacing, Return Spectrum Analysis (4 to 65 MHz), Forward Spectrum Analysis (4 to 1000 MHz), Level Measurement, C/N Measurement, QAM Measurement (Level/MER/BER), Channel Plan Scan with Tilt Measurement, Ping, Trace Route, VoIP, Throughput, Cable Modem Statistics, Analog HUM, Depth of Modulation, CSO/CTB, FM Deviation, Sweepless Sweep, Line Viewer and QAM Source. Standard Communication Features: RF Test Port (F-Type, Replaceable), US DOCSIS 3.0 Modem 8x4 (100/304 MBPS), RJ45 Electrical Ethernet Port (10/100MBPS), CM to RJ-45 Mode. The complete kit includes: 860 DSPi Meter, Protective Carrying Case, Shoulder Strap, US AC Power Cable and AC to DC Power Adapter & Battery Charger. Configured with: Power Pack (PP-1), Spectrum Analyzer (SA-1) and Forward Sweep (FS-1) Options
860 DSPi Field Analyzer

860 DSPi - US (PP-1, SR-1, SA-1, FS-1 & RTB)

Configured with options

The 860 DSPi is a handheld spectrum analyzer with US DOCSIS 3.0 (8x4) modem that provides all of the testing power needed to ensure HFC networks operate to high standards. This includes balancing of the distribution system, maintaining analog and digital signal quality and controlling return path ingress. Standard Testing Features: 6 MHz Channel Spacing, Return Spectrum Analysis (4 to 65 MHz), Forward Spectrum Analysis (4 to 1000 MHz), Level Measurement, C/N Measurement, QAM Measurement (Level/MER/BER), Channel Plan Scan with Tilt Measurement, Ping, Trace Route, VoIP, Throughput, Cable Modem Statistics, Analog HUM, Depth of Modulation, CSO/CTB, FM Deviation, Sweepless Sweep, Line Viewer and QAM Source. Standard Communication Features: RF Test Port (F-Type, Replaceable), US DOCSIS 3.0 Modem 8x4 (100/304 MBPS), RJ45 Electrical Ethernet Port (10/100MBPS), CM to RJ-45 Mode. The complete kit includes: 860 DSPi Meter, Protective Carrying Case, Shoulder Strap, US AC Power Cable and AC to DC Power Adapter & Battery Charger. Configured with: Power Pack (PP-1), Return Tester RSVP (VP-1), Spectrum Analyzer (SA-1), Forward Sweep (FS-1) and Return Transmitter Board (RTB) Options
860 DSPi Field Analyzer

860 DSPi - US (PP-1, VP-1, SA-1, FS-1 & RTB)

Configured with options

The 860 DSPi is a handheld spectrum analyzer with US DOCSIS 3.0 (8x4) modem that provides all of the testing power needed to ensure HFC networks operate to high standards. This includes balancing of the distribution system, maintaining analog and digital signal quality and controlling return path ingress. Standard Testing Features: 6 MHz Channel Spacing, Return Spectrum Analysis (4 to 65 MHz), Forward Spectrum Analysis (4 to 1000 MHz), Level Measurement, C/N Measurement, QAM Measurement (Level/MER/BER), Channel Plan Scan with Tilt Measurement, Ping, Trace Route, VoIP, Throughput, Cable Modem Statistics, Analog HUM, Depth of Modulation, CSO/CTB, FM Deviation, Sweepless Sweep, Line Viewer and QAM Source. Standard Communication Features: RF Test Port (F-Type, Replaceable), US DOCSIS 3.0 Modem 8x4 (100/304 MBPS), RJ45 Electrical Ethernet Port (10/100MBPS), CM to RJ-45 Mode. The complete kit includes: 860 DSPi Meter, Protective Carrying Case, Shoulder Strap, US AC Power Cable and AC to DC Power Adapter & Battery Charger. Configured with: Power Pack (PP-1), Return Sweep Receiver (SR-1), Return Tester RSVP (VP-1), Spectrum Analyzer (SA-1), Forward Sweep (FS-1) and Return Transmitter Board (RTB) Options
860 DSPi Field Analyzer

860 DSPi - US (PP-1, SR-1, VP-1, SA-1, FS-1 & RTB)

Configured with options

The 860 DSPi is a handheld spectrum analyzer with US DOCSIS 3.0 (8x4) modem that provides all of the testing power needed to ensure HFC networks operate to high standards. This includes balancing of the distribution system, maintaining analog and digital signal quality and controlling return path ingress. Standard Testing Features: 6 MHz Channel Spacing, Return Spectrum Analysis (4 to 65 MHz), Forward Spectrum Analysis (4 to 1000 MHz), Level Measurement, C/N Measurement, QAM Measurement (Level/MER/BER), Channel Plan Scan with Tilt Measurement, Ping, Trace Route, VoIP, Throughput, Cable Modem Statistics, Analog HUM, Depth of Modulation, CSO/CTB, FM Deviation, Sweepless Sweep, Line Viewer and QAM Source. Standard Communication Features: RF Test Port (F-Type, Replaceable), US DOCSIS 3.0 Modem 8x4 (100/304 MBPS), RJ45 Electrical Ethernet Port (10/100MBPS), CM to RJ-45 Mode. The complete kit includes: 860 DSPi Meter, Protective Carrying Case, Shoulder Strap, US AC Power Cable and AC to DC Power Adapter & Battery Charger. Configured with: Power Pack (PP-1), QAM (QA-2), Forward Sweep (FS-1) and Return Transmitter Board (RTB) Options
860 DSPi Field Analyzer

860 DSPi - US (PP-1, QA-2 & FS-1)

Configured with options

The 860 DSPi is a handheld spectrum analyzer with US DOCSIS 3.0 (8x4) modem that provides all of the testing power needed to ensure HFC networks operate to high standards. This includes balancing of the distribution system, maintaining analog and digital signal quality and controlling return path ingress. Standard Testing Features: 6 MHz Channel Spacing, Return Spectrum Analysis (4 to 65 MHz), Forward Spectrum Analysis (4 to 1000 MHz), Level Measurement, C/N Measurement, QAM Measurement (Level/MER/BER), Channel Plan Scan with Tilt Measurement, Ping, Trace Route, VoIP, Throughput, Cable Modem Statistics, Analog HUM, Depth of Modulation, CSO/CTB, FM Deviation, Sweepless Sweep, Line Viewer and QAM Source. Standard Communication Features: RF Test Port (F-Type, Replaceable), US DOCSIS 3.0 Modem 8x4 (100/304 MBPS), RJ45 Electrical Ethernet Port (10/100MBPS), CM to RJ-45 Mode. The complete kit includes: 860 DSPi Meter, Protective Carrying Case, Shoulder Strap, US AC Power Cable and AC to DC Power Adapter & Battery Charger. Configured with: Power Pack (PP-1), QAM (QA-2) and Forward Sweep (FS-1) Options
860 DSPi Field Analyzer

860 DSPi - US (PP-1, SR-1, QA-2, FS-1 & RTB)

Configured with options

The 860 DSPi is a handheld spectrum analyzer with US DOCSIS 3.0 (8x4) modem that provides all of the testing power needed to ensure HFC networks operate to high standards. This includes balancing of the distribution system, maintaining analog and digital signal quality and controlling return path ingress. Standard Testing Features: 6 MHz Channel Spacing, Return Spectrum Analysis (4 to 65 MHz), Forward Spectrum Analysis (4 to 1000 MHz), Level Measurement, C/N Measurement, QAM Measurement (Level/MER/BER), Channel Plan Scan with Tilt Measurement, Ping, Trace Route, VoIP, Throughput, Cable Modem Statistics, Analog HUM, Depth of Modulation, CSO/CTB, FM Deviation, Sweepless Sweep, Line Viewer and QAM Source. Standard Communication Features: RF Test Port (F-Type, Replaceable), US DOCSIS 3.0 Modem 8x4 (100/304 MBPS), RJ45 Electrical Ethernet Port (10/100MBPS), CM to RJ-45 Mode. The complete kit includes: 860 DSPi Meter, Protective Carrying Case, Shoulder Strap, US AC Power Cable and AC to DC Power Adapter & Battery Charger. Configured with: Power Pack (PP-1), Return Sweep Receiver (SR-1), QAM (QA-2), Forward Sweep (FS-1) and Return Transmitter Board (RTB) Options
860 DSPi Field Analyzer

860 DSPi - US (PP-1, VP-1, QA-2, FS-1 & RTB)

Configured with options

The 860 DSPi is a handheld spectrum analyzer with US DOCSIS 3.0 (8x4) modem that provides all of the testing power needed to ensure HFC networks operate to high standards. This includes balancing of the distribution system, maintaining analog and digital signal quality and controlling return path ingress. Standard Testing Features: 6 MHz Channel Spacing, Return Spectrum Analysis (4 to 65 MHz), Forward Spectrum Analysis (4 to 1000 MHz), Level Measurement, C/N Measurement, QAM Measurement (Level/MER/BER), Channel Plan Scan with Tilt Measurement, Ping, Trace Route, VoIP, Throughput, Cable Modem Statistics, Analog HUM, Depth of Modulation, CSO/CTB, FM Deviation, Sweepless Sweep, Line Viewer and QAM Source. Standard Communication Features: RF Test Port (F-Type, Replaceable), US DOCSIS 3.0 Modem 8x4 (100/304 MBPS), RJ45 Electrical Ethernet Port (10/100MBPS), CM to RJ-45 Mode. The complete kit includes: 860 DSPi Meter, Protective Carrying Case, Shoulder Strap, US AC Power Cable and AC to DC Power Adapter & Battery Charger. Configured with: Power Pack (PP-1), Return Tester RSVP (VP-1), QAM (QA-2), Forward Sweep (FS-1) and Return Transmitter Board (RTB) Options
860 DSPi Field Analyzer

860 DSPi - US (PP-1, SR-1, VP-1, QA-2, FS-1 & RTB)

Configured with options

The 860 DSPi is a handheld spectrum analyzer with US DOCSIS 3.0 (8x4) modem that provides all of the testing power needed to ensure HFC networks operate to high standards. This includes balancing of the distribution system, maintaining analog and digital signal quality and controlling return path ingress. Standard Testing Features: 6 MHz Channel Spacing, Return Spectrum Analysis (4 to 65 MHz), Forward Spectrum Analysis (4 to 1000 MHz), Level Measurement, C/N Measurement, QAM Measurement (Level/MER/BER), Channel Plan Scan with Tilt Measurement, Ping, Trace Route, VoIP, Throughput, Cable Modem Statistics, Analog HUM, Depth of Modulation, CSO/CTB, FM Deviation, Sweepless Sweep, Line Viewer and QAM Source. Standard Communication Features: RF Test Port (F-Type, Replaceable), US DOCSIS 3.0 Modem 8x4 (100/304 MBPS), RJ45 Electrical Ethernet Port (10/100MBPS), CM to RJ-45 Mode. The complete kit includes: 860 DSPi Meter, Protective Carrying Case, Shoulder Strap, US AC Power Cable and AC to DC Power Adapter & Battery Charger. Configured with: Power Pack (PP-1), Return Sweep Receiver (SR-1), Return Tester RSVP (VP-1), QAM (QA-2), Forward Sweep (FS-1) and Return Transmitter Board (RTB) Options
860 DSPi Field Analyzer

860 DSPi - US (PP-1, SA-1, QA-2 & FS-1)

Configured with options

The 860 DSPi is a handheld spectrum analyzer with US DOCSIS 3.0 (8x4) modem that provides all of the testing power needed to ensure HFC networks operate to high standards. This includes balancing of the distribution system, maintaining analog and digital signal quality and controlling return path ingress. Standard Testing Features: 6 MHz Channel Spacing, Return Spectrum Analysis (4 to 65 MHz), Forward Spectrum Analysis (4 to 1000 MHz), Level Measurement, C/N Measurement, QAM Measurement (Level/MER/BER), Channel Plan Scan with Tilt Measurement, Ping, Trace Route, VoIP, Throughput, Cable Modem Statistics, Analog HUM, Depth of Modulation, CSO/CTB, FM Deviation, Sweepless Sweep, Line Viewer and QAM Source. Standard Communication Features: RF Test Port (F-Type, Replaceable), US DOCSIS 3.0 Modem 8x4 (100/304 MBPS), RJ45 Electrical Ethernet Port (10/100MBPS), CM to RJ-45 Mode. The complete kit includes: 860 DSPi Meter, Protective Carrying Case, Shoulder Strap, US AC Power Cable and AC to DC Power Adapter & Battery Charger. Configured with: Power Pack (PP-1), Spectrum Analyzer (SA-1), QAM (QA-2) and Forward Sweep (FS-1) Options
860 DSPi Field Analyzer

860 DSPi - US (PP-1, SR-1, SA-1, QA-2, FS-1 & RTB)

Configured with options

The 860 DSPi is a handheld spectrum analyzer with US DOCSIS 3.0 (8x4) modem that provides all of the testing power needed to ensure HFC networks operate to high standards. This includes balancing of the distribution system, maintaining analog and digital signal quality and controlling return path ingress. Standard Testing Features: 6 MHz Channel Spacing, Return Spectrum Analysis (4 to 65 MHz), Forward Spectrum Analysis (4 to 1000 MHz), Level Measurement, C/N Measurement, QAM Measurement (Level/MER/BER), Channel Plan Scan with Tilt Measurement, Ping, Trace Route, VoIP, Throughput, Cable Modem Statistics, Analog HUM, Depth of Modulation, CSO/CTB, FM Deviation, Sweepless Sweep, Line Viewer and QAM Source. Standard Communication Features: RF Test Port (F-Type, Replaceable), US DOCSIS 3.0 Modem 8x4 (100/304 MBPS), RJ45 Electrical Ethernet Port (10/100MBPS), CM to RJ-45 Mode. The complete kit includes: 860 DSPi Meter, Protective Carrying Case, Shoulder Strap, US AC Power Cable and AC to DC Power Adapter & Battery Charger. Configured with: Power Pack (PP-1), Return Sweep Receiver (SR-1), Spectrum Analyzer (SA-1), QAM (QA-2), Forward Sweep (FS-1) and Return Transmitter Board (RTB) Options
860 DSPi Field Analyzer

860 DSPi - US (PP-1, VP-1, SA-1, QA-2, FS-1 & RTB)

Configured with options

The 860 DSPi is a handheld spectrum analyzer with US DOCSIS 3.0 (8x4) modem that provides all of the testing power needed to ensure HFC networks operate to high standards. This includes balancing of the distribution system, maintaining analog and digital signal quality and controlling return path ingress. Standard Testing Features: 6 MHz Channel Spacing, Return Spectrum Analysis (4 to 65 MHz), Forward Spectrum Analysis (4 to 1000 MHz), Level Measurement, C/N Measurement, QAM Measurement (Level/MER/BER), Channel Plan Scan with Tilt Measurement, Ping, Trace Route, VoIP, Throughput, Cable Modem Statistics, Analog HUM, Depth of Modulation, CSO/CTB, FM Deviation, Sweepless Sweep, Line Viewer and QAM Source. Standard Communication Features: RF Test Port (F-Type, Replaceable), US DOCSIS 3.0 Modem 8x4 (100/304 MBPS), RJ45 Electrical Ethernet Port (10/100MBPS), CM to RJ-45 Mode. The complete kit includes: 860 DSPi Meter, Protective Carrying Case, Shoulder Strap, US AC Power Cable and AC to DC Power Adapter & Battery Charger. Configured with: Power Pack (PP-1), Return Tester RSVP (VP-1), Spectrum Analyzer (SA-1), QAM (QA-2), Forward Sweep (FS-1) and Return Transmitter Board (RTB) Options
860 DSPi Field Analyzer

860 DSPi - US (PP-1, SR-1, VP-1, SA-1, QA-2, FS-1 & RTB)

Configured with options

The 860 DSPi is a handheld spectrum analyzer with US DOCSIS 3.0 (8x4) modem that provides all of the testing power needed to ensure HFC networks operate to high standards. This includes balancing of the distribution system, maintaining analog and digital signal quality and controlling return path ingress. Standard Testing Features: 6 MHz Channel Spacing, Return Spectrum Analysis (4 to 65 MHz), Forward Spectrum Analysis (4 to 1000 MHz), Level Measurement, C/N Measurement, QAM Measurement (Level/MER/BER), Channel Plan Scan with Tilt Measurement, Ping, Trace Route, VoIP, Throughput, Cable Modem Statistics, Analog HUM, Depth of Modulation, CSO/CTB, FM Deviation, Sweepless Sweep, Line Viewer and QAM Source. Standard Communication Features: RF Test Port (F-Type, Replaceable), US DOCSIS 3.0 Modem 8x4 (100/304 MBPS), RJ45 Electrical Ethernet Port (10/100MBPS), CM to RJ-45 Mode. The complete kit includes: 860 DSPi Meter, Protective Carrying Case, Shoulder Strap, US AC Power Cable and AC to DC Power Adapter & Battery Charger. Configured with: Power Pack (PP-1), Return Sweep Receiver (SR-1), Return Tester RSVP (VP-1), Spectrum Analyzer (SA-1), QAM (QA-2), Forward Sweep (FS-1) and Return Transmitter Board (RTB) Options
860 DSPi Field Analyzer

860 DSPi - US (PP-1, VSB & FS-1)

Configured with options

The 860 DSPi is a handheld spectrum analyzer with US DOCSIS 3.0 (8x4) modem that provides all of the testing power needed to ensure HFC networks operate to high standards. This includes balancing of the distribution system, maintaining analog and digital signal quality and controlling return path ingress. Standard Testing Features: 6 MHz Channel Spacing, Return Spectrum Analysis (4 to 65 MHz), Forward Spectrum Analysis (4 to 1000 MHz), Level Measurement, C/N Measurement, QAM Measurement (Level/MER/BER), Channel Plan Scan with Tilt Measurement, Ping, Trace Route, VoIP, Throughput, Cable Modem Statistics, Analog HUM, Depth of Modulation, CSO/CTB, FM Deviation, Sweepless Sweep, Line Viewer and QAM Source. Standard Communication Features: RF Test Port (F-Type, Replaceable), US DOCSIS 3.0 Modem 8x4 (100/304 MBPS), RJ45 Electrical Ethernet Port (10/100MBPS), CM to RJ-45 Mode. The complete kit includes: 860 DSPi Meter, Protective Carrying Case, Shoulder Strap, US AC Power Cable and AC to DC Power Adapter & Battery Charger. Configured with: Power Pack (PP-1), Vestigial Side Band Modulation (VSB) and Forward Sweep (FS-1) Options
860 DSPi Field Analyzer

860 DSPi - US (PP-1, SR-1, VSB, FS-1 & RTB)

Configured with options

The 860 DSPi is a handheld spectrum analyzer with US DOCSIS 3.0 (8x4) modem that provides all of the testing power needed to ensure HFC networks operate to high standards. This includes balancing of the distribution system, maintaining analog and digital signal quality and controlling return path ingress. Standard Testing Features: 6 MHz Channel Spacing, Return Spectrum Analysis (4 to 65 MHz), Forward Spectrum Analysis (4 to 1000 MHz), Level Measurement, C/N Measurement, QAM Measurement (Level/MER/BER), Channel Plan Scan with Tilt Measurement, Ping, Trace Route, VoIP, Throughput, Cable Modem Statistics, Analog HUM, Depth of Modulation, CSO/CTB, FM Deviation, Sweepless Sweep, Line Viewer and QAM Source. Standard Communication Features: RF Test Port (F-Type, Replaceable), US DOCSIS 3.0 Modem 8x4 (100/304 MBPS), RJ45 Electrical Ethernet Port (10/100MBPS), CM to RJ-45 Mode. The complete kit includes: 860 DSPi Meter, Protective Carrying Case, Shoulder Strap, US AC Power Cable and AC to DC Power Adapter & Battery Charger. Configured with: Power Pack (PP-1), Return Sweep Receiver (SR-1), Vestigial Side Band Modulation (VSB), Forward Sweep (FS-1) and Return Transmitter Board (RTB) Options
860 DSPi Field Analyzer

860 DSPi - US (PP-1, VP-1, VSB, FS-1 & RTB)

Configured with options

The 860 DSPi is a handheld spectrum analyzer with US DOCSIS 3.0 (8x4) modem that provides all of the testing power needed to ensure HFC networks operate to high standards. This includes balancing of the distribution system, maintaining analog and digital signal quality and controlling return path ingress. Standard Testing Features: 6 MHz Channel Spacing, Return Spectrum Analysis (4 to 65 MHz), Forward Spectrum Analysis (4 to 1000 MHz), Level Measurement, C/N Measurement, QAM Measurement (Level/MER/BER), Channel Plan Scan with Tilt Measurement, Ping, Trace Route, VoIP, Throughput, Cable Modem Statistics, Analog HUM, Depth of Modulation, CSO/CTB, FM Deviation, Sweepless Sweep, Line Viewer and QAM Source. Standard Communication Features: RF Test Port (F-Type, Replaceable), US DOCSIS 3.0 Modem 8x4 (100/304 MBPS), RJ45 Electrical Ethernet Port (10/100MBPS), CM to RJ-45 Mode. The complete kit includes: 860 DSPi Meter, Protective Carrying Case, Shoulder Strap, US AC Power Cable and AC to DC Power Adapter & Battery Charger. Configured with: Power Pack (PP-1), Return Tester RSVP (VP-1), Vestigial Side Band Modulation (VSB), Forward Sweep (FS-1) and Return Transmitter Board (RTB) Options
860 DSPi Field Analyzer

860 DSPi - US (PP-1, SR-1, VP-1, VSB, FS-1 & RTB)

Configured with options

The 860 DSPi is a handheld spectrum analyzer with US DOCSIS 3.0 (8x4) modem that provides all of the testing power needed to ensure HFC networks operate to high standards. This includes balancing of the distribution system, maintaining analog and digital signal quality and controlling return path ingress. Standard Testing Features: 6 MHz Channel Spacing, Return Spectrum Analysis (4 to 65 MHz), Forward Spectrum Analysis (4 to 1000 MHz), Level Measurement, C/N Measurement, QAM Measurement (Level/MER/BER), Channel Plan Scan with Tilt Measurement, Ping, Trace Route, VoIP, Throughput, Cable Modem Statistics, Analog HUM, Depth of Modulation, CSO/CTB, FM Deviation, Sweepless Sweep, Line Viewer and QAM Source. Standard Communication Features: RF Test Port (F-Type, Replaceable), US DOCSIS 3.0 Modem 8x4 (100/304 MBPS), RJ45 Electrical Ethernet Port (10/100MBPS), CM to RJ-45 Mode. The complete kit includes: 860 DSPi Meter, Protective Carrying Case, Shoulder Strap, US AC Power Cable and AC to DC Power Adapter & Battery Charger. Configured with: Power Pack (PP-1), Return Sweep Receiver (SR-1), Return Tester RSVP (VP-1), Vestigial Side Band Modulation (VSB), Forward Sweep (FS-1) and Return Transmitter Board (RTB) Options
860 DSPi Field Analyzer

860 DSPi - US (PP-1, SA-1, VSB & FS-1)

Configured with options

The 860 DSPi is a handheld spectrum analyzer with US DOCSIS 3.0 (8x4) modem that provides all of the testing power needed to ensure HFC networks operate to high standards. This includes balancing of the distribution system, maintaining analog and digital signal quality and controlling return path ingress. Standard Testing Features: 6 MHz Channel Spacing, Return Spectrum Analysis (4 to 65 MHz), Forward Spectrum Analysis (4 to 1000 MHz), Level Measurement, C/N Measurement, QAM Measurement (Level/MER/BER), Channel Plan Scan with Tilt Measurement, Ping, Trace Route, VoIP, Throughput, Cable Modem Statistics, Analog HUM, Depth of Modulation, CSO/CTB, FM Deviation, Sweepless Sweep, Line Viewer and QAM Source. Standard Communication Features: RF Test Port (F-Type, Replaceable), US DOCSIS 3.0 Modem 8x4 (100/304 MBPS), RJ45 Electrical Ethernet Port (10/100MBPS), CM to RJ-45 Mode. The complete kit includes: 860 DSPi Meter, Protective Carrying Case, Shoulder Strap, US AC Power Cable and AC to DC Power Adapter & Battery Charger. Configured with: Power Pack (PP-1), Spectrum Analyzer (SA-1), Vestigial Side Band Modulation (VSB) and Forward Sweep (FS-1) Options
860 DSPi Field Analyzer

860 DSPi - US (PP-1, SR-1, SA-1, VSB, FS-1 & RTB)

Configured with options

The 860 DSPi is a handheld spectrum analyzer with US DOCSIS 3.0 (8x4) modem that provides all of the testing power needed to ensure HFC networks operate to high standards. This includes balancing of the distribution system, maintaining analog and digital signal quality and controlling return path ingress. Standard Testing Features: 6 MHz Channel Spacing, Return Spectrum Analysis (4 to 65 MHz), Forward Spectrum Analysis (4 to 1000 MHz), Level Measurement, C/N Measurement, QAM Measurement (Level/MER/BER), Channel Plan Scan with Tilt Measurement, Ping, Trace Route, VoIP, Throughput, Cable Modem Statistics, Analog HUM, Depth of Modulation, CSO/CTB, FM Deviation, Sweepless Sweep, Line Viewer and QAM Source. Standard Communication Features: RF Test Port (F-Type, Replaceable), US DOCSIS 3.0 Modem 8x4 (100/304 MBPS), RJ45 Electrical Ethernet Port (10/100MBPS), CM to RJ-45 Mode. The complete kit includes: 860 DSPi Meter, Protective Carrying Case, Shoulder Strap, US AC Power Cable and AC to DC Power Adapter & Battery Charger. Configured with: Power Pack (PP-1), Return Sweep Receiver (SR-1), Spectrum Analyzer (SA-1), Vestigial Side Band Modulation (VSB), Forward Sweep (FS-1) and Return Transmitter Board (RTB) Options
860 DSPi Field Analyzer

860 DSPi - US (PP-1, VP-1, SA-1, VSB, FS-1 & RTB)

Configured with options

The 860 DSPi is a handheld spectrum analyzer with US DOCSIS 3.0 (8x4) modem that provides all of the testing power needed to ensure HFC networks operate to high standards. This includes balancing of the distribution system, maintaining analog and digital signal quality and controlling return path ingress. Standard Testing Features: 6 MHz Channel Spacing, Return Spectrum Analysis (4 to 65 MHz), Forward Spectrum Analysis (4 to 1000 MHz), Level Measurement, C/N Measurement, QAM Measurement (Level/MER/BER), Channel Plan Scan with Tilt Measurement, Ping, Trace Route, VoIP, Throughput, Cable Modem Statistics, Analog HUM, Depth of Modulation, CSO/CTB, FM Deviation, Sweepless Sweep, Line Viewer and QAM Source. Standard Communication Features: RF Test Port (F-Type, Replaceable), US DOCSIS 3.0 Modem 8x4 (100/304 MBPS), RJ45 Electrical Ethernet Port (10/100MBPS), CM to RJ-45 Mode. The complete kit includes: 860 DSPi Meter, Protective Carrying Case, Shoulder Strap, US AC Power Cable and AC to DC Power Adapter & Battery Charger. Configured with: Power Pack (PP-1), Return Tester RSVP (VP-1), Spectrum Analyzer (SA-1), Vestigial Side Band Modulation (VSB), Forward Sweep (FS-1) and Return Transmitter Board (RTB) Options
860 DSPi Field Analyzer

860 DSPi - US (PP-1, SR-1, VP-1, SA-1, VSB, FS-1 & RTB)

Configured with options

The 860 DSPi is a handheld spectrum analyzer with US DOCSIS 3.0 (8x4) modem that provides all of the testing power needed to ensure HFC networks operate to high standards. This includes balancing of the distribution system, maintaining analog and digital signal quality and controlling return path ingress. Standard Testing Features: 6 MHz Channel Spacing, Return Spectrum Analysis (4 to 65 MHz), Forward Spectrum Analysis (4 to 1000 MHz), Level Measurement, C/N Measurement, QAM Measurement (Level/MER/BER), Channel Plan Scan with Tilt Measurement, Ping, Trace Route, VoIP, Throughput, Cable Modem Statistics, Analog HUM, Depth of Modulation, CSO/CTB, FM Deviation, Sweepless Sweep, Line Viewer and QAM Source. Standard Communication Features: RF Test Port (F-Type, Replaceable), US DOCSIS 3.0 Modem 8x4 (100/304 MBPS), RJ45 Electrical Ethernet Port (10/100MBPS), CM to RJ-45 Mode. The complete kit includes: 860 DSPi Meter, Protective Carrying Case, Shoulder Strap, US AC Power Cable and AC to DC Power Adapter & Battery Charger. Configured with: Power Pack (PP-1), Return Sweep Receiver (SR-1), Return Tester RSVP (VP-1), Spectrum Analyzer (SA-1), Vestigial Side Band Modulation (VSB), Forward Sweep (FS-1) and Return Transmitter Board (RTB) Options
860 DSPi Field Analyzer

860 DSPi - US (PP-1, QA-2, VSB & FS-1)

Configured with options

The 860 DSPi is a handheld spectrum analyzer with US DOCSIS 3.0 (8x4) modem that provides all of the testing power needed to ensure HFC networks operate to high standards. This includes balancing of the distribution system, maintaining analog and digital signal quality and controlling return path ingress. Standard Testing Features: 6 MHz Channel Spacing, Return Spectrum Analysis (4 to 65 MHz), Forward Spectrum Analysis (4 to 1000 MHz), Level Measurement, C/N Measurement, QAM Measurement (Level/MER/BER), Channel Plan Scan with Tilt Measurement, Ping, Trace Route, VoIP, Throughput, Cable Modem Statistics, Analog HUM, Depth of Modulation, CSO/CTB, FM Deviation, Sweepless Sweep, Line Viewer and QAM Source. Standard Communication Features: RF Test Port (F-Type, Replaceable), US DOCSIS 3.0 Modem 8x4 (100/304 MBPS), RJ45 Electrical Ethernet Port (10/100MBPS), CM to RJ-45 Mode. The complete kit includes: 860 DSPi Meter, Protective Carrying Case, Shoulder Strap, US AC Power Cable and AC to DC Power Adapter & Battery Charger. Configured with: Power Pack (PP-1), QAM (QA-2), Vestigial Side Band Modulation (VSB) and Forward Sweep (FS-1) Options
860 DSPi Field Analyzer

860 DSPi - US (PP-1, SR-1, QA-2, VSB, FS-1 & RTB)

Configured with options

The 860 DSPi is a handheld spectrum analyzer with US DOCSIS 3.0 (8x4) modem that provides all of the testing power needed to ensure HFC networks operate to high standards. This includes balancing of the distribution system, maintaining analog and digital signal quality and controlling return path ingress. Standard Testing Features: 6 MHz Channel Spacing, Return Spectrum Analysis (4 to 65 MHz), Forward Spectrum Analysis (4 to 1000 MHz), Level Measurement, C/N Measurement, QAM Measurement (Level/MER/BER), Channel Plan Scan with Tilt Measurement, Ping, Trace Route, VoIP, Throughput, Cable Modem Statistics, Analog HUM, Depth of Modulation, CSO/CTB, FM Deviation, Sweepless Sweep, Line Viewer and QAM Source. Standard Communication Features: RF Test Port (F-Type, Replaceable), US DOCSIS 3.0 Modem 8x4 (100/304 MBPS), RJ45 Electrical Ethernet Port (10/100MBPS), CM to RJ-45 Mode. The complete kit includes: 860 DSPi Meter, Protective Carrying Case, Shoulder Strap, US AC Power Cable and AC to DC Power Adapter & Battery Charger. Configured with: Power Pack (PP-1), Return Sweep Receiver (SR-1), QAM (QA-2), Vestigial Side Band Modulation (VSB), Forward Sweep (FS-1) and Return Transmitter Board (RTB) Options
860 DSPi Field Analyzer

860 DSPi - US (PP-1, VP-1, QA-2, VSB, FS-1 & RTB)

Configured with options

The 860 DSPi is a handheld spectrum analyzer with US DOCSIS 3.0 (8x4) modem that provides all of the testing power needed to ensure HFC networks operate to high standards. This includes balancing of the distribution system, maintaining analog and digital signal quality and controlling return path ingress. Standard Testing Features: 6 MHz Channel Spacing, Return Spectrum Analysis (4 to 65 MHz), Forward Spectrum Analysis (4 to 1000 MHz), Level Measurement, C/N Measurement, QAM Measurement (Level/MER/BER), Channel Plan Scan with Tilt Measurement, Ping, Trace Route, VoIP, Throughput, Cable Modem Statistics, Analog HUM, Depth of Modulation, CSO/CTB, FM Deviation, Sweepless Sweep, Line Viewer and QAM Source. Standard Communication Features: RF Test Port (F-Type, Replaceable), US DOCSIS 3.0 Modem 8x4 (100/304 MBPS), RJ45 Electrical Ethernet Port (10/100MBPS), CM to RJ-45 Mode. The complete kit includes: 860 DSPi Meter, Protective Carrying Case, Shoulder Strap, US AC Power Cable and AC to DC Power Adapter & Battery Charger. Configured with: Power Pack (PP-1), Return Tester RSVP (VP-1), QAM (QA-2), Vestigial Side Band Modulation (VSB), Forward Sweep (FS-1) and Return Transmitter Board (RTB) Options
860 DSPi Field Analyzer

860 DSPi - US (PP-1, SR-1, VP-1, QA-2, VSB, FS-1 & RTB)

Configured with options

The 860 DSPi is a handheld spectrum analyzer with US DOCSIS 3.0 (8x4) modem that provides all of the testing power needed to ensure HFC networks operate to high standards. This includes balancing of the distribution system, maintaining analog and digital signal quality and controlling return path ingress. Standard Testing Features: 6 MHz Channel Spacing, Return Spectrum Analysis (4 to 65 MHz), Forward Spectrum Analysis (4 to 1000 MHz), Level Measurement, C/N Measurement, QAM Measurement (Level/MER/BER), Channel Plan Scan with Tilt Measurement, Ping, Trace Route, VoIP, Throughput, Cable Modem Statistics, Analog HUM, Depth of Modulation, CSO/CTB, FM Deviation, Sweepless Sweep, Line Viewer and QAM Source. Standard Communication Features: RF Test Port (F-Type, Replaceable), US DOCSIS 3.0 Modem 8x4 (100/304 MBPS), RJ45 Electrical Ethernet Port (10/100MBPS), CM to RJ-45 Mode. The complete kit includes: 860 DSPi Meter, Protective Carrying Case, Shoulder Strap, US AC Power Cable and AC to DC Power Adapter & Battery Charger. Configured with: Power Pack (PP-1), Return Sweep Receiver (SR-1), Return Tester RSVP (VP-1), QAM (QA-2), Vestigial Side Band Modulation (VSB), Forward Sweep (FS-1) and Return Transmitter Board (RTB) Options
860 DSPi Field Analyzer

860 DSPi - US (PP-1, SA-1, QA-2, VSB & FS-1)

Configured with options

The 860 DSPi is a handheld spectrum analyzer with US DOCSIS 3.0 (8x4) modem that provides all of the testing power needed to ensure HFC networks operate to high standards. This includes balancing of the distribution system, maintaining analog and digital signal quality and controlling return path ingress. Standard Testing Features: 6 MHz Channel Spacing, Return Spectrum Analysis (4 to 65 MHz), Forward Spectrum Analysis (4 to 1000 MHz), Level Measurement, C/N Measurement, QAM Measurement (Level/MER/BER), Channel Plan Scan with Tilt Measurement, Ping, Trace Route, VoIP, Throughput, Cable Modem Statistics, Analog HUM, Depth of Modulation, CSO/CTB, FM Deviation, Sweepless Sweep, Line Viewer and QAM Source. Standard Communication Features: RF Test Port (F-Type, Replaceable), US DOCSIS 3.0 Modem 8x4 (100/304 MBPS), RJ45 Electrical Ethernet Port (10/100MBPS), CM to RJ-45 Mode. The complete kit includes: 860 DSPi Meter, Protective Carrying Case, Shoulder Strap, US AC Power Cable and AC to DC Power Adapter & Battery Charger. Configured with: Power Pack (PP-1), Spectrum Analyzer (SA-1), QAM (QA-2), Vestigial Side Band Modulation (VSB) and Forward Sweep (FS-1) Options
860 DSPi Field Analyzer

860 DSPi - US (PP-1, SR-1, SA-1, QA-2, VSB, FS-1 & RTB)

Configured with options

The 860 DSPi is a handheld spectrum analyzer with US DOCSIS 3.0 (8x4) modem that provides all of the testing power needed to ensure HFC networks operate to high standards. This includes balancing of the distribution system, maintaining analog and digital signal quality and controlling return path ingress. Standard Testing Features: 6 MHz Channel Spacing, Return Spectrum Analysis (4 to 65 MHz), Forward Spectrum Analysis (4 to 1000 MHz), Level Measurement, C/N Measurement, QAM Measurement (Level/MER/BER), Channel Plan Scan with Tilt Measurement, Ping, Trace Route, VoIP, Throughput, Cable Modem Statistics, Analog HUM, Depth of Modulation, CSO/CTB, FM Deviation, Sweepless Sweep, Line Viewer and QAM Source. Standard Communication Features: RF Test Port (F-Type, Replaceable), US DOCSIS 3.0 Modem 8x4 (100/304 MBPS), RJ45 Electrical Ethernet Port (10/100MBPS), CM to RJ-45 Mode. The complete kit includes: 860 DSPi Meter, Protective Carrying Case, Shoulder Strap, US AC Power Cable and AC to DC Power Adapter & Battery Charger. Configured with: Power Pack (PP-1), Return Sweep Receiver (SR-1), Spectrum Analyzer (SA-1), QAM (QA-2), Vestigial Side Band Modulation (VSB), Forward Sweep (FS-1) and Return Transmitter Board (RTB) Options
860 DSPi Field Analyzer

860 DSPi - US (PP-1, VP-1, SA-1, QA-2, VSB, FS-1 & RTB)

Configured with options

The 860 DSPi is a handheld spectrum analyzer with US DOCSIS 3.0 (8x4) modem that provides all of the testing power needed to ensure HFC networks operate to high standards. This includes balancing of the distribution system, maintaining analog and digital signal quality and controlling return path ingress. Standard Testing Features: 6 MHz Channel Spacing, Return Spectrum Analysis (4 to 65 MHz), Forward Spectrum Analysis (4 to 1000 MHz), Level Measurement, C/N Measurement, QAM Measurement (Level/MER/BER), Channel Plan Scan with Tilt Measurement, Ping, Trace Route, VoIP, Throughput, Cable Modem Statistics, Analog HUM, Depth of Modulation, CSO/CTB, FM Deviation, Sweepless Sweep, Line Viewer and QAM Source. Standard Communication Features: RF Test Port (F-Type, Replaceable), US DOCSIS 3.0 Modem 8x4 (100/304 MBPS), RJ45 Electrical Ethernet Port (10/100MBPS), CM to RJ-45 Mode. The complete kit includes: 860 DSPi Meter, Protective Carrying Case, Shoulder Strap, US AC Power Cable and AC to DC Power Adapter & Battery Charger. Configured with: Power Pack (PP-1), Return Tester RSVP (VP-1), Spectrum Analyzer (SA-1), QAM (QA-2), Vestigial Side Band Modulation (VSB), Forward Sweep (FS-1) and Return Transmitter Board (RTB) Options
860 DSPi Field Analyzer

860 DSPi - US (PP-1, SR-1, VP-1, SA-1, QA-2, VSB, FS-1 & RTB)

Configured with options

The 860 DSPi is a handheld spectrum analyzer with US DOCSIS 3.0 (8x4) modem that provides all of the testing power needed to ensure HFC networks operate to high standards. This includes balancing of the distribution system, maintaining analog and digital signal quality and controlling return path ingress. Standard Testing Features: 6 MHz Channel Spacing, Return Spectrum Analysis (4 to 65 MHz), Forward Spectrum Analysis (4 to 1000 MHz), Level Measurement, C/N Measurement, QAM Measurement (Level/MER/BER), Channel Plan Scan with Tilt Measurement, Ping, Trace Route, VoIP, Throughput, Cable Modem Statistics, Analog HUM, Depth of Modulation, CSO/CTB, FM Deviation, Sweepless Sweep, Line Viewer and QAM Source. Standard Communication Features: RF Test Port (F-Type, Replaceable), US DOCSIS 3.0 Modem 8x4 (100/304 MBPS), RJ45 Electrical Ethernet Port (10/100MBPS), CM to RJ-45 Mode. The complete kit includes: 860 DSPi Meter, Protective Carrying Case, Shoulder Strap, US AC Power Cable and AC to DC Power Adapter & Battery Charger. Configured with: Power Pack (PP-1), Return Sweep Receiver (SR-1), Return Tester RSVP (VP-1), Spectrum Analyzer (SA-1), QAM (QA-2), Vestigial Side Band Modulation (VSB), Forward Sweep (FS-1) and Return Transmitter Board (RTB) Options
860 DSPi Field Analyzer

860 DSPi - US (PP-1 & VITS)

Configured with options

The 860 DSPi is a handheld spectrum analyzer with US DOCSIS 3.0 (8x4) modem that provides all of the testing power needed to ensure HFC networks operate to high standards. This includes balancing of the distribution system, maintaining analog and digital signal quality and controlling return path ingress. Standard Testing Features: 6 MHz Channel Spacing, Return Spectrum Analysis (4 to 65 MHz), Forward Spectrum Analysis (4 to 1000 MHz), Level Measurement, C/N Measurement, QAM Measurement (Level/MER/BER), Channel Plan Scan with Tilt Measurement, Ping, Trace Route, VoIP, Throughput, Cable Modem Statistics, Analog HUM, Depth of Modulation, CSO/CTB, FM Deviation, Sweepless Sweep, Line Viewer and QAM Source. Standard Communication Features: RF Test Port (F-Type, Replaceable), US DOCSIS 3.0 Modem 8x4 (100/304 MBPS), RJ45 Electrical Ethernet Port (10/100MBPS), CM to RJ-45 Mode. The complete kit includes: 860 DSPi Meter, Protective Carrying Case, Shoulder Strap, US AC Power Cable and AC to DC Power Adapter & Battery Charger. Configured with: Power Pack (PP-1) and Vertical Interval Test Signals (VITS) Options
860 DSPi Field Analyzer

860 DSPi - US (PP-1, SR-1, VITS & RTB)

Configured with options

The 860 DSPi is a handheld spectrum analyzer with US DOCSIS 3.0 (8x4) modem that provides all of the testing power needed to ensure HFC networks operate to high standards. This includes balancing of the distribution system, maintaining analog and digital signal quality and controlling return path ingress. Standard Testing Features: 6 MHz Channel Spacing, Return Spectrum Analysis (4 to 65 MHz), Forward Spectrum Analysis (4 to 1000 MHz), Level Measurement, C/N Measurement, QAM Measurement (Level/MER/BER), Channel Plan Scan with Tilt Measurement, Ping, Trace Route, VoIP, Throughput, Cable Modem Statistics, Analog HUM, Depth of Modulation, CSO/CTB, FM Deviation, Sweepless Sweep, Line Viewer and QAM Source. Standard Communication Features: RF Test Port (F-Type, Replaceable), US DOCSIS 3.0 Modem 8x4 (100/304 MBPS), RJ45 Electrical Ethernet Port (10/100MBPS), CM to RJ-45 Mode. The complete kit includes: 860 DSPi Meter, Protective Carrying Case, Shoulder Strap, US AC Power Cable and AC to DC Power Adapter & Battery Charger. Configured with: Power Pack (PP-1), Return Sweep Receiver (SR-1), Vertical Interval Test Signals (VITS) and Return Transmitter Board (RTB) Options
860 DSPi Field Analyzer

860 DSPi - US (PP-1, VP-1, VITS & RTB)

Configured with options

The 860 DSPi is a handheld spectrum analyzer with US DOCSIS 3.0 (8x4) modem that provides all of the testing power needed to ensure HFC networks operate to high standards. This includes balancing of the distribution system, maintaining analog and digital signal quality and controlling return path ingress. Standard Testing Features: 6 MHz Channel Spacing, Return Spectrum Analysis (4 to 65 MHz), Forward Spectrum Analysis (4 to 1000 MHz), Level Measurement, C/N Measurement, QAM Measurement (Level/MER/BER), Channel Plan Scan with Tilt Measurement, Ping, Trace Route, VoIP, Throughput, Cable Modem Statistics, Analog HUM, Depth of Modulation, CSO/CTB, FM Deviation, Sweepless Sweep, Line Viewer and QAM Source. Standard Communication Features: RF Test Port (F-Type, Replaceable), US DOCSIS 3.0 Modem 8x4 (100/304 MBPS), RJ45 Electrical Ethernet Port (10/100MBPS), CM to RJ-45 Mode. The complete kit includes: 860 DSPi Meter, Protective Carrying Case, Shoulder Strap, US AC Power Cable and AC to DC Power Adapter & Battery Charger. Configured with: Power Pack (PP-1), Return Tester RSVP (VP-1), Vertical Interval Test Signals (VITS) and Return Transmitter Board (RTB) Options
860 DSPi Field Analyzer

860 DSPi - US (PP-1, SR-1, VP-1, VITS & RTB)

Configured with options

The 860 DSPi is a handheld spectrum analyzer with US DOCSIS 3.0 (8x4) modem that provides all of the testing power needed to ensure HFC networks operate to high standards. This includes balancing of the distribution system, maintaining analog and digital signal quality and controlling return path ingress. Standard Testing Features: 6 MHz Channel Spacing, Return Spectrum Analysis (4 to 65 MHz), Forward Spectrum Analysis (4 to 1000 MHz), Level Measurement, C/N Measurement, QAM Measurement (Level/MER/BER), Channel Plan Scan with Tilt Measurement, Ping, Trace Route, VoIP, Throughput, Cable Modem Statistics, Analog HUM, Depth of Modulation, CSO/CTB, FM Deviation, Sweepless Sweep, Line Viewer and QAM Source. Standard Communication Features: RF Test Port (F-Type, Replaceable), US DOCSIS 3.0 Modem 8x4 (100/304 MBPS), RJ45 Electrical Ethernet Port (10/100MBPS), CM to RJ-45 Mode. The complete kit includes: 860 DSPi Meter, Protective Carrying Case, Shoulder Strap, US AC Power Cable and AC to DC Power Adapter & Battery Charger. Configured with: Power Pack (PP-1), Return Sweep Receiver (SR-1), Return Tester RSVP (VP-1), Vertical Interval Test Signals (VITS) and Return Transmitter Board (RTB) Options
860 DSPi Field Analyzer

860 DSPi - US (PP-1, SA-1 & VITS)

Configured with options

The 860 DSPi is a handheld spectrum analyzer with US DOCSIS 3.0 (8x4) modem that provides all of the testing power needed to ensure HFC networks operate to high standards. This includes balancing of the distribution system, maintaining analog and digital signal quality and controlling return path ingress. Standard Testing Features: 6 MHz Channel Spacing, Return Spectrum Analysis (4 to 65 MHz), Forward Spectrum Analysis (4 to 1000 MHz), Level Measurement, C/N Measurement, QAM Measurement (Level/MER/BER), Channel Plan Scan with Tilt Measurement, Ping, Trace Route, VoIP, Throughput, Cable Modem Statistics, Analog HUM, Depth of Modulation, CSO/CTB, FM Deviation, Sweepless Sweep, Line Viewer and QAM Source. Standard Communication Features: RF Test Port (F-Type, Replaceable), US DOCSIS 3.0 Modem 8x4 (100/304 MBPS), RJ45 Electrical Ethernet Port (10/100MBPS), CM to RJ-45 Mode. The complete kit includes: 860 DSPi Meter, Protective Carrying Case, Shoulder Strap, US AC Power Cable and AC to DC Power Adapter & Battery Charger. Configured with: Power Pack (PP-1), Spectrum Analyzer (SA-1) and Vertical Interval Test Signals (VITS) Options
860 DSPi Field Analyzer

860 DSPi - US (PP-1, SR-1, SA-1, VITS & RTB)

Configured with options

The 860 DSPi is a handheld spectrum analyzer with US DOCSIS 3.0 (8x4) modem that provides all of the testing power needed to ensure HFC networks operate to high standards. This includes balancing of the distribution system, maintaining analog and digital signal quality and controlling return path ingress. Standard Testing Features: 6 MHz Channel Spacing, Return Spectrum Analysis (4 to 65 MHz), Forward Spectrum Analysis (4 to 1000 MHz), Level Measurement, C/N Measurement, QAM Measurement (Level/MER/BER), Channel Plan Scan with Tilt Measurement, Ping, Trace Route, VoIP, Throughput, Cable Modem Statistics, Analog HUM, Depth of Modulation, CSO/CTB, FM Deviation, Sweepless Sweep, Line Viewer and QAM Source. Standard Communication Features: RF Test Port (F-Type, Replaceable), US DOCSIS 3.0 Modem 8x4 (100/304 MBPS), RJ45 Electrical Ethernet Port (10/100MBPS), CM to RJ-45 Mode. The complete kit includes: 860 DSPi Meter, Protective Carrying Case, Shoulder Strap, US AC Power Cable and AC to DC Power Adapter & Battery Charger. Configured with: Power Pack (PP-1), Return Sweep Receiver (SR-1), Spectrum Analyzer (SA-1), Vertical Interval Test Signals (VITS) and Return Transmitter Board (RTB) Options
860 DSPi Field Analyzer

860 DSPi - US (PP-1, VP-1, SA-1, VITS & RTB)

Configured with options

The 860 DSPi is a handheld spectrum analyzer with US DOCSIS 3.0 (8x4) modem that provides all of the testing power needed to ensure HFC networks operate to high standards. This includes balancing of the distribution system, maintaining analog and digital signal quality and controlling return path ingress. Standard Testing Features: 6 MHz Channel Spacing, Return Spectrum Analysis (4 to 65 MHz), Forward Spectrum Analysis (4 to 1000 MHz), Level Measurement, C/N Measurement, QAM Measurement (Level/MER/BER), Channel Plan Scan with Tilt Measurement, Ping, Trace Route, VoIP, Throughput, Cable Modem Statistics, Analog HUM, Depth of Modulation, CSO/CTB, FM Deviation, Sweepless Sweep, Line Viewer and QAM Source. Standard Communication Features: RF Test Port (F-Type, Replaceable), US DOCSIS 3.0 Modem 8x4 (100/304 MBPS), RJ45 Electrical Ethernet Port (10/100MBPS), CM to RJ-45 Mode. The complete kit includes: 860 DSPi Meter, Protective Carrying Case, Shoulder Strap, US AC Power Cable and AC to DC Power Adapter & Battery Charger. Configured with: Power Pack (PP-1), Return Tester RSVP (VP-1), Spectrum Analyzer (SA-1), Vertical Interval Test Signals (VITS) and Return Transmitter Board (RTB) Options
860 DSPi Field Analyzer

860 DSPi - US (PP-1, SR-1, VP-1, SA-1, VITS & RTB)

Configured with options

The 860 DSPi is a handheld spectrum analyzer with US DOCSIS 3.0 (8x4) modem that provides all of the testing power needed to ensure HFC networks operate to high standards. This includes balancing of the distribution system, maintaining analog and digital signal quality and controlling return path ingress. Standard Testing Features: 6 MHz Channel Spacing, Return Spectrum Analysis (4 to 65 MHz), Forward Spectrum Analysis (4 to 1000 MHz), Level Measurement, C/N Measurement, QAM Measurement (Level/MER/BER), Channel Plan Scan with Tilt Measurement, Ping, Trace Route, VoIP, Throughput, Cable Modem Statistics, Analog HUM, Depth of Modulation, CSO/CTB, FM Deviation, Sweepless Sweep, Line Viewer and QAM Source. Standard Communication Features: RF Test Port (F-Type, Replaceable), US DOCSIS 3.0 Modem 8x4 (100/304 MBPS), RJ45 Electrical Ethernet Port (10/100MBPS), CM to RJ-45 Mode. The complete kit includes: 860 DSPi Meter, Protective Carrying Case, Shoulder Strap, US AC Power Cable and AC to DC Power Adapter & Battery Charger. Configured with: Power Pack (PP-1), Return Sweep Receiver (SR-1), Return Tester RSVP (VP-1), Spectrum Analyzer (SA-1), Vertical Interval Test Signals (VITS) and Return Transmitter Board (RTB) Options
860 DSPi Field Analyzer

860 DSPi - US (PP-1, QA-2 & VITS)

Configured with options

The 860 DSPi is a handheld spectrum analyzer with US DOCSIS 3.0 (8x4) modem that provides all of the testing power needed to ensure HFC networks operate to high standards. This includes balancing of the distribution system, maintaining analog and digital signal quality and controlling return path ingress. Standard Testing Features: 6 MHz Channel Spacing, Return Spectrum Analysis (4 to 65 MHz), Forward Spectrum Analysis (4 to 1000 MHz), Level Measurement, C/N Measurement, QAM Measurement (Level/MER/BER), Channel Plan Scan with Tilt Measurement, Ping, Trace Route, VoIP, Throughput, Cable Modem Statistics, Analog HUM, Depth of Modulation, CSO/CTB, FM Deviation, Sweepless Sweep, Line Viewer and QAM Source. Standard Communication Features: RF Test Port (F-Type, Replaceable), US DOCSIS 3.0 Modem 8x4 (100/304 MBPS), RJ45 Electrical Ethernet Port (10/100MBPS), CM to RJ-45 Mode. The complete kit includes: 860 DSPi Meter, Protective Carrying Case, Shoulder Strap, US AC Power Cable and AC to DC Power Adapter & Battery Charger. Configured with: Power Pack (PP-1), QAM (QA-2) and Vertical Interval Test Signals (VITS) Options
860 DSPi Field Analyzer

860 DSPi - US (PP-1, SR-1, QA-2, VITS & RTB)

Configured with options

The 860 DSPi is a handheld spectrum analyzer with US DOCSIS 3.0 (8x4) modem that provides all of the testing power needed to ensure HFC networks operate to high standards. This includes balancing of the distribution system, maintaining analog and digital signal quality and controlling return path ingress. Standard Testing Features: 6 MHz Channel Spacing, Return Spectrum Analysis (4 to 65 MHz), Forward Spectrum Analysis (4 to 1000 MHz), Level Measurement, C/N Measurement, QAM Measurement (Level/MER/BER), Channel Plan Scan with Tilt Measurement, Ping, Trace Route, VoIP, Throughput, Cable Modem Statistics, Analog HUM, Depth of Modulation, CSO/CTB, FM Deviation, Sweepless Sweep, Line Viewer and QAM Source. Standard Communication Features: RF Test Port (F-Type, Replaceable), US DOCSIS 3.0 Modem 8x4 (100/304 MBPS), RJ45 Electrical Ethernet Port (10/100MBPS), CM to RJ-45 Mode. The complete kit includes: 860 DSPi Meter, Protective Carrying Case, Shoulder Strap, US AC Power Cable and AC to DC Power Adapter & Battery Charger. Configured with: Power Pack (PP-1), Return Sweep Receiver (SR-1), QAM (QA-2), Vertical Interval Test Signals (VITS) and Return Transmitter Board (RTB) Options
860 DSPi Field Analyzer

860 DSPi - US (PP-1, VP-1, QA-2, VITS & RTB)

Configured with options

The 860 DSPi is a handheld spectrum analyzer with US DOCSIS 3.0 (8x4) modem that provides all of the testing power needed to ensure HFC networks operate to high standards. This includes balancing of the distribution system, maintaining analog and digital signal quality and controlling return path ingress. Standard Testing Features: 6 MHz Channel Spacing, Return Spectrum Analysis (4 to 65 MHz), Forward Spectrum Analysis (4 to 1000 MHz), Level Measurement, C/N Measurement, QAM Measurement (Level/MER/BER), Channel Plan Scan with Tilt Measurement, Ping, Trace Route, VoIP, Throughput, Cable Modem Statistics, Analog HUM, Depth of Modulation, CSO/CTB, FM Deviation, Sweepless Sweep, Line Viewer and QAM Source. Standard Communication Features: RF Test Port (F-Type, Replaceable), US DOCSIS 3.0 Modem 8x4 (100/304 MBPS), RJ45 Electrical Ethernet Port (10/100MBPS), CM to RJ-45 Mode. The complete kit includes: 860 DSPi Meter, Protective Carrying Case, Shoulder Strap, US AC Power Cable and AC to DC Power Adapter & Battery Charger. Configured with: Power Pack (PP-1), Return Tester RSVP (VP-1), QAM (QA-2), Vertical Interval Test Signals (VITS) and Return Transmitter Board (RTB) Options
860 DSPi Field Analyzer

860 DSPi - US (PP-1, SR-1, VP-1, QA-2, VITS & RTB)

Configured with options

The 860 DSPi is a handheld spectrum analyzer with US DOCSIS 3.0 (8x4) modem that provides all of the testing power needed to ensure HFC networks operate to high standards. This includes balancing of the distribution system, maintaining analog and digital signal quality and controlling return path ingress. Standard Testing Features: 6 MHz Channel Spacing, Return Spectrum Analysis (4 to 65 MHz), Forward Spectrum Analysis (4 to 1000 MHz), Level Measurement, C/N Measurement, QAM Measurement (Level/MER/BER), Channel Plan Scan with Tilt Measurement, Ping, Trace Route, VoIP, Throughput, Cable Modem Statistics, Analog HUM, Depth of Modulation, CSO/CTB, FM Deviation, Sweepless Sweep, Line Viewer and QAM Source. Standard Communication Features: RF Test Port (F-Type, Replaceable), US DOCSIS 3.0 Modem 8x4 (100/304 MBPS), RJ45 Electrical Ethernet Port (10/100MBPS), CM to RJ-45 Mode. The complete kit includes: 860 DSPi Meter, Protective Carrying Case, Shoulder Strap, US AC Power Cable and AC to DC Power Adapter & Battery Charger. Configured with: Power Pack (PP-1), Return Sweep Receiver (SR-1), Return Tester RSVP (VP-1), QAM (QA-2), Vertical Interval Test Signals (VITS) and Return Transmitter Board (RTB) Options
860 DSPi Field Analyzer

860 DSPi - US (PP-1, SA-1, QA-2 & VITS)

Configured with options

The 860 DSPi is a handheld spectrum analyzer with US DOCSIS 3.0 (8x4) modem that provides all of the testing power needed to ensure HFC networks operate to high standards. This includes balancing of the distribution system, maintaining analog and digital signal quality and controlling return path ingress. Standard Testing Features: 6 MHz Channel Spacing, Return Spectrum Analysis (4 to 65 MHz), Forward Spectrum Analysis (4 to 1000 MHz), Level Measurement, C/N Measurement, QAM Measurement (Level/MER/BER), Channel Plan Scan with Tilt Measurement, Ping, Trace Route, VoIP, Throughput, Cable Modem Statistics, Analog HUM, Depth of Modulation, CSO/CTB, FM Deviation, Sweepless Sweep, Line Viewer and QAM Source. Standard Communication Features: RF Test Port (F-Type, Replaceable), US DOCSIS 3.0 Modem 8x4 (100/304 MBPS), RJ45 Electrical Ethernet Port (10/100MBPS), CM to RJ-45 Mode. The complete kit includes: 860 DSPi Meter, Protective Carrying Case, Shoulder Strap, US AC Power Cable and AC to DC Power Adapter & Battery Charger. Configured with: Power Pack (PP-1), Spectrum Analyzer (SA-1), QAM (QA-2) and Vertical Interval Test Signals (VITS) Options
860 DSPi Field Analyzer

860 DSPi - US (PP-1, SR-1, SA-1, QA-2, VITS & RTB)

Configured with options

The 860 DSPi is a handheld spectrum analyzer with US DOCSIS 3.0 (8x4) modem that provides all of the testing power needed to ensure HFC networks operate to high standards. This includes balancing of the distribution system, maintaining analog and digital signal quality and controlling return path ingress. Standard Testing Features: 6 MHz Channel Spacing, Return Spectrum Analysis (4 to 65 MHz), Forward Spectrum Analysis (4 to 1000 MHz), Level Measurement, C/N Measurement, QAM Measurement (Level/MER/BER), Channel Plan Scan with Tilt Measurement, Ping, Trace Route, VoIP, Throughput, Cable Modem Statistics, Analog HUM, Depth of Modulation, CSO/CTB, FM Deviation, Sweepless Sweep, Line Viewer and QAM Source. Standard Communication Features: RF Test Port (F-Type, Replaceable), US DOCSIS 3.0 Modem 8x4 (100/304 MBPS), RJ45 Electrical Ethernet Port (10/100MBPS), CM to RJ-45 Mode. The complete kit includes: 860 DSPi Meter, Protective Carrying Case, Shoulder Strap, US AC Power Cable and AC to DC Power Adapter & Battery Charger. Configured with: Power Pack (PP-1), Return Sweep Receiver (SR-1), Spectrum Analyzer (SA-1), QAM (QA-2), Vertical Interval Test Signals (VITS) and Return Transmitter Board (RTB) Options
860 DSPi Field Analyzer

860 DSPi - US (PP-1, VP-1, SA-1, QA-2, VITS & RTB)

Configured with options

The 860 DSPi is a handheld spectrum analyzer with US DOCSIS 3.0 (8x4) modem that provides all of the testing power needed to ensure HFC networks operate to high standards. This includes balancing of the distribution system, maintaining analog and digital signal quality and controlling return path ingress. Standard Testing Features: 6 MHz Channel Spacing, Return Spectrum Analysis (4 to 65 MHz), Forward Spectrum Analysis (4 to 1000 MHz), Level Measurement, C/N Measurement, QAM Measurement (Level/MER/BER), Channel Plan Scan with Tilt Measurement, Ping, Trace Route, VoIP, Throughput, Cable Modem Statistics, Analog HUM, Depth of Modulation, CSO/CTB, FM Deviation, Sweepless Sweep, Line Viewer and QAM Source. Standard Communication Features: RF Test Port (F-Type, Replaceable), US DOCSIS 3.0 Modem 8x4 (100/304 MBPS), RJ45 Electrical Ethernet Port (10/100MBPS), CM to RJ-45 Mode. The complete kit includes: 860 DSPi Meter, Protective Carrying Case, Shoulder Strap, US AC Power Cable and AC to DC Power Adapter & Battery Charger. Configured with: Power Pack (PP-1), Return Tester RSVP (VP-1), Spectrum Analyzer (SA-1), QAM (QA-2), Vertical Interval Test Signals (VITS) and Return Transmitter Board (RTB) Options
860 DSPi Field Analyzer

860 DSPi - US (PP-1, SR-1, VP-1, SA-1, QA-2, VITS & RTB)

Configured with options

The 860 DSPi is a handheld spectrum analyzer with US DOCSIS 3.0 (8x4) modem that provides all of the testing power needed to ensure HFC networks operate to high standards. This includes balancing of the distribution system, maintaining analog and digital signal quality and controlling return path ingress. Standard Testing Features: 6 MHz Channel Spacing, Return Spectrum Analysis (4 to 65 MHz), Forward Spectrum Analysis (4 to 1000 MHz), Level Measurement, C/N Measurement, QAM Measurement (Level/MER/BER), Channel Plan Scan with Tilt Measurement, Ping, Trace Route, VoIP, Throughput, Cable Modem Statistics, Analog HUM, Depth of Modulation, CSO/CTB, FM Deviation, Sweepless Sweep, Line Viewer and QAM Source. Standard Communication Features: RF Test Port (F-Type, Replaceable), US DOCSIS 3.0 Modem 8x4 (100/304 MBPS), RJ45 Electrical Ethernet Port (10/100MBPS), CM to RJ-45 Mode. The complete kit includes: 860 DSPi Meter, Protective Carrying Case, Shoulder Strap, US AC Power Cable and AC to DC Power Adapter & Battery Charger. Configured with: Power Pack (PP-1), Return Sweep Receiver (SR-1), Return Tester RSVP (VP-1), Spectrum Analyzer (SA-1), QAM (QA-2), Vertical Interval Test Signals (VITS) and Return Transmitter Board (RTB) Options
860 DSPi Field Analyzer

860 DSPi - US (PP-1, VSB & VITS)

Configured with options

The 860 DSPi is a handheld spectrum analyzer with US DOCSIS 3.0 (8x4) modem that provides all of the testing power needed to ensure HFC networks operate to high standards. This includes balancing of the distribution system, maintaining analog and digital signal quality and controlling return path ingress. Standard Testing Features: 6 MHz Channel Spacing, Return Spectrum Analysis (4 to 65 MHz), Forward Spectrum Analysis (4 to 1000 MHz), Level Measurement, C/N Measurement, QAM Measurement (Level/MER/BER), Channel Plan Scan with Tilt Measurement, Ping, Trace Route, VoIP, Throughput, Cable Modem Statistics, Analog HUM, Depth of Modulation, CSO/CTB, FM Deviation, Sweepless Sweep, Line Viewer and QAM Source. Standard Communication Features: RF Test Port (F-Type, Replaceable), US DOCSIS 3.0 Modem 8x4 (100/304 MBPS), RJ45 Electrical Ethernet Port (10/100MBPS), CM to RJ-45 Mode. The complete kit includes: 860 DSPi Meter, Protective Carrying Case, Shoulder Strap, US AC Power Cable and AC to DC Power Adapter & Battery Charger. Configured with: Power Pack (PP-1), Vestigial Side Band Modulation (VSB) and Vertical Interval Test Signals (VITS) Options
860 DSPi Field Analyzer

860 DSPi - US (PP-1, SR-1, VSB, VITS & RTB)

Configured with options

The 860 DSPi is a handheld spectrum analyzer with US DOCSIS 3.0 (8x4) modem that provides all of the testing power needed to ensure HFC networks operate to high standards. This includes balancing of the distribution system, maintaining analog and digital signal quality and controlling return path ingress. Standard Testing Features: 6 MHz Channel Spacing, Return Spectrum Analysis (4 to 65 MHz), Forward Spectrum Analysis (4 to 1000 MHz), Level Measurement, C/N Measurement, QAM Measurement (Level/MER/BER), Channel Plan Scan with Tilt Measurement, Ping, Trace Route, VoIP, Throughput, Cable Modem Statistics, Analog HUM, Depth of Modulation, CSO/CTB, FM Deviation, Sweepless Sweep, Line Viewer and QAM Source. Standard Communication Features: RF Test Port (F-Type, Replaceable), US DOCSIS 3.0 Modem 8x4 (100/304 MBPS), RJ45 Electrical Ethernet Port (10/100MBPS), CM to RJ-45 Mode. The complete kit includes: 860 DSPi Meter, Protective Carrying Case, Shoulder Strap, US AC Power Cable and AC to DC Power Adapter & Battery Charger. Configured with: Power Pack (PP-1), Return Sweep Receiver (SR-1), Vestigial Side Band Modulation (VSB), Vertical Interval Test Signals (VITS) and Return Transmitter Board (RTB) Options
860 DSPi Field Analyzer

860 DSPi - US (PP-1, VP-1, VSB, VITS & RTB)

Configured with options

The 860 DSPi is a handheld spectrum analyzer with US DOCSIS 3.0 (8x4) modem that provides all of the testing power needed to ensure HFC networks operate to high standards. This includes balancing of the distribution system, maintaining analog and digital signal quality and controlling return path ingress. Standard Testing Features: 6 MHz Channel Spacing, Return Spectrum Analysis (4 to 65 MHz), Forward Spectrum Analysis (4 to 1000 MHz), Level Measurement, C/N Measurement, QAM Measurement (Level/MER/BER), Channel Plan Scan with Tilt Measurement, Ping, Trace Route, VoIP, Throughput, Cable Modem Statistics, Analog HUM, Depth of Modulation, CSO/CTB, FM Deviation, Sweepless Sweep, Line Viewer and QAM Source. Standard Communication Features: RF Test Port (F-Type, Replaceable), US DOCSIS 3.0 Modem 8x4 (100/304 MBPS), RJ45 Electrical Ethernet Port (10/100MBPS), CM to RJ-45 Mode. The complete kit includes: 860 DSPi Meter, Protective Carrying Case, Shoulder Strap, US AC Power Cable and AC to DC Power Adapter & Battery Charger. Configured with: Power Pack (PP-1), Return Tester RSVP (VP-1), Vestigial Side Band Modulation (VSB), Vertical Interval Test Signals (VITS) and Return Transmitter Board (RTB) Options
860 DSPi Field Analyzer

860 DSPi - US (PP-1, SR-1, VP-1, VSB, VITS & RTB)

Configured with options

The 860 DSPi is a handheld spectrum analyzer with US DOCSIS 3.0 (8x4) modem that provides all of the testing power needed to ensure HFC networks operate to high standards. This includes balancing of the distribution system, maintaining analog and digital signal quality and controlling return path ingress. Standard Testing Features: 6 MHz Channel Spacing, Return Spectrum Analysis (4 to 65 MHz), Forward Spectrum Analysis (4 to 1000 MHz), Level Measurement, C/N Measurement, QAM Measurement (Level/MER/BER), Channel Plan Scan with Tilt Measurement, Ping, Trace Route, VoIP, Throughput, Cable Modem Statistics, Analog HUM, Depth of Modulation, CSO/CTB, FM Deviation, Sweepless Sweep, Line Viewer and QAM Source. Standard Communication Features: RF Test Port (F-Type, Replaceable), US DOCSIS 3.0 Modem 8x4 (100/304 MBPS), RJ45 Electrical Ethernet Port (10/100MBPS), CM to RJ-45 Mode. The complete kit includes: 860 DSPi Meter, Protective Carrying Case, Shoulder Strap, US AC Power Cable and AC to DC Power Adapter & Battery Charger. Configured with: Power Pack (PP-1), Return Sweep Receiver (SR-1), Return Tester RSVP (VP-1), Vestigial Side Band Modulation (VSB), Vertical Interval Test Signals (VITS) and Return Transmitter Board (RTB) Options
860 DSPi Field Analyzer

860 DSPi - US (PP-1, SA-1, VSB & VITS)

Configured with options

The 860 DSPi is a handheld spectrum analyzer with US DOCSIS 3.0 (8x4) modem that provides all of the testing power needed to ensure HFC networks operate to high standards. This includes balancing of the distribution system, maintaining analog and digital signal quality and controlling return path ingress. Standard Testing Features: 6 MHz Channel Spacing, Return Spectrum Analysis (4 to 65 MHz), Forward Spectrum Analysis (4 to 1000 MHz), Level Measurement, C/N Measurement, QAM Measurement (Level/MER/BER), Channel Plan Scan with Tilt Measurement, Ping, Trace Route, VoIP, Throughput, Cable Modem Statistics, Analog HUM, Depth of Modulation, CSO/CTB, FM Deviation, Sweepless Sweep, Line Viewer and QAM Source. Standard Communication Features: RF Test Port (F-Type, Replaceable), US DOCSIS 3.0 Modem 8x4 (100/304 MBPS), RJ45 Electrical Ethernet Port (10/100MBPS), CM to RJ-45 Mode. The complete kit includes: 860 DSPi Meter, Protective Carrying Case, Shoulder Strap, US AC Power Cable and AC to DC Power Adapter & Battery Charger. Configured with: Power Pack (PP-1), Spectrum Analyzer (SA-1), Vestigial Side Band Modulation (VSB) and Vertical Interval Test Signals (VITS) Options
860 DSPi Field Analyzer

860 DSPi - US (PP-1, SR-1, SA-1, VSB, VITS & RTB)

Configured with options

The 860 DSPi is a handheld spectrum analyzer with US DOCSIS 3.0 (8x4) modem that provides all of the testing power needed to ensure HFC networks operate to high standards. This includes balancing of the distribution system, maintaining analog and digital signal quality and controlling return path ingress. Standard Testing Features: 6 MHz Channel Spacing, Return Spectrum Analysis (4 to 65 MHz), Forward Spectrum Analysis (4 to 1000 MHz), Level Measurement, C/N Measurement, QAM Measurement (Level/MER/BER), Channel Plan Scan with Tilt Measurement, Ping, Trace Route, VoIP, Throughput, Cable Modem Statistics, Analog HUM, Depth of Modulation, CSO/CTB, FM Deviation, Sweepless Sweep, Line Viewer and QAM Source. Standard Communication Features: RF Test Port (F-Type, Replaceable), US DOCSIS 3.0 Modem 8x4 (100/304 MBPS), RJ45 Electrical Ethernet Port (10/100MBPS), CM to RJ-45 Mode. The complete kit includes: 860 DSPi Meter, Protective Carrying Case, Shoulder Strap, US AC Power Cable and AC to DC Power Adapter & Battery Charger. Configured with: Power Pack (PP-1), Return Sweep Receiver (SR-1), Spectrum Analyzer (SA-1), Vestigial Side Band Modulation (VSB), Vertical Interval Test Signals (VITS) and Return Transmitter Board (RTB) Options
860 DSPi Field Analyzer

860 DSPi - US (PP-1, VP-1, SA-1, VSB, VITS & RTB)

Configured with options

The 860 DSPi is a handheld spectrum analyzer with US DOCSIS 3.0 (8x4) modem that provides all of the testing power needed to ensure HFC networks operate to high standards. This includes balancing of the distribution system, maintaining analog and digital signal quality and controlling return path ingress. Standard Testing Features: 6 MHz Channel Spacing, Return Spectrum Analysis (4 to 65 MHz), Forward Spectrum Analysis (4 to 1000 MHz), Level Measurement, C/N Measurement, QAM Measurement (Level/MER/BER), Channel Plan Scan with Tilt Measurement, Ping, Trace Route, VoIP, Throughput, Cable Modem Statistics, Analog HUM, Depth of Modulation, CSO/CTB, FM Deviation, Sweepless Sweep, Line Viewer and QAM Source. Standard Communication Features: RF Test Port (F-Type, Replaceable), US DOCSIS 3.0 Modem 8x4 (100/304 MBPS), RJ45 Electrical Ethernet Port (10/100MBPS), CM to RJ-45 Mode. The complete kit includes: 860 DSPi Meter, Protective Carrying Case, Shoulder Strap, US AC Power Cable and AC to DC Power Adapter & Battery Charger. Configured with: Power Pack (PP-1), Return Tester RSVP (VP-1), Spectrum Analyzer (SA-1), Vestigial Side Band Modulation (VSB), Vertical Interval Test Signals (VITS) and Return Transmitter Board (RTB) Options
860 DSPi Field Analyzer

860 DSPi - US (PP-1, SR-1, VP-1, SA-1, VSB, VITS & RTB)

Configured with options

The 860 DSPi is a handheld spectrum analyzer with US DOCSIS 3.0 (8x4) modem that provides all of the testing power needed to ensure HFC networks operate to high standards. This includes balancing of the distribution system, maintaining analog and digital signal quality and controlling return path ingress. Standard Testing Features: 6 MHz Channel Spacing, Return Spectrum Analysis (4 to 65 MHz), Forward Spectrum Analysis (4 to 1000 MHz), Level Measurement, C/N Measurement, QAM Measurement (Level/MER/BER), Channel Plan Scan with Tilt Measurement, Ping, Trace Route, VoIP, Throughput, Cable Modem Statistics, Analog HUM, Depth of Modulation, CSO/CTB, FM Deviation, Sweepless Sweep, Line Viewer and QAM Source. Standard Communication Features: RF Test Port (F-Type, Replaceable), US DOCSIS 3.0 Modem 8x4 (100/304 MBPS), RJ45 Electrical Ethernet Port (10/100MBPS), CM to RJ-45 Mode. The complete kit includes: 860 DSPi Meter, Protective Carrying Case, Shoulder Strap, US AC Power Cable and AC to DC Power Adapter & Battery Charger. Configured with: Power Pack (PP-1), Return Sweep Receiver (SR-1), Return Tester RSVP (VP-1), Spectrum Analyzer (SA-1), Vestigial Side Band Modulation (VSB), Vertical Interval Test Signals (VITS) and Return Transmitter Board (RTB) Options
860 DSPi Field Analyzer

860 DSPi - US (PP-1, QA-2, VSB & VITS)

Configured with options

The 860 DSPi is a handheld spectrum analyzer with US DOCSIS 3.0 (8x4) modem that provides all of the testing power needed to ensure HFC networks operate to high standards. This includes balancing of the distribution system, maintaining analog and digital signal quality and controlling return path ingress. Standard Testing Features: 6 MHz Channel Spacing, Return Spectrum Analysis (4 to 65 MHz), Forward Spectrum Analysis (4 to 1000 MHz), Level Measurement, C/N Measurement, QAM Measurement (Level/MER/BER), Channel Plan Scan with Tilt Measurement, Ping, Trace Route, VoIP, Throughput, Cable Modem Statistics, Analog HUM, Depth of Modulation, CSO/CTB, FM Deviation, Sweepless Sweep, Line Viewer and QAM Source. Standard Communication Features: RF Test Port (F-Type, Replaceable), US DOCSIS 3.0 Modem 8x4 (100/304 MBPS), RJ45 Electrical Ethernet Port (10/100MBPS), CM to RJ-45 Mode. The complete kit includes: 860 DSPi Meter, Protective Carrying Case, Shoulder Strap, US AC Power Cable and AC to DC Power Adapter & Battery Charger. Configured with: Power Pack (PP-1), QAM (QA-2), Vestigial Side Band Modulation (VSB) and Vertical Interval Test Signals (VITS) Options
860 DSPi Field Analyzer

860 DSPi - US (PP-1, SR-1, QA-2, VSB, VITS & RTB)

Configured with options

The 860 DSPi is a handheld spectrum analyzer with US DOCSIS 3.0 (8x4) modem that provides all of the testing power needed to ensure HFC networks operate to high standards. This includes balancing of the distribution system, maintaining analog and digital signal quality and controlling return path ingress. Standard Testing Features: 6 MHz Channel Spacing, Return Spectrum Analysis (4 to 65 MHz), Forward Spectrum Analysis (4 to 1000 MHz), Level Measurement, C/N Measurement, QAM Measurement (Level/MER/BER), Channel Plan Scan with Tilt Measurement, Ping, Trace Route, VoIP, Throughput, Cable Modem Statistics, Analog HUM, Depth of Modulation, CSO/CTB, FM Deviation, Sweepless Sweep, Line Viewer and QAM Source. Standard Communication Features: RF Test Port (F-Type, Replaceable), US DOCSIS 3.0 Modem 8x4 (100/304 MBPS), RJ45 Electrical Ethernet Port (10/100MBPS), CM to RJ-45 Mode. The complete kit includes: 860 DSPi Meter, Protective Carrying Case, Shoulder Strap, US AC Power Cable and AC to DC Power Adapter & Battery Charger. Configured with: Power Pack (PP-1), Return Sweep Receiver (SR-1), QAM (QA-2), Vestigial Side Band Modulation (VSB), Vertical Interval Test Signals (VITS) and Return Transmitter Board (RTB) Options
860 DSPi Field Analyzer

860 DSPi - US (PP-1, VP-1, QA-2, VSB, VITS & RTB)

Configured with options

The 860 DSPi is a handheld spectrum analyzer with US DOCSIS 3.0 (8x4) modem that provides all of the testing power needed to ensure HFC networks operate to high standards. This includes balancing of the distribution system, maintaining analog and digital signal quality and controlling return path ingress. Standard Testing Features: 6 MHz Channel Spacing, Return Spectrum Analysis (4 to 65 MHz), Forward Spectrum Analysis (4 to 1000 MHz), Level Measurement, C/N Measurement, QAM Measurement (Level/MER/BER), Channel Plan Scan with Tilt Measurement, Ping, Trace Route, VoIP, Throughput, Cable Modem Statistics, Analog HUM, Depth of Modulation, CSO/CTB, FM Deviation, Sweepless Sweep, Line Viewer and QAM Source. Standard Communication Features: RF Test Port (F-Type, Replaceable), US DOCSIS 3.0 Modem 8x4 (100/304 MBPS), RJ45 Electrical Ethernet Port (10/100MBPS), CM to RJ-45 Mode. The complete kit includes: 860 DSPi Meter, Protective Carrying Case, Shoulder Strap, US AC Power Cable and AC to DC Power Adapter & Battery Charger. Configured with: Power Pack (PP-1), Return Tester RSVP (VP-1), QAM (QA-2), Vestigial Side Band Modulation (VSB), Vertical Interval Test Signals (VITS) and Return Transmitter Board (RTB) Options
860 DSPi Field Analyzer

860 DSPi - US (PP-1, SR-1, VP-1, QA-2, VSB, VITS & RTB)

Configured with options

The 860 DSPi is a handheld spectrum analyzer with US DOCSIS 3.0 (8x4) modem that provides all of the testing power needed to ensure HFC networks operate to high standards. This includes balancing of the distribution system, maintaining analog and digital signal quality and controlling return path ingress. Standard Testing Features: 6 MHz Channel Spacing, Return Spectrum Analysis (4 to 65 MHz), Forward Spectrum Analysis (4 to 1000 MHz), Level Measurement, C/N Measurement, QAM Measurement (Level/MER/BER), Channel Plan Scan with Tilt Measurement, Ping, Trace Route, VoIP, Throughput, Cable Modem Statistics, Analog HUM, Depth of Modulation, CSO/CTB, FM Deviation, Sweepless Sweep, Line Viewer and QAM Source. Standard Communication Features: RF Test Port (F-Type, Replaceable), US DOCSIS 3.0 Modem 8x4 (100/304 MBPS), RJ45 Electrical Ethernet Port (10/100MBPS), CM to RJ-45 Mode. The complete kit includes: 860 DSPi Meter, Protective Carrying Case, Shoulder Strap, US AC Power Cable and AC to DC Power Adapter & Battery Charger. Configured with: Power Pack (PP-1), Return Sweep Receiver (SR-1), Return Tester RSVP (VP-1), QAM (QA-2), Vestigial Side Band Modulation (VSB), Vertical Interval Test Signals (VITS) and Return Transmitter Board (RTB) Options
860 DSPi Field Analyzer

860 DSPi - US (PP-1, SA-1, QA-2, VSB & VITS)

Configured with options

The 860 DSPi is a handheld spectrum analyzer with US DOCSIS 3.0 (8x4) modem that provides all of the testing power needed to ensure HFC networks operate to high standards. This includes balancing of the distribution system, maintaining analog and digital signal quality and controlling return path ingress. Standard Testing Features: 6 MHz Channel Spacing, Return Spectrum Analysis (4 to 65 MHz), Forward Spectrum Analysis (4 to 1000 MHz), Level Measurement, C/N Measurement, QAM Measurement (Level/MER/BER), Channel Plan Scan with Tilt Measurement, Ping, Trace Route, VoIP, Throughput, Cable Modem Statistics, Analog HUM, Depth of Modulation, CSO/CTB, FM Deviation, Sweepless Sweep, Line Viewer and QAM Source. Standard Communication Features: RF Test Port (F-Type, Replaceable), US DOCSIS 3.0 Modem 8x4 (100/304 MBPS), RJ45 Electrical Ethernet Port (10/100MBPS), CM to RJ-45 Mode. The complete kit includes: 860 DSPi Meter, Protective Carrying Case, Shoulder Strap, US AC Power Cable and AC to DC Power Adapter & Battery Charger. Configured with: Power Pack (PP-1), Spectrum Analyzer (SA-1), QAM (QA-2), Vestigial Side Band Modulation (VSB) and Vertical Interval Test Signals (VITS) Options
860 DSPi Field Analyzer

860 DSPi - US (PP-1, SR-1, SA-1, QA-2, VSB, VITS & RTB)

Configured with options

The 860 DSPi is a handheld spectrum analyzer with US DOCSIS 3.0 (8x4) modem that provides all of the testing power needed to ensure HFC networks operate to high standards. This includes balancing of the distribution system, maintaining analog and digital signal quality and controlling return path ingress. Standard Testing Features: 6 MHz Channel Spacing, Return Spectrum Analysis (4 to 65 MHz), Forward Spectrum Analysis (4 to 1000 MHz), Level Measurement, C/N Measurement, QAM Measurement (Level/MER/BER), Channel Plan Scan with Tilt Measurement, Ping, Trace Route, VoIP, Throughput, Cable Modem Statistics, Analog HUM, Depth of Modulation, CSO/CTB, FM Deviation, Sweepless Sweep, Line Viewer and QAM Source. Standard Communication Features: RF Test Port (F-Type, Replaceable), US DOCSIS 3.0 Modem 8x4 (100/304 MBPS), RJ45 Electrical Ethernet Port (10/100MBPS), CM to RJ-45 Mode. The complete kit includes: 860 DSPi Meter, Protective Carrying Case, Shoulder Strap, US AC Power Cable and AC to DC Power Adapter & Battery Charger. Configured with: Power Pack (PP-1), Return Sweep Receiver (SR-1), Spectrum Analyzer (SA-1), QAM (QA-2), Vestigial Side Band Modulation (VSB), Vertical Interval Test Signals (VITS) and Return Transmitter Board (RTB) Options
860 DSPi Field Analyzer

860 DSPi - US (PP-1, VP-1, SA-1, QA-2, VSB, VITS & RTB)

Configured with options

The 860 DSPi is a handheld spectrum analyzer with US DOCSIS 3.0 (8x4) modem that provides all of the testing power needed to ensure HFC networks operate to high standards. This includes balancing of the distribution system, maintaining analog and digital signal quality and controlling return path ingress. Standard Testing Features: 6 MHz Channel Spacing, Return Spectrum Analysis (4 to 65 MHz), Forward Spectrum Analysis (4 to 1000 MHz), Level Measurement, C/N Measurement, QAM Measurement (Level/MER/BER), Channel Plan Scan with Tilt Measurement, Ping, Trace Route, VoIP, Throughput, Cable Modem Statistics, Analog HUM, Depth of Modulation, CSO/CTB, FM Deviation, Sweepless Sweep, Line Viewer and QAM Source. Standard Communication Features: RF Test Port (F-Type, Replaceable), US DOCSIS 3.0 Modem 8x4 (100/304 MBPS), RJ45 Electrical Ethernet Port (10/100MBPS), CM to RJ-45 Mode. The complete kit includes: 860 DSPi Meter, Protective Carrying Case, Shoulder Strap, US AC Power Cable and AC to DC Power Adapter & Battery Charger. Configured with: Power Pack (PP-1), Return Tester RSVP (VP-1), Spectrum Analyzer (SA-1), QAM (QA-2), Vestigial Side Band Modulation (VSB), Vertical Interval Test Signals (VITS) and Return Transmitter Board (RTB) Options
860 DSPi Field Analyzer

860 DSPi - US (PP-1, SR-1, VP-1, SA-1, QA-2, VSB, VITS & RTB)

Configured with options

The 860 DSPi is a handheld spectrum analyzer with US DOCSIS 3.0 (8x4) modem that provides all of the testing power needed to ensure HFC networks operate to high standards. This includes balancing of the distribution system, maintaining analog and digital signal quality and controlling return path ingress. Standard Testing Features: 6 MHz Channel Spacing, Return Spectrum Analysis (4 to 65 MHz), Forward Spectrum Analysis (4 to 1000 MHz), Level Measurement, C/N Measurement, QAM Measurement (Level/MER/BER), Channel Plan Scan with Tilt Measurement, Ping, Trace Route, VoIP, Throughput, Cable Modem Statistics, Analog HUM, Depth of Modulation, CSO/CTB, FM Deviation, Sweepless Sweep, Line Viewer and QAM Source. Standard Communication Features: RF Test Port (F-Type, Replaceable), US DOCSIS 3.0 Modem 8x4 (100/304 MBPS), RJ45 Electrical Ethernet Port (10/100MBPS), CM to RJ-45 Mode. The complete kit includes: 860 DSPi Meter, Protective Carrying Case, Shoulder Strap, US AC Power Cable and AC to DC Power Adapter & Battery Charger. Configured with: Power Pack (PP-1), Return Sweep Receiver (SR-1), Return Tester RSVP (VP-1), Spectrum Analyzer (SA-1), QAM (QA-2), Vestigial Side Band Modulation (VSB), Vertical Interval Test Signals (VITS) and Return Transmitter Board (RTB) Options
860 DSPi Field Analyzer

860 DSPi - US (PP-1, FS-1 & VITS)

Configured with options

The 860 DSPi is a handheld spectrum analyzer with US DOCSIS 3.0 (8x4) modem that provides all of the testing power needed to ensure HFC networks operate to high standards. This includes balancing of the distribution system, maintaining analog and digital signal quality and controlling return path ingress. Standard Testing Features: 6 MHz Channel Spacing, Return Spectrum Analysis (4 to 65 MHz), Forward Spectrum Analysis (4 to 1000 MHz), Level Measurement, C/N Measurement, QAM Measurement (Level/MER/BER), Channel Plan Scan with Tilt Measurement, Ping, Trace Route, VoIP, Throughput, Cable Modem Statistics, Analog HUM, Depth of Modulation, CSO/CTB, FM Deviation, Sweepless Sweep, Line Viewer and QAM Source. Standard Communication Features: RF Test Port (F-Type, Replaceable), US DOCSIS 3.0 Modem 8x4 (100/304 MBPS), RJ45 Electrical Ethernet Port (10/100MBPS), CM to RJ-45 Mode. The complete kit includes: 860 DSPi Meter, Protective Carrying Case, Shoulder Strap, US AC Power Cable and AC to DC Power Adapter & Battery Charger. Configured with: Power Pack (PP-1), Forward Sweep (FS-1) and Vertical Interval Test Signals (VITS) Options
860 DSPi Field Analyzer

860 DSPi - US (PP-1, SR-1, FS-1, VITS & RTB)

Configured with options

The 860 DSPi is a handheld spectrum analyzer with US DOCSIS 3.0 (8x4) modem that provides all of the testing power needed to ensure HFC networks operate to high standards. This includes balancing of the distribution system, maintaining analog and digital signal quality and controlling return path ingress. Standard Testing Features: 6 MHz Channel Spacing, Return Spectrum Analysis (4 to 65 MHz), Forward Spectrum Analysis (4 to 1000 MHz), Level Measurement, C/N Measurement, QAM Measurement (Level/MER/BER), Channel Plan Scan with Tilt Measurement, Ping, Trace Route, VoIP, Throughput, Cable Modem Statistics, Analog HUM, Depth of Modulation, CSO/CTB, FM Deviation, Sweepless Sweep, Line Viewer and QAM Source. Standard Communication Features: RF Test Port (F-Type, Replaceable), US DOCSIS 3.0 Modem 8x4 (100/304 MBPS), RJ45 Electrical Ethernet Port (10/100MBPS), CM to RJ-45 Mode. The complete kit includes: 860 DSPi Meter, Protective Carrying Case, Shoulder Strap, US AC Power Cable and AC to DC Power Adapter & Battery Charger. Configured with: Power Pack (PP-1), Return Sweep Receiver (SR-1), Forward Sweep (FS-1), Vertical Interval Test Signals (VITS) and Return Transmitter Board (RTB) Options
860 DSPi Field Analyzer

860 DSPi - US (PP-1, VP-1, FS-1, VITS & RTB)

Configured with options

The 860 DSPi is a handheld spectrum analyzer with US DOCSIS 3.0 (8x4) modem that provides all of the testing power needed to ensure HFC networks operate to high standards. This includes balancing of the distribution system, maintaining analog and digital signal quality and controlling return path ingress. Standard Testing Features: 6 MHz Channel Spacing, Return Spectrum Analysis (4 to 65 MHz), Forward Spectrum Analysis (4 to 1000 MHz), Level Measurement, C/N Measurement, QAM Measurement (Level/MER/BER), Channel Plan Scan with Tilt Measurement, Ping, Trace Route, VoIP, Throughput, Cable Modem Statistics, Analog HUM, Depth of Modulation, CSO/CTB, FM Deviation, Sweepless Sweep, Line Viewer and QAM Source. Standard Communication Features: RF Test Port (F-Type, Replaceable), US DOCSIS 3.0 Modem 8x4 (100/304 MBPS), RJ45 Electrical Ethernet Port (10/100MBPS), CM to RJ-45 Mode. The complete kit includes: 860 DSPi Meter, Protective Carrying Case, Shoulder Strap, US AC Power Cable and AC to DC Power Adapter & Battery Charger. Configured with: Power Pack (PP-1), Return Tester RSVP (VP-1), Forward Sweep (FS-1), Vertical Interval Test Signals (VITS) and Return Transmitter Board (RTB) Options
860 DSPi Field Analyzer

860 DSPi - US (PP-1, SR-1, VP-1, FS-1, VITS & RTB)

Configured with options

The 860 DSPi is a handheld spectrum analyzer with US DOCSIS 3.0 (8x4) modem that provides all of the testing power needed to ensure HFC networks operate to high standards. This includes balancing of the distribution system, maintaining analog and digital signal quality and controlling return path ingress. Standard Testing Features: 6 MHz Channel Spacing, Return Spectrum Analysis (4 to 65 MHz), Forward Spectrum Analysis (4 to 1000 MHz), Level Measurement, C/N Measurement, QAM Measurement (Level/MER/BER), Channel Plan Scan with Tilt Measurement, Ping, Trace Route, VoIP, Throughput, Cable Modem Statistics, Analog HUM, Depth of Modulation, CSO/CTB, FM Deviation, Sweepless Sweep, Line Viewer and QAM Source. Standard Communication Features: RF Test Port (F-Type, Replaceable), US DOCSIS 3.0 Modem 8x4 (100/304 MBPS), RJ45 Electrical Ethernet Port (10/100MBPS), CM to RJ-45 Mode. The complete kit includes: 860 DSPi Meter, Protective Carrying Case, Shoulder Strap, US AC Power Cable and AC to DC Power Adapter & Battery Charger. Configured with: Power Pack (PP-1), Return Sweep Receiver (SR-1), Return Tester RSVP (VP-1), Forward Sweep (FS-1), Vertical Interval Test Signals (VITS) and Return Transmitter Board (RTB) Options
860 DSPi Field Analyzer

860 DSPi - US (PP-1, SA-1, FS-1 & VITS)

Configured with options

The 860 DSPi is a handheld spectrum analyzer with US DOCSIS 3.0 (8x4) modem that provides all of the testing power needed to ensure HFC networks operate to high standards. This includes balancing of the distribution system, maintaining analog and digital signal quality and controlling return path ingress. Standard Testing Features: 6 MHz Channel Spacing, Return Spectrum Analysis (4 to 65 MHz), Forward Spectrum Analysis (4 to 1000 MHz), Level Measurement, C/N Measurement, QAM Measurement (Level/MER/BER), Channel Plan Scan with Tilt Measurement, Ping, Trace Route, VoIP, Throughput, Cable Modem Statistics, Analog HUM, Depth of Modulation, CSO/CTB, FM Deviation, Sweepless Sweep, Line Viewer and QAM Source. Standard Communication Features: RF Test Port (F-Type, Replaceable), US DOCSIS 3.0 Modem 8x4 (100/304 MBPS), RJ45 Electrical Ethernet Port (10/100MBPS), CM to RJ-45 Mode. The complete kit includes: 860 DSPi Meter, Protective Carrying Case, Shoulder Strap, US AC Power Cable and AC to DC Power Adapter & Battery Charger. Configured with: Power Pack (PP-1), Spectrum Analyzer (SA-1), Forward Sweep (FS-1) and Vertical Interval Test Signals (VITS) Options
860 DSPi Field Analyzer

860 DSPi - US (PP-1, SR-1, SA-1, FS-1, VITS & RTB)

Configured with options

The 860 DSPi is a handheld spectrum analyzer with US DOCSIS 3.0 (8x4) modem that provides all of the testing power needed to ensure HFC networks operate to high standards. This includes balancing of the distribution system, maintaining analog and digital signal quality and controlling return path ingress. Standard Testing Features: 6 MHz Channel Spacing, Return Spectrum Analysis (4 to 65 MHz), Forward Spectrum Analysis (4 to 1000 MHz), Level Measurement, C/N Measurement, QAM Measurement (Level/MER/BER), Channel Plan Scan with Tilt Measurement, Ping, Trace Route, VoIP, Throughput, Cable Modem Statistics, Analog HUM, Depth of Modulation, CSO/CTB, FM Deviation, Sweepless Sweep, Line Viewer and QAM Source. Standard Communication Features: RF Test Port (F-Type, Replaceable), US DOCSIS 3.0 Modem 8x4 (100/304 MBPS), RJ45 Electrical Ethernet Port (10/100MBPS), CM to RJ-45 Mode. The complete kit includes: 860 DSPi Meter, Protective Carrying Case, Shoulder Strap, US AC Power Cable and AC to DC Power Adapter & Battery Charger. Configured with: Power Pack (PP-1), Return Sweep Receiver (SR-1), Spectrum Analyzer (SA-1), Forward Sweep (FS-1), Vertical Interval Test Signals (VITS) and Return Transmitter Board (RTB) Options
860 DSPi Field Analyzer

860 DSPi - US (PP-1, VP-1, SA-1, FS-1, VITS & RTB)

Configured with options

The 860 DSPi is a handheld spectrum analyzer with US DOCSIS 3.0 (8x4) modem that provides all of the testing power needed to ensure HFC networks operate to high standards. This includes balancing of the distribution system, maintaining analog and digital signal quality and controlling return path ingress. Standard Testing Features: 6 MHz Channel Spacing, Return Spectrum Analysis (4 to 65 MHz), Forward Spectrum Analysis (4 to 1000 MHz), Level Measurement, C/N Measurement, QAM Measurement (Level/MER/BER), Channel Plan Scan with Tilt Measurement, Ping, Trace Route, VoIP, Throughput, Cable Modem Statistics, Analog HUM, Depth of Modulation, CSO/CTB, FM Deviation, Sweepless Sweep, Line Viewer and QAM Source. Standard Communication Features: RF Test Port (F-Type, Replaceable), US DOCSIS 3.0 Modem 8x4 (100/304 MBPS), RJ45 Electrical Ethernet Port (10/100MBPS), CM to RJ-45 Mode. The complete kit includes: 860 DSPi Meter, Protective Carrying Case, Shoulder Strap, US AC Power Cable and AC to DC Power Adapter & Battery Charger. Configured with: Power Pack (PP-1), Return Tester RSVP (VP-1), Spectrum Analyzer (SA-1), Forward Sweep (FS-1), Vertical Interval Test Signals (VITS) and Return Transmitter Board (RTB) Options
860 DSPi Field Analyzer

860 DSPi - US (PP-1, SR-1, VP-1, SA-1, FS-1, VITS & RTB)

Configured with options

The 860 DSPi is a handheld spectrum analyzer with US DOCSIS 3.0 (8x4) modem that provides all of the testing power needed to ensure HFC networks operate to high standards. This includes balancing of the distribution system, maintaining analog and digital signal quality and controlling return path ingress. Standard Testing Features: 6 MHz Channel Spacing, Return Spectrum Analysis (4 to 65 MHz), Forward Spectrum Analysis (4 to 1000 MHz), Level Measurement, C/N Measurement, QAM Measurement (Level/MER/BER), Channel Plan Scan with Tilt Measurement, Ping, Trace Route, VoIP, Throughput, Cable Modem Statistics, Analog HUM, Depth of Modulation, CSO/CTB, FM Deviation, Sweepless Sweep, Line Viewer and QAM Source. Standard Communication Features: RF Test Port (F-Type, Replaceable), US DOCSIS 3.0 Modem 8x4 (100/304 MBPS), RJ45 Electrical Ethernet Port (10/100MBPS), CM to RJ-45 Mode. The complete kit includes: 860 DSPi Meter, Protective Carrying Case, Shoulder Strap, US AC Power Cable and AC to DC Power Adapter & Battery Charger. Configured with: Power Pack (PP-1), Return Sweep Receiver (SR-1), Return Tester RSVP (VP-1), Spectrum Analyzer (SA-1), Forward Sweep (FS-1), Vertical Interval Test Signals (VITS) and Return Transmitter Board (RTB) Options
860 DSPi Field Analyzer

860 DSPi - US (PP-1, QA-2, FS-1 & VITS)

Configured with options

The 860 DSPi is a handheld spectrum analyzer with US DOCSIS 3.0 (8x4) modem that provides all of the testing power needed to ensure HFC networks operate to high standards. This includes balancing of the distribution system, maintaining analog and digital signal quality and controlling return path ingress. Standard Testing Features: 6 MHz Channel Spacing, Return Spectrum Analysis (4 to 65 MHz), Forward Spectrum Analysis (4 to 1000 MHz), Level Measurement, C/N Measurement, QAM Measurement (Level/MER/BER), Channel Plan Scan with Tilt Measurement, Ping, Trace Route, VoIP, Throughput, Cable Modem Statistics, Analog HUM, Depth of Modulation, CSO/CTB, FM Deviation, Sweepless Sweep, Line Viewer and QAM Source. Standard Communication Features: RF Test Port (F-Type, Replaceable), US DOCSIS 3.0 Modem 8x4 (100/304 MBPS), RJ45 Electrical Ethernet Port (10/100MBPS), CM to RJ-45 Mode. The complete kit includes: 860 DSPi Meter, Protective Carrying Case, Shoulder Strap, US AC Power Cable and AC to DC Power Adapter & Battery Charger. Configured with: Power Pack (PP-1), QAM (QA-2), Forward Sweep (FS-1) and Vertical Interval Test Signals (VITS) Options
860 DSPi Field Analyzer

860 DSPi - US (PP-1, SR-1, QA-2, FS-1, VITS & RTB)

Configured with options

The 860 DSPi is a handheld spectrum analyzer with US DOCSIS 3.0 (8x4) modem that provides all of the testing power needed to ensure HFC networks operate to high standards. This includes balancing of the distribution system, maintaining analog and digital signal quality and controlling return path ingress. Standard Testing Features: 6 MHz Channel Spacing, Return Spectrum Analysis (4 to 65 MHz), Forward Spectrum Analysis (4 to 1000 MHz), Level Measurement, C/N Measurement, QAM Measurement (Level/MER/BER), Channel Plan Scan with Tilt Measurement, Ping, Trace Route, VoIP, Throughput, Cable Modem Statistics, Analog HUM, Depth of Modulation, CSO/CTB, FM Deviation, Sweepless Sweep, Line Viewer and QAM Source. Standard Communication Features: RF Test Port (F-Type, Replaceable), US DOCSIS 3.0 Modem 8x4 (100/304 MBPS), RJ45 Electrical Ethernet Port (10/100MBPS), CM to RJ-45 Mode. The complete kit includes: 860 DSPi Meter, Protective Carrying Case, Shoulder Strap, US AC Power Cable and AC to DC Power Adapter & Battery Charger. Configured with: Power Pack (PP-1), Return Sweep Receiver (SR-1), QAM (QA-2), Forward Sweep (FS-1), Vertical Interval Test Signals (VITS) and Return Transmitter Board (RTB) Options
860 DSPi Field Analyzer

860 DSPi - US (PP-1, VP-1, QA-2, FS-1, VITS & RTB)

Configured with options

The 860 DSPi is a handheld spectrum analyzer with US DOCSIS 3.0 (8x4) modem that provides all of the testing power needed to ensure HFC networks operate to high standards. This includes balancing of the distribution system, maintaining analog and digital signal quality and controlling return path ingress. Standard Testing Features: 6 MHz Channel Spacing, Return Spectrum Analysis (4 to 65 MHz), Forward Spectrum Analysis (4 to 1000 MHz), Level Measurement, C/N Measurement, QAM Measurement (Level/MER/BER), Channel Plan Scan with Tilt Measurement, Ping, Trace Route, VoIP, Throughput, Cable Modem Statistics, Analog HUM, Depth of Modulation, CSO/CTB, FM Deviation, Sweepless Sweep, Line Viewer and QAM Source. Standard Communication Features: RF Test Port (F-Type, Replaceable), US DOCSIS 3.0 Modem 8x4 (100/304 MBPS), RJ45 Electrical Ethernet Port (10/100MBPS), CM to RJ-45 Mode. The complete kit includes: 860 DSPi Meter, Protective Carrying Case, Shoulder Strap, US AC Power Cable and AC to DC Power Adapter & Battery Charger. Configured with: Power Pack (PP-1), Return Tester RSVP (VP-1), QAM (QA-2), Forward Sweep (FS-1), Vertical Interval Test Signals (VITS) and Return Transmitter Board (RTB) Options
860 DSPi Field Analyzer

860 DSPi - US (PP-1, SR-1, VP-1, QA-2, FS-1, VITS & RTB)

Configured with options

The 860 DSPi is a handheld spectrum analyzer with US DOCSIS 3.0 (8x4) modem that provides all of the testing power needed to ensure HFC networks operate to high standards. This includes balancing of the distribution system, maintaining analog and digital signal quality and controlling return path ingress. Standard Testing Features: 6 MHz Channel Spacing, Return Spectrum Analysis (4 to 65 MHz), Forward Spectrum Analysis (4 to 1000 MHz), Level Measurement, C/N Measurement, QAM Measurement (Level/MER/BER), Channel Plan Scan with Tilt Measurement, Ping, Trace Route, VoIP, Throughput, Cable Modem Statistics, Analog HUM, Depth of Modulation, CSO/CTB, FM Deviation, Sweepless Sweep, Line Viewer and QAM Source. Standard Communication Features: RF Test Port (F-Type, Replaceable), US DOCSIS 3.0 Modem 8x4 (100/304 MBPS), RJ45 Electrical Ethernet Port (10/100MBPS), CM to RJ-45 Mode. The complete kit includes: 860 DSPi Meter, Protective Carrying Case, Shoulder Strap, US AC Power Cable and AC to DC Power Adapter & Battery Charger. Configured with: Power Pack (PP-1), Return Sweep Receiver (SR-1), Return Tester RSVP (VP-1), QAM (QA-2), Forward Sweep (FS-1), Vertical Interval Test Signals (VITS) and Return Transmitter Board (RTB) Options
860 DSPi Field Analyzer

860 DSPi - US (PP-1, SA-1, QA-2, FS-1 & VITS)

Configured with options

The 860 DSPi is a handheld spectrum analyzer with US DOCSIS 3.0 (8x4) modem that provides all of the testing power needed to ensure HFC networks operate to high standards. This includes balancing of the distribution system, maintaining analog and digital signal quality and controlling return path ingress. Standard Testing Features: 6 MHz Channel Spacing, Return Spectrum Analysis (4 to 65 MHz), Forward Spectrum Analysis (4 to 1000 MHz), Level Measurement, C/N Measurement, QAM Measurement (Level/MER/BER), Channel Plan Scan with Tilt Measurement, Ping, Trace Route, VoIP, Throughput, Cable Modem Statistics, Analog HUM, Depth of Modulation, CSO/CTB, FM Deviation, Sweepless Sweep, Line Viewer and QAM Source. Standard Communication Features: RF Test Port (F-Type, Replaceable), US DOCSIS 3.0 Modem 8x4 (100/304 MBPS), RJ45 Electrical Ethernet Port (10/100MBPS), CM to RJ-45 Mode. The complete kit includes: 860 DSPi Meter, Protective Carrying Case, Shoulder Strap, US AC Power Cable and AC to DC Power Adapter & Battery Charger. Configured with: Power Pack (PP-1), Spectrum Analyzer (SA-1), QAM (QA-2), Forward Sweep (FS-1) and Vertical Interval Test Signals (VITS) Options
860 DSPi Field Analyzer

860 DSPi - US (PP-1, SR-1, SA-1, QA-2, FS-1, VITS & RTB)

Configured with options

The 860 DSPi is a handheld spectrum analyzer with US DOCSIS 3.0 (8x4) modem that provides all of the testing power needed to ensure HFC networks operate to high standards. This includes balancing of the distribution system, maintaining analog and digital signal quality and controlling return path ingress. Standard Testing Features: 6 MHz Channel Spacing, Return Spectrum Analysis (4 to 65 MHz), Forward Spectrum Analysis (4 to 1000 MHz), Level Measurement, C/N Measurement, QAM Measurement (Level/MER/BER), Channel Plan Scan with Tilt Measurement, Ping, Trace Route, VoIP, Throughput, Cable Modem Statistics, Analog HUM, Depth of Modulation, CSO/CTB, FM Deviation, Sweepless Sweep, Line Viewer and QAM Source. Standard Communication Features: RF Test Port (F-Type, Replaceable), US DOCSIS 3.0 Modem 8x4 (100/304 MBPS), RJ45 Electrical Ethernet Port (10/100MBPS), CM to RJ-45 Mode. The complete kit includes: 860 DSPi Meter, Protective Carrying Case, Shoulder Strap, US AC Power Cable and AC to DC Power Adapter & Battery Charger. Configured with: Power Pack (PP-1), Return Sweep Receiver (SR-1), Spectrum Analyzer (SA-1), QAM (QA-2), Forward Sweep (FS-1), Vertical Interval Test Signals (VITS) and Return Transmitter Board (RTB) Options
860 DSPi Field Analyzer

860 DSPi - US (PP-1, VP-1, SA-1, QA-2, FS-1, VITS & RTB)

Configured with options

The 860 DSPi is a handheld spectrum analyzer with US DOCSIS 3.0 (8x4) modem that provides all of the testing power needed to ensure HFC networks operate to high standards. This includes balancing of the distribution system, maintaining analog and digital signal quality and controlling return path ingress. Standard Testing Features: 6 MHz Channel Spacing, Return Spectrum Analysis (4 to 65 MHz), Forward Spectrum Analysis (4 to 1000 MHz), Level Measurement, C/N Measurement, QAM Measurement (Level/MER/BER), Channel Plan Scan with Tilt Measurement, Ping, Trace Route, VoIP, Throughput, Cable Modem Statistics, Analog HUM, Depth of Modulation, CSO/CTB, FM Deviation, Sweepless Sweep, Line Viewer and QAM Source. Standard Communication Features: RF Test Port (F-Type, Replaceable), US DOCSIS 3.0 Modem 8x4 (100/304 MBPS), RJ45 Electrical Ethernet Port (10/100MBPS), CM to RJ-45 Mode. The complete kit includes: 860 DSPi Meter, Protective Carrying Case, Shoulder Strap, US AC Power Cable and AC to DC Power Adapter & Battery Charger. Configured with: Power Pack (PP-1), Return Tester RSVP (VP-1), Spectrum Analyzer (SA-1), QAM (QA-2), Forward Sweep (FS-1), Vertical Interval Test Signals (VITS) and Return Transmitter Board (RTB) Options
860 DSPi Field Analyzer

860 DSPi - US (PP-1, SR-1, VP-1, SA-1, QA-2, FS-1, VITS & RTB)

Configured with options

The 860 DSPi is a handheld spectrum analyzer with US DOCSIS 3.0 (8x4) modem that provides all of the testing power needed to ensure HFC networks operate to high standards. This includes balancing of the distribution system, maintaining analog and digital signal quality and controlling return path ingress. Standard Testing Features: 6 MHz Channel Spacing, Return Spectrum Analysis (4 to 65 MHz), Forward Spectrum Analysis (4 to 1000 MHz), Level Measurement, C/N Measurement, QAM Measurement (Level/MER/BER), Channel Plan Scan with Tilt Measurement, Ping, Trace Route, VoIP, Throughput, Cable Modem Statistics, Analog HUM, Depth of Modulation, CSO/CTB, FM Deviation, Sweepless Sweep, Line Viewer and QAM Source. Standard Communication Features: RF Test Port (F-Type, Replaceable), US DOCSIS 3.0 Modem 8x4 (100/304 MBPS), RJ45 Electrical Ethernet Port (10/100MBPS), CM to RJ-45 Mode. The complete kit includes: 860 DSPi Meter, Protective Carrying Case, Shoulder Strap, US AC Power Cable and AC to DC Power Adapter & Battery Charger. Configured with: Power Pack (PP-1), Return Sweep Receiver (SR-1), Return Tester RSVP (VP-1), Spectrum Analyzer (SA-1), QAM (QA-2), Forward Sweep (FS-1), Vertical Interval Test Signals (VITS) and Return Transmitter Board (RTB) Options
860 DSPi Field Analyzer

860 DSPi - US (PP-1, VSB, FS-1 & VITS)

Configured with options

The 860 DSPi is a handheld spectrum analyzer with US DOCSIS 3.0 (8x4) modem that provides all of the testing power needed to ensure HFC networks operate to high standards. This includes balancing of the distribution system, maintaining analog and digital signal quality and controlling return path ingress. Standard Testing Features: 6 MHz Channel Spacing, Return Spectrum Analysis (4 to 65 MHz), Forward Spectrum Analysis (4 to 1000 MHz), Level Measurement, C/N Measurement, QAM Measurement (Level/MER/BER), Channel Plan Scan with Tilt Measurement, Ping, Trace Route, VoIP, Throughput, Cable Modem Statistics, Analog HUM, Depth of Modulation, CSO/CTB, FM Deviation, Sweepless Sweep, Line Viewer and QAM Source. Standard Communication Features: RF Test Port (F-Type, Replaceable), US DOCSIS 3.0 Modem 8x4 (100/304 MBPS), RJ45 Electrical Ethernet Port (10/100MBPS), CM to RJ-45 Mode. The complete kit includes: 860 DSPi Meter, Protective Carrying Case, Shoulder Strap, US AC Power Cable and AC to DC Power Adapter & Battery Charger. Configured with: Power Pack (PP-1), Vestigial Side Band Modulation (VSB), Forward Sweep (FS-1) and Vertical Interval Test Signals (VITS) Options
860 DSPi Field Analyzer

860 DSPi - US (PP-1, SR-1, VSB, FS-1, VITS & RTB)

Configured with options

The 860 DSPi is a handheld spectrum analyzer with US DOCSIS 3.0 (8x4) modem that provides all of the testing power needed to ensure HFC networks operate to high standards. This includes balancing of the distribution system, maintaining analog and digital signal quality and controlling return path ingress. Standard Testing Features: 6 MHz Channel Spacing, Return Spectrum Analysis (4 to 65 MHz), Forward Spectrum Analysis (4 to 1000 MHz), Level Measurement, C/N Measurement, QAM Measurement (Level/MER/BER), Channel Plan Scan with Tilt Measurement, Ping, Trace Route, VoIP, Throughput, Cable Modem Statistics, Analog HUM, Depth of Modulation, CSO/CTB, FM Deviation, Sweepless Sweep, Line Viewer and QAM Source. Standard Communication Features: RF Test Port (F-Type, Replaceable), US DOCSIS 3.0 Modem 8x4 (100/304 MBPS), RJ45 Electrical Ethernet Port (10/100MBPS), CM to RJ-45 Mode. The complete kit includes: 860 DSPi Meter, Protective Carrying Case, Shoulder Strap, US AC Power Cable and AC to DC Power Adapter & Battery Charger. Configured with: Power Pack (PP-1), Return Sweep Receiver (SR-1), Vestigial Side Band Modulation (VSB), Forward Sweep (FS-1), Vertical Interval Test Signals (VITS) and Return Transmitter Board (RTB) Options
860 DSPi Field Analyzer

860 DSPi - US (PP-1, VP-1, VSB, FS-1, VITS & RTB)

Configured with options

The 860 DSPi is a handheld spectrum analyzer with US DOCSIS 3.0 (8x4) modem that provides all of the testing power needed to ensure HFC networks operate to high standards. This includes balancing of the distribution system, maintaining analog and digital signal quality and controlling return path ingress. Standard Testing Features: 6 MHz Channel Spacing, Return Spectrum Analysis (4 to 65 MHz), Forward Spectrum Analysis (4 to 1000 MHz), Level Measurement, C/N Measurement, QAM Measurement (Level/MER/BER), Channel Plan Scan with Tilt Measurement, Ping, Trace Route, VoIP, Throughput, Cable Modem Statistics, Analog HUM, Depth of Modulation, CSO/CTB, FM Deviation, Sweepless Sweep, Line Viewer and QAM Source. Standard Communication Features: RF Test Port (F-Type, Replaceable), US DOCSIS 3.0 Modem 8x4 (100/304 MBPS), RJ45 Electrical Ethernet Port (10/100MBPS), CM to RJ-45 Mode. The complete kit includes: 860 DSPi Meter, Protective Carrying Case, Shoulder Strap, US AC Power Cable and AC to DC Power Adapter & Battery Charger. Configured with: Power Pack (PP-1), Return Tester RSVP (VP-1), Vestigial Side Band Modulation (VSB), Forward Sweep (FS-1), Vertical Interval Test Signals (VITS) and Return Transmitter Board (RTB) Options
860 DSPi Field Analyzer

860 DSPi - US (PP-1, SR-1, VP-1, VSB, FS-1, VITS & RTB)

Configured with options

The 860 DSPi is a handheld spectrum analyzer with US DOCSIS 3.0 (8x4) modem that provides all of the testing power needed to ensure HFC networks operate to high standards. This includes balancing of the distribution system, maintaining analog and digital signal quality and controlling return path ingress. Standard Testing Features: 6 MHz Channel Spacing, Return Spectrum Analysis (4 to 65 MHz), Forward Spectrum Analysis (4 to 1000 MHz), Level Measurement, C/N Measurement, QAM Measurement (Level/MER/BER), Channel Plan Scan with Tilt Measurement, Ping, Trace Route, VoIP, Throughput, Cable Modem Statistics, Analog HUM, Depth of Modulation, CSO/CTB, FM Deviation, Sweepless Sweep, Line Viewer and QAM Source. Standard Communication Features: RF Test Port (F-Type, Replaceable), US DOCSIS 3.0 Modem 8x4 (100/304 MBPS), RJ45 Electrical Ethernet Port (10/100MBPS), CM to RJ-45 Mode. The complete kit includes: 860 DSPi Meter, Protective Carrying Case, Shoulder Strap, US AC Power Cable and AC to DC Power Adapter & Battery Charger. Configured with: Power Pack (PP-1), Return Sweep Receiver (SR-1), Return Tester RSVP (VP-1), Vestigial Side Band Modulation (VSB), Forward Sweep (FS-1), Vertical Interval Test Signals (VITS) and Return Transmitter Board (RTB) Options
860 DSPi Field Analyzer

860 DSPi - US (PP-1, SA-1, VSB, FS-1 & VITS)

Configured with options

The 860 DSPi is a handheld spectrum analyzer with US DOCSIS 3.0 (8x4) modem that provides all of the testing power needed to ensure HFC networks operate to high standards. This includes balancing of the distribution system, maintaining analog and digital signal quality and controlling return path ingress. Standard Testing Features: 6 MHz Channel Spacing, Return Spectrum Analysis (4 to 65 MHz), Forward Spectrum Analysis (4 to 1000 MHz), Level Measurement, C/N Measurement, QAM Measurement (Level/MER/BER), Channel Plan Scan with Tilt Measurement, Ping, Trace Route, VoIP, Throughput, Cable Modem Statistics, Analog HUM, Depth of Modulation, CSO/CTB, FM Deviation, Sweepless Sweep, Line Viewer and QAM Source. Standard Communication Features: RF Test Port (F-Type, Replaceable), US DOCSIS 3.0 Modem 8x4 (100/304 MBPS), RJ45 Electrical Ethernet Port (10/100MBPS), CM to RJ-45 Mode. The complete kit includes: 860 DSPi Meter, Protective Carrying Case, Shoulder Strap, US AC Power Cable and AC to DC Power Adapter & Battery Charger. Configured with: Power Pack (PP-1), Spectrum Analyzer (SA-1), Vestigial Side Band Modulation (VSB), Forward Sweep (FS-1) and Vertical Interval Test Signals (VITS) Options
860 DSPi Field Analyzer

860 DSPi - US (PP-1, SR-1, SA-1, VSB, FS-1, VITS & RTB)

Configured with options

The 860 DSPi is a handheld spectrum analyzer with US DOCSIS 3.0 (8x4) modem that provides all of the testing power needed to ensure HFC networks operate to high standards. This includes balancing of the distribution system, maintaining analog and digital signal quality and controlling return path ingress. Standard Testing Features: 6 MHz Channel Spacing, Return Spectrum Analysis (4 to 65 MHz), Forward Spectrum Analysis (4 to 1000 MHz), Level Measurement, C/N Measurement, QAM Measurement (Level/MER/BER), Channel Plan Scan with Tilt Measurement, Ping, Trace Route, VoIP, Throughput, Cable Modem Statistics, Analog HUM, Depth of Modulation, CSO/CTB, FM Deviation, Sweepless Sweep, Line Viewer and QAM Source. Standard Communication Features: RF Test Port (F-Type, Replaceable), US DOCSIS 3.0 Modem 8x4 (100/304 MBPS), RJ45 Electrical Ethernet Port (10/100MBPS), CM to RJ-45 Mode. The complete kit includes: 860 DSPi Meter, Protective Carrying Case, Shoulder Strap, US AC Power Cable and AC to DC Power Adapter & Battery Charger. Configured with: Power Pack (PP-1), Return Sweep Receiver (SR-1), Spectrum Analyzer (SA-1), Vestigial Side Band Modulation (VSB), Forward Sweep (FS-1), Vertical Interval Test Signals (VITS) and Return Transmitter Board (RTB) Options
860 DSPi Field Analyzer

860 DSPi - US (PP-1, VP-1, SA-1, VSB, FS-1, VITS & RTB)

Configured with options

The 860 DSPi is a handheld spectrum analyzer with US DOCSIS 3.0 (8x4) modem that provides all of the testing power needed to ensure HFC networks operate to high standards. This includes balancing of the distribution system, maintaining analog and digital signal quality and controlling return path ingress. Standard Testing Features: 6 MHz Channel Spacing, Return Spectrum Analysis (4 to 65 MHz), Forward Spectrum Analysis (4 to 1000 MHz), Level Measurement, C/N Measurement, QAM Measurement (Level/MER/BER), Channel Plan Scan with Tilt Measurement, Ping, Trace Route, VoIP, Throughput, Cable Modem Statistics, Analog HUM, Depth of Modulation, CSO/CTB, FM Deviation, Sweepless Sweep, Line Viewer and QAM Source. Standard Communication Features: RF Test Port (F-Type, Replaceable), US DOCSIS 3.0 Modem 8x4 (100/304 MBPS), RJ45 Electrical Ethernet Port (10/100MBPS), CM to RJ-45 Mode. The complete kit includes: 860 DSPi Meter, Protective Carrying Case, Shoulder Strap, US AC Power Cable and AC to DC Power Adapter & Battery Charger. Configured with: Power Pack (PP-1), Return Tester RSVP (VP-1), Spectrum Analyzer (SA-1), Vestigial Side Band Modulation (VSB), Forward Sweep (FS-1), Vertical Interval Test Signals (VITS) and Return Transmitter Board (RTB) Options
860 DSPi Field Analyzer

860 DSPi - US (PP-1, SR-1, VP-1, SA-1, VSB, FS-1, VITS & RTB)

Configured with options

The 860 DSPi is a handheld spectrum analyzer with US DOCSIS 3.0 (8x4) modem that provides all of the testing power needed to ensure HFC networks operate to high standards. This includes balancing of the distribution system, maintaining analog and digital signal quality and controlling return path ingress. Standard Testing Features: 6 MHz Channel Spacing, Return Spectrum Analysis (4 to 65 MHz), Forward Spectrum Analysis (4 to 1000 MHz), Level Measurement, C/N Measurement, QAM Measurement (Level/MER/BER), Channel Plan Scan with Tilt Measurement, Ping, Trace Route, VoIP, Throughput, Cable Modem Statistics, Analog HUM, Depth of Modulation, CSO/CTB, FM Deviation, Sweepless Sweep, Line Viewer and QAM Source. Standard Communication Features: RF Test Port (F-Type, Replaceable), US DOCSIS 3.0 Modem 8x4 (100/304 MBPS), RJ45 Electrical Ethernet Port (10/100MBPS), CM to RJ-45 Mode. The complete kit includes: 860 DSPi Meter, Protective Carrying Case, Shoulder Strap, US AC Power Cable and AC to DC Power Adapter & Battery Charger. Configured with: Power Pack (PP-1), Return Sweep Receiver (SR-1), Return Tester RSVP (VP-1), Spectrum Analyzer (SA-1), Vestigial Side Band Modulation (VSB), Forward Sweep (FS-1), Vertical Interval Test Signals (VITS) and Return Transmitter Board (RTB) Options
860 DSPi Field Analyzer

860 DSPi - US (PP-1, QA-2, VSB, FS-1 & VITS)

Configured with options

The 860 DSPi is a handheld spectrum analyzer with US DOCSIS 3.0 (8x4) modem that provides all of the testing power needed to ensure HFC networks operate to high standards. This includes balancing of the distribution system, maintaining analog and digital signal quality and controlling return path ingress. Standard Testing Features: 6 MHz Channel Spacing, Return Spectrum Analysis (4 to 65 MHz), Forward Spectrum Analysis (4 to 1000 MHz), Level Measurement, C/N Measurement, QAM Measurement (Level/MER/BER), Channel Plan Scan with Tilt Measurement, Ping, Trace Route, VoIP, Throughput, Cable Modem Statistics, Analog HUM, Depth of Modulation, CSO/CTB, FM Deviation, Sweepless Sweep, Line Viewer and QAM Source. Standard Communication Features: RF Test Port (F-Type, Replaceable), US DOCSIS 3.0 Modem 8x4 (100/304 MBPS), RJ45 Electrical Ethernet Port (10/100MBPS), CM to RJ-45 Mode. The complete kit includes: 860 DSPi Meter, Protective Carrying Case, Shoulder Strap, US AC Power Cable and AC to DC Power Adapter & Battery Charger. Configured with: Power Pack (PP-1), QAM (QA-2), Vestigial Side Band Modulation (VSB), Forward Sweep (FS-1) and Vertical Interval Test Signals (VITS) Options
860 DSPi Field Analyzer

860 DSPi - US (PP-1, SR-1, QA-2, VSB, FS-1, VITS & RTB)

Configured with options

The 860 DSPi is a handheld spectrum analyzer with US DOCSIS 3.0 (8x4) modem that provides all of the testing power needed to ensure HFC networks operate to high standards. This includes balancing of the distribution system, maintaining analog and digital signal quality and controlling return path ingress. Standard Testing Features: 6 MHz Channel Spacing, Return Spectrum Analysis (4 to 65 MHz), Forward Spectrum Analysis (4 to 1000 MHz), Level Measurement, C/N Measurement, QAM Measurement (Level/MER/BER), Channel Plan Scan with Tilt Measurement, Ping, Trace Route, VoIP, Throughput, Cable Modem Statistics, Analog HUM, Depth of Modulation, CSO/CTB, FM Deviation, Sweepless Sweep, Line Viewer and QAM Source. Standard Communication Features: RF Test Port (F-Type, Replaceable), US DOCSIS 3.0 Modem 8x4 (100/304 MBPS), RJ45 Electrical Ethernet Port (10/100MBPS), CM to RJ-45 Mode. The complete kit includes: 860 DSPi Meter, Protective Carrying Case, Shoulder Strap, US AC Power Cable and AC to DC Power Adapter & Battery Charger. Configured with: Power Pack (PP-1), Return Sweep Receiver (SR-1), QAM (QA-2), Vestigial Side Band Modulation (VSB), Forward Sweep (FS-1), Vertical Interval Test Signals (VITS) and Return Transmitter Board (RTB) Options
860 DSPi Field Analyzer

860 DSPi - US (PP-1, VP-1, QA-2, VSB, FS-1, VITS & RTB)

Configured with options

The 860 DSPi is a handheld spectrum analyzer with US DOCSIS 3.0 (8x4) modem that provides all of the testing power needed to ensure HFC networks operate to high standards. This includes balancing of the distribution system, maintaining analog and digital signal quality and controlling return path ingress. Standard Testing Features: 6 MHz Channel Spacing, Return Spectrum Analysis (4 to 65 MHz), Forward Spectrum Analysis (4 to 1000 MHz), Level Measurement, C/N Measurement, QAM Measurement (Level/MER/BER), Channel Plan Scan with Tilt Measurement, Ping, Trace Route, VoIP, Throughput, Cable Modem Statistics, Analog HUM, Depth of Modulation, CSO/CTB, FM Deviation, Sweepless Sweep, Line Viewer and QAM Source. Standard Communication Features: RF Test Port (F-Type, Replaceable), US DOCSIS 3.0 Modem 8x4 (100/304 MBPS), RJ45 Electrical Ethernet Port (10/100MBPS), CM to RJ-45 Mode. The complete kit includes: 860 DSPi Meter, Protective Carrying Case, Shoulder Strap, US AC Power Cable and AC to DC Power Adapter & Battery Charger. Configured with: Power Pack (PP-1), Return Tester RSVP (VP-1), QAM (QA-2), Vestigial Side Band Modulation (VSB), Forward Sweep (FS-1), Vertical Interval Test Signals (VITS) and Return Transmitter Board (RTB) Options
860 DSPi Field Analyzer

860 DSPi - US (PP-1, SR-1, VP-1, QA-2, VSB, FS-1, VITS & RTB)

Configured with options

The 860 DSPi is a handheld spectrum analyzer with US DOCSIS 3.0 (8x4) modem that provides all of the testing power needed to ensure HFC networks operate to high standards. This includes balancing of the distribution system, maintaining analog and digital signal quality and controlling return path ingress. Standard Testing Features: 6 MHz Channel Spacing, Return Spectrum Analysis (4 to 65 MHz), Forward Spectrum Analysis (4 to 1000 MHz), Level Measurement, C/N Measurement, QAM Measurement (Level/MER/BER), Channel Plan Scan with Tilt Measurement, Ping, Trace Route, VoIP, Throughput, Cable Modem Statistics, Analog HUM, Depth of Modulation, CSO/CTB, FM Deviation, Sweepless Sweep, Line Viewer and QAM Source. Standard Communication Features: RF Test Port (F-Type, Replaceable), US DOCSIS 3.0 Modem 8x4 (100/304 MBPS), RJ45 Electrical Ethernet Port (10/100MBPS), CM to RJ-45 Mode. The complete kit includes: 860 DSPi Meter, Protective Carrying Case, Shoulder Strap, US AC Power Cable and AC to DC Power Adapter & Battery Charger. Configured with: Power Pack (PP-1), Return Sweep Receiver (SR-1), Return Tester RSVP (VP-1), QAM (QA-2), Vestigial Side Band Modulation (VSB), Forward Sweep (FS-1), Vertical Interval Test Signals (VITS) and Return Transmitter Board (RTB) Options
860 DSPi Field Analyzer

860 DSPi - US (PP-1, SA-1, QA-2, VSB, FS-1 & VITS)

Configured with options

The 860 DSPi is a handheld spectrum analyzer with US DOCSIS 3.0 (8x4) modem that provides all of the testing power needed to ensure HFC networks operate to high standards. This includes balancing of the distribution system, maintaining analog and digital signal quality and controlling return path ingress. Standard Testing Features: 6 MHz Channel Spacing, Return Spectrum Analysis (4 to 65 MHz), Forward Spectrum Analysis (4 to 1000 MHz), Level Measurement, C/N Measurement, QAM Measurement (Level/MER/BER), Channel Plan Scan with Tilt Measurement, Ping, Trace Route, VoIP, Throughput, Cable Modem Statistics, Analog HUM, Depth of Modulation, CSO/CTB, FM Deviation, Sweepless Sweep, Line Viewer and QAM Source. Standard Communication Features: RF Test Port (F-Type, Replaceable), US DOCSIS 3.0 Modem 8x4 (100/304 MBPS), RJ45 Electrical Ethernet Port (10/100MBPS), CM to RJ-45 Mode. The complete kit includes: 860 DSPi Meter, Protective Carrying Case, Shoulder Strap, US AC Power Cable and AC to DC Power Adapter & Battery Charger. Configured with: Power Pack (PP-1), Spectrum Analyzer (SA-1), QAM (QA-2), Vestigial Side Band Modulation (VSB), Forward Sweep (FS-1) and Vertical Interval Test Signals (VITS) Options
860 DSPi Field Analyzer

860 DSPi - US (PP-1, SR-1, SA-1, QA-2, VSB, FS-1, VITS & RTB)

Configured with options

The 860 DSPi is a handheld spectrum analyzer with US DOCSIS 3.0 (8x4) modem that provides all of the testing power needed to ensure HFC networks operate to high standards. This includes balancing of the distribution system, maintaining analog and digital signal quality and controlling return path ingress. Standard Testing Features: 6 MHz Channel Spacing, Return Spectrum Analysis (4 to 65 MHz), Forward Spectrum Analysis (4 to 1000 MHz), Level Measurement, C/N Measurement, QAM Measurement (Level/MER/BER), Channel Plan Scan with Tilt Measurement, Ping, Trace Route, VoIP, Throughput, Cable Modem Statistics, Analog HUM, Depth of Modulation, CSO/CTB, FM Deviation, Sweepless Sweep, Line Viewer and QAM Source. Standard Communication Features: RF Test Port (F-Type, Replaceable), US DOCSIS 3.0 Modem 8x4 (100/304 MBPS), RJ45 Electrical Ethernet Port (10/100MBPS), CM to RJ-45 Mode. The complete kit includes: 860 DSPi Meter, Protective Carrying Case, Shoulder Strap, US AC Power Cable and AC to DC Power Adapter & Battery Charger. Configured with: Power Pack (PP-1), Return Sweep Receiver (SR-1), Spectrum Analyzer (SA-1), QAM (QA-2), Vestigial Side Band Modulation (VSB), Forward Sweep (FS-1), Vertical Interval Test Signals (VITS) and Return Transmitter Board (RTB) Options
860 DSPi Field Analyzer

860 DSPi - US (PP-1, VP-1, SA-1, QA-2, VSB, FS-1, VITS & RTB)

Configured with options

The 860 DSPi is a handheld spectrum analyzer with US DOCSIS 3.0 (8x4) modem that provides all of the testing power needed to ensure HFC networks operate to high standards. This includes balancing of the distribution system, maintaining analog and digital signal quality and controlling return path ingress. Standard Testing Features: 6 MHz Channel Spacing, Return Spectrum Analysis (4 to 65 MHz), Forward Spectrum Analysis (4 to 1000 MHz), Level Measurement, C/N Measurement, QAM Measurement (Level/MER/BER), Channel Plan Scan with Tilt Measurement, Ping, Trace Route, VoIP, Throughput, Cable Modem Statistics, Analog HUM, Depth of Modulation, CSO/CTB, FM Deviation, Sweepless Sweep, Line Viewer and QAM Source. Standard Communication Features: RF Test Port (F-Type, Replaceable), US DOCSIS 3.0 Modem 8x4 (100/304 MBPS), RJ45 Electrical Ethernet Port (10/100MBPS), CM to RJ-45 Mode. The complete kit includes: 860 DSPi Meter, Protective Carrying Case, Shoulder Strap, US AC Power Cable and AC to DC Power Adapter & Battery Charger. Configured with: Power Pack (PP-1), Return Tester RSVP (VP-1), Spectrum Analyzer (SA-1), QAM (QA-2), Vestigial Side Band Modulation (VSB), Forward Sweep (FS-1), Vertical Interval Test Signals (VITS) and Return Transmitter Board (RTB) Options
860 DSPi Field Analyzer

860 DSPi - US (PP-1, SR-1, VP-1, SA-1, QA-2, VSB, FS-1, VITS & RTB)

Configured with options

The 860 DSPi is a handheld spectrum analyzer with US DOCSIS 3.0 (8x4) modem that provides all of the testing power needed to ensure HFC networks operate to high standards. This includes balancing of the distribution system, maintaining analog and digital signal quality and controlling return path ingress. Standard Testing Features: 6 MHz Channel Spacing, Return Spectrum Analysis (4 to 65 MHz), Forward Spectrum Analysis (4 to 1000 MHz), Level Measurement, C/N Measurement, QAM Measurement (Level/MER/BER), Channel Plan Scan with Tilt Measurement, Ping, Trace Route, VoIP, Throughput, Cable Modem Statistics, Analog HUM, Depth of Modulation, CSO/CTB, FM Deviation, Sweepless Sweep, Line Viewer and QAM Source. Standard Communication Features: RF Test Port (F-Type, Replaceable), US DOCSIS 3.0 Modem 8x4 (100/304 MBPS), RJ45 Electrical Ethernet Port (10/100MBPS), CM to RJ-45 Mode. The complete kit includes: 860 DSPi Meter, Protective Carrying Case, Shoulder Strap, US AC Power Cable and AC to DC Power Adapter & Battery Charger. Configured with: Power Pack (PP-1), Return Sweep Receiver (SR-1), Return Tester RSVP (VP-1), Spectrum Analyzer (SA-1), QAM (QA-2), Vestigial Side Band Modulation (VSB), Forward Sweep (FS-1), Vertical Interval Test Signals (VITS) and Return Transmitter Board (RTB) Options
860 DSPi Field Analyzer

860 DSPi - US (PP-1 & TC-1)

Configured with options

The 860 DSPi is a handheld spectrum analyzer with US DOCSIS 3.0 (8x4) modem that provides all of the testing power needed to ensure HFC networks operate to high standards. This includes balancing of the distribution system, maintaining analog and digital signal quality and controlling return path ingress. Standard Testing Features: 6 MHz Channel Spacing, Return Spectrum Analysis (4 to 65 MHz), Forward Spectrum Analysis (4 to 1000 MHz), Level Measurement, C/N Measurement, QAM Measurement (Level/MER/BER), Channel Plan Scan with Tilt Measurement, Ping, Trace Route, VoIP, Throughput, Cable Modem Statistics, Analog HUM, Depth of Modulation, CSO/CTB, FM Deviation, Sweepless Sweep, Line Viewer and QAM Source. Standard Communication Features: RF Test Port (F-Type, Replaceable), US DOCSIS 3.0 Modem 8x4 (100/304 MBPS), RJ45 Electrical Ethernet Port (10/100MBPS), CM to RJ-45 Mode. The complete kit includes: 860 DSPi Meter, Protective Carrying Case, Shoulder Strap, US AC Power Cable and AC to DC Power Adapter & Battery Charger. Configured with: Power Pack (PP-1) and TraffiControl (TC-1) Options
860 DSPi Field Analyzer

860 DSPi - US (PP-1, SR-1, TC-1 & RTB)

Configured with options

The 860 DSPi is a handheld spectrum analyzer with US DOCSIS 3.0 (8x4) modem that provides all of the testing power needed to ensure HFC networks operate to high standards. This includes balancing of the distribution system, maintaining analog and digital signal quality and controlling return path ingress. Standard Testing Features: 6 MHz Channel Spacing, Return Spectrum Analysis (4 to 65 MHz), Forward Spectrum Analysis (4 to 1000 MHz), Level Measurement, C/N Measurement, QAM Measurement (Level/MER/BER), Channel Plan Scan with Tilt Measurement, Ping, Trace Route, VoIP, Throughput, Cable Modem Statistics, Analog HUM, Depth of Modulation, CSO/CTB, FM Deviation, Sweepless Sweep, Line Viewer and QAM Source. Standard Communication Features: RF Test Port (F-Type, Replaceable), US DOCSIS 3.0 Modem 8x4 (100/304 MBPS), RJ45 Electrical Ethernet Port (10/100MBPS), CM to RJ-45 Mode. The complete kit includes: 860 DSPi Meter, Protective Carrying Case, Shoulder Strap, US AC Power Cable and AC to DC Power Adapter & Battery Charger. Configured with: Power Pack (PP-1), Return Sweep Receiver (SR-1), TraffiControl (TC-1) and Return Transmitter Board (RTB) Options
860 DSPi Field Analyzer

860 DSPi - US (PP-1, VP-1, TC-1 & RTB)

Configured with options

The 860 DSPi is a handheld spectrum analyzer with US DOCSIS 3.0 (8x4) modem that provides all of the testing power needed to ensure HFC networks operate to high standards. This includes balancing of the distribution system, maintaining analog and digital signal quality and controlling return path ingress. Standard Testing Features: 6 MHz Channel Spacing, Return Spectrum Analysis (4 to 65 MHz), Forward Spectrum Analysis (4 to 1000 MHz), Level Measurement, C/N Measurement, QAM Measurement (Level/MER/BER), Channel Plan Scan with Tilt Measurement, Ping, Trace Route, VoIP, Throughput, Cable Modem Statistics, Analog HUM, Depth of Modulation, CSO/CTB, FM Deviation, Sweepless Sweep, Line Viewer and QAM Source. Standard Communication Features: RF Test Port (F-Type, Replaceable), US DOCSIS 3.0 Modem 8x4 (100/304 MBPS), RJ45 Electrical Ethernet Port (10/100MBPS), CM to RJ-45 Mode. The complete kit includes: 860 DSPi Meter, Protective Carrying Case, Shoulder Strap, US AC Power Cable and AC to DC Power Adapter & Battery Charger. Configured with: Power Pack (PP-1), Return Tester RSVP (VP-1), TraffiControl (TC-1) and Return Transmitter Board (RTB) Options
860 DSPi Field Analyzer

860 DSPi - US (PP-1, SR-1, VP-1, TC-1 & RTB)

Configured with options

The 860 DSPi is a handheld spectrum analyzer with US DOCSIS 3.0 (8x4) modem that provides all of the testing power needed to ensure HFC networks operate to high standards. This includes balancing of the distribution system, maintaining analog and digital signal quality and controlling return path ingress. Standard Testing Features: 6 MHz Channel Spacing, Return Spectrum Analysis (4 to 65 MHz), Forward Spectrum Analysis (4 to 1000 MHz), Level Measurement, C/N Measurement, QAM Measurement (Level/MER/BER), Channel Plan Scan with Tilt Measurement, Ping, Trace Route, VoIP, Throughput, Cable Modem Statistics, Analog HUM, Depth of Modulation, CSO/CTB, FM Deviation, Sweepless Sweep, Line Viewer and QAM Source. Standard Communication Features: RF Test Port (F-Type, Replaceable), US DOCSIS 3.0 Modem 8x4 (100/304 MBPS), RJ45 Electrical Ethernet Port (10/100MBPS), CM to RJ-45 Mode. The complete kit includes: 860 DSPi Meter, Protective Carrying Case, Shoulder Strap, US AC Power Cable and AC to DC Power Adapter & Battery Charger. Configured with: Power Pack (PP-1), Return Sweep Receiver (SR-1), Return Tester RSVP (VP-1), TraffiControl (TC-1) and Return Transmitter Board (RTB) Options
860 DSPi Field Analyzer

860 DSPi - US (PP-1, SA-1 & TC-1)

Configured with options

The 860 DSPi is a handheld spectrum analyzer with US DOCSIS 3.0 (8x4) modem that provides all of the testing power needed to ensure HFC networks operate to high standards. This includes balancing of the distribution system, maintaining analog and digital signal quality and controlling return path ingress. Standard Testing Features: 6 MHz Channel Spacing, Return Spectrum Analysis (4 to 65 MHz), Forward Spectrum Analysis (4 to 1000 MHz), Level Measurement, C/N Measurement, QAM Measurement (Level/MER/BER), Channel Plan Scan with Tilt Measurement, Ping, Trace Route, VoIP, Throughput, Cable Modem Statistics, Analog HUM, Depth of Modulation, CSO/CTB, FM Deviation, Sweepless Sweep, Line Viewer and QAM Source. Standard Communication Features: RF Test Port (F-Type, Replaceable), US DOCSIS 3.0 Modem 8x4 (100/304 MBPS), RJ45 Electrical Ethernet Port (10/100MBPS), CM to RJ-45 Mode. The complete kit includes: 860 DSPi Meter, Protective Carrying Case, Shoulder Strap, US AC Power Cable and AC to DC Power Adapter & Battery Charger. Configured with: Power Pack (PP-1), Spectrum Analyzer (SA-1) and TraffiControl (TC-1) Options
860 DSPi Field Analyzer

860 DSPi - US (PP-1, SR-1, SA-1, TC-1 & RTB)

Configured with options

The 860 DSPi is a handheld spectrum analyzer with US DOCSIS 3.0 (8x4) modem that provides all of the testing power needed to ensure HFC networks operate to high standards. This includes balancing of the distribution system, maintaining analog and digital signal quality and controlling return path ingress. Standard Testing Features: 6 MHz Channel Spacing, Return Spectrum Analysis (4 to 65 MHz), Forward Spectrum Analysis (4 to 1000 MHz), Level Measurement, C/N Measurement, QAM Measurement (Level/MER/BER), Channel Plan Scan with Tilt Measurement, Ping, Trace Route, VoIP, Throughput, Cable Modem Statistics, Analog HUM, Depth of Modulation, CSO/CTB, FM Deviation, Sweepless Sweep, Line Viewer and QAM Source. Standard Communication Features: RF Test Port (F-Type, Replaceable), US DOCSIS 3.0 Modem 8x4 (100/304 MBPS), RJ45 Electrical Ethernet Port (10/100MBPS), CM to RJ-45 Mode. The complete kit includes: 860 DSPi Meter, Protective Carrying Case, Shoulder Strap, US AC Power Cable and AC to DC Power Adapter & Battery Charger. Configured with: Power Pack (PP-1), Return Sweep Receiver (SR-1), Spectrum Analyzer (SA-1), TraffiControl (TC-1) and Return Transmitter Board (RTB) Options
860 DSPi Field Analyzer

860 DSPi - US (PP-1, VP-1, SA-1, TC-1 & RTB)

Configured with options

The 860 DSPi is a handheld spectrum analyzer with US DOCSIS 3.0 (8x4) modem that provides all of the testing power needed to ensure HFC networks operate to high standards. This includes balancing of the distribution system, maintaining analog and digital signal quality and controlling return path ingress. Standard Testing Features: 6 MHz Channel Spacing, Return Spectrum Analysis (4 to 65 MHz), Forward Spectrum Analysis (4 to 1000 MHz), Level Measurement, C/N Measurement, QAM Measurement (Level/MER/BER), Channel Plan Scan with Tilt Measurement, Ping, Trace Route, VoIP, Throughput, Cable Modem Statistics, Analog HUM, Depth of Modulation, CSO/CTB, FM Deviation, Sweepless Sweep, Line Viewer and QAM Source. Standard Communication Features: RF Test Port (F-Type, Replaceable), US DOCSIS 3.0 Modem 8x4 (100/304 MBPS), RJ45 Electrical Ethernet Port (10/100MBPS), CM to RJ-45 Mode. The complete kit includes: 860 DSPi Meter, Protective Carrying Case, Shoulder Strap, US AC Power Cable and AC to DC Power Adapter & Battery Charger. Configured with: Power Pack (PP-1), Return Tester RSVP (VP-1), Spectrum Analyzer (SA-1), TraffiControl (TC-1) and Return Transmitter Board (RTB) Options
860 DSPi Field Analyzer

860 DSPi - US (PP-1, SR-1, VP-1, SA-1, TC-1 & RTB)

Configured with options

The 860 DSPi is a handheld spectrum analyzer with US DOCSIS 3.0 (8x4) modem that provides all of the testing power needed to ensure HFC networks operate to high standards. This includes balancing of the distribution system, maintaining analog and digital signal quality and controlling return path ingress. Standard Testing Features: 6 MHz Channel Spacing, Return Spectrum Analysis (4 to 65 MHz), Forward Spectrum Analysis (4 to 1000 MHz), Level Measurement, C/N Measurement, QAM Measurement (Level/MER/BER), Channel Plan Scan with Tilt Measurement, Ping, Trace Route, VoIP, Throughput, Cable Modem Statistics, Analog HUM, Depth of Modulation, CSO/CTB, FM Deviation, Sweepless Sweep, Line Viewer and QAM Source. Standard Communication Features: RF Test Port (F-Type, Replaceable), US DOCSIS 3.0 Modem 8x4 (100/304 MBPS), RJ45 Electrical Ethernet Port (10/100MBPS), CM to RJ-45 Mode. The complete kit includes: 860 DSPi Meter, Protective Carrying Case, Shoulder Strap, US AC Power Cable and AC to DC Power Adapter & Battery Charger. Configured with: Power Pack (PP-1), Return Sweep Receiver (SR-1), Return Tester RSVP (VP-1), Spectrum Analyzer (SA-1), TraffiControl (TC-1) and Return Transmitter Board (RTB) Options
860 DSPi Field Analyzer

860 DSPi - US (PP-1, QA-2 & TC-1)

Configured with options

The 860 DSPi is a handheld spectrum analyzer with US DOCSIS 3.0 (8x4) modem that provides all of the testing power needed to ensure HFC networks operate to high standards. This includes balancing of the distribution system, maintaining analog and digital signal quality and controlling return path ingress. Standard Testing Features: 6 MHz Channel Spacing, Return Spectrum Analysis (4 to 65 MHz), Forward Spectrum Analysis (4 to 1000 MHz), Level Measurement, C/N Measurement, QAM Measurement (Level/MER/BER), Channel Plan Scan with Tilt Measurement, Ping, Trace Route, VoIP, Throughput, Cable Modem Statistics, Analog HUM, Depth of Modulation, CSO/CTB, FM Deviation, Sweepless Sweep, Line Viewer and QAM Source. Standard Communication Features: RF Test Port (F-Type, Replaceable), US DOCSIS 3.0 Modem 8x4 (100/304 MBPS), RJ45 Electrical Ethernet Port (10/100MBPS), CM to RJ-45 Mode. The complete kit includes: 860 DSPi Meter, Protective Carrying Case, Shoulder Strap, US AC Power Cable and AC to DC Power Adapter & Battery Charger. Configured with: Power Pack (PP-1), QAM (QA-2) and TraffiControl (TC-1) Options
860 DSPi Field Analyzer

860 DSPi - US (PP-1, SR-1, QA-2, TC-1 & RTB)

Configured with options

The 860 DSPi is a handheld spectrum analyzer with US DOCSIS 3.0 (8x4) modem that provides all of the testing power needed to ensure HFC networks operate to high standards. This includes balancing of the distribution system, maintaining analog and digital signal quality and controlling return path ingress. Standard Testing Features: 6 MHz Channel Spacing, Return Spectrum Analysis (4 to 65 MHz), Forward Spectrum Analysis (4 to 1000 MHz), Level Measurement, C/N Measurement, QAM Measurement (Level/MER/BER), Channel Plan Scan with Tilt Measurement, Ping, Trace Route, VoIP, Throughput, Cable Modem Statistics, Analog HUM, Depth of Modulation, CSO/CTB, FM Deviation, Sweepless Sweep, Line Viewer and QAM Source. Standard Communication Features: RF Test Port (F-Type, Replaceable), US DOCSIS 3.0 Modem 8x4 (100/304 MBPS), RJ45 Electrical Ethernet Port (10/100MBPS), CM to RJ-45 Mode. The complete kit includes: 860 DSPi Meter, Protective Carrying Case, Shoulder Strap, US AC Power Cable and AC to DC Power Adapter & Battery Charger. Configured with: Power Pack (PP-1), Return Sweep Receiver (SR-1), QAM (QA-2), TraffiControl (TC-1) and Return Transmitter Board (RTB) Options
860 DSPi Field Analyzer

860 DSPi - US (PP-1, VP-1, QA-2, TC-1 & RTB)

Configured with options

The 860 DSPi is a handheld spectrum analyzer with US DOCSIS 3.0 (8x4) modem that provides all of the testing power needed to ensure HFC networks operate to high standards. This includes balancing of the distribution system, maintaining analog and digital signal quality and controlling return path ingress. Standard Testing Features: 6 MHz Channel Spacing, Return Spectrum Analysis (4 to 65 MHz), Forward Spectrum Analysis (4 to 1000 MHz), Level Measurement, C/N Measurement, QAM Measurement (Level/MER/BER), Channel Plan Scan with Tilt Measurement, Ping, Trace Route, VoIP, Throughput, Cable Modem Statistics, Analog HUM, Depth of Modulation, CSO/CTB, FM Deviation, Sweepless Sweep, Line Viewer and QAM Source. Standard Communication Features: RF Test Port (F-Type, Replaceable), US DOCSIS 3.0 Modem 8x4 (100/304 MBPS), RJ45 Electrical Ethernet Port (10/100MBPS), CM to RJ-45 Mode. The complete kit includes: 860 DSPi Meter, Protective Carrying Case, Shoulder Strap, US AC Power Cable and AC to DC Power Adapter & Battery Charger. Configured with: Power Pack (PP-1), Return Tester RSVP (VP-1), QAM (QA-2), TraffiControl (TC-1) and Return Transmitter Board (RTB) Options
860 DSPi Field Analyzer

860 DSPi - US (PP-1, SR-1, VP-1, QA-2, TC-1 & RTB)

Configured with options

The 860 DSPi is a handheld spectrum analyzer with US DOCSIS 3.0 (8x4) modem that provides all of the testing power needed to ensure HFC networks operate to high standards. This includes balancing of the distribution system, maintaining analog and digital signal quality and controlling return path ingress. Standard Testing Features: 6 MHz Channel Spacing, Return Spectrum Analysis (4 to 65 MHz), Forward Spectrum Analysis (4 to 1000 MHz), Level Measurement, C/N Measurement, QAM Measurement (Level/MER/BER), Channel Plan Scan with Tilt Measurement, Ping, Trace Route, VoIP, Throughput, Cable Modem Statistics, Analog HUM, Depth of Modulation, CSO/CTB, FM Deviation, Sweepless Sweep, Line Viewer and QAM Source. Standard Communication Features: RF Test Port (F-Type, Replaceable), US DOCSIS 3.0 Modem 8x4 (100/304 MBPS), RJ45 Electrical Ethernet Port (10/100MBPS), CM to RJ-45 Mode. The complete kit includes: 860 DSPi Meter, Protective Carrying Case, Shoulder Strap, US AC Power Cable and AC to DC Power Adapter & Battery Charger. Configured with: Power Pack (PP-1), Return Sweep Receiver (SR-1), Return Tester RSVP (VP-1), QAM (QA-2), TraffiControl (TC-1) and Return Transmitter Board (RTB) Options
860 DSPi Field Analyzer

860 DSPi - US (PP-1, SA-1, QA-2 & TC-1)

Configured with options

The 860 DSPi is a handheld spectrum analyzer with US DOCSIS 3.0 (8x4) modem that provides all of the testing power needed to ensure HFC networks operate to high standards. This includes balancing of the distribution system, maintaining analog and digital signal quality and controlling return path ingress. Standard Testing Features: 6 MHz Channel Spacing, Return Spectrum Analysis (4 to 65 MHz), Forward Spectrum Analysis (4 to 1000 MHz), Level Measurement, C/N Measurement, QAM Measurement (Level/MER/BER), Channel Plan Scan with Tilt Measurement, Ping, Trace Route, VoIP, Throughput, Cable Modem Statistics, Analog HUM, Depth of Modulation, CSO/CTB, FM Deviation, Sweepless Sweep, Line Viewer and QAM Source. Standard Communication Features: RF Test Port (F-Type, Replaceable), US DOCSIS 3.0 Modem 8x4 (100/304 MBPS), RJ45 Electrical Ethernet Port (10/100MBPS), CM to RJ-45 Mode. The complete kit includes: 860 DSPi Meter, Protective Carrying Case, Shoulder Strap, US AC Power Cable and AC to DC Power Adapter & Battery Charger. Configured with: Power Pack (PP-1), Spectrum Analyzer (SA-1), QAM (QA-2) and TraffiControl (TC-1) Options
860 DSPi Field Analyzer

860 DSPi - US (PP-1, SR-1, SA-1, QA-2, TC-1 & RTB)

Configured with options

The 860 DSPi is a handheld spectrum analyzer with US DOCSIS 3.0 (8x4) modem that provides all of the testing power needed to ensure HFC networks operate to high standards. This includes balancing of the distribution system, maintaining analog and digital signal quality and controlling return path ingress. Standard Testing Features: 6 MHz Channel Spacing, Return Spectrum Analysis (4 to 65 MHz), Forward Spectrum Analysis (4 to 1000 MHz), Level Measurement, C/N Measurement, QAM Measurement (Level/MER/BER), Channel Plan Scan with Tilt Measurement, Ping, Trace Route, VoIP, Throughput, Cable Modem Statistics, Analog HUM, Depth of Modulation, CSO/CTB, FM Deviation, Sweepless Sweep, Line Viewer and QAM Source. Standard Communication Features: RF Test Port (F-Type, Replaceable), US DOCSIS 3.0 Modem 8x4 (100/304 MBPS), RJ45 Electrical Ethernet Port (10/100MBPS), CM to RJ-45 Mode. The complete kit includes: 860 DSPi Meter, Protective Carrying Case, Shoulder Strap, US AC Power Cable and AC to DC Power Adapter & Battery Charger. Configured with: Power Pack (PP-1), Return Sweep Receiver (SR-1), Spectrum Analyzer (SA-1), QAM (QA-2), TraffiControl (TC-1) and Return Transmitter Board (RTB) Options
860 DSPi Field Analyzer

860 DSPi - US (PP-1, VP-1, SA-1, QA-2, TC-1 & RTB)

Configured with options

The 860 DSPi is a handheld spectrum analyzer with US DOCSIS 3.0 (8x4) modem that provides all of the testing power needed to ensure HFC networks operate to high standards. This includes balancing of the distribution system, maintaining analog and digital signal quality and controlling return path ingress. Standard Testing Features: 6 MHz Channel Spacing, Return Spectrum Analysis (4 to 65 MHz), Forward Spectrum Analysis (4 to 1000 MHz), Level Measurement, C/N Measurement, QAM Measurement (Level/MER/BER), Channel Plan Scan with Tilt Measurement, Ping, Trace Route, VoIP, Throughput, Cable Modem Statistics, Analog HUM, Depth of Modulation, CSO/CTB, FM Deviation, Sweepless Sweep, Line Viewer and QAM Source. Standard Communication Features: RF Test Port (F-Type, Replaceable), US DOCSIS 3.0 Modem 8x4 (100/304 MBPS), RJ45 Electrical Ethernet Port (10/100MBPS), CM to RJ-45 Mode. The complete kit includes: 860 DSPi Meter, Protective Carrying Case, Shoulder Strap, US AC Power Cable and AC to DC Power Adapter & Battery Charger. Configured with: Power Pack (PP-1), Return Tester RSVP (VP-1), Spectrum Analyzer (SA-1), QAM (QA-2), TraffiControl (TC-1) and Return Transmitter Board (RTB) Options
860 DSPi Field Analyzer

860 DSPi - US (PP-1, SR-1, VP-1, SA-1, QA-2, TC-1 & RTB)

Configured with options

The 860 DSPi is a handheld spectrum analyzer with US DOCSIS 3.0 (8x4) modem that provides all of the testing power needed to ensure HFC networks operate to high standards. This includes balancing of the distribution system, maintaining analog and digital signal quality and controlling return path ingress. Standard Testing Features: 6 MHz Channel Spacing, Return Spectrum Analysis (4 to 65 MHz), Forward Spectrum Analysis (4 to 1000 MHz), Level Measurement, C/N Measurement, QAM Measurement (Level/MER/BER), Channel Plan Scan with Tilt Measurement, Ping, Trace Route, VoIP, Throughput, Cable Modem Statistics, Analog HUM, Depth of Modulation, CSO/CTB, FM Deviation, Sweepless Sweep, Line Viewer and QAM Source. Standard Communication Features: RF Test Port (F-Type, Replaceable), US DOCSIS 3.0 Modem 8x4 (100/304 MBPS), RJ45 Electrical Ethernet Port (10/100MBPS), CM to RJ-45 Mode. The complete kit includes: 860 DSPi Meter, Protective Carrying Case, Shoulder Strap, US AC Power Cable and AC to DC Power Adapter & Battery Charger. Configured with: Power Pack (PP-1), Return Sweep Receiver (SR-1), Return Tester RSVP (VP-1), Spectrum Analyzer (SA-1), QAM (QA-2), TraffiControl (TC-1) and Return Transmitter Board (RTB) Options
860 DSPi Field Analyzer

860 DSPi - US (PP-1, VSB & TC-1)

Configured with options

The 860 DSPi is a handheld spectrum analyzer with US DOCSIS 3.0 (8x4) modem that provides all of the testing power needed to ensure HFC networks operate to high standards. This includes balancing of the distribution system, maintaining analog and digital signal quality and controlling return path ingress. Standard Testing Features: 6 MHz Channel Spacing, Return Spectrum Analysis (4 to 65 MHz), Forward Spectrum Analysis (4 to 1000 MHz), Level Measurement, C/N Measurement, QAM Measurement (Level/MER/BER), Channel Plan Scan with Tilt Measurement, Ping, Trace Route, VoIP, Throughput, Cable Modem Statistics, Analog HUM, Depth of Modulation, CSO/CTB, FM Deviation, Sweepless Sweep, Line Viewer and QAM Source. Standard Communication Features: RF Test Port (F-Type, Replaceable), US DOCSIS 3.0 Modem 8x4 (100/304 MBPS), RJ45 Electrical Ethernet Port (10/100MBPS), CM to RJ-45 Mode. The complete kit includes: 860 DSPi Meter, Protective Carrying Case, Shoulder Strap, US AC Power Cable and AC to DC Power Adapter & Battery Charger. Configured with: Power Pack (PP-1), Vestigial Side Band Modulation (VSB) and TraffiControl (TC-1) Options
860 DSPi Field Analyzer

860 DSPi - US (PP-1, SR-1, VSB, TC-1 & RTB)

Configured with options

The 860 DSPi is a handheld spectrum analyzer with US DOCSIS 3.0 (8x4) modem that provides all of the testing power needed to ensure HFC networks operate to high standards. This includes balancing of the distribution system, maintaining analog and digital signal quality and controlling return path ingress. Standard Testing Features: 6 MHz Channel Spacing, Return Spectrum Analysis (4 to 65 MHz), Forward Spectrum Analysis (4 to 1000 MHz), Level Measurement, C/N Measurement, QAM Measurement (Level/MER/BER), Channel Plan Scan with Tilt Measurement, Ping, Trace Route, VoIP, Throughput, Cable Modem Statistics, Analog HUM, Depth of Modulation, CSO/CTB, FM Deviation, Sweepless Sweep, Line Viewer and QAM Source. Standard Communication Features: RF Test Port (F-Type, Replaceable), US DOCSIS 3.0 Modem 8x4 (100/304 MBPS), RJ45 Electrical Ethernet Port (10/100MBPS), CM to RJ-45 Mode. The complete kit includes: 860 DSPi Meter, Protective Carrying Case, Shoulder Strap, US AC Power Cable and AC to DC Power Adapter & Battery Charger. Configured with: Power Pack (PP-1), Return Sweep Receiver (SR-1), Vestigial Side Band Modulation (VSB), TraffiControl (TC-1) and Return Transmitter Board (RTB) Options
860 DSPi Field Analyzer

860 DSPi - US (PP-1, VP-1, VSB, TC-1 & RTB)

Configured with options

The 860 DSPi is a handheld spectrum analyzer with US DOCSIS 3.0 (8x4) modem that provides all of the testing power needed to ensure HFC networks operate to high standards. This includes balancing of the distribution system, maintaining analog and digital signal quality and controlling return path ingress. Standard Testing Features: 6 MHz Channel Spacing, Return Spectrum Analysis (4 to 65 MHz), Forward Spectrum Analysis (4 to 1000 MHz), Level Measurement, C/N Measurement, QAM Measurement (Level/MER/BER), Channel Plan Scan with Tilt Measurement, Ping, Trace Route, VoIP, Throughput, Cable Modem Statistics, Analog HUM, Depth of Modulation, CSO/CTB, FM Deviation, Sweepless Sweep, Line Viewer and QAM Source. Standard Communication Features: RF Test Port (F-Type, Replaceable), US DOCSIS 3.0 Modem 8x4 (100/304 MBPS), RJ45 Electrical Ethernet Port (10/100MBPS), CM to RJ-45 Mode. The complete kit includes: 860 DSPi Meter, Protective Carrying Case, Shoulder Strap, US AC Power Cable and AC to DC Power Adapter & Battery Charger. Configured with: Power Pack (PP-1), Return Tester RSVP (VP-1), Vestigial Side Band Modulation (VSB), TraffiControl (TC-1) and Return Transmitter Board (RTB) Options
860 DSPi Field Analyzer

860 DSPi - US (PP-1, SR-1, VP-1, VSB, TC-1 & RTB)

Configured with options

The 860 DSPi is a handheld spectrum analyzer with US DOCSIS 3.0 (8x4) modem that provides all of the testing power needed to ensure HFC networks operate to high standards. This includes balancing of the distribution system, maintaining analog and digital signal quality and controlling return path ingress. Standard Testing Features: 6 MHz Channel Spacing, Return Spectrum Analysis (4 to 65 MHz), Forward Spectrum Analysis (4 to 1000 MHz), Level Measurement, C/N Measurement, QAM Measurement (Level/MER/BER), Channel Plan Scan with Tilt Measurement, Ping, Trace Route, VoIP, Throughput, Cable Modem Statistics, Analog HUM, Depth of Modulation, CSO/CTB, FM Deviation, Sweepless Sweep, Line Viewer and QAM Source. Standard Communication Features: RF Test Port (F-Type, Replaceable), US DOCSIS 3.0 Modem 8x4 (100/304 MBPS), RJ45 Electrical Ethernet Port (10/100MBPS), CM to RJ-45 Mode. The complete kit includes: 860 DSPi Meter, Protective Carrying Case, Shoulder Strap, US AC Power Cable and AC to DC Power Adapter & Battery Charger. Configured with: Power Pack (PP-1), Return Sweep Receiver (SR-1), Return Tester RSVP (VP-1), Vestigial Side Band Modulation (VSB), TraffiControl (TC-1) and Return Transmitter Board (RTB) Options
860 DSPi Field Analyzer

860 DSPi - US (PP-1, SA-1, VSB & TC-1)

Configured with options

The 860 DSPi is a handheld spectrum analyzer with US DOCSIS 3.0 (8x4) modem that provides all of the testing power needed to ensure HFC networks operate to high standards. This includes balancing of the distribution system, maintaining analog and digital signal quality and controlling return path ingress. Standard Testing Features: 6 MHz Channel Spacing, Return Spectrum Analysis (4 to 65 MHz), Forward Spectrum Analysis (4 to 1000 MHz), Level Measurement, C/N Measurement, QAM Measurement (Level/MER/BER), Channel Plan Scan with Tilt Measurement, Ping, Trace Route, VoIP, Throughput, Cable Modem Statistics, Analog HUM, Depth of Modulation, CSO/CTB, FM Deviation, Sweepless Sweep, Line Viewer and QAM Source. Standard Communication Features: RF Test Port (F-Type, Replaceable), US DOCSIS 3.0 Modem 8x4 (100/304 MBPS), RJ45 Electrical Ethernet Port (10/100MBPS), CM to RJ-45 Mode. The complete kit includes: 860 DSPi Meter, Protective Carrying Case, Shoulder Strap, US AC Power Cable and AC to DC Power Adapter & Battery Charger. Configured with: Power Pack (PP-1), Spectrum Analyzer (SA-1), Vestigial Side Band Modulation (VSB) and TraffiControl (TC-1) Options
860 DSPi Field Analyzer

860 DSPi - US (PP-1, SR-1, SA-1, VSB, TC-1 & RTB)

Configured with options

The 860 DSPi is a handheld spectrum analyzer with US DOCSIS 3.0 (8x4) modem that provides all of the testing power needed to ensure HFC networks operate to high standards. This includes balancing of the distribution system, maintaining analog and digital signal quality and controlling return path ingress. Standard Testing Features: 6 MHz Channel Spacing, Return Spectrum Analysis (4 to 65 MHz), Forward Spectrum Analysis (4 to 1000 MHz), Level Measurement, C/N Measurement, QAM Measurement (Level/MER/BER), Channel Plan Scan with Tilt Measurement, Ping, Trace Route, VoIP, Throughput, Cable Modem Statistics, Analog HUM, Depth of Modulation, CSO/CTB, FM Deviation, Sweepless Sweep, Line Viewer and QAM Source. Standard Communication Features: RF Test Port (F-Type, Replaceable), US DOCSIS 3.0 Modem 8x4 (100/304 MBPS), RJ45 Electrical Ethernet Port (10/100MBPS), CM to RJ-45 Mode. The complete kit includes: 860 DSPi Meter, Protective Carrying Case, Shoulder Strap, US AC Power Cable and AC to DC Power Adapter & Battery Charger. Configured with: Power Pack (PP-1), Return Sweep Receiver (SR-1), Spectrum Analyzer (SA-1), Vestigial Side Band Modulation (VSB), TraffiControl (TC-1) and Return Transmitter Board (RTB) Options
860 DSPi Field Analyzer

860 DSPi - US (PP-1, VP-1, SA-1, VSB, TC-1 & RTB)

Configured with options

The 860 DSPi is a handheld spectrum analyzer with US DOCSIS 3.0 (8x4) modem that provides all of the testing power needed to ensure HFC networks operate to high standards. This includes balancing of the distribution system, maintaining analog and digital signal quality and controlling return path ingress. Standard Testing Features: 6 MHz Channel Spacing, Return Spectrum Analysis (4 to 65 MHz), Forward Spectrum Analysis (4 to 1000 MHz), Level Measurement, C/N Measurement, QAM Measurement (Level/MER/BER), Channel Plan Scan with Tilt Measurement, Ping, Trace Route, VoIP, Throughput, Cable Modem Statistics, Analog HUM, Depth of Modulation, CSO/CTB, FM Deviation, Sweepless Sweep, Line Viewer and QAM Source. Standard Communication Features: RF Test Port (F-Type, Replaceable), US DOCSIS 3.0 Modem 8x4 (100/304 MBPS), RJ45 Electrical Ethernet Port (10/100MBPS), CM to RJ-45 Mode. The complete kit includes: 860 DSPi Meter, Protective Carrying Case, Shoulder Strap, US AC Power Cable and AC to DC Power Adapter & Battery Charger. Configured with: Power Pack (PP-1), Return Tester RSVP (VP-1), Spectrum Analyzer (SA-1), Vestigial Side Band Modulation (VSB), TraffiControl (TC-1) and Return Transmitter Board (RTB) Options
860 DSPi Field Analyzer

860 DSPi - US (PP-1, SR-1, VP-1, SA-1, VSB, TC-1 & RTB)

Configured with options

The 860 DSPi is a handheld spectrum analyzer with US DOCSIS 3.0 (8x4) modem that provides all of the testing power needed to ensure HFC networks operate to high standards. This includes balancing of the distribution system, maintaining analog and digital signal quality and controlling return path ingress. Standard Testing Features: 6 MHz Channel Spacing, Return Spectrum Analysis (4 to 65 MHz), Forward Spectrum Analysis (4 to 1000 MHz), Level Measurement, C/N Measurement, QAM Measurement (Level/MER/BER), Channel Plan Scan with Tilt Measurement, Ping, Trace Route, VoIP, Throughput, Cable Modem Statistics, Analog HUM, Depth of Modulation, CSO/CTB, FM Deviation, Sweepless Sweep, Line Viewer and QAM Source. Standard Communication Features: RF Test Port (F-Type, Replaceable), US DOCSIS 3.0 Modem 8x4 (100/304 MBPS), RJ45 Electrical Ethernet Port (10/100MBPS), CM to RJ-45 Mode. The complete kit includes: 860 DSPi Meter, Protective Carrying Case, Shoulder Strap, US AC Power Cable and AC to DC Power Adapter & Battery Charger. Configured with: Power Pack (PP-1), Return Sweep Receiver (SR-1), Return Tester RSVP (VP-1), Spectrum Analyzer (SA-1), Vestigial Side Band Modulation (VSB), TraffiControl (TC-1) and Return Transmitter Board (RTB) Options
860 DSPi Field Analyzer

860 DSPi - US (PP-1, QA-2, VSB & TC-1)

Configured with options

The 860 DSPi is a handheld spectrum analyzer with US DOCSIS 3.0 (8x4) modem that provides all of the testing power needed to ensure HFC networks operate to high standards. This includes balancing of the distribution system, maintaining analog and digital signal quality and controlling return path ingress. Standard Testing Features: 6 MHz Channel Spacing, Return Spectrum Analysis (4 to 65 MHz), Forward Spectrum Analysis (4 to 1000 MHz), Level Measurement, C/N Measurement, QAM Measurement (Level/MER/BER), Channel Plan Scan with Tilt Measurement, Ping, Trace Route, VoIP, Throughput, Cable Modem Statistics, Analog HUM, Depth of Modulation, CSO/CTB, FM Deviation, Sweepless Sweep, Line Viewer and QAM Source. Standard Communication Features: RF Test Port (F-Type, Replaceable), US DOCSIS 3.0 Modem 8x4 (100/304 MBPS), RJ45 Electrical Ethernet Port (10/100MBPS), CM to RJ-45 Mode. The complete kit includes: 860 DSPi Meter, Protective Carrying Case, Shoulder Strap, US AC Power Cable and AC to DC Power Adapter & Battery Charger. Configured with: Power Pack (PP-1), QAM (QA-2), Vestigial Side Band Modulation (VSB) and TraffiControl (TC-1) Options
860 DSPi Field Analyzer

860 DSPi - US (PP-1, SR-1, QA-2, VSB, TC-1 & RTB)

Configured with options

The 860 DSPi is a handheld spectrum analyzer with US DOCSIS 3.0 (8x4) modem that provides all of the testing power needed to ensure HFC networks operate to high standards. This includes balancing of the distribution system, maintaining analog and digital signal quality and controlling return path ingress. Standard Testing Features: 6 MHz Channel Spacing, Return Spectrum Analysis (4 to 65 MHz), Forward Spectrum Analysis (4 to 1000 MHz), Level Measurement, C/N Measurement, QAM Measurement (Level/MER/BER), Channel Plan Scan with Tilt Measurement, Ping, Trace Route, VoIP, Throughput, Cable Modem Statistics, Analog HUM, Depth of Modulation, CSO/CTB, FM Deviation, Sweepless Sweep, Line Viewer and QAM Source. Standard Communication Features: RF Test Port (F-Type, Replaceable), US DOCSIS 3.0 Modem 8x4 (100/304 MBPS), RJ45 Electrical Ethernet Port (10/100MBPS), CM to RJ-45 Mode. The complete kit includes: 860 DSPi Meter, Protective Carrying Case, Shoulder Strap, US AC Power Cable and AC to DC Power Adapter & Battery Charger. Configured with: Power Pack (PP-1), Return Sweep Receiver (SR-1), QAM (QA-2), Vestigial Side Band Modulation (VSB), TraffiControl (TC-1) and Return Transmitter Board (RTB) Options
860 DSPi Field Analyzer

860 DSPi - US (PP-1, VP-1, QA-2, VSB, TC-1 & RTB)

Configured with options

The 860 DSPi is a handheld spectrum analyzer with US DOCSIS 3.0 (8x4) modem that provides all of the testing power needed to ensure HFC networks operate to high standards. This includes balancing of the distribution system, maintaining analog and digital signal quality and controlling return path ingress. Standard Testing Features: 6 MHz Channel Spacing, Return Spectrum Analysis (4 to 65 MHz), Forward Spectrum Analysis (4 to 1000 MHz), Level Measurement, C/N Measurement, QAM Measurement (Level/MER/BER), Channel Plan Scan with Tilt Measurement, Ping, Trace Route, VoIP, Throughput, Cable Modem Statistics, Analog HUM, Depth of Modulation, CSO/CTB, FM Deviation, Sweepless Sweep, Line Viewer and QAM Source. Standard Communication Features: RF Test Port (F-Type, Replaceable), US DOCSIS 3.0 Modem 8x4 (100/304 MBPS), RJ45 Electrical Ethernet Port (10/100MBPS), CM to RJ-45 Mode. The complete kit includes: 860 DSPi Meter, Protective Carrying Case, Shoulder Strap, US AC Power Cable and AC to DC Power Adapter & Battery Charger. Configured with: Power Pack (PP-1), Return Tester RSVP (VP-1), QAM (QA-2), Vestigial Side Band Modulation (VSB), TraffiControl (TC-1) and Return Transmitter Board (RTB) Options
860 DSPi Field Analyzer

860 DSPi - US (PP-1, SR-1, VP-1, QA-2, VSB, TC-1 & RTB)

Configured with options

The 860 DSPi is a handheld spectrum analyzer with US DOCSIS 3.0 (8x4) modem that provides all of the testing power needed to ensure HFC networks operate to high standards. This includes balancing of the distribution system, maintaining analog and digital signal quality and controlling return path ingress. Standard Testing Features: 6 MHz Channel Spacing, Return Spectrum Analysis (4 to 65 MHz), Forward Spectrum Analysis (4 to 1000 MHz), Level Measurement, C/N Measurement, QAM Measurement (Level/MER/BER), Channel Plan Scan with Tilt Measurement, Ping, Trace Route, VoIP, Throughput, Cable Modem Statistics, Analog HUM, Depth of Modulation, CSO/CTB, FM Deviation, Sweepless Sweep, Line Viewer and QAM Source. Standard Communication Features: RF Test Port (F-Type, Replaceable), US DOCSIS 3.0 Modem 8x4 (100/304 MBPS), RJ45 Electrical Ethernet Port (10/100MBPS), CM to RJ-45 Mode. The complete kit includes: 860 DSPi Meter, Protective Carrying Case, Shoulder Strap, US AC Power Cable and AC to DC Power Adapter & Battery Charger. Configured with: Power Pack (PP-1), Return Sweep Receiver (SR-1), Return Tester RSVP (VP-1), QAM (QA-2), Vestigial Side Band Modulation (VSB), TraffiControl (TC-1) and Return Transmitter Board (RTB) Options
860 DSPi Field Analyzer

860 DSPi - US (PP-1, SA-1, QA-2, VSB & TC-1)

Configured with options

The 860 DSPi is a handheld spectrum analyzer with US DOCSIS 3.0 (8x4) modem that provides all of the testing power needed to ensure HFC networks operate to high standards. This includes balancing of the distribution system, maintaining analog and digital signal quality and controlling return path ingress. Standard Testing Features: 6 MHz Channel Spacing, Return Spectrum Analysis (4 to 65 MHz), Forward Spectrum Analysis (4 to 1000 MHz), Level Measurement, C/N Measurement, QAM Measurement (Level/MER/BER), Channel Plan Scan with Tilt Measurement, Ping, Trace Route, VoIP, Throughput, Cable Modem Statistics, Analog HUM, Depth of Modulation, CSO/CTB, FM Deviation, Sweepless Sweep, Line Viewer and QAM Source. Standard Communication Features: RF Test Port (F-Type, Replaceable), US DOCSIS 3.0 Modem 8x4 (100/304 MBPS), RJ45 Electrical Ethernet Port (10/100MBPS), CM to RJ-45 Mode. The complete kit includes: 860 DSPi Meter, Protective Carrying Case, Shoulder Strap, US AC Power Cable and AC to DC Power Adapter & Battery Charger. Configured with: Power Pack (PP-1), Spectrum Analyzer (SA-1), QAM (QA-2), Vestigial Side Band Modulation (VSB) and TraffiControl (TC-1) Options
860 DSPi Field Analyzer

860 DSPi - US (PP-1, SR-1, SA-1, QA-2, VSB, TC-1 & RTB)

Configured with options

The 860 DSPi is a handheld spectrum analyzer with US DOCSIS 3.0 (8x4) modem that provides all of the testing power needed to ensure HFC networks operate to high standards. This includes balancing of the distribution system, maintaining analog and digital signal quality and controlling return path ingress. Standard Testing Features: 6 MHz Channel Spacing, Return Spectrum Analysis (4 to 65 MHz), Forward Spectrum Analysis (4 to 1000 MHz), Level Measurement, C/N Measurement, QAM Measurement (Level/MER/BER), Channel Plan Scan with Tilt Measurement, Ping, Trace Route, VoIP, Throughput, Cable Modem Statistics, Analog HUM, Depth of Modulation, CSO/CTB, FM Deviation, Sweepless Sweep, Line Viewer and QAM Source. Standard Communication Features: RF Test Port (F-Type, Replaceable), US DOCSIS 3.0 Modem 8x4 (100/304 MBPS), RJ45 Electrical Ethernet Port (10/100MBPS), CM to RJ-45 Mode. The complete kit includes: 860 DSPi Meter, Protective Carrying Case, Shoulder Strap, US AC Power Cable and AC to DC Power Adapter & Battery Charger. Configured with: Power Pack (PP-1), Return Sweep Receiver (SR-1), Spectrum Analyzer (SA-1), QAM (QA-2), Vestigial Side Band Modulation (VSB), TraffiControl (TC-1) and Return Transmitter Board (RTB) Options
860 DSPi Field Analyzer

860 DSPi - US (PP-1, VP-1, SA-1, QA-2, VSB, TC-1 & RTB)

Configured with options

The 860 DSPi is a handheld spectrum analyzer with US DOCSIS 3.0 (8x4) modem that provides all of the testing power needed to ensure HFC networks operate to high standards. This includes balancing of the distribution system, maintaining analog and digital signal quality and controlling return path ingress. Standard Testing Features: 6 MHz Channel Spacing, Return Spectrum Analysis (4 to 65 MHz), Forward Spectrum Analysis (4 to 1000 MHz), Level Measurement, C/N Measurement, QAM Measurement (Level/MER/BER), Channel Plan Scan with Tilt Measurement, Ping, Trace Route, VoIP, Throughput, Cable Modem Statistics, Analog HUM, Depth of Modulation, CSO/CTB, FM Deviation, Sweepless Sweep, Line Viewer and QAM Source. Standard Communication Features: RF Test Port (F-Type, Replaceable), US DOCSIS 3.0 Modem 8x4 (100/304 MBPS), RJ45 Electrical Ethernet Port (10/100MBPS), CM to RJ-45 Mode. The complete kit includes: 860 DSPi Meter, Protective Carrying Case, Shoulder Strap, US AC Power Cable and AC to DC Power Adapter & Battery Charger. Configured with: Power Pack (PP-1), Return Tester RSVP (VP-1), Spectrum Analyzer (SA-1), QAM (QA-2), Vestigial Side Band Modulation (VSB), TraffiControl (TC-1) and Return Transmitter Board (RTB) Options
860 DSPi Field Analyzer

860 DSPi - US (PP-1, SR-1, VP-1, SA-1, QA-2, VSB, TC-1 & RTB)

Configured with options

The 860 DSPi is a handheld spectrum analyzer with US DOCSIS 3.0 (8x4) modem that provides all of the testing power needed to ensure HFC networks operate to high standards. This includes balancing of the distribution system, maintaining analog and digital signal quality and controlling return path ingress. Standard Testing Features: 6 MHz Channel Spacing, Return Spectrum Analysis (4 to 65 MHz), Forward Spectrum Analysis (4 to 1000 MHz), Level Measurement, C/N Measurement, QAM Measurement (Level/MER/BER), Channel Plan Scan with Tilt Measurement, Ping, Trace Route, VoIP, Throughput, Cable Modem Statistics, Analog HUM, Depth of Modulation, CSO/CTB, FM Deviation, Sweepless Sweep, Line Viewer and QAM Source. Standard Communication Features: RF Test Port (F-Type, Replaceable), US DOCSIS 3.0 Modem 8x4 (100/304 MBPS), RJ45 Electrical Ethernet Port (10/100MBPS), CM to RJ-45 Mode. The complete kit includes: 860 DSPi Meter, Protective Carrying Case, Shoulder Strap, US AC Power Cable and AC to DC Power Adapter & Battery Charger. Configured with: Power Pack (PP-1), Return Sweep Receiver (SR-1), Return Tester RSVP (VP-1), Spectrum Analyzer (SA-1), QAM (QA-2), Vestigial Side Band Modulation (VSB), TraffiControl (TC-1) and Return Transmitter Board (RTB) Options
860 DSPi Field Analyzer

860 DSPi - US (PP-1, FS-1 & TC-1)

Configured with options

The 860 DSPi is a handheld spectrum analyzer with US DOCSIS 3.0 (8x4) modem that provides all of the testing power needed to ensure HFC networks operate to high standards. This includes balancing of the distribution system, maintaining analog and digital signal quality and controlling return path ingress. Standard Testing Features: 6 MHz Channel Spacing, Return Spectrum Analysis (4 to 65 MHz), Forward Spectrum Analysis (4 to 1000 MHz), Level Measurement, C/N Measurement, QAM Measurement (Level/MER/BER), Channel Plan Scan with Tilt Measurement, Ping, Trace Route, VoIP, Throughput, Cable Modem Statistics, Analog HUM, Depth of Modulation, CSO/CTB, FM Deviation, Sweepless Sweep, Line Viewer and QAM Source. Standard Communication Features: RF Test Port (F-Type, Replaceable), US DOCSIS 3.0 Modem 8x4 (100/304 MBPS), RJ45 Electrical Ethernet Port (10/100MBPS), CM to RJ-45 Mode. The complete kit includes: 860 DSPi Meter, Protective Carrying Case, Shoulder Strap, US AC Power Cable and AC to DC Power Adapter & Battery Charger. Configured with: Power Pack (PP-1), Forward Sweep (FS-1) and TraffiControl (TC-1) Options
860 DSPi Field Analyzer

860 DSPi - US (PP-1, SR-1, FS-1, TC-1 & RTB)

Configured with options

The 860 DSPi is a handheld spectrum analyzer with US DOCSIS 3.0 (8x4) modem that provides all of the testing power needed to ensure HFC networks operate to high standards. This includes balancing of the distribution system, maintaining analog and digital signal quality and controlling return path ingress. Standard Testing Features: 6 MHz Channel Spacing, Return Spectrum Analysis (4 to 65 MHz), Forward Spectrum Analysis (4 to 1000 MHz), Level Measurement, C/N Measurement, QAM Measurement (Level/MER/BER), Channel Plan Scan with Tilt Measurement, Ping, Trace Route, VoIP, Throughput, Cable Modem Statistics, Analog HUM, Depth of Modulation, CSO/CTB, FM Deviation, Sweepless Sweep, Line Viewer and QAM Source. Standard Communication Features: RF Test Port (F-Type, Replaceable), US DOCSIS 3.0 Modem 8x4 (100/304 MBPS), RJ45 Electrical Ethernet Port (10/100MBPS), CM to RJ-45 Mode. The complete kit includes: 860 DSPi Meter, Protective Carrying Case, Shoulder Strap, US AC Power Cable and AC to DC Power Adapter & Battery Charger. Configured with: Power Pack (PP-1), Return Sweep Receiver (SR-1), Forward Sweep (FS-1), TraffiControl (TC-1) and Return Transmitter Board (RTB) Options
860 DSPi Field Analyzer

860 DSPi - US (PP-1, VP-1, FS-1, TC-1 & RTB)

Configured with options

The 860 DSPi is a handheld spectrum analyzer with US DOCSIS 3.0 (8x4) modem that provides all of the testing power needed to ensure HFC networks operate to high standards. This includes balancing of the distribution system, maintaining analog and digital signal quality and controlling return path ingress. Standard Testing Features: 6 MHz Channel Spacing, Return Spectrum Analysis (4 to 65 MHz), Forward Spectrum Analysis (4 to 1000 MHz), Level Measurement, C/N Measurement, QAM Measurement (Level/MER/BER), Channel Plan Scan with Tilt Measurement, Ping, Trace Route, VoIP, Throughput, Cable Modem Statistics, Analog HUM, Depth of Modulation, CSO/CTB, FM Deviation, Sweepless Sweep, Line Viewer and QAM Source. Standard Communication Features: RF Test Port (F-Type, Replaceable), US DOCSIS 3.0 Modem 8x4 (100/304 MBPS), RJ45 Electrical Ethernet Port (10/100MBPS), CM to RJ-45 Mode. The complete kit includes: 860 DSPi Meter, Protective Carrying Case, Shoulder Strap, US AC Power Cable and AC to DC Power Adapter & Battery Charger. Configured with: Power Pack (PP-1), Return Tester RSVP (VP-1), Forward Sweep (FS-1), TraffiControl (TC-1) and Return Transmitter Board (RTB) Options
860 DSPi Field Analyzer

860 DSPi - US (PP-1, SR-1, VP-1, FS-1, TC-1 & RTB)

Configured with options

The 860 DSPi is a handheld spectrum analyzer with US DOCSIS 3.0 (8x4) modem that provides all of the testing power needed to ensure HFC networks operate to high standards. This includes balancing of the distribution system, maintaining analog and digital signal quality and controlling return path ingress. Standard Testing Features: 6 MHz Channel Spacing, Return Spectrum Analysis (4 to 65 MHz), Forward Spectrum Analysis (4 to 1000 MHz), Level Measurement, C/N Measurement, QAM Measurement (Level/MER/BER), Channel Plan Scan with Tilt Measurement, Ping, Trace Route, VoIP, Throughput, Cable Modem Statistics, Analog HUM, Depth of Modulation, CSO/CTB, FM Deviation, Sweepless Sweep, Line Viewer and QAM Source. Standard Communication Features: RF Test Port (F-Type, Replaceable), US DOCSIS 3.0 Modem 8x4 (100/304 MBPS), RJ45 Electrical Ethernet Port (10/100MBPS), CM to RJ-45 Mode. The complete kit includes: 860 DSPi Meter, Protective Carrying Case, Shoulder Strap, US AC Power Cable and AC to DC Power Adapter & Battery Charger. Configured with: Power Pack (PP-1), Return Sweep Receiver (SR-1), Return Tester RSVP (VP-1), Forward Sweep (FS-1), TraffiControl (TC-1) and Return Transmitter Board (RTB) Options
860 DSPi Field Analyzer

860 DSPi - US (PP-1, SA-1, FS-1 & TC-1)

Configured with options

The 860 DSPi is a handheld spectrum analyzer with US DOCSIS 3.0 (8x4) modem that provides all of the testing power needed to ensure HFC networks operate to high standards. This includes balancing of the distribution system, maintaining analog and digital signal quality and controlling return path ingress. Standard Testing Features: 6 MHz Channel Spacing, Return Spectrum Analysis (4 to 65 MHz), Forward Spectrum Analysis (4 to 1000 MHz), Level Measurement, C/N Measurement, QAM Measurement (Level/MER/BER), Channel Plan Scan with Tilt Measurement, Ping, Trace Route, VoIP, Throughput, Cable Modem Statistics, Analog HUM, Depth of Modulation, CSO/CTB, FM Deviation, Sweepless Sweep, Line Viewer and QAM Source. Standard Communication Features: RF Test Port (F-Type, Replaceable), US DOCSIS 3.0 Modem 8x4 (100/304 MBPS), RJ45 Electrical Ethernet Port (10/100MBPS), CM to RJ-45 Mode. The complete kit includes: 860 DSPi Meter, Protective Carrying Case, Shoulder Strap, US AC Power Cable and AC to DC Power Adapter & Battery Charger. Configured with: Power Pack (PP-1), Spectrum Analyzer (SA-1), Forward Sweep (FS-1) and TraffiControl (TC-1) Options
860 DSPi Field Analyzer

860 DSPi - US (PP-1, SR-1, SA-1, FS-1, TC-1 & RTB)

Configured with options

The 860 DSPi is a handheld spectrum analyzer with US DOCSIS 3.0 (8x4) modem that provides all of the testing power needed to ensure HFC networks operate to high standards. This includes balancing of the distribution system, maintaining analog and digital signal quality and controlling return path ingress. Standard Testing Features: 6 MHz Channel Spacing, Return Spectrum Analysis (4 to 65 MHz), Forward Spectrum Analysis (4 to 1000 MHz), Level Measurement, C/N Measurement, QAM Measurement (Level/MER/BER), Channel Plan Scan with Tilt Measurement, Ping, Trace Route, VoIP, Throughput, Cable Modem Statistics, Analog HUM, Depth of Modulation, CSO/CTB, FM Deviation, Sweepless Sweep, Line Viewer and QAM Source. Standard Communication Features: RF Test Port (F-Type, Replaceable), US DOCSIS 3.0 Modem 8x4 (100/304 MBPS), RJ45 Electrical Ethernet Port (10/100MBPS), CM to RJ-45 Mode. The complete kit includes: 860 DSPi Meter, Protective Carrying Case, Shoulder Strap, US AC Power Cable and AC to DC Power Adapter & Battery Charger. Configured with: Power Pack (PP-1), Return Sweep Receiver (SR-1), Spectrum Analyzer (SA-1), Forward Sweep (FS-1), TraffiControl (TC-1) and Return Transmitter Board (RTB) Options
860 DSPi Field Analyzer

860 DSPi - US (PP-1, VP-1, SA-1, FS-1, TC-1 & RTB)

Configured with options

The 860 DSPi is a handheld spectrum analyzer with US DOCSIS 3.0 (8x4) modem that provides all of the testing power needed to ensure HFC networks operate to high standards. This includes balancing of the distribution system, maintaining analog and digital signal quality and controlling return path ingress. Standard Testing Features: 6 MHz Channel Spacing, Return Spectrum Analysis (4 to 65 MHz), Forward Spectrum Analysis (4 to 1000 MHz), Level Measurement, C/N Measurement, QAM Measurement (Level/MER/BER), Channel Plan Scan with Tilt Measurement, Ping, Trace Route, VoIP, Throughput, Cable Modem Statistics, Analog HUM, Depth of Modulation, CSO/CTB, FM Deviation, Sweepless Sweep, Line Viewer and QAM Source. Standard Communication Features: RF Test Port (F-Type, Replaceable), US DOCSIS 3.0 Modem 8x4 (100/304 MBPS), RJ45 Electrical Ethernet Port (10/100MBPS), CM to RJ-45 Mode. The complete kit includes: 860 DSPi Meter, Protective Carrying Case, Shoulder Strap, US AC Power Cable and AC to DC Power Adapter & Battery Charger. Configured with: Power Pack (PP-1), Return Tester RSVP (VP-1), Spectrum Analyzer (SA-1), Forward Sweep (FS-1), TraffiControl (TC-1) and Return Transmitter Board (RTB) Options
860 DSPi Field Analyzer

860 DSPi - US (PP-1, SR-1, VP-1, SA-1, FS-1, TC-1 & RTB)

Configured with options

The 860 DSPi is a handheld spectrum analyzer with US DOCSIS 3.0 (8x4) modem that provides all of the testing power needed to ensure HFC networks operate to high standards. This includes balancing of the distribution system, maintaining analog and digital signal quality and controlling return path ingress. Standard Testing Features: 6 MHz Channel Spacing, Return Spectrum Analysis (4 to 65 MHz), Forward Spectrum Analysis (4 to 1000 MHz), Level Measurement, C/N Measurement, QAM Measurement (Level/MER/BER), Channel Plan Scan with Tilt Measurement, Ping, Trace Route, VoIP, Throughput, Cable Modem Statistics, Analog HUM, Depth of Modulation, CSO/CTB, FM Deviation, Sweepless Sweep, Line Viewer and QAM Source. Standard Communication Features: RF Test Port (F-Type, Replaceable), US DOCSIS 3.0 Modem 8x4 (100/304 MBPS), RJ45 Electrical Ethernet Port (10/100MBPS), CM to RJ-45 Mode. The complete kit includes: 860 DSPi Meter, Protective Carrying Case, Shoulder Strap, US AC Power Cable and AC to DC Power Adapter & Battery Charger. Configured with: Power Pack (PP-1), Return Sweep Receiver (SR-1), Return Tester RSVP (VP-1), Spectrum Analyzer (SA-1), Forward Sweep (FS-1), TraffiControl (TC-1) and Return Transmitter Board (RTB) Options
860 DSPi Field Analyzer

860 DSPi - US (PP-1, QA-2, FS-1 & TC-1)

Configured with options

The 860 DSPi is a handheld spectrum analyzer with US DOCSIS 3.0 (8x4) modem that provides all of the testing power needed to ensure HFC networks operate to high standards. This includes balancing of the distribution system, maintaining analog and digital signal quality and controlling return path ingress. Standard Testing Features: 6 MHz Channel Spacing, Return Spectrum Analysis (4 to 65 MHz), Forward Spectrum Analysis (4 to 1000 MHz), Level Measurement, C/N Measurement, QAM Measurement (Level/MER/BER), Channel Plan Scan with Tilt Measurement, Ping, Trace Route, VoIP, Throughput, Cable Modem Statistics, Analog HUM, Depth of Modulation, CSO/CTB, FM Deviation, Sweepless Sweep, Line Viewer and QAM Source. Standard Communication Features: RF Test Port (F-Type, Replaceable), US DOCSIS 3.0 Modem 8x4 (100/304 MBPS), RJ45 Electrical Ethernet Port (10/100MBPS), CM to RJ-45 Mode. The complete kit includes: 860 DSPi Meter, Protective Carrying Case, Shoulder Strap, US AC Power Cable and AC to DC Power Adapter & Battery Charger. Configured with: Power Pack (PP-1), QAM (QA-2), Forward Sweep (FS-1) and TraffiControl (TC-1) Options
860 DSPi Field Analyzer

860 DSPi - US (PP-1, SR-1, QA-2, FS-1, TC-1 & RTB)

Configured with options

The 860 DSPi is a handheld spectrum analyzer with US DOCSIS 3.0 (8x4) modem that provides all of the testing power needed to ensure HFC networks operate to high standards. This includes balancing of the distribution system, maintaining analog and digital signal quality and controlling return path ingress. Standard Testing Features: 6 MHz Channel Spacing, Return Spectrum Analysis (4 to 65 MHz), Forward Spectrum Analysis (4 to 1000 MHz), Level Measurement, C/N Measurement, QAM Measurement (Level/MER/BER), Channel Plan Scan with Tilt Measurement, Ping, Trace Route, VoIP, Throughput, Cable Modem Statistics, Analog HUM, Depth of Modulation, CSO/CTB, FM Deviation, Sweepless Sweep, Line Viewer and QAM Source. Standard Communication Features: RF Test Port (F-Type, Replaceable), US DOCSIS 3.0 Modem 8x4 (100/304 MBPS), RJ45 Electrical Ethernet Port (10/100MBPS), CM to RJ-45 Mode. The complete kit includes: 860 DSPi Meter, Protective Carrying Case, Shoulder Strap, US AC Power Cable and AC to DC Power Adapter & Battery Charger. Configured with: Power Pack (PP-1), Return Sweep Receiver (SR-1), QAM (QA-2), Forward Sweep (FS-1), TraffiControl (TC-1) and Return Transmitter Board (RTB) Options
860 DSPi Field Analyzer

860 DSPi - US (PP-1, VP-1, QA-2, FS-1, TC-1 & RTB)

Configured with options

The 860 DSPi is a handheld spectrum analyzer with US DOCSIS 3.0 (8x4) modem that provides all of the testing power needed to ensure HFC networks operate to high standards. This includes balancing of the distribution system, maintaining analog and digital signal quality and controlling return path ingress. Standard Testing Features: 6 MHz Channel Spacing, Return Spectrum Analysis (4 to 65 MHz), Forward Spectrum Analysis (4 to 1000 MHz), Level Measurement, C/N Measurement, QAM Measurement (Level/MER/BER), Channel Plan Scan with Tilt Measurement, Ping, Trace Route, VoIP, Throughput, Cable Modem Statistics, Analog HUM, Depth of Modulation, CSO/CTB, FM Deviation, Sweepless Sweep, Line Viewer and QAM Source. Standard Communication Features: RF Test Port (F-Type, Replaceable), US DOCSIS 3.0 Modem 8x4 (100/304 MBPS), RJ45 Electrical Ethernet Port (10/100MBPS), CM to RJ-45 Mode. The complete kit includes: 860 DSPi Meter, Protective Carrying Case, Shoulder Strap, US AC Power Cable and AC to DC Power Adapter & Battery Charger. Configured with: Power Pack (PP-1), Return Tester RSVP (VP-1), QAM (QA-2), Forward Sweep (FS-1), TraffiControl (TC-1) and Return Transmitter Board (RTB) Options
860 DSPi Field Analyzer

860 DSPi - US (PP-1, SR-1, VP-1, QA-2, FS-1, TC-1 & RTB)

Configured with options

The 860 DSPi is a handheld spectrum analyzer with US DOCSIS 3.0 (8x4) modem that provides all of the testing power needed to ensure HFC networks operate to high standards. This includes balancing of the distribution system, maintaining analog and digital signal quality and controlling return path ingress. Standard Testing Features: 6 MHz Channel Spacing, Return Spectrum Analysis (4 to 65 MHz), Forward Spectrum Analysis (4 to 1000 MHz), Level Measurement, C/N Measurement, QAM Measurement (Level/MER/BER), Channel Plan Scan with Tilt Measurement, Ping, Trace Route, VoIP, Throughput, Cable Modem Statistics, Analog HUM, Depth of Modulation, CSO/CTB, FM Deviation, Sweepless Sweep, Line Viewer and QAM Source. Standard Communication Features: RF Test Port (F-Type, Replaceable), US DOCSIS 3.0 Modem 8x4 (100/304 MBPS), RJ45 Electrical Ethernet Port (10/100MBPS), CM to RJ-45 Mode. The complete kit includes: 860 DSPi Meter, Protective Carrying Case, Shoulder Strap, US AC Power Cable and AC to DC Power Adapter & Battery Charger. Configured with: Power Pack (PP-1), Return Sweep Receiver (SR-1), Return Tester RSVP (VP-1), QAM (QA-2), Forward Sweep (FS-1), TraffiControl (TC-1) and Return Transmitter Board (RTB) Options
860 DSPi Field Analyzer

860 DSPi - US (PP-1, SA-1, QA-2, FS-1 & TC-1)

Configured with options

The 860 DSPi is a handheld spectrum analyzer with US DOCSIS 3.0 (8x4) modem that provides all of the testing power needed to ensure HFC networks operate to high standards. This includes balancing of the distribution system, maintaining analog and digital signal quality and controlling return path ingress. Standard Testing Features: 6 MHz Channel Spacing, Return Spectrum Analysis (4 to 65 MHz), Forward Spectrum Analysis (4 to 1000 MHz), Level Measurement, C/N Measurement, QAM Measurement (Level/MER/BER), Channel Plan Scan with Tilt Measurement, Ping, Trace Route, VoIP, Throughput, Cable Modem Statistics, Analog HUM, Depth of Modulation, CSO/CTB, FM Deviation, Sweepless Sweep, Line Viewer and QAM Source. Standard Communication Features: RF Test Port (F-Type, Replaceable), US DOCSIS 3.0 Modem 8x4 (100/304 MBPS), RJ45 Electrical Ethernet Port (10/100MBPS), CM to RJ-45 Mode. The complete kit includes: 860 DSPi Meter, Protective Carrying Case, Shoulder Strap, US AC Power Cable and AC to DC Power Adapter & Battery Charger. Configured with: Power Pack (PP-1), Spectrum Analyzer (SA-1), QAM (QA-2), Forward Sweep (FS-1) and TraffiControl (TC-1) Options
860 DSPi Field Analyzer

860 DSPi - US (PP-1, SR-1, SA-1, QA-2, FS-1, TC-1 & RTB)

Configured with options

The 860 DSPi is a handheld spectrum analyzer with US DOCSIS 3.0 (8x4) modem that provides all of the testing power needed to ensure HFC networks operate to high standards. This includes balancing of the distribution system, maintaining analog and digital signal quality and controlling return path ingress. Standard Testing Features: 6 MHz Channel Spacing, Return Spectrum Analysis (4 to 65 MHz), Forward Spectrum Analysis (4 to 1000 MHz), Level Measurement, C/N Measurement, QAM Measurement (Level/MER/BER), Channel Plan Scan with Tilt Measurement, Ping, Trace Route, VoIP, Throughput, Cable Modem Statistics, Analog HUM, Depth of Modulation, CSO/CTB, FM Deviation, Sweepless Sweep, Line Viewer and QAM Source. Standard Communication Features: RF Test Port (F-Type, Replaceable), US DOCSIS 3.0 Modem 8x4 (100/304 MBPS), RJ45 Electrical Ethernet Port (10/100MBPS), CM to RJ-45 Mode. The complete kit includes: 860 DSPi Meter, Protective Carrying Case, Shoulder Strap, US AC Power Cable and AC to DC Power Adapter & Battery Charger. Configured with: Power Pack (PP-1), Return Sweep Receiver (SR-1), Spectrum Analyzer (SA-1), QAM (QA-2), Forward Sweep (FS-1), TraffiControl (TC-1) and Return Transmitter Board (RTB) Options
860 DSPi Field Analyzer

860 DSPi - US (PP-1, VP-1, SA-1, QA-2, FS-1, TC-1 & RTB)

Configured with options

The 860 DSPi is a handheld spectrum analyzer with US DOCSIS 3.0 (8x4) modem that provides all of the testing power needed to ensure HFC networks operate to high standards. This includes balancing of the distribution system, maintaining analog and digital signal quality and controlling return path ingress. Standard Testing Features: 6 MHz Channel Spacing, Return Spectrum Analysis (4 to 65 MHz), Forward Spectrum Analysis (4 to 1000 MHz), Level Measurement, C/N Measurement, QAM Measurement (Level/MER/BER), Channel Plan Scan with Tilt Measurement, Ping, Trace Route, VoIP, Throughput, Cable Modem Statistics, Analog HUM, Depth of Modulation, CSO/CTB, FM Deviation, Sweepless Sweep, Line Viewer and QAM Source. Standard Communication Features: RF Test Port (F-Type, Replaceable), US DOCSIS 3.0 Modem 8x4 (100/304 MBPS), RJ45 Electrical Ethernet Port (10/100MBPS), CM to RJ-45 Mode. The complete kit includes: 860 DSPi Meter, Protective Carrying Case, Shoulder Strap, US AC Power Cable and AC to DC Power Adapter & Battery Charger. Configured with: Power Pack (PP-1), Return Tester RSVP (VP-1), Spectrum Analyzer (SA-1), QAM (QA-2), Forward Sweep (FS-1), TraffiControl (TC-1) and Return Transmitter Board (RTB) Options
860 DSPi Field Analyzer

860 DSPi - US (PP-1, SR-1, VP-1, SA-1, QA-2, FS-1, TC-1 & RTB)

Configured with options

The 860 DSPi is a handheld spectrum analyzer with US DOCSIS 3.0 (8x4) modem that provides all of the testing power needed to ensure HFC networks operate to high standards. This includes balancing of the distribution system, maintaining analog and digital signal quality and controlling return path ingress. Standard Testing Features: 6 MHz Channel Spacing, Return Spectrum Analysis (4 to 65 MHz), Forward Spectrum Analysis (4 to 1000 MHz), Level Measurement, C/N Measurement, QAM Measurement (Level/MER/BER), Channel Plan Scan with Tilt Measurement, Ping, Trace Route, VoIP, Throughput, Cable Modem Statistics, Analog HUM, Depth of Modulation, CSO/CTB, FM Deviation, Sweepless Sweep, Line Viewer and QAM Source. Standard Communication Features: RF Test Port (F-Type, Replaceable), US DOCSIS 3.0 Modem 8x4 (100/304 MBPS), RJ45 Electrical Ethernet Port (10/100MBPS), CM to RJ-45 Mode. The complete kit includes: 860 DSPi Meter, Protective Carrying Case, Shoulder Strap, US AC Power Cable and AC to DC Power Adapter & Battery Charger. Configured with: Power Pack (PP-1), Return Sweep Receiver (SR-1), Return Tester RSVP (VP-1), Spectrum Analyzer (SA-1), QAM (QA-2), Forward Sweep (FS-1), TraffiControl (TC-1) and Return Transmitter Board (RTB) Options
860 DSPi Field Analyzer

860 DSPi - US (PP-1, VSB, FS-1 & TC-1)

Configured with options

The 860 DSPi is a handheld spectrum analyzer with US DOCSIS 3.0 (8x4) modem that provides all of the testing power needed to ensure HFC networks operate to high standards. This includes balancing of the distribution system, maintaining analog and digital signal quality and controlling return path ingress. Standard Testing Features: 6 MHz Channel Spacing, Return Spectrum Analysis (4 to 65 MHz), Forward Spectrum Analysis (4 to 1000 MHz), Level Measurement, C/N Measurement, QAM Measurement (Level/MER/BER), Channel Plan Scan with Tilt Measurement, Ping, Trace Route, VoIP, Throughput, Cable Modem Statistics, Analog HUM, Depth of Modulation, CSO/CTB, FM Deviation, Sweepless Sweep, Line Viewer and QAM Source. Standard Communication Features: RF Test Port (F-Type, Replaceable), US DOCSIS 3.0 Modem 8x4 (100/304 MBPS), RJ45 Electrical Ethernet Port (10/100MBPS), CM to RJ-45 Mode. The complete kit includes: 860 DSPi Meter, Protective Carrying Case, Shoulder Strap, US AC Power Cable and AC to DC Power Adapter & Battery Charger. Configured with: Power Pack (PP-1), Vestigial Side Band Modulation (VSB), Forward Sweep (FS-1) and TraffiControl (TC-1) Options
860 DSPi Field Analyzer

860 DSPi - US (PP-1, SR-1, VSB, FS-1, TC-1 & RTB)

Configured with options

The 860 DSPi is a handheld spectrum analyzer with US DOCSIS 3.0 (8x4) modem that provides all of the testing power needed to ensure HFC networks operate to high standards. This includes balancing of the distribution system, maintaining analog and digital signal quality and controlling return path ingress. Standard Testing Features: 6 MHz Channel Spacing, Return Spectrum Analysis (4 to 65 MHz), Forward Spectrum Analysis (4 to 1000 MHz), Level Measurement, C/N Measurement, QAM Measurement (Level/MER/BER), Channel Plan Scan with Tilt Measurement, Ping, Trace Route, VoIP, Throughput, Cable Modem Statistics, Analog HUM, Depth of Modulation, CSO/CTB, FM Deviation, Sweepless Sweep, Line Viewer and QAM Source. Standard Communication Features: RF Test Port (F-Type, Replaceable), US DOCSIS 3.0 Modem 8x4 (100/304 MBPS), RJ45 Electrical Ethernet Port (10/100MBPS), CM to RJ-45 Mode. The complete kit includes: 860 DSPi Meter, Protective Carrying Case, Shoulder Strap, US AC Power Cable and AC to DC Power Adapter & Battery Charger. Configured with: Power Pack (PP-1), Return Sweep Receiver (SR-1), Vestigial Side Band Modulation (VSB), Forward Sweep (FS-1), TraffiControl (TC-1) and Return Transmitter Board (RTB) Options
860 DSPi Field Analyzer

860 DSPi - US (PP-1, VP-1, VSB, FS-1, TC-1 & RTB)

Configured with options

The 860 DSPi is a handheld spectrum analyzer with US DOCSIS 3.0 (8x4) modem that provides all of the testing power needed to ensure HFC networks operate to high standards. This includes balancing of the distribution system, maintaining analog and digital signal quality and controlling return path ingress. Standard Testing Features: 6 MHz Channel Spacing, Return Spectrum Analysis (4 to 65 MHz), Forward Spectrum Analysis (4 to 1000 MHz), Level Measurement, C/N Measurement, QAM Measurement (Level/MER/BER), Channel Plan Scan with Tilt Measurement, Ping, Trace Route, VoIP, Throughput, Cable Modem Statistics, Analog HUM, Depth of Modulation, CSO/CTB, FM Deviation, Sweepless Sweep, Line Viewer and QAM Source. Standard Communication Features: RF Test Port (F-Type, Replaceable), US DOCSIS 3.0 Modem 8x4 (100/304 MBPS), RJ45 Electrical Ethernet Port (10/100MBPS), CM to RJ-45 Mode. The complete kit includes: 860 DSPi Meter, Protective Carrying Case, Shoulder Strap, US AC Power Cable and AC to DC Power Adapter & Battery Charger. Configured with: Power Pack (PP-1), Return Tester RSVP (VP-1), Vestigial Side Band Modulation (VSB), Forward Sweep (FS-1), TraffiControl (TC-1) and Return Transmitter Board (RTB) Options
860 DSPi Field Analyzer

860 DSPi - US (PP-1, SR-1, VP-1, VSB, FS-1, TC-1 & RTB)

Configured with options

The 860 DSPi is a handheld spectrum analyzer with US DOCSIS 3.0 (8x4) modem that provides all of the testing power needed to ensure HFC networks operate to high standards. This includes balancing of the distribution system, maintaining analog and digital signal quality and controlling return path ingress. Standard Testing Features: 6 MHz Channel Spacing, Return Spectrum Analysis (4 to 65 MHz), Forward Spectrum Analysis (4 to 1000 MHz), Level Measurement, C/N Measurement, QAM Measurement (Level/MER/BER), Channel Plan Scan with Tilt Measurement, Ping, Trace Route, VoIP, Throughput, Cable Modem Statistics, Analog HUM, Depth of Modulation, CSO/CTB, FM Deviation, Sweepless Sweep, Line Viewer and QAM Source. Standard Communication Features: RF Test Port (F-Type, Replaceable), US DOCSIS 3.0 Modem 8x4 (100/304 MBPS), RJ45 Electrical Ethernet Port (10/100MBPS), CM to RJ-45 Mode. The complete kit includes: 860 DSPi Meter, Protective Carrying Case, Shoulder Strap, US AC Power Cable and AC to DC Power Adapter & Battery Charger. Configured with: Power Pack (PP-1), Return Sweep Receiver (SR-1), Return Tester RSVP (VP-1), Vestigial Side Band Modulation (VSB), Forward Sweep (FS-1), TraffiControl (TC-1) and Return Transmitter Board (RTB) Options
860 DSPi Field Analyzer

860 DSPi - US (PP-1, SA-1, VSB, FS-1 & TC-1)

Configured with options

The 860 DSPi is a handheld spectrum analyzer with US DOCSIS 3.0 (8x4) modem that provides all of the testing power needed to ensure HFC networks operate to high standards. This includes balancing of the distribution system, maintaining analog and digital signal quality and controlling return path ingress. Standard Testing Features: 6 MHz Channel Spacing, Return Spectrum Analysis (4 to 65 MHz), Forward Spectrum Analysis (4 to 1000 MHz), Level Measurement, C/N Measurement, QAM Measurement (Level/MER/BER), Channel Plan Scan with Tilt Measurement, Ping, Trace Route, VoIP, Throughput, Cable Modem Statistics, Analog HUM, Depth of Modulation, CSO/CTB, FM Deviation, Sweepless Sweep, Line Viewer and QAM Source. Standard Communication Features: RF Test Port (F-Type, Replaceable), US DOCSIS 3.0 Modem 8x4 (100/304 MBPS), RJ45 Electrical Ethernet Port (10/100MBPS), CM to RJ-45 Mode. The complete kit includes: 860 DSPi Meter, Protective Carrying Case, Shoulder Strap, US AC Power Cable and AC to DC Power Adapter & Battery Charger. Configured with: Power Pack (PP-1), Spectrum Analyzer (SA-1), Vestigial Side Band Modulation (VSB), Forward Sweep (FS-1) and TraffiControl (TC-1) Options
860 DSPi Field Analyzer

860 DSPi - US (PP-1, SR-1, SA-1, VSB, FS-1, TC-1 & RTB)

Configured with options

The 860 DSPi is a handheld spectrum analyzer with US DOCSIS 3.0 (8x4) modem that provides all of the testing power needed to ensure HFC networks operate to high standards. This includes balancing of the distribution system, maintaining analog and digital signal quality and controlling return path ingress. Standard Testing Features: 6 MHz Channel Spacing, Return Spectrum Analysis (4 to 65 MHz), Forward Spectrum Analysis (4 to 1000 MHz), Level Measurement, C/N Measurement, QAM Measurement (Level/MER/BER), Channel Plan Scan with Tilt Measurement, Ping, Trace Route, VoIP, Throughput, Cable Modem Statistics, Analog HUM, Depth of Modulation, CSO/CTB, FM Deviation, Sweepless Sweep, Line Viewer and QAM Source. Standard Communication Features: RF Test Port (F-Type, Replaceable), US DOCSIS 3.0 Modem 8x4 (100/304 MBPS), RJ45 Electrical Ethernet Port (10/100MBPS), CM to RJ-45 Mode. The complete kit includes: 860 DSPi Meter, Protective Carrying Case, Shoulder Strap, US AC Power Cable and AC to DC Power Adapter & Battery Charger. Configured with: Power Pack (PP-1), Return Sweep Receiver (SR-1), Spectrum Analyzer (SA-1), Vestigial Side Band Modulation (VSB), Forward Sweep (FS-1), TraffiControl (TC-1) and Return Transmitter Board (RTB) Options
860 DSPi Field Analyzer

860 DSPi - US (PP-1, VP-1, SA-1, VSB, FS-1, TC-1 & RTB)

Configured with options

The 860 DSPi is a handheld spectrum analyzer with US DOCSIS 3.0 (8x4) modem that provides all of the testing power needed to ensure HFC networks operate to high standards. This includes balancing of the distribution system, maintaining analog and digital signal quality and controlling return path ingress. Standard Testing Features: 6 MHz Channel Spacing, Return Spectrum Analysis (4 to 65 MHz), Forward Spectrum Analysis (4 to 1000 MHz), Level Measurement, C/N Measurement, QAM Measurement (Level/MER/BER), Channel Plan Scan with Tilt Measurement, Ping, Trace Route, VoIP, Throughput, Cable Modem Statistics, Analog HUM, Depth of Modulation, CSO/CTB, FM Deviation, Sweepless Sweep, Line Viewer and QAM Source. Standard Communication Features: RF Test Port (F-Type, Replaceable), US DOCSIS 3.0 Modem 8x4 (100/304 MBPS), RJ45 Electrical Ethernet Port (10/100MBPS), CM to RJ-45 Mode. The complete kit includes: 860 DSPi Meter, Protective Carrying Case, Shoulder Strap, US AC Power Cable and AC to DC Power Adapter & Battery Charger. Configured with: Power Pack (PP-1), Return Tester RSVP (VP-1), Spectrum Analyzer (SA-1), Vestigial Side Band Modulation (VSB), Forward Sweep (FS-1), TraffiControl (TC-1) and Return Transmitter Board (RTB) Options
860 DSPi Field Analyzer

860 DSPi - US (PP-1, SR-1, VP-1, SA-1, VSB, FS-1, TC-1 & RTB)

Configured with options

The 860 DSPi is a handheld spectrum analyzer with US DOCSIS 3.0 (8x4) modem that provides all of the testing power needed to ensure HFC networks operate to high standards. This includes balancing of the distribution system, maintaining analog and digital signal quality and controlling return path ingress. Standard Testing Features: 6 MHz Channel Spacing, Return Spectrum Analysis (4 to 65 MHz), Forward Spectrum Analysis (4 to 1000 MHz), Level Measurement, C/N Measurement, QAM Measurement (Level/MER/BER), Channel Plan Scan with Tilt Measurement, Ping, Trace Route, VoIP, Throughput, Cable Modem Statistics, Analog HUM, Depth of Modulation, CSO/CTB, FM Deviation, Sweepless Sweep, Line Viewer and QAM Source. Standard Communication Features: RF Test Port (F-Type, Replaceable), US DOCSIS 3.0 Modem 8x4 (100/304 MBPS), RJ45 Electrical Ethernet Port (10/100MBPS), CM to RJ-45 Mode. The complete kit includes: 860 DSPi Meter, Protective Carrying Case, Shoulder Strap, US AC Power Cable and AC to DC Power Adapter & Battery Charger. Configured with: Power Pack (PP-1), Return Sweep Receiver (SR-1), Return Tester RSVP (VP-1), Spectrum Analyzer (SA-1), Vestigial Side Band Modulation (VSB), Forward Sweep (FS-1), TraffiControl (TC-1) and Return Transmitter Board (RTB) Options
860 DSPi Field Analyzer

860 DSPi - US (PP-1, QA-2, VSB, FS-1 & TC-1)

Configured with options

The 860 DSPi is a handheld spectrum analyzer with US DOCSIS 3.0 (8x4) modem that provides all of the testing power needed to ensure HFC networks operate to high standards. This includes balancing of the distribution system, maintaining analog and digital signal quality and controlling return path ingress. Standard Testing Features: 6 MHz Channel Spacing, Return Spectrum Analysis (4 to 65 MHz), Forward Spectrum Analysis (4 to 1000 MHz), Level Measurement, C/N Measurement, QAM Measurement (Level/MER/BER), Channel Plan Scan with Tilt Measurement, Ping, Trace Route, VoIP, Throughput, Cable Modem Statistics, Analog HUM, Depth of Modulation, CSO/CTB, FM Deviation, Sweepless Sweep, Line Viewer and QAM Source. Standard Communication Features: RF Test Port (F-Type, Replaceable), US DOCSIS 3.0 Modem 8x4 (100/304 MBPS), RJ45 Electrical Ethernet Port (10/100MBPS), CM to RJ-45 Mode. The complete kit includes: 860 DSPi Meter, Protective Carrying Case, Shoulder Strap, US AC Power Cable and AC to DC Power Adapter & Battery Charger. Configured with: Power Pack (PP-1), QAM (QA-2), Vestigial Side Band Modulation (VSB), Forward Sweep (FS-1) and TraffiControl (TC-1) Options
860 DSPi Field Analyzer

860 DSPi - US (PP-1, SR-1, QA-2, VSB, FS-1, TC-1 & RTB)

Configured with options

The 860 DSPi is a handheld spectrum analyzer with US DOCSIS 3.0 (8x4) modem that provides all of the testing power needed to ensure HFC networks operate to high standards. This includes balancing of the distribution system, maintaining analog and digital signal quality and controlling return path ingress. Standard Testing Features: 6 MHz Channel Spacing, Return Spectrum Analysis (4 to 65 MHz), Forward Spectrum Analysis (4 to 1000 MHz), Level Measurement, C/N Measurement, QAM Measurement (Level/MER/BER), Channel Plan Scan with Tilt Measurement, Ping, Trace Route, VoIP, Throughput, Cable Modem Statistics, Analog HUM, Depth of Modulation, CSO/CTB, FM Deviation, Sweepless Sweep, Line Viewer and QAM Source. Standard Communication Features: RF Test Port (F-Type, Replaceable), US DOCSIS 3.0 Modem 8x4 (100/304 MBPS), RJ45 Electrical Ethernet Port (10/100MBPS), CM to RJ-45 Mode. The complete kit includes: 860 DSPi Meter, Protective Carrying Case, Shoulder Strap, US AC Power Cable and AC to DC Power Adapter & Battery Charger. Configured with: Power Pack (PP-1), Return Sweep Receiver (SR-1), QAM (QA-2), Vestigial Side Band Modulation (VSB), Forward Sweep (FS-1), TraffiControl (TC-1) and Return Transmitter Board (RTB) Options
860 DSPi Field Analyzer

860 DSPi - US (PP-1, VP-1, QA-2, VSB, FS-1, TC-1 & RTB)

Configured with options

The 860 DSPi is a handheld spectrum analyzer with US DOCSIS 3.0 (8x4) modem that provides all of the testing power needed to ensure HFC networks operate to high standards. This includes balancing of the distribution system, maintaining analog and digital signal quality and controlling return path ingress. Standard Testing Features: 6 MHz Channel Spacing, Return Spectrum Analysis (4 to 65 MHz), Forward Spectrum Analysis (4 to 1000 MHz), Level Measurement, C/N Measurement, QAM Measurement (Level/MER/BER), Channel Plan Scan with Tilt Measurement, Ping, Trace Route, VoIP, Throughput, Cable Modem Statistics, Analog HUM, Depth of Modulation, CSO/CTB, FM Deviation, Sweepless Sweep, Line Viewer and QAM Source. Standard Communication Features: RF Test Port (F-Type, Replaceable), US DOCSIS 3.0 Modem 8x4 (100/304 MBPS), RJ45 Electrical Ethernet Port (10/100MBPS), CM to RJ-45 Mode. The complete kit includes: 860 DSPi Meter, Protective Carrying Case, Shoulder Strap, US AC Power Cable and AC to DC Power Adapter & Battery Charger. Configured with: Power Pack (PP-1), Return Tester RSVP (VP-1), QAM (QA-2), Vestigial Side Band Modulation (VSB), Forward Sweep (FS-1), TraffiControl (TC-1) and Return Transmitter Board (RTB) Options
860 DSPi Field Analyzer

860 DSPi - US (PP-1, SR-1, VP-1, QA-2, VSB, FS-1, TC-1 & RTB)

Configured with options

The 860 DSPi is a handheld spectrum analyzer with US DOCSIS 3.0 (8x4) modem that provides all of the testing power needed to ensure HFC networks operate to high standards. This includes balancing of the distribution system, maintaining analog and digital signal quality and controlling return path ingress. Standard Testing Features: 6 MHz Channel Spacing, Return Spectrum Analysis (4 to 65 MHz), Forward Spectrum Analysis (4 to 1000 MHz), Level Measurement, C/N Measurement, QAM Measurement (Level/MER/BER), Channel Plan Scan with Tilt Measurement, Ping, Trace Route, VoIP, Throughput, Cable Modem Statistics, Analog HUM, Depth of Modulation, CSO/CTB, FM Deviation, Sweepless Sweep, Line Viewer and QAM Source. Standard Communication Features: RF Test Port (F-Type, Replaceable), US DOCSIS 3.0 Modem 8x4 (100/304 MBPS), RJ45 Electrical Ethernet Port (10/100MBPS), CM to RJ-45 Mode. The complete kit includes: 860 DSPi Meter, Protective Carrying Case, Shoulder Strap, US AC Power Cable and AC to DC Power Adapter & Battery Charger. Configured with: Power Pack (PP-1), Return Sweep Receiver (SR-1), Return Tester RSVP (VP-1), QAM (QA-2), Vestigial Side Band Modulation (VSB), Forward Sweep (FS-1), TraffiControl (TC-1) and Return Transmitter Board (RTB) Options
860 DSPi Field Analyzer

860 DSPi - US (PP-1, SA-1, QA-2, VSB, FS-1 & TC-1)

Configured with options

The 860 DSPi is a handheld spectrum analyzer with US DOCSIS 3.0 (8x4) modem that provides all of the testing power needed to ensure HFC networks operate to high standards. This includes balancing of the distribution system, maintaining analog and digital signal quality and controlling return path ingress. Standard Testing Features: 6 MHz Channel Spacing, Return Spectrum Analysis (4 to 65 MHz), Forward Spectrum Analysis (4 to 1000 MHz), Level Measurement, C/N Measurement, QAM Measurement (Level/MER/BER), Channel Plan Scan with Tilt Measurement, Ping, Trace Route, VoIP, Throughput, Cable Modem Statistics, Analog HUM, Depth of Modulation, CSO/CTB, FM Deviation, Sweepless Sweep, Line Viewer and QAM Source. Standard Communication Features: RF Test Port (F-Type, Replaceable), US DOCSIS 3.0 Modem 8x4 (100/304 MBPS), RJ45 Electrical Ethernet Port (10/100MBPS), CM to RJ-45 Mode. The complete kit includes: 860 DSPi Meter, Protective Carrying Case, Shoulder Strap, US AC Power Cable and AC to DC Power Adapter & Battery Charger. Configured with: Power Pack (PP-1), Spectrum Analyzer (SA-1), QAM (QA-2), Vestigial Side Band Modulation (VSB), Forward Sweep (FS-1) and TraffiControl (TC-1) Options
860 DSPi Field Analyzer

860 DSPi - US (PP-1, SR-1, SA-1, QA-2, VSB, FS-1, TC-1 & RTB)

Configured with options

The 860 DSPi is a handheld spectrum analyzer with US DOCSIS 3.0 (8x4) modem that provides all of the testing power needed to ensure HFC networks operate to high standards. This includes balancing of the distribution system, maintaining analog and digital signal quality and controlling return path ingress. Standard Testing Features: 6 MHz Channel Spacing, Return Spectrum Analysis (4 to 65 MHz), Forward Spectrum Analysis (4 to 1000 MHz), Level Measurement, C/N Measurement, QAM Measurement (Level/MER/BER), Channel Plan Scan with Tilt Measurement, Ping, Trace Route, VoIP, Throughput, Cable Modem Statistics, Analog HUM, Depth of Modulation, CSO/CTB, FM Deviation, Sweepless Sweep, Line Viewer and QAM Source. Standard Communication Features: RF Test Port (F-Type, Replaceable), US DOCSIS 3.0 Modem 8x4 (100/304 MBPS), RJ45 Electrical Ethernet Port (10/100MBPS), CM to RJ-45 Mode. The complete kit includes: 860 DSPi Meter, Protective Carrying Case, Shoulder Strap, US AC Power Cable and AC to DC Power Adapter & Battery Charger. Configured with: Power Pack (PP-1), Return Sweep Receiver (SR-1), Spectrum Analyzer (SA-1), QAM (QA-2), Vestigial Side Band Modulation (VSB), Forward Sweep (FS-1), TraffiControl (TC-1) and Return Transmitter Board (RTB) Options
860 DSPi Field Analyzer

860 DSPi - US (PP-1, VP-1, SA-1, QA-2, VSB, FS-1, TC-1 & RTB)

Configured with options

The 860 DSPi is a handheld spectrum analyzer with US DOCSIS 3.0 (8x4) modem that provides all of the testing power needed to ensure HFC networks operate to high standards. This includes balancing of the distribution system, maintaining analog and digital signal quality and controlling return path ingress. Standard Testing Features: 6 MHz Channel Spacing, Return Spectrum Analysis (4 to 65 MHz), Forward Spectrum Analysis (4 to 1000 MHz), Level Measurement, C/N Measurement, QAM Measurement (Level/MER/BER), Channel Plan Scan with Tilt Measurement, Ping, Trace Route, VoIP, Throughput, Cable Modem Statistics, Analog HUM, Depth of Modulation, CSO/CTB, FM Deviation, Sweepless Sweep, Line Viewer and QAM Source. Standard Communication Features: RF Test Port (F-Type, Replaceable), US DOCSIS 3.0 Modem 8x4 (100/304 MBPS), RJ45 Electrical Ethernet Port (10/100MBPS), CM to RJ-45 Mode. The complete kit includes: 860 DSPi Meter, Protective Carrying Case, Shoulder Strap, US AC Power Cable and AC to DC Power Adapter & Battery Charger. Configured with: Power Pack (PP-1), Return Tester RSVP (VP-1), Spectrum Analyzer (SA-1), QAM (QA-2), Vestigial Side Band Modulation (VSB), Forward Sweep (FS-1), TraffiControl (TC-1) and Return Transmitter Board (RTB) Options
860 DSPi Field Analyzer

860 DSPi - US (PP-1, SR-1, VP-1, SA-1, QA-2, VSB, FS-1, TC-1 & RTB)

Configured with options

The 860 DSPi is a handheld spectrum analyzer with US DOCSIS 3.0 (8x4) modem that provides all of the testing power needed to ensure HFC networks operate to high standards. This includes balancing of the distribution system, maintaining analog and digital signal quality and controlling return path ingress. Standard Testing Features: 6 MHz Channel Spacing, Return Spectrum Analysis (4 to 65 MHz), Forward Spectrum Analysis (4 to 1000 MHz), Level Measurement, C/N Measurement, QAM Measurement (Level/MER/BER), Channel Plan Scan with Tilt Measurement, Ping, Trace Route, VoIP, Throughput, Cable Modem Statistics, Analog HUM, Depth of Modulation, CSO/CTB, FM Deviation, Sweepless Sweep, Line Viewer and QAM Source. Standard Communication Features: RF Test Port (F-Type, Replaceable), US DOCSIS 3.0 Modem 8x4 (100/304 MBPS), RJ45 Electrical Ethernet Port (10/100MBPS), CM to RJ-45 Mode. The complete kit includes: 860 DSPi Meter, Protective Carrying Case, Shoulder Strap, US AC Power Cable and AC to DC Power Adapter & Battery Charger. Configured with: Power Pack (PP-1), Return Sweep Receiver (SR-1), Return Tester RSVP (VP-1), Spectrum Analyzer (SA-1), QAM (QA-2), Vestigial Side Band Modulation (VSB), Forward Sweep (FS-1), TraffiControl (TC-1) and Return Transmitter Board (RTB) Options
860 DSPi Field Analyzer

860 DSPi - US (PP-1, VITS & TC-1)

Configured with options

The 860 DSPi is a handheld spectrum analyzer with US DOCSIS 3.0 (8x4) modem that provides all of the testing power needed to ensure HFC networks operate to high standards. This includes balancing of the distribution system, maintaining analog and digital signal quality and controlling return path ingress. Standard Testing Features: 6 MHz Channel Spacing, Return Spectrum Analysis (4 to 65 MHz), Forward Spectrum Analysis (4 to 1000 MHz), Level Measurement, C/N Measurement, QAM Measurement (Level/MER/BER), Channel Plan Scan with Tilt Measurement, Ping, Trace Route, VoIP, Throughput, Cable Modem Statistics, Analog HUM, Depth of Modulation, CSO/CTB, FM Deviation, Sweepless Sweep, Line Viewer and QAM Source. Standard Communication Features: RF Test Port (F-Type, Replaceable), US DOCSIS 3.0 Modem 8x4 (100/304 MBPS), RJ45 Electrical Ethernet Port (10/100MBPS), CM to RJ-45 Mode. The complete kit includes: 860 DSPi Meter, Protective Carrying Case, Shoulder Strap, US AC Power Cable and AC to DC Power Adapter & Battery Charger. Configured with: Power Pack (PP-1), Vertical Interval Test Signals (VITS) and TraffiControl (TC-1) Options
860 DSPi Field Analyzer

860 DSPi - US (PP-1, SR-1, VITS, TC-1 & RTB)

Configured with options

The 860 DSPi is a handheld spectrum analyzer with US DOCSIS 3.0 (8x4) modem that provides all of the testing power needed to ensure HFC networks operate to high standards. This includes balancing of the distribution system, maintaining analog and digital signal quality and controlling return path ingress. Standard Testing Features: 6 MHz Channel Spacing, Return Spectrum Analysis (4 to 65 MHz), Forward Spectrum Analysis (4 to 1000 MHz), Level Measurement, C/N Measurement, QAM Measurement (Level/MER/BER), Channel Plan Scan with Tilt Measurement, Ping, Trace Route, VoIP, Throughput, Cable Modem Statistics, Analog HUM, Depth of Modulation, CSO/CTB, FM Deviation, Sweepless Sweep, Line Viewer and QAM Source. Standard Communication Features: RF Test Port (F-Type, Replaceable), US DOCSIS 3.0 Modem 8x4 (100/304 MBPS), RJ45 Electrical Ethernet Port (10/100MBPS), CM to RJ-45 Mode. The complete kit includes: 860 DSPi Meter, Protective Carrying Case, Shoulder Strap, US AC Power Cable and AC to DC Power Adapter & Battery Charger. Configured with: Power Pack (PP-1), Return Sweep Receiver (SR-1), Vertical Interval Test Signals (VITS), TraffiControl (TC-1) and Return Transmitter Board (RTB) Options
860 DSPi Field Analyzer

860 DSPi - US (PP-1, VP-1, VITS, TC-1 & RTB)

Configured with options

The 860 DSPi is a handheld spectrum analyzer with US DOCSIS 3.0 (8x4) modem that provides all of the testing power needed to ensure HFC networks operate to high standards. This includes balancing of the distribution system, maintaining analog and digital signal quality and controlling return path ingress. Standard Testing Features: 6 MHz Channel Spacing, Return Spectrum Analysis (4 to 65 MHz), Forward Spectrum Analysis (4 to 1000 MHz), Level Measurement, C/N Measurement, QAM Measurement (Level/MER/BER), Channel Plan Scan with Tilt Measurement, Ping, Trace Route, VoIP, Throughput, Cable Modem Statistics, Analog HUM, Depth of Modulation, CSO/CTB, FM Deviation, Sweepless Sweep, Line Viewer and QAM Source. Standard Communication Features: RF Test Port (F-Type, Replaceable), US DOCSIS 3.0 Modem 8x4 (100/304 MBPS), RJ45 Electrical Ethernet Port (10/100MBPS), CM to RJ-45 Mode. The complete kit includes: 860 DSPi Meter, Protective Carrying Case, Shoulder Strap, US AC Power Cable and AC to DC Power Adapter & Battery Charger. Configured with: Power Pack (PP-1), Return Tester RSVP (VP-1), Vertical Interval Test Signals (VITS), TraffiControl (TC-1) and Return Transmitter Board (RTB) Options
860 DSPi Field Analyzer

860 DSPi - US (PP-1, SR-1, VP-1, VITS, TC-1 & RTB)

Configured with options

The 860 DSPi is a handheld spectrum analyzer with US DOCSIS 3.0 (8x4) modem that provides all of the testing power needed to ensure HFC networks operate to high standards. This includes balancing of the distribution system, maintaining analog and digital signal quality and controlling return path ingress. Standard Testing Features: 6 MHz Channel Spacing, Return Spectrum Analysis (4 to 65 MHz), Forward Spectrum Analysis (4 to 1000 MHz), Level Measurement, C/N Measurement, QAM Measurement (Level/MER/BER), Channel Plan Scan with Tilt Measurement, Ping, Trace Route, VoIP, Throughput, Cable Modem Statistics, Analog HUM, Depth of Modulation, CSO/CTB, FM Deviation, Sweepless Sweep, Line Viewer and QAM Source. Standard Communication Features: RF Test Port (F-Type, Replaceable), US DOCSIS 3.0 Modem 8x4 (100/304 MBPS), RJ45 Electrical Ethernet Port (10/100MBPS), CM to RJ-45 Mode. The complete kit includes: 860 DSPi Meter, Protective Carrying Case, Shoulder Strap, US AC Power Cable and AC to DC Power Adapter & Battery Charger. Configured with: Power Pack (PP-1), Return Sweep Receiver (SR-1), Return Tester RSVP (VP-1), Vertical Interval Test Signals (VITS), TraffiControl (TC-1) and Return Transmitter Board (RTB) Options
860 DSPi Field Analyzer

860 DSPi - US (PP-1, SA-1, VITS & TC-1)

Configured with options

The 860 DSPi is a handheld spectrum analyzer with US DOCSIS 3.0 (8x4) modem that provides all of the testing power needed to ensure HFC networks operate to high standards. This includes balancing of the distribution system, maintaining analog and digital signal quality and controlling return path ingress. Standard Testing Features: 6 MHz Channel Spacing, Return Spectrum Analysis (4 to 65 MHz), Forward Spectrum Analysis (4 to 1000 MHz), Level Measurement, C/N Measurement, QAM Measurement (Level/MER/BER), Channel Plan Scan with Tilt Measurement, Ping, Trace Route, VoIP, Throughput, Cable Modem Statistics, Analog HUM, Depth of Modulation, CSO/CTB, FM Deviation, Sweepless Sweep, Line Viewer and QAM Source. Standard Communication Features: RF Test Port (F-Type, Replaceable), US DOCSIS 3.0 Modem 8x4 (100/304 MBPS), RJ45 Electrical Ethernet Port (10/100MBPS), CM to RJ-45 Mode. The complete kit includes: 860 DSPi Meter, Protective Carrying Case, Shoulder Strap, US AC Power Cable and AC to DC Power Adapter & Battery Charger. Configured with: Power Pack (PP-1), Spectrum Analyzer (SA-1), Vertical Interval Test Signals (VITS) and TraffiControl (TC-1) Options
860 DSPi Field Analyzer

860 DSPi - US (PP-1, SR-1, SA-1, VITS, TC-1 & RTB)

Configured with options

The 860 DSPi is a handheld spectrum analyzer with US DOCSIS 3.0 (8x4) modem that provides all of the testing power needed to ensure HFC networks operate to high standards. This includes balancing of the distribution system, maintaining analog and digital signal quality and controlling return path ingress. Standard Testing Features: 6 MHz Channel Spacing, Return Spectrum Analysis (4 to 65 MHz), Forward Spectrum Analysis (4 to 1000 MHz), Level Measurement, C/N Measurement, QAM Measurement (Level/MER/BER), Channel Plan Scan with Tilt Measurement, Ping, Trace Route, VoIP, Throughput, Cable Modem Statistics, Analog HUM, Depth of Modulation, CSO/CTB, FM Deviation, Sweepless Sweep, Line Viewer and QAM Source. Standard Communication Features: RF Test Port (F-Type, Replaceable), US DOCSIS 3.0 Modem 8x4 (100/304 MBPS), RJ45 Electrical Ethernet Port (10/100MBPS), CM to RJ-45 Mode. The complete kit includes: 860 DSPi Meter, Protective Carrying Case, Shoulder Strap, US AC Power Cable and AC to DC Power Adapter & Battery Charger. Configured with: Power Pack (PP-1), Return Sweep Receiver (SR-1), Spectrum Analyzer (SA-1), Vertical Interval Test Signals (VITS), TraffiControl (TC-1) and Return Transmitter Board (RTB) Options
860 DSPi Field Analyzer

860 DSPi - US (PP-1, VP-1, SA-1, VITS, TC-1 & RTB)

Configured with options

The 860 DSPi is a handheld spectrum analyzer with US DOCSIS 3.0 (8x4) modem that provides all of the testing power needed to ensure HFC networks operate to high standards. This includes balancing of the distribution system, maintaining analog and digital signal quality and controlling return path ingress. Standard Testing Features: 6 MHz Channel Spacing, Return Spectrum Analysis (4 to 65 MHz), Forward Spectrum Analysis (4 to 1000 MHz), Level Measurement, C/N Measurement, QAM Measurement (Level/MER/BER), Channel Plan Scan with Tilt Measurement, Ping, Trace Route, VoIP, Throughput, Cable Modem Statistics, Analog HUM, Depth of Modulation, CSO/CTB, FM Deviation, Sweepless Sweep, Line Viewer and QAM Source. Standard Communication Features: RF Test Port (F-Type, Replaceable), US DOCSIS 3.0 Modem 8x4 (100/304 MBPS), RJ45 Electrical Ethernet Port (10/100MBPS), CM to RJ-45 Mode. The complete kit includes: 860 DSPi Meter, Protective Carrying Case, Shoulder Strap, US AC Power Cable and AC to DC Power Adapter & Battery Charger. Configured with: Power Pack (PP-1), Return Tester RSVP (VP-1), Spectrum Analyzer (SA-1), Vertical Interval Test Signals (VITS), TraffiControl (TC-1) and Return Transmitter Board (RTB) Options
860 DSPi Field Analyzer

860 DSPi - US (PP-1, SR-1, VP-1, SA-1, VITS, TC-1 & RTB)

Configured with options

The 860 DSPi is a handheld spectrum analyzer with US DOCSIS 3.0 (8x4) modem that provides all of the testing power needed to ensure HFC networks operate to high standards. This includes balancing of the distribution system, maintaining analog and digital signal quality and controlling return path ingress. Standard Testing Features: 6 MHz Channel Spacing, Return Spectrum Analysis (4 to 65 MHz), Forward Spectrum Analysis (4 to 1000 MHz), Level Measurement, C/N Measurement, QAM Measurement (Level/MER/BER), Channel Plan Scan with Tilt Measurement, Ping, Trace Route, VoIP, Throughput, Cable Modem Statistics, Analog HUM, Depth of Modulation, CSO/CTB, FM Deviation, Sweepless Sweep, Line Viewer and QAM Source. Standard Communication Features: RF Test Port (F-Type, Replaceable), US DOCSIS 3.0 Modem 8x4 (100/304 MBPS), RJ45 Electrical Ethernet Port (10/100MBPS), CM to RJ-45 Mode. The complete kit includes: 860 DSPi Meter, Protective Carrying Case, Shoulder Strap, US AC Power Cable and AC to DC Power Adapter & Battery Charger. Configured with: Power Pack (PP-1), Return Sweep Receiver (SR-1), Return Tester RSVP (VP-1), Spectrum Analyzer (SA-1), Vertical Interval Test Signals (VITS), TraffiControl (TC-1) and Return Transmitter Board (RTB) Options
860 DSPi Field Analyzer

860 DSPi - US (PP-1, QA-2, VITS & TC-1)

Configured with options

The 860 DSPi is a handheld spectrum analyzer with US DOCSIS 3.0 (8x4) modem that provides all of the testing power needed to ensure HFC networks operate to high standards. This includes balancing of the distribution system, maintaining analog and digital signal quality and controlling return path ingress. Standard Testing Features: 6 MHz Channel Spacing, Return Spectrum Analysis (4 to 65 MHz), Forward Spectrum Analysis (4 to 1000 MHz), Level Measurement, C/N Measurement, QAM Measurement (Level/MER/BER), Channel Plan Scan with Tilt Measurement, Ping, Trace Route, VoIP, Throughput, Cable Modem Statistics, Analog HUM, Depth of Modulation, CSO/CTB, FM Deviation, Sweepless Sweep, Line Viewer and QAM Source. Standard Communication Features: RF Test Port (F-Type, Replaceable), US DOCSIS 3.0 Modem 8x4 (100/304 MBPS), RJ45 Electrical Ethernet Port (10/100MBPS), CM to RJ-45 Mode. The complete kit includes: 860 DSPi Meter, Protective Carrying Case, Shoulder Strap, US AC Power Cable and AC to DC Power Adapter & Battery Charger. Configured with: Power Pack (PP-1), QAM (QA-2), Vertical Interval Test Signals (VITS) and TraffiControl (TC-1) Options
860 DSPi Field Analyzer

860 DSPi - US (PP-1, SR-1, QA-2, VITS, TC-1 & RTB)

Configured with options

The 860 DSPi is a handheld spectrum analyzer with US DOCSIS 3.0 (8x4) modem that provides all of the testing power needed to ensure HFC networks operate to high standards. This includes balancing of the distribution system, maintaining analog and digital signal quality and controlling return path ingress. Standard Testing Features: 6 MHz Channel Spacing, Return Spectrum Analysis (4 to 65 MHz), Forward Spectrum Analysis (4 to 1000 MHz), Level Measurement, C/N Measurement, QAM Measurement (Level/MER/BER), Channel Plan Scan with Tilt Measurement, Ping, Trace Route, VoIP, Throughput, Cable Modem Statistics, Analog HUM, Depth of Modulation, CSO/CTB, FM Deviation, Sweepless Sweep, Line Viewer and QAM Source. Standard Communication Features: RF Test Port (F-Type, Replaceable), US DOCSIS 3.0 Modem 8x4 (100/304 MBPS), RJ45 Electrical Ethernet Port (10/100MBPS), CM to RJ-45 Mode. The complete kit includes: 860 DSPi Meter, Protective Carrying Case, Shoulder Strap, US AC Power Cable and AC to DC Power Adapter & Battery Charger. Configured with: Power Pack (PP-1), Return Sweep Receiver (SR-1), QAM (QA-2), Vertical Interval Test Signals (VITS), TraffiControl (TC-1) and Return Transmitter Board (RTB) Options
860 DSPi Field Analyzer

860 DSPi - US (PP-1, VP-1, QA-2, VITS, TC-1 & RTB)

Configured with options

The 860 DSPi is a handheld spectrum analyzer with US DOCSIS 3.0 (8x4) modem that provides all of the testing power needed to ensure HFC networks operate to high standards. This includes balancing of the distribution system, maintaining analog and digital signal quality and controlling return path ingress. Standard Testing Features: 6 MHz Channel Spacing, Return Spectrum Analysis (4 to 65 MHz), Forward Spectrum Analysis (4 to 1000 MHz), Level Measurement, C/N Measurement, QAM Measurement (Level/MER/BER), Channel Plan Scan with Tilt Measurement, Ping, Trace Route, VoIP, Throughput, Cable Modem Statistics, Analog HUM, Depth of Modulation, CSO/CTB, FM Deviation, Sweepless Sweep, Line Viewer and QAM Source. Standard Communication Features: RF Test Port (F-Type, Replaceable), US DOCSIS 3.0 Modem 8x4 (100/304 MBPS), RJ45 Electrical Ethernet Port (10/100MBPS), CM to RJ-45 Mode. The complete kit includes: 860 DSPi Meter, Protective Carrying Case, Shoulder Strap, US AC Power Cable and AC to DC Power Adapter & Battery Charger. Configured with: Power Pack (PP-1), Return Tester RSVP (VP-1), QAM (QA-2), Vertical Interval Test Signals (VITS), TraffiControl (TC-1) and Return Transmitter Board (RTB) Options
860 DSPi Field Analyzer

860 DSPi - US (PP-1, SR-1, VP-1, QA-2, VITS, TC-1 & RTB)

Configured with options

The 860 DSPi is a handheld spectrum analyzer with US DOCSIS 3.0 (8x4) modem that provides all of the testing power needed to ensure HFC networks operate to high standards. This includes balancing of the distribution system, maintaining analog and digital signal quality and controlling return path ingress. Standard Testing Features: 6 MHz Channel Spacing, Return Spectrum Analysis (4 to 65 MHz), Forward Spectrum Analysis (4 to 1000 MHz), Level Measurement, C/N Measurement, QAM Measurement (Level/MER/BER), Channel Plan Scan with Tilt Measurement, Ping, Trace Route, VoIP, Throughput, Cable Modem Statistics, Analog HUM, Depth of Modulation, CSO/CTB, FM Deviation, Sweepless Sweep, Line Viewer and QAM Source. Standard Communication Features: RF Test Port (F-Type, Replaceable), US DOCSIS 3.0 Modem 8x4 (100/304 MBPS), RJ45 Electrical Ethernet Port (10/100MBPS), CM to RJ-45 Mode. The complete kit includes: 860 DSPi Meter, Protective Carrying Case, Shoulder Strap, US AC Power Cable and AC to DC Power Adapter & Battery Charger. Configured with: Power Pack (PP-1), Return Sweep Receiver (SR-1), Return Tester RSVP (VP-1), QAM (QA-2), Vertical Interval Test Signals (VITS), TraffiControl (TC-1) and Return Transmitter Board (RTB) Options
860 DSPi Field Analyzer

860 DSPi - US (PP-1, SA-1, QA-2, VITS & TC-1)

Configured with options

The 860 DSPi is a handheld spectrum analyzer with US DOCSIS 3.0 (8x4) modem that provides all of the testing power needed to ensure HFC networks operate to high standards. This includes balancing of the distribution system, maintaining analog and digital signal quality and controlling return path ingress. Standard Testing Features: 6 MHz Channel Spacing, Return Spectrum Analysis (4 to 65 MHz), Forward Spectrum Analysis (4 to 1000 MHz), Level Measurement, C/N Measurement, QAM Measurement (Level/MER/BER), Channel Plan Scan with Tilt Measurement, Ping, Trace Route, VoIP, Throughput, Cable Modem Statistics, Analog HUM, Depth of Modulation, CSO/CTB, FM Deviation, Sweepless Sweep, Line Viewer and QAM Source. Standard Communication Features: RF Test Port (F-Type, Replaceable), US DOCSIS 3.0 Modem 8x4 (100/304 MBPS), RJ45 Electrical Ethernet Port (10/100MBPS), CM to RJ-45 Mode. The complete kit includes: 860 DSPi Meter, Protective Carrying Case, Shoulder Strap, US AC Power Cable and AC to DC Power Adapter & Battery Charger. Configured with: Power Pack (PP-1), Spectrum Analyzer (SA-1), QAM (QA-2), Vertical Interval Test Signals (VITS) and TraffiControl (TC-1) Options
860 DSPi Field Analyzer

860 DSPi - US (PP-1, SR-1, SA-1, QA-2, VITS, TC-1 & RTB)

Configured with options

The 860 DSPi is a handheld spectrum analyzer with US DOCSIS 3.0 (8x4) modem that provides all of the testing power needed to ensure HFC networks operate to high standards. This includes balancing of the distribution system, maintaining analog and digital signal quality and controlling return path ingress. Standard Testing Features: 6 MHz Channel Spacing, Return Spectrum Analysis (4 to 65 MHz), Forward Spectrum Analysis (4 to 1000 MHz), Level Measurement, C/N Measurement, QAM Measurement (Level/MER/BER), Channel Plan Scan with Tilt Measurement, Ping, Trace Route, VoIP, Throughput, Cable Modem Statistics, Analog HUM, Depth of Modulation, CSO/CTB, FM Deviation, Sweepless Sweep, Line Viewer and QAM Source. Standard Communication Features: RF Test Port (F-Type, Replaceable), US DOCSIS 3.0 Modem 8x4 (100/304 MBPS), RJ45 Electrical Ethernet Port (10/100MBPS), CM to RJ-45 Mode. The complete kit includes: 860 DSPi Meter, Protective Carrying Case, Shoulder Strap, US AC Power Cable and AC to DC Power Adapter & Battery Charger. Configured with: Power Pack (PP-1), Return Sweep Receiver (SR-1), Spectrum Analyzer (SA-1), QAM (QA-2), Vertical Interval Test Signals (VITS), TraffiControl (TC-1) and Return Transmitter Board (RTB) Options
860 DSPi Field Analyzer

860 DSPi - US (PP-1, VP-1, SA-1, QA-2, VITS, TC-1 & RTB)

Configured with options

The 860 DSPi is a handheld spectrum analyzer with US DOCSIS 3.0 (8x4) modem that provides all of the testing power needed to ensure HFC networks operate to high standards. This includes balancing of the distribution system, maintaining analog and digital signal quality and controlling return path ingress. Standard Testing Features: 6 MHz Channel Spacing, Return Spectrum Analysis (4 to 65 MHz), Forward Spectrum Analysis (4 to 1000 MHz), Level Measurement, C/N Measurement, QAM Measurement (Level/MER/BER), Channel Plan Scan with Tilt Measurement, Ping, Trace Route, VoIP, Throughput, Cable Modem Statistics, Analog HUM, Depth of Modulation, CSO/CTB, FM Deviation, Sweepless Sweep, Line Viewer and QAM Source. Standard Communication Features: RF Test Port (F-Type, Replaceable), US DOCSIS 3.0 Modem 8x4 (100/304 MBPS), RJ45 Electrical Ethernet Port (10/100MBPS), CM to RJ-45 Mode. The complete kit includes: 860 DSPi Meter, Protective Carrying Case, Shoulder Strap, US AC Power Cable and AC to DC Power Adapter & Battery Charger. Configured with: Power Pack (PP-1), Return Tester RSVP (VP-1), Spectrum Analyzer (SA-1), QAM (QA-2), Vertical Interval Test Signals (VITS), TraffiControl (TC-1) and Return Transmitter Board (RTB) Options
860 DSPi Field Analyzer

860 DSPi - US (PP-1, SR-1, VP-1, SA-1, QA-2, VITS, TC-1 & RTB)

Configured with options

The 860 DSPi is a handheld spectrum analyzer with US DOCSIS 3.0 (8x4) modem that provides all of the testing power needed to ensure HFC networks operate to high standards. This includes balancing of the distribution system, maintaining analog and digital signal quality and controlling return path ingress. Standard Testing Features: 6 MHz Channel Spacing, Return Spectrum Analysis (4 to 65 MHz), Forward Spectrum Analysis (4 to 1000 MHz), Level Measurement, C/N Measurement, QAM Measurement (Level/MER/BER), Channel Plan Scan with Tilt Measurement, Ping, Trace Route, VoIP, Throughput, Cable Modem Statistics, Analog HUM, Depth of Modulation, CSO/CTB, FM Deviation, Sweepless Sweep, Line Viewer and QAM Source. Standard Communication Features: RF Test Port (F-Type, Replaceable), US DOCSIS 3.0 Modem 8x4 (100/304 MBPS), RJ45 Electrical Ethernet Port (10/100MBPS), CM to RJ-45 Mode. The complete kit includes: 860 DSPi Meter, Protective Carrying Case, Shoulder Strap, US AC Power Cable and AC to DC Power Adapter & Battery Charger. Configured with: Power Pack (PP-1), Return Sweep Receiver (SR-1), Return Tester RSVP (VP-1), Spectrum Analyzer (SA-1), QAM (QA-2), Vertical Interval Test Signals (VITS), TraffiControl (TC-1) and Return Transmitter Board (RTB) Options
860 DSPi Field Analyzer

860 DSPi - US (PP-1, VSB, VITS & TC-1)

Configured with options

The 860 DSPi is a handheld spectrum analyzer with US DOCSIS 3.0 (8x4) modem that provides all of the testing power needed to ensure HFC networks operate to high standards. This includes balancing of the distribution system, maintaining analog and digital signal quality and controlling return path ingress. Standard Testing Features: 6 MHz Channel Spacing, Return Spectrum Analysis (4 to 65 MHz), Forward Spectrum Analysis (4 to 1000 MHz), Level Measurement, C/N Measurement, QAM Measurement (Level/MER/BER), Channel Plan Scan with Tilt Measurement, Ping, Trace Route, VoIP, Throughput, Cable Modem Statistics, Analog HUM, Depth of Modulation, CSO/CTB, FM Deviation, Sweepless Sweep, Line Viewer and QAM Source. Standard Communication Features: RF Test Port (F-Type, Replaceable), US DOCSIS 3.0 Modem 8x4 (100/304 MBPS), RJ45 Electrical Ethernet Port (10/100MBPS), CM to RJ-45 Mode. The complete kit includes: 860 DSPi Meter, Protective Carrying Case, Shoulder Strap, US AC Power Cable and AC to DC Power Adapter & Battery Charger. Configured with: Power Pack (PP-1), Vestigial Side Band Modulation (VSB), Vertical Interval Test Signals (VITS) and TraffiControl (TC-1) Options
860 DSPi Field Analyzer

860 DSPi - US (PP-1, SR-1, VSB, VITS, TC-1 & RTB)

Configured with options

The 860 DSPi is a handheld spectrum analyzer with US DOCSIS 3.0 (8x4) modem that provides all of the testing power needed to ensure HFC networks operate to high standards. This includes balancing of the distribution system, maintaining analog and digital signal quality and controlling return path ingress. Standard Testing Features: 6 MHz Channel Spacing, Return Spectrum Analysis (4 to 65 MHz), Forward Spectrum Analysis (4 to 1000 MHz), Level Measurement, C/N Measurement, QAM Measurement (Level/MER/BER), Channel Plan Scan with Tilt Measurement, Ping, Trace Route, VoIP, Throughput, Cable Modem Statistics, Analog HUM, Depth of Modulation, CSO/CTB, FM Deviation, Sweepless Sweep, Line Viewer and QAM Source. Standard Communication Features: RF Test Port (F-Type, Replaceable), US DOCSIS 3.0 Modem 8x4 (100/304 MBPS), RJ45 Electrical Ethernet Port (10/100MBPS), CM to RJ-45 Mode. The complete kit includes: 860 DSPi Meter, Protective Carrying Case, Shoulder Strap, US AC Power Cable and AC to DC Power Adapter & Battery Charger. Configured with: Power Pack (PP-1), Return Sweep Receiver (SR-1), Vestigial Side Band Modulation (VSB), Vertical Interval Test Signals (VITS), TraffiControl (TC-1) and Return Transmitter Board (RTB) Options
860 DSPi Field Analyzer

860 DSPi - US (PP-1, VP-1, VSB, VITS, TC-1 & RTB)

Configured with options

The 860 DSPi is a handheld spectrum analyzer with US DOCSIS 3.0 (8x4) modem that provides all of the testing power needed to ensure HFC networks operate to high standards. This includes balancing of the distribution system, maintaining analog and digital signal quality and controlling return path ingress. Standard Testing Features: 6 MHz Channel Spacing, Return Spectrum Analysis (4 to 65 MHz), Forward Spectrum Analysis (4 to 1000 MHz), Level Measurement, C/N Measurement, QAM Measurement (Level/MER/BER), Channel Plan Scan with Tilt Measurement, Ping, Trace Route, VoIP, Throughput, Cable Modem Statistics, Analog HUM, Depth of Modulation, CSO/CTB, FM Deviation, Sweepless Sweep, Line Viewer and QAM Source. Standard Communication Features: RF Test Port (F-Type, Replaceable), US DOCSIS 3.0 Modem 8x4 (100/304 MBPS), RJ45 Electrical Ethernet Port (10/100MBPS), CM to RJ-45 Mode. The complete kit includes: 860 DSPi Meter, Protective Carrying Case, Shoulder Strap, US AC Power Cable and AC to DC Power Adapter & Battery Charger. Configured with: Power Pack (PP-1), Return Tester RSVP (VP-1), Vestigial Side Band Modulation (VSB), Vertical Interval Test Signals (VITS), TraffiControl (TC-1) and Return Transmitter Board (RTB) Options
860 DSPi Field Analyzer

860 DSPi - US (PP-1, SR-1, VP-1, VSB, VITS, TC-1 & RTB)

Configured with options

The 860 DSPi is a handheld spectrum analyzer with US DOCSIS 3.0 (8x4) modem that provides all of the testing power needed to ensure HFC networks operate to high standards. This includes balancing of the distribution system, maintaining analog and digital signal quality and controlling return path ingress. Standard Testing Features: 6 MHz Channel Spacing, Return Spectrum Analysis (4 to 65 MHz), Forward Spectrum Analysis (4 to 1000 MHz), Level Measurement, C/N Measurement, QAM Measurement (Level/MER/BER), Channel Plan Scan with Tilt Measurement, Ping, Trace Route, VoIP, Throughput, Cable Modem Statistics, Analog HUM, Depth of Modulation, CSO/CTB, FM Deviation, Sweepless Sweep, Line Viewer and QAM Source. Standard Communication Features: RF Test Port (F-Type, Replaceable), US DOCSIS 3.0 Modem 8x4 (100/304 MBPS), RJ45 Electrical Ethernet Port (10/100MBPS), CM to RJ-45 Mode. The complete kit includes: 860 DSPi Meter, Protective Carrying Case, Shoulder Strap, US AC Power Cable and AC to DC Power Adapter & Battery Charger. Configured with: Power Pack (PP-1), Return Sweep Receiver (SR-1), Return Tester RSVP (VP-1), Vestigial Side Band Modulation (VSB), Vertical Interval Test Signals (VITS), TraffiControl (TC-1) and Return Transmitter Board (RTB) Options
860 DSPi Field Analyzer

860 DSPi - US (PP-1, SA-1, VSB, VITS & TC-1)

Configured with options

The 860 DSPi is a handheld spectrum analyzer with US DOCSIS 3.0 (8x4) modem that provides all of the testing power needed to ensure HFC networks operate to high standards. This includes balancing of the distribution system, maintaining analog and digital signal quality and controlling return path ingress. Standard Testing Features: 6 MHz Channel Spacing, Return Spectrum Analysis (4 to 65 MHz), Forward Spectrum Analysis (4 to 1000 MHz), Level Measurement, C/N Measurement, QAM Measurement (Level/MER/BER), Channel Plan Scan with Tilt Measurement, Ping, Trace Route, VoIP, Throughput, Cable Modem Statistics, Analog HUM, Depth of Modulation, CSO/CTB, FM Deviation, Sweepless Sweep, Line Viewer and QAM Source. Standard Communication Features: RF Test Port (F-Type, Replaceable), US DOCSIS 3.0 Modem 8x4 (100/304 MBPS), RJ45 Electrical Ethernet Port (10/100MBPS), CM to RJ-45 Mode. The complete kit includes: 860 DSPi Meter, Protective Carrying Case, Shoulder Strap, US AC Power Cable and AC to DC Power Adapter & Battery Charger. Configured with: Power Pack (PP-1), Spectrum Analyzer (SA-1), Vestigial Side Band Modulation (VSB), Vertical Interval Test Signals (VITS) and TraffiControl (TC-1) Options
860 DSPi Field Analyzer

860 DSPi - US (PP-1, SR-1, SA-1, VSB, VITS, TC-1 & RTB)

Configured with options

The 860 DSPi is a handheld spectrum analyzer with US DOCSIS 3.0 (8x4) modem that provides all of the testing power needed to ensure HFC networks operate to high standards. This includes balancing of the distribution system, maintaining analog and digital signal quality and controlling return path ingress. Standard Testing Features: 6 MHz Channel Spacing, Return Spectrum Analysis (4 to 65 MHz), Forward Spectrum Analysis (4 to 1000 MHz), Level Measurement, C/N Measurement, QAM Measurement (Level/MER/BER), Channel Plan Scan with Tilt Measurement, Ping, Trace Route, VoIP, Throughput, Cable Modem Statistics, Analog HUM, Depth of Modulation, CSO/CTB, FM Deviation, Sweepless Sweep, Line Viewer and QAM Source. Standard Communication Features: RF Test Port (F-Type, Replaceable), US DOCSIS 3.0 Modem 8x4 (100/304 MBPS), RJ45 Electrical Ethernet Port (10/100MBPS), CM to RJ-45 Mode. The complete kit includes: 860 DSPi Meter, Protective Carrying Case, Shoulder Strap, US AC Power Cable and AC to DC Power Adapter & Battery Charger. Configured with: Power Pack (PP-1), Return Sweep Receiver (SR-1), Spectrum Analyzer (SA-1), Vestigial Side Band Modulation (VSB), Vertical Interval Test Signals (VITS), TraffiControl (TC-1) and Return Transmitter Board (RTB) Options
860 DSPi Field Analyzer

860 DSPi - US (PP-1, VP-1, SA-1, VSB, VITS, TC-1 & RTB)

Configured with options

The 860 DSPi is a handheld spectrum analyzer with US DOCSIS 3.0 (8x4) modem that provides all of the testing power needed to ensure HFC networks operate to high standards. This includes balancing of the distribution system, maintaining analog and digital signal quality and controlling return path ingress. Standard Testing Features: 6 MHz Channel Spacing, Return Spectrum Analysis (4 to 65 MHz), Forward Spectrum Analysis (4 to 1000 MHz), Level Measurement, C/N Measurement, QAM Measurement (Level/MER/BER), Channel Plan Scan with Tilt Measurement, Ping, Trace Route, VoIP, Throughput, Cable Modem Statistics, Analog HUM, Depth of Modulation, CSO/CTB, FM Deviation, Sweepless Sweep, Line Viewer and QAM Source. Standard Communication Features: RF Test Port (F-Type, Replaceable), US DOCSIS 3.0 Modem 8x4 (100/304 MBPS), RJ45 Electrical Ethernet Port (10/100MBPS), CM to RJ-45 Mode. The complete kit includes: 860 DSPi Meter, Protective Carrying Case, Shoulder Strap, US AC Power Cable and AC to DC Power Adapter & Battery Charger. Configured with: Power Pack (PP-1), Return Tester RSVP (VP-1), Spectrum Analyzer (SA-1), Vestigial Side Band Modulation (VSB), Vertical Interval Test Signals (VITS), TraffiControl (TC-1) and Return Transmitter Board (RTB) Options
860 DSPi Field Analyzer

860 DSPi - US (PP-1, SR-1, VP-1, SA-1, VSB, VITS, TC-1 & RTB)

Configured with options

The 860 DSPi is a handheld spectrum analyzer with US DOCSIS 3.0 (8x4) modem that provides all of the testing power needed to ensure HFC networks operate to high standards. This includes balancing of the distribution system, maintaining analog and digital signal quality and controlling return path ingress. Standard Testing Features: 6 MHz Channel Spacing, Return Spectrum Analysis (4 to 65 MHz), Forward Spectrum Analysis (4 to 1000 MHz), Level Measurement, C/N Measurement, QAM Measurement (Level/MER/BER), Channel Plan Scan with Tilt Measurement, Ping, Trace Route, VoIP, Throughput, Cable Modem Statistics, Analog HUM, Depth of Modulation, CSO/CTB, FM Deviation, Sweepless Sweep, Line Viewer and QAM Source. Standard Communication Features: RF Test Port (F-Type, Replaceable), US DOCSIS 3.0 Modem 8x4 (100/304 MBPS), RJ45 Electrical Ethernet Port (10/100MBPS), CM to RJ-45 Mode. The complete kit includes: 860 DSPi Meter, Protective Carrying Case, Shoulder Strap, US AC Power Cable and AC to DC Power Adapter & Battery Charger. Configured with: Power Pack (PP-1), Return Sweep Receiver (SR-1), Return Tester RSVP (VP-1), Spectrum Analyzer (SA-1), Vestigial Side Band Modulation (VSB), Vertical Interval Test Signals (VITS), TraffiControl (TC-1) and Return Transmitter Board (RTB) Options
860 DSPi Field Analyzer

860 DSPi - US (PP-1, QA-2, VSB, VITS & TC-1)

Configured with options

The 860 DSPi is a handheld spectrum analyzer with US DOCSIS 3.0 (8x4) modem that provides all of the testing power needed to ensure HFC networks operate to high standards. This includes balancing of the distribution system, maintaining analog and digital signal quality and controlling return path ingress. Standard Testing Features: 6 MHz Channel Spacing, Return Spectrum Analysis (4 to 65 MHz), Forward Spectrum Analysis (4 to 1000 MHz), Level Measurement, C/N Measurement, QAM Measurement (Level/MER/BER), Channel Plan Scan with Tilt Measurement, Ping, Trace Route, VoIP, Throughput, Cable Modem Statistics, Analog HUM, Depth of Modulation, CSO/CTB, FM Deviation, Sweepless Sweep, Line Viewer and QAM Source. Standard Communication Features: RF Test Port (F-Type, Replaceable), US DOCSIS 3.0 Modem 8x4 (100/304 MBPS), RJ45 Electrical Ethernet Port (10/100MBPS), CM to RJ-45 Mode. The complete kit includes: 860 DSPi Meter, Protective Carrying Case, Shoulder Strap, US AC Power Cable and AC to DC Power Adapter & Battery Charger. Configured with: Power Pack (PP-1), QAM (QA-2), Vestigial Side Band Modulation (VSB), Vertical Interval Test Signals (VITS) and TraffiControl (TC-1) Options
860 DSPi Field Analyzer

860 DSPi - US (PP-1, SR-1, QA-2, VSB, VITS, TC-1 & RTB)

Configured with options

The 860 DSPi is a handheld spectrum analyzer with US DOCSIS 3.0 (8x4) modem that provides all of the testing power needed to ensure HFC networks operate to high standards. This includes balancing of the distribution system, maintaining analog and digital signal quality and controlling return path ingress. Standard Testing Features: 6 MHz Channel Spacing, Return Spectrum Analysis (4 to 65 MHz), Forward Spectrum Analysis (4 to 1000 MHz), Level Measurement, C/N Measurement, QAM Measurement (Level/MER/BER), Channel Plan Scan with Tilt Measurement, Ping, Trace Route, VoIP, Throughput, Cable Modem Statistics, Analog HUM, Depth of Modulation, CSO/CTB, FM Deviation, Sweepless Sweep, Line Viewer and QAM Source. Standard Communication Features: RF Test Port (F-Type, Replaceable), US DOCSIS 3.0 Modem 8x4 (100/304 MBPS), RJ45 Electrical Ethernet Port (10/100MBPS), CM to RJ-45 Mode. The complete kit includes: 860 DSPi Meter, Protective Carrying Case, Shoulder Strap, US AC Power Cable and AC to DC Power Adapter & Battery Charger. Configured with: Power Pack (PP-1), Return Sweep Receiver (SR-1), QAM (QA-2), Vestigial Side Band Modulation (VSB), Vertical Interval Test Signals (VITS), TraffiControl (TC-1) and Return Transmitter Board (RTB) Options
860 DSPi Field Analyzer

860 DSPi - US (PP-1, VP-1, QA-2, VSB, VITS, TC-1 & RTB)

Configured with options

The 860 DSPi is a handheld spectrum analyzer with US DOCSIS 3.0 (8x4) modem that provides all of the testing power needed to ensure HFC networks operate to high standards. This includes balancing of the distribution system, maintaining analog and digital signal quality and controlling return path ingress. Standard Testing Features: 6 MHz Channel Spacing, Return Spectrum Analysis (4 to 65 MHz), Forward Spectrum Analysis (4 to 1000 MHz), Level Measurement, C/N Measurement, QAM Measurement (Level/MER/BER), Channel Plan Scan with Tilt Measurement, Ping, Trace Route, VoIP, Throughput, Cable Modem Statistics, Analog HUM, Depth of Modulation, CSO/CTB, FM Deviation, Sweepless Sweep, Line Viewer and QAM Source. Standard Communication Features: RF Test Port (F-Type, Replaceable), US DOCSIS 3.0 Modem 8x4 (100/304 MBPS), RJ45 Electrical Ethernet Port (10/100MBPS), CM to RJ-45 Mode. The complete kit includes: 860 DSPi Meter, Protective Carrying Case, Shoulder Strap, US AC Power Cable and AC to DC Power Adapter & Battery Charger. Configured with: Power Pack (PP-1), Return Tester RSVP (VP-1), QAM (QA-2), Vestigial Side Band Modulation (VSB), Vertical Interval Test Signals (VITS), TraffiControl (TC-1) and Return Transmitter Board (RTB) Options
860 DSPi Field Analyzer

860 DSPi - US (PP-1, SR-1, VP-1, QA-2, VSB, VITS, TC-1 & RTB)

Configured with options

The 860 DSPi is a handheld spectrum analyzer with US DOCSIS 3.0 (8x4) modem that provides all of the testing power needed to ensure HFC networks operate to high standards. This includes balancing of the distribution system, maintaining analog and digital signal quality and controlling return path ingress. Standard Testing Features: 6 MHz Channel Spacing, Return Spectrum Analysis (4 to 65 MHz), Forward Spectrum Analysis (4 to 1000 MHz), Level Measurement, C/N Measurement, QAM Measurement (Level/MER/BER), Channel Plan Scan with Tilt Measurement, Ping, Trace Route, VoIP, Throughput, Cable Modem Statistics, Analog HUM, Depth of Modulation, CSO/CTB, FM Deviation, Sweepless Sweep, Line Viewer and QAM Source. Standard Communication Features: RF Test Port (F-Type, Replaceable), US DOCSIS 3.0 Modem 8x4 (100/304 MBPS), RJ45 Electrical Ethernet Port (10/100MBPS), CM to RJ-45 Mode. The complete kit includes: 860 DSPi Meter, Protective Carrying Case, Shoulder Strap, US AC Power Cable and AC to DC Power Adapter & Battery Charger. Configured with: Power Pack (PP-1), Return Sweep Receiver (SR-1), Return Tester RSVP (VP-1), QAM (QA-2), Vestigial Side Band Modulation (VSB), Vertical Interval Test Signals (VITS), TraffiControl (TC-1) and Return Transmitter Board (RTB) Options
860 DSPi Field Analyzer

860 DSPi - US (PP-1, SA-1, QA-2, VSB, VITS & TC-1)

Configured with options

The 860 DSPi is a handheld spectrum analyzer with US DOCSIS 3.0 (8x4) modem that provides all of the testing power needed to ensure HFC networks operate to high standards. This includes balancing of the distribution system, maintaining analog and digital signal quality and controlling return path ingress. Standard Testing Features: 6 MHz Channel Spacing, Return Spectrum Analysis (4 to 65 MHz), Forward Spectrum Analysis (4 to 1000 MHz), Level Measurement, C/N Measurement, QAM Measurement (Level/MER/BER), Channel Plan Scan with Tilt Measurement, Ping, Trace Route, VoIP, Throughput, Cable Modem Statistics, Analog HUM, Depth of Modulation, CSO/CTB, FM Deviation, Sweepless Sweep, Line Viewer and QAM Source. Standard Communication Features: RF Test Port (F-Type, Replaceable), US DOCSIS 3.0 Modem 8x4 (100/304 MBPS), RJ45 Electrical Ethernet Port (10/100MBPS), CM to RJ-45 Mode. The complete kit includes: 860 DSPi Meter, Protective Carrying Case, Shoulder Strap, US AC Power Cable and AC to DC Power Adapter & Battery Charger. Configured with: Power Pack (PP-1), Spectrum Analyzer (SA-1), QAM (QA-2), Vestigial Side Band Modulation (VSB), Vertical Interval Test Signals (VITS) and TraffiControl (TC-1) Options
860 DSPi Field Analyzer

860 DSPi - US (PP-1, SR-1, SA-1, QA-2, VSB, VITS, TC-1 & RTB)

Configured with options

The 860 DSPi is a handheld spectrum analyzer with US DOCSIS 3.0 (8x4) modem that provides all of the testing power needed to ensure HFC networks operate to high standards. This includes balancing of the distribution system, maintaining analog and digital signal quality and controlling return path ingress. Standard Testing Features: 6 MHz Channel Spacing, Return Spectrum Analysis (4 to 65 MHz), Forward Spectrum Analysis (4 to 1000 MHz), Level Measurement, C/N Measurement, QAM Measurement (Level/MER/BER), Channel Plan Scan with Tilt Measurement, Ping, Trace Route, VoIP, Throughput, Cable Modem Statistics, Analog HUM, Depth of Modulation, CSO/CTB, FM Deviation, Sweepless Sweep, Line Viewer and QAM Source. Standard Communication Features: RF Test Port (F-Type, Replaceable), US DOCSIS 3.0 Modem 8x4 (100/304 MBPS), RJ45 Electrical Ethernet Port (10/100MBPS), CM to RJ-45 Mode. The complete kit includes: 860 DSPi Meter, Protective Carrying Case, Shoulder Strap, US AC Power Cable and AC to DC Power Adapter & Battery Charger. Configured with: Power Pack (PP-1), Return Sweep Receiver (SR-1), Spectrum Analyzer (SA-1), QAM (QA-2), Vestigial Side Band Modulation (VSB), Vertical Interval Test Signals (VITS), TraffiControl (TC-1) and Return Transmitter Board (RTB) Options
860 DSPi Field Analyzer

860 DSPi - US (PP-1, VP-1, SA-1, QA-2, VSB, VITS, TC-1 & RTB)

Configured with options

The 860 DSPi is a handheld spectrum analyzer with US DOCSIS 3.0 (8x4) modem that provides all of the testing power needed to ensure HFC networks operate to high standards. This includes balancing of the distribution system, maintaining analog and digital signal quality and controlling return path ingress. Standard Testing Features: 6 MHz Channel Spacing, Return Spectrum Analysis (4 to 65 MHz), Forward Spectrum Analysis (4 to 1000 MHz), Level Measurement, C/N Measurement, QAM Measurement (Level/MER/BER), Channel Plan Scan with Tilt Measurement, Ping, Trace Route, VoIP, Throughput, Cable Modem Statistics, Analog HUM, Depth of Modulation, CSO/CTB, FM Deviation, Sweepless Sweep, Line Viewer and QAM Source. Standard Communication Features: RF Test Port (F-Type, Replaceable), US DOCSIS 3.0 Modem 8x4 (100/304 MBPS), RJ45 Electrical Ethernet Port (10/100MBPS), CM to RJ-45 Mode. The complete kit includes: 860 DSPi Meter, Protective Carrying Case, Shoulder Strap, US AC Power Cable and AC to DC Power Adapter & Battery Charger. Configured with: Power Pack (PP-1), Return Tester RSVP (VP-1), Spectrum Analyzer (SA-1), QAM (QA-2), Vestigial Side Band Modulation (VSB), Vertical Interval Test Signals (VITS), TraffiControl (TC-1) and Return Transmitter Board (RTB) Options
860 DSPi Field Analyzer

860 DSPi - US (PP-1, SR-1, VP-1, SA-1, QA-2, VSB, VITS, TC-1 & RTB)

Configured with options

The 860 DSPi is a handheld spectrum analyzer with US DOCSIS 3.0 (8x4) modem that provides all of the testing power needed to ensure HFC networks operate to high standards. This includes balancing of the distribution system, maintaining analog and digital signal quality and controlling return path ingress. Standard Testing Features: 6 MHz Channel Spacing, Return Spectrum Analysis (4 to 65 MHz), Forward Spectrum Analysis (4 to 1000 MHz), Level Measurement, C/N Measurement, QAM Measurement (Level/MER/BER), Channel Plan Scan with Tilt Measurement, Ping, Trace Route, VoIP, Throughput, Cable Modem Statistics, Analog HUM, Depth of Modulation, CSO/CTB, FM Deviation, Sweepless Sweep, Line Viewer and QAM Source. Standard Communication Features: RF Test Port (F-Type, Replaceable), US DOCSIS 3.0 Modem 8x4 (100/304 MBPS), RJ45 Electrical Ethernet Port (10/100MBPS), CM to RJ-45 Mode. The complete kit includes: 860 DSPi Meter, Protective Carrying Case, Shoulder Strap, US AC Power Cable and AC to DC Power Adapter & Battery Charger. Configured with: Power Pack (PP-1), Return Sweep Receiver (SR-1), Return Tester RSVP (VP-1), Spectrum Analyzer (SA-1), QAM (QA-2), Vestigial Side Band Modulation (VSB), Vertical Interval Test Signals (VITS), TraffiControl (TC-1) and Return Transmitter Board (RTB) Options
860 DSPi Field Analyzer

860 DSPi - US (PP-1, FS-1, VITS & TC-1)

Configured with options

The 860 DSPi is a handheld spectrum analyzer with US DOCSIS 3.0 (8x4) modem that provides all of the testing power needed to ensure HFC networks operate to high standards. This includes balancing of the distribution system, maintaining analog and digital signal quality and controlling return path ingress. Standard Testing Features: 6 MHz Channel Spacing, Return Spectrum Analysis (4 to 65 MHz), Forward Spectrum Analysis (4 to 1000 MHz), Level Measurement, C/N Measurement, QAM Measurement (Level/MER/BER), Channel Plan Scan with Tilt Measurement, Ping, Trace Route, VoIP, Throughput, Cable Modem Statistics, Analog HUM, Depth of Modulation, CSO/CTB, FM Deviation, Sweepless Sweep, Line Viewer and QAM Source. Standard Communication Features: RF Test Port (F-Type, Replaceable), US DOCSIS 3.0 Modem 8x4 (100/304 MBPS), RJ45 Electrical Ethernet Port (10/100MBPS), CM to RJ-45 Mode. The complete kit includes: 860 DSPi Meter, Protective Carrying Case, Shoulder Strap, US AC Power Cable and AC to DC Power Adapter & Battery Charger. Configured with: Power Pack (PP-1), Forward Sweep (FS-1), Vertical Interval Test Signals (VITS) and TraffiControl (TC-1) Options
860 DSPi Field Analyzer

860 DSPi - US (PP-1, SR-1, FS-1, VITS, TC-1 & RTB)

Configured with options

The 860 DSPi is a handheld spectrum analyzer with US DOCSIS 3.0 (8x4) modem that provides all of the testing power needed to ensure HFC networks operate to high standards. This includes balancing of the distribution system, maintaining analog and digital signal quality and controlling return path ingress. Standard Testing Features: 6 MHz Channel Spacing, Return Spectrum Analysis (4 to 65 MHz), Forward Spectrum Analysis (4 to 1000 MHz), Level Measurement, C/N Measurement, QAM Measurement (Level/MER/BER), Channel Plan Scan with Tilt Measurement, Ping, Trace Route, VoIP, Throughput, Cable Modem Statistics, Analog HUM, Depth of Modulation, CSO/CTB, FM Deviation, Sweepless Sweep, Line Viewer and QAM Source. Standard Communication Features: RF Test Port (F-Type, Replaceable), US DOCSIS 3.0 Modem 8x4 (100/304 MBPS), RJ45 Electrical Ethernet Port (10/100MBPS), CM to RJ-45 Mode. The complete kit includes: 860 DSPi Meter, Protective Carrying Case, Shoulder Strap, US AC Power Cable and AC to DC Power Adapter & Battery Charger. Configured with: Power Pack (PP-1), Return Sweep Receiver (SR-1), Forward Sweep (FS-1), Vertical Interval Test Signals (VITS), TraffiControl (TC-1) and Return Transmitter Board (RTB) Options
860 DSPi Field Analyzer

860 DSPi - US (PP-1, VP-1, FS-1, VITS, TC-1 & RTB)

Configured with options

The 860 DSPi is a handheld spectrum analyzer with US DOCSIS 3.0 (8x4) modem that provides all of the testing power needed to ensure HFC networks operate to high standards. This includes balancing of the distribution system, maintaining analog and digital signal quality and controlling return path ingress. Standard Testing Features: 6 MHz Channel Spacing, Return Spectrum Analysis (4 to 65 MHz), Forward Spectrum Analysis (4 to 1000 MHz), Level Measurement, C/N Measurement, QAM Measurement (Level/MER/BER), Channel Plan Scan with Tilt Measurement, Ping, Trace Route, VoIP, Throughput, Cable Modem Statistics, Analog HUM, Depth of Modulation, CSO/CTB, FM Deviation, Sweepless Sweep, Line Viewer and QAM Source. Standard Communication Features: RF Test Port (F-Type, Replaceable), US DOCSIS 3.0 Modem 8x4 (100/304 MBPS), RJ45 Electrical Ethernet Port (10/100MBPS), CM to RJ-45 Mode. The complete kit includes: 860 DSPi Meter, Protective Carrying Case, Shoulder Strap, US AC Power Cable and AC to DC Power Adapter & Battery Charger. Configured with: Power Pack (PP-1), Return Tester RSVP (VP-1), Forward Sweep (FS-1), Vertical Interval Test Signals (VITS), TraffiControl (TC-1) and Return Transmitter Board (RTB) Options
860 DSPi Field Analyzer

860 DSPi - US (PP-1, SR-1, VP-1, FS-1, VITS, TC-1 & RTB)

Configured with options

The 860 DSPi is a handheld spectrum analyzer with US DOCSIS 3.0 (8x4) modem that provides all of the testing power needed to ensure HFC networks operate to high standards. This includes balancing of the distribution system, maintaining analog and digital signal quality and controlling return path ingress. Standard Testing Features: 6 MHz Channel Spacing, Return Spectrum Analysis (4 to 65 MHz), Forward Spectrum Analysis (4 to 1000 MHz), Level Measurement, C/N Measurement, QAM Measurement (Level/MER/BER), Channel Plan Scan with Tilt Measurement, Ping, Trace Route, VoIP, Throughput, Cable Modem Statistics, Analog HUM, Depth of Modulation, CSO/CTB, FM Deviation, Sweepless Sweep, Line Viewer and QAM Source. Standard Communication Features: RF Test Port (F-Type, Replaceable), US DOCSIS 3.0 Modem 8x4 (100/304 MBPS), RJ45 Electrical Ethernet Port (10/100MBPS), CM to RJ-45 Mode. The complete kit includes: 860 DSPi Meter, Protective Carrying Case, Shoulder Strap, US AC Power Cable and AC to DC Power Adapter & Battery Charger. Configured with: Power Pack (PP-1), Return Sweep Receiver (SR-1), Return Tester RSVP (VP-1), Forward Sweep (FS-1), Vertical Interval Test Signals (VITS), TraffiControl (TC-1) and Return Transmitter Board (RTB) Options
860 DSPi Field Analyzer

860 DSPi - US (PP-1, SA-1, FS-1, VITS & TC-1)

Configured with options

The 860 DSPi is a handheld spectrum analyzer with US DOCSIS 3.0 (8x4) modem that provides all of the testing power needed to ensure HFC networks operate to high standards. This includes balancing of the distribution system, maintaining analog and digital signal quality and controlling return path ingress. Standard Testing Features: 6 MHz Channel Spacing, Return Spectrum Analysis (4 to 65 MHz), Forward Spectrum Analysis (4 to 1000 MHz), Level Measurement, C/N Measurement, QAM Measurement (Level/MER/BER), Channel Plan Scan with Tilt Measurement, Ping, Trace Route, VoIP, Throughput, Cable Modem Statistics, Analog HUM, Depth of Modulation, CSO/CTB, FM Deviation, Sweepless Sweep, Line Viewer and QAM Source. Standard Communication Features: RF Test Port (F-Type, Replaceable), US DOCSIS 3.0 Modem 8x4 (100/304 MBPS), RJ45 Electrical Ethernet Port (10/100MBPS), CM to RJ-45 Mode. The complete kit includes: 860 DSPi Meter, Protective Carrying Case, Shoulder Strap, US AC Power Cable and AC to DC Power Adapter & Battery Charger. Configured with: Power Pack (PP-1), Spectrum Analyzer (SA-1), Forward Sweep (FS-1), Vertical Interval Test Signals (VITS) and TraffiControl (TC-1) Options
860 DSPi Field Analyzer

860 DSPi - US (PP-1, SR-1, SA-1, FS-1, VITS, TC-1 & RTB)

Configured with options

The 860 DSPi is a handheld spectrum analyzer with US DOCSIS 3.0 (8x4) modem that provides all of the testing power needed to ensure HFC networks operate to high standards. This includes balancing of the distribution system, maintaining analog and digital signal quality and controlling return path ingress. Standard Testing Features: 6 MHz Channel Spacing, Return Spectrum Analysis (4 to 65 MHz), Forward Spectrum Analysis (4 to 1000 MHz), Level Measurement, C/N Measurement, QAM Measurement (Level/MER/BER), Channel Plan Scan with Tilt Measurement, Ping, Trace Route, VoIP, Throughput, Cable Modem Statistics, Analog HUM, Depth of Modulation, CSO/CTB, FM Deviation, Sweepless Sweep, Line Viewer and QAM Source. Standard Communication Features: RF Test Port (F-Type, Replaceable), US DOCSIS 3.0 Modem 8x4 (100/304 MBPS), RJ45 Electrical Ethernet Port (10/100MBPS), CM to RJ-45 Mode. The complete kit includes: 860 DSPi Meter, Protective Carrying Case, Shoulder Strap, US AC Power Cable and AC to DC Power Adapter & Battery Charger. Configured with: Power Pack (PP-1), Return Sweep Receiver (SR-1), Spectrum Analyzer (SA-1), Forward Sweep (FS-1), Vertical Interval Test Signals (VITS), TraffiControl (TC-1) and Return Transmitter Board (RTB) Options
860 DSPi Field Analyzer

860 DSPi - US (PP-1, VP-1, SA-1, FS-1, VITS, TC-1 & RTB)

Configured with options

The 860 DSPi is a handheld spectrum analyzer with US DOCSIS 3.0 (8x4) modem that provides all of the testing power needed to ensure HFC networks operate to high standards. This includes balancing of the distribution system, maintaining analog and digital signal quality and controlling return path ingress. Standard Testing Features: 6 MHz Channel Spacing, Return Spectrum Analysis (4 to 65 MHz), Forward Spectrum Analysis (4 to 1000 MHz), Level Measurement, C/N Measurement, QAM Measurement (Level/MER/BER), Channel Plan Scan with Tilt Measurement, Ping, Trace Route, VoIP, Throughput, Cable Modem Statistics, Analog HUM, Depth of Modulation, CSO/CTB, FM Deviation, Sweepless Sweep, Line Viewer and QAM Source. Standard Communication Features: RF Test Port (F-Type, Replaceable), US DOCSIS 3.0 Modem 8x4 (100/304 MBPS), RJ45 Electrical Ethernet Port (10/100MBPS), CM to RJ-45 Mode. The complete kit includes: 860 DSPi Meter, Protective Carrying Case, Shoulder Strap, US AC Power Cable and AC to DC Power Adapter & Battery Charger. Configured with: Power Pack (PP-1), Return Tester RSVP (VP-1), Spectrum Analyzer (SA-1), Forward Sweep (FS-1), Vertical Interval Test Signals (VITS), TraffiControl (TC-1) and Return Transmitter Board (RTB) Options
860 DSPi Field Analyzer

860 DSPi - US (PP-1, SR-1, VP-1, SA-1, FS-1, VITS, TC-1 & RTB)

Configured with options

The 860 DSPi is a handheld spectrum analyzer with US DOCSIS 3.0 (8x4) modem that provides all of the testing power needed to ensure HFC networks operate to high standards. This includes balancing of the distribution system, maintaining analog and digital signal quality and controlling return path ingress. Standard Testing Features: 6 MHz Channel Spacing, Return Spectrum Analysis (4 to 65 MHz), Forward Spectrum Analysis (4 to 1000 MHz), Level Measurement, C/N Measurement, QAM Measurement (Level/MER/BER), Channel Plan Scan with Tilt Measurement, Ping, Trace Route, VoIP, Throughput, Cable Modem Statistics, Analog HUM, Depth of Modulation, CSO/CTB, FM Deviation, Sweepless Sweep, Line Viewer and QAM Source. Standard Communication Features: RF Test Port (F-Type, Replaceable), US DOCSIS 3.0 Modem 8x4 (100/304 MBPS), RJ45 Electrical Ethernet Port (10/100MBPS), CM to RJ-45 Mode. The complete kit includes: 860 DSPi Meter, Protective Carrying Case, Shoulder Strap, US AC Power Cable and AC to DC Power Adapter & Battery Charger. Configured with: Power Pack (PP-1), Return Sweep Receiver (SR-1), Return Tester RSVP (VP-1), Spectrum Analyzer (SA-1), Forward Sweep (FS-1), Vertical Interval Test Signals (VITS), TraffiControl (TC-1) and Return Transmitter Board (RTB) Options
860 DSPi Field Analyzer

860 DSPi - US (PP-1, QA-2, FS-1, VITS & TC-1)

Configured with options

The 860 DSPi is a handheld spectrum analyzer with US DOCSIS 3.0 (8x4) modem that provides all of the testing power needed to ensure HFC networks operate to high standards. This includes balancing of the distribution system, maintaining analog and digital signal quality and controlling return path ingress. Standard Testing Features: 6 MHz Channel Spacing, Return Spectrum Analysis (4 to 65 MHz), Forward Spectrum Analysis (4 to 1000 MHz), Level Measurement, C/N Measurement, QAM Measurement (Level/MER/BER), Channel Plan Scan with Tilt Measurement, Ping, Trace Route, VoIP, Throughput, Cable Modem Statistics, Analog HUM, Depth of Modulation, CSO/CTB, FM Deviation, Sweepless Sweep, Line Viewer and QAM Source. Standard Communication Features: RF Test Port (F-Type, Replaceable), US DOCSIS 3.0 Modem 8x4 (100/304 MBPS), RJ45 Electrical Ethernet Port (10/100MBPS), CM to RJ-45 Mode. The complete kit includes: 860 DSPi Meter, Protective Carrying Case, Shoulder Strap, US AC Power Cable and AC to DC Power Adapter & Battery Charger. Configured with: Power Pack (PP-1), QAM (QA-2), Forward Sweep (FS-1), Vertical Interval Test Signals (VITS) and TraffiControl (TC-1) Options
860 DSPi Field Analyzer

860 DSPi - US (PP-1, SR-1, QA-2, FS-1, VITS, TC-1 & RTB)

Configured with options

The 860 DSPi is a handheld spectrum analyzer with US DOCSIS 3.0 (8x4) modem that provides all of the testing power needed to ensure HFC networks operate to high standards. This includes balancing of the distribution system, maintaining analog and digital signal quality and controlling return path ingress. Standard Testing Features: 6 MHz Channel Spacing, Return Spectrum Analysis (4 to 65 MHz), Forward Spectrum Analysis (4 to 1000 MHz), Level Measurement, C/N Measurement, QAM Measurement (Level/MER/BER), Channel Plan Scan with Tilt Measurement, Ping, Trace Route, VoIP, Throughput, Cable Modem Statistics, Analog HUM, Depth of Modulation, CSO/CTB, FM Deviation, Sweepless Sweep, Line Viewer and QAM Source. Standard Communication Features: RF Test Port (F-Type, Replaceable), US DOCSIS 3.0 Modem 8x4 (100/304 MBPS), RJ45 Electrical Ethernet Port (10/100MBPS), CM to RJ-45 Mode. The complete kit includes: 860 DSPi Meter, Protective Carrying Case, Shoulder Strap, US AC Power Cable and AC to DC Power Adapter & Battery Charger. Configured with: Power Pack (PP-1), Return Sweep Receiver (SR-1), QAM (QA-2), Forward Sweep (FS-1), Vertical Interval Test Signals (VITS), TraffiControl (TC-1) and Return Transmitter Board (RTB) Options
860 DSPi Field Analyzer

860 DSPi - US (PP-1, VP-1, QA-2, FS-1, VITS, TC-1 & RTB)

Configured with options

The 860 DSPi is a handheld spectrum analyzer with US DOCSIS 3.0 (8x4) modem that provides all of the testing power needed to ensure HFC networks operate to high standards. This includes balancing of the distribution system, maintaining analog and digital signal quality and controlling return path ingress. Standard Testing Features: 6 MHz Channel Spacing, Return Spectrum Analysis (4 to 65 MHz), Forward Spectrum Analysis (4 to 1000 MHz), Level Measurement, C/N Measurement, QAM Measurement (Level/MER/BER), Channel Plan Scan with Tilt Measurement, Ping, Trace Route, VoIP, Throughput, Cable Modem Statistics, Analog HUM, Depth of Modulation, CSO/CTB, FM Deviation, Sweepless Sweep, Line Viewer and QAM Source. Standard Communication Features: RF Test Port (F-Type, Replaceable), US DOCSIS 3.0 Modem 8x4 (100/304 MBPS), RJ45 Electrical Ethernet Port (10/100MBPS), CM to RJ-45 Mode. The complete kit includes: 860 DSPi Meter, Protective Carrying Case, Shoulder Strap, US AC Power Cable and AC to DC Power Adapter & Battery Charger. Configured with: Power Pack (PP-1), Return Tester RSVP (VP-1), QAM (QA-2), Forward Sweep (FS-1), Vertical Interval Test Signals (VITS), TraffiControl (TC-1) and Return Transmitter Board (RTB) Options
860 DSPi Field Analyzer

860 DSPi - US (PP-1, SR-1, VP-1, QA-2, FS-1, VITS, TC-1 & RTB)

Configured with options

The 860 DSPi is a handheld spectrum analyzer with US DOCSIS 3.0 (8x4) modem that provides all of the testing power needed to ensure HFC networks operate to high standards. This includes balancing of the distribution system, maintaining analog and digital signal quality and controlling return path ingress. Standard Testing Features: 6 MHz Channel Spacing, Return Spectrum Analysis (4 to 65 MHz), Forward Spectrum Analysis (4 to 1000 MHz), Level Measurement, C/N Measurement, QAM Measurement (Level/MER/BER), Channel Plan Scan with Tilt Measurement, Ping, Trace Route, VoIP, Throughput, Cable Modem Statistics, Analog HUM, Depth of Modulation, CSO/CTB, FM Deviation, Sweepless Sweep, Line Viewer and QAM Source. Standard Communication Features: RF Test Port (F-Type, Replaceable), US DOCSIS 3.0 Modem 8x4 (100/304 MBPS), RJ45 Electrical Ethernet Port (10/100MBPS), CM to RJ-45 Mode. The complete kit includes: 860 DSPi Meter, Protective Carrying Case, Shoulder Strap, US AC Power Cable and AC to DC Power Adapter & Battery Charger. Configured with: Power Pack (PP-1), Return Sweep Receiver (SR-1), Return Tester RSVP (VP-1), QAM (QA-2), Forward Sweep (FS-1), Vertical Interval Test Signals (VITS), TraffiControl (TC-1) and Return Transmitter Board (RTB) Options
860 DSPi Field Analyzer

860 DSPi - US (PP-1, SA-1, QA-2, FS-1, VITS & TC-1)

Configured with options

The 860 DSPi is a handheld spectrum analyzer with US DOCSIS 3.0 (8x4) modem that provides all of the testing power needed to ensure HFC networks operate to high standards. This includes balancing of the distribution system, maintaining analog and digital signal quality and controlling return path ingress. Standard Testing Features: 6 MHz Channel Spacing, Return Spectrum Analysis (4 to 65 MHz), Forward Spectrum Analysis (4 to 1000 MHz), Level Measurement, C/N Measurement, QAM Measurement (Level/MER/BER), Channel Plan Scan with Tilt Measurement, Ping, Trace Route, VoIP, Throughput, Cable Modem Statistics, Analog HUM, Depth of Modulation, CSO/CTB, FM Deviation, Sweepless Sweep, Line Viewer and QAM Source. Standard Communication Features: RF Test Port (F-Type, Replaceable), US DOCSIS 3.0 Modem 8x4 (100/304 MBPS), RJ45 Electrical Ethernet Port (10/100MBPS), CM to RJ-45 Mode. The complete kit includes: 860 DSPi Meter, Protective Carrying Case, Shoulder Strap, US AC Power Cable and AC to DC Power Adapter & Battery Charger. Configured with: Power Pack (PP-1), Spectrum Analyzer (SA-1), QAM (QA-2), Forward Sweep (FS-1), Vertical Interval Test Signals (VITS) and TraffiControl (TC-1) Options
860 DSPi Field Analyzer

860 DSPi - US (PP-1, SR-1, SA-1, QA-2, FS-1, VITS, TC-1 & RTB)

Configured with options

The 860 DSPi is a handheld spectrum analyzer with US DOCSIS 3.0 (8x4) modem that provides all of the testing power needed to ensure HFC networks operate to high standards. This includes balancing of the distribution system, maintaining analog and digital signal quality and controlling return path ingress. Standard Testing Features: 6 MHz Channel Spacing, Return Spectrum Analysis (4 to 65 MHz), Forward Spectrum Analysis (4 to 1000 MHz), Level Measurement, C/N Measurement, QAM Measurement (Level/MER/BER), Channel Plan Scan with Tilt Measurement, Ping, Trace Route, VoIP, Throughput, Cable Modem Statistics, Analog HUM, Depth of Modulation, CSO/CTB, FM Deviation, Sweepless Sweep, Line Viewer and QAM Source. Standard Communication Features: RF Test Port (F-Type, Replaceable), US DOCSIS 3.0 Modem 8x4 (100/304 MBPS), RJ45 Electrical Ethernet Port (10/100MBPS), CM to RJ-45 Mode. The complete kit includes: 860 DSPi Meter, Protective Carrying Case, Shoulder Strap, US AC Power Cable and AC to DC Power Adapter & Battery Charger. Configured with: Power Pack (PP-1), Return Sweep Receiver (SR-1), Spectrum Analyzer (SA-1), QAM (QA-2), Forward Sweep (FS-1), Vertical Interval Test Signals (VITS), TraffiControl (TC-1) and Return Transmitter Board (RTB) Options
860 DSPi Field Analyzer

860 DSPi - US (PP-1, VP-1, SA-1, QA-2, FS-1, VITS, TC-1 & RTB)

Configured with options

The 860 DSPi is a handheld spectrum analyzer with US DOCSIS 3.0 (8x4) modem that provides all of the testing power needed to ensure HFC networks operate to high standards. This includes balancing of the distribution system, maintaining analog and digital signal quality and controlling return path ingress. Standard Testing Features: 6 MHz Channel Spacing, Return Spectrum Analysis (4 to 65 MHz), Forward Spectrum Analysis (4 to 1000 MHz), Level Measurement, C/N Measurement, QAM Measurement (Level/MER/BER), Channel Plan Scan with Tilt Measurement, Ping, Trace Route, VoIP, Throughput, Cable Modem Statistics, Analog HUM, Depth of Modulation, CSO/CTB, FM Deviation, Sweepless Sweep, Line Viewer and QAM Source. Standard Communication Features: RF Test Port (F-Type, Replaceable), US DOCSIS 3.0 Modem 8x4 (100/304 MBPS), RJ45 Electrical Ethernet Port (10/100MBPS), CM to RJ-45 Mode. The complete kit includes: 860 DSPi Meter, Protective Carrying Case, Shoulder Strap, US AC Power Cable and AC to DC Power Adapter & Battery Charger. Configured with: Power Pack (PP-1), Return Tester RSVP (VP-1), Spectrum Analyzer (SA-1), QAM (QA-2), Forward Sweep (FS-1), Vertical Interval Test Signals (VITS), TraffiControl (TC-1) and Return Transmitter Board (RTB) Options
860 DSPi Field Analyzer

860 DSPi - US (PP-1, SR-1, VP-1, SA-1, QA-2, FS-1, VITS, TC-1 & RTB)

Configured with options

The 860 DSPi is a handheld spectrum analyzer with US DOCSIS 3.0 (8x4) modem that provides all of the testing power needed to ensure HFC networks operate to high standards. This includes balancing of the distribution system, maintaining analog and digital signal quality and controlling return path ingress. Standard Testing Features: 6 MHz Channel Spacing, Return Spectrum Analysis (4 to 65 MHz), Forward Spectrum Analysis (4 to 1000 MHz), Level Measurement, C/N Measurement, QAM Measurement (Level/MER/BER), Channel Plan Scan with Tilt Measurement, Ping, Trace Route, VoIP, Throughput, Cable Modem Statistics, Analog HUM, Depth of Modulation, CSO/CTB, FM Deviation, Sweepless Sweep, Line Viewer and QAM Source. Standard Communication Features: RF Test Port (F-Type, Replaceable), US DOCSIS 3.0 Modem 8x4 (100/304 MBPS), RJ45 Electrical Ethernet Port (10/100MBPS), CM to RJ-45 Mode. The complete kit includes: 860 DSPi Meter, Protective Carrying Case, Shoulder Strap, US AC Power Cable and AC to DC Power Adapter & Battery Charger. Configured with: Power Pack (PP-1), Return Sweep Receiver (SR-1), Return Tester RSVP (VP-1), Spectrum Analyzer (SA-1), QAM (QA-2), Forward Sweep (FS-1), Vertical Interval Test Signals (VITS), TraffiControl (TC-1) and Return Transmitter Board (RTB) Options
860 DSPi Field Analyzer

860 DSPi - US (PP-1, VSB, FS-1, VITS & TC-1)

Configured with options

The 860 DSPi is a handheld spectrum analyzer with US DOCSIS 3.0 (8x4) modem that provides all of the testing power needed to ensure HFC networks operate to high standards. This includes balancing of the distribution system, maintaining analog and digital signal quality and controlling return path ingress. Standard Testing Features: 6 MHz Channel Spacing, Return Spectrum Analysis (4 to 65 MHz), Forward Spectrum Analysis (4 to 1000 MHz), Level Measurement, C/N Measurement, QAM Measurement (Level/MER/BER), Channel Plan Scan with Tilt Measurement, Ping, Trace Route, VoIP, Throughput, Cable Modem Statistics, Analog HUM, Depth of Modulation, CSO/CTB, FM Deviation, Sweepless Sweep, Line Viewer and QAM Source. Standard Communication Features: RF Test Port (F-Type, Replaceable), US DOCSIS 3.0 Modem 8x4 (100/304 MBPS), RJ45 Electrical Ethernet Port (10/100MBPS), CM to RJ-45 Mode. The complete kit includes: 860 DSPi Meter, Protective Carrying Case, Shoulder Strap, US AC Power Cable and AC to DC Power Adapter & Battery Charger. Configured with: Power Pack (PP-1), Vestigial Side Band Modulation (VSB), Forward Sweep (FS-1), Vertical Interval Test Signals (VITS) and TraffiControl (TC-1) Options
860 DSPi Field Analyzer

860 DSPi - US (PP-1, SR-1, VSB, FS-1, VITS, TC-1 & RTB)

Configured with options

The 860 DSPi is a handheld spectrum analyzer with US DOCSIS 3.0 (8x4) modem that provides all of the testing power needed to ensure HFC networks operate to high standards. This includes balancing of the distribution system, maintaining analog and digital signal quality and controlling return path ingress. Standard Testing Features: 6 MHz Channel Spacing, Return Spectrum Analysis (4 to 65 MHz), Forward Spectrum Analysis (4 to 1000 MHz), Level Measurement, C/N Measurement, QAM Measurement (Level/MER/BER), Channel Plan Scan with Tilt Measurement, Ping, Trace Route, VoIP, Throughput, Cable Modem Statistics, Analog HUM, Depth of Modulation, CSO/CTB, FM Deviation, Sweepless Sweep, Line Viewer and QAM Source. Standard Communication Features: RF Test Port (F-Type, Replaceable), US DOCSIS 3.0 Modem 8x4 (100/304 MBPS), RJ45 Electrical Ethernet Port (10/100MBPS), CM to RJ-45 Mode. The complete kit includes: 860 DSPi Meter, Protective Carrying Case, Shoulder Strap, US AC Power Cable and AC to DC Power Adapter & Battery Charger. Configured with: Power Pack (PP-1), Return Sweep Receiver (SR-1), Vestigial Side Band Modulation (VSB), Forward Sweep (FS-1), Vertical Interval Test Signals (VITS), TraffiControl (TC-1) and Return Transmitter Board (RTB) Options
860 DSPi Field Analyzer

860 DSPi - US (PP-1, VP-1, VSB, FS-1, VITS, TC-1 & RTB)

Configured with options

The 860 DSPi is a handheld spectrum analyzer with US DOCSIS 3.0 (8x4) modem that provides all of the testing power needed to ensure HFC networks operate to high standards. This includes balancing of the distribution system, maintaining analog and digital signal quality and controlling return path ingress. Standard Testing Features: 6 MHz Channel Spacing, Return Spectrum Analysis (4 to 65 MHz), Forward Spectrum Analysis (4 to 1000 MHz), Level Measurement, C/N Measurement, QAM Measurement (Level/MER/BER), Channel Plan Scan with Tilt Measurement, Ping, Trace Route, VoIP, Throughput, Cable Modem Statistics, Analog HUM, Depth of Modulation, CSO/CTB, FM Deviation, Sweepless Sweep, Line Viewer and QAM Source. Standard Communication Features: RF Test Port (F-Type, Replaceable), US DOCSIS 3.0 Modem 8x4 (100/304 MBPS), RJ45 Electrical Ethernet Port (10/100MBPS), CM to RJ-45 Mode. The complete kit includes: 860 DSPi Meter, Protective Carrying Case, Shoulder Strap, US AC Power Cable and AC to DC Power Adapter & Battery Charger. Configured with: Power Pack (PP-1), Return Tester RSVP (VP-1), Vestigial Side Band Modulation (VSB), Forward Sweep (FS-1), Vertical Interval Test Signals (VITS), TraffiControl (TC-1) and Return Transmitter Board (RTB) Options
860 DSPi Field Analyzer

860 DSPi - US (PP-1, SR-1, VP-1, VSB, FS-1, VITS, TC-1 & RTB)

Configured with options

The 860 DSPi is a handheld spectrum analyzer with US DOCSIS 3.0 (8x4) modem that provides all of the testing power needed to ensure HFC networks operate to high standards. This includes balancing of the distribution system, maintaining analog and digital signal quality and controlling return path ingress. Standard Testing Features: 6 MHz Channel Spacing, Return Spectrum Analysis (4 to 65 MHz), Forward Spectrum Analysis (4 to 1000 MHz), Level Measurement, C/N Measurement, QAM Measurement (Level/MER/BER), Channel Plan Scan with Tilt Measurement, Ping, Trace Route, VoIP, Throughput, Cable Modem Statistics, Analog HUM, Depth of Modulation, CSO/CTB, FM Deviation, Sweepless Sweep, Line Viewer and QAM Source. Standard Communication Features: RF Test Port (F-Type, Replaceable), US DOCSIS 3.0 Modem 8x4 (100/304 MBPS), RJ45 Electrical Ethernet Port (10/100MBPS), CM to RJ-45 Mode. The complete kit includes: 860 DSPi Meter, Protective Carrying Case, Shoulder Strap, US AC Power Cable and AC to DC Power Adapter & Battery Charger. Configured with: Power Pack (PP-1), Return Sweep Receiver (SR-1), Return Tester RSVP (VP-1), Vestigial Side Band Modulation (VSB), Forward Sweep (FS-1), Vertical Interval Test Signals (VITS), TraffiControl (TC-1) and Return Transmitter Board (RTB) Options
860 DSPi Field Analyzer

860 DSPi - US (PP-1, SA-1, VSB, FS-1, VITS & TC-1)

Configured with options

The 860 DSPi is a handheld spectrum analyzer with US DOCSIS 3.0 (8x4) modem that provides all of the testing power needed to ensure HFC networks operate to high standards. This includes balancing of the distribution system, maintaining analog and digital signal quality and controlling return path ingress. Standard Testing Features: 6 MHz Channel Spacing, Return Spectrum Analysis (4 to 65 MHz), Forward Spectrum Analysis (4 to 1000 MHz), Level Measurement, C/N Measurement, QAM Measurement (Level/MER/BER), Channel Plan Scan with Tilt Measurement, Ping, Trace Route, VoIP, Throughput, Cable Modem Statistics, Analog HUM, Depth of Modulation, CSO/CTB, FM Deviation, Sweepless Sweep, Line Viewer and QAM Source. Standard Communication Features: RF Test Port (F-Type, Replaceable), US DOCSIS 3.0 Modem 8x4 (100/304 MBPS), RJ45 Electrical Ethernet Port (10/100MBPS), CM to RJ-45 Mode. The complete kit includes: 860 DSPi Meter, Protective Carrying Case, Shoulder Strap, US AC Power Cable and AC to DC Power Adapter & Battery Charger. Configured with: Power Pack (PP-1), Spectrum Analyzer (SA-1), Vestigial Side Band Modulation (VSB), Forward Sweep (FS-1), Vertical Interval Test Signals (VITS) and TraffiControl (TC-1) Options
860 DSPi Field Analyzer

860 DSPi - US (PP-1, SR-1, SA-1, VSB, FS-1, VITS, TC-1 & RTB)

Configured with options

The 860 DSPi is a handheld spectrum analyzer with US DOCSIS 3.0 (8x4) modem that provides all of the testing power needed to ensure HFC networks operate to high standards. This includes balancing of the distribution system, maintaining analog and digital signal quality and controlling return path ingress. Standard Testing Features: 6 MHz Channel Spacing, Return Spectrum Analysis (4 to 65 MHz), Forward Spectrum Analysis (4 to 1000 MHz), Level Measurement, C/N Measurement, QAM Measurement (Level/MER/BER), Channel Plan Scan with Tilt Measurement, Ping, Trace Route, VoIP, Throughput, Cable Modem Statistics, Analog HUM, Depth of Modulation, CSO/CTB, FM Deviation, Sweepless Sweep, Line Viewer and QAM Source. Standard Communication Features: RF Test Port (F-Type, Replaceable), US DOCSIS 3.0 Modem 8x4 (100/304 MBPS), RJ45 Electrical Ethernet Port (10/100MBPS), CM to RJ-45 Mode. The complete kit includes: 860 DSPi Meter, Protective Carrying Case, Shoulder Strap, US AC Power Cable and AC to DC Power Adapter & Battery Charger. Configured with: Power Pack (PP-1), Return Sweep Receiver (SR-1), Spectrum Analyzer (SA-1), Vestigial Side Band Modulation (VSB), Forward Sweep (FS-1), Vertical Interval Test Signals (VITS), TraffiControl (TC-1) and Return Transmitter Board (RTB) Options
860 DSPi Field Analyzer

860 DSPi - US (PP-1, VP-1, SA-1, VSB, FS-1, VITS, TC-1 & RTB)

Configured with options

The 860 DSPi is a handheld spectrum analyzer with US DOCSIS 3.0 (8x4) modem that provides all of the testing power needed to ensure HFC networks operate to high standards. This includes balancing of the distribution system, maintaining analog and digital signal quality and controlling return path ingress. Standard Testing Features: 6 MHz Channel Spacing, Return Spectrum Analysis (4 to 65 MHz), Forward Spectrum Analysis (4 to 1000 MHz), Level Measurement, C/N Measurement, QAM Measurement (Level/MER/BER), Channel Plan Scan with Tilt Measurement, Ping, Trace Route, VoIP, Throughput, Cable Modem Statistics, Analog HUM, Depth of Modulation, CSO/CTB, FM Deviation, Sweepless Sweep, Line Viewer and QAM Source. Standard Communication Features: RF Test Port (F-Type, Replaceable), US DOCSIS 3.0 Modem 8x4 (100/304 MBPS), RJ45 Electrical Ethernet Port (10/100MBPS), CM to RJ-45 Mode. The complete kit includes: 860 DSPi Meter, Protective Carrying Case, Shoulder Strap, US AC Power Cable and AC to DC Power Adapter & Battery Charger. Configured with: Power Pack (PP-1), Return Tester RSVP (VP-1), Spectrum Analyzer (SA-1), Vestigial Side Band Modulation (VSB), Forward Sweep (FS-1), Vertical Interval Test Signals (VITS), TraffiControl (TC-1) and Return Transmitter Board (RTB) Options
860 DSPi Field Analyzer

860 DSPi - US (PP-1, SR-1, VP-1, SA-1, VSB, FS-1, VITS, TC-1 & RTB)

Configured with options

The 860 DSPi is a handheld spectrum analyzer with US DOCSIS 3.0 (8x4) modem that provides all of the testing power needed to ensure HFC networks operate to high standards. This includes balancing of the distribution system, maintaining analog and digital signal quality and controlling return path ingress. Standard Testing Features: 6 MHz Channel Spacing, Return Spectrum Analysis (4 to 65 MHz), Forward Spectrum Analysis (4 to 1000 MHz), Level Measurement, C/N Measurement, QAM Measurement (Level/MER/BER), Channel Plan Scan with Tilt Measurement, Ping, Trace Route, VoIP, Throughput, Cable Modem Statistics, Analog HUM, Depth of Modulation, CSO/CTB, FM Deviation, Sweepless Sweep, Line Viewer and QAM Source. Standard Communication Features: RF Test Port (F-Type, Replaceable), US DOCSIS 3.0 Modem 8x4 (100/304 MBPS), RJ45 Electrical Ethernet Port (10/100MBPS), CM to RJ-45 Mode. The complete kit includes: 860 DSPi Meter, Protective Carrying Case, Shoulder Strap, US AC Power Cable and AC to DC Power Adapter & Battery Charger. Configured with: Power Pack (PP-1), Return Sweep Receiver (SR-1), Return Tester RSVP (VP-1), Spectrum Analyzer (SA-1), Vestigial Side Band Modulation (VSB), Forward Sweep (FS-1), Vertical Interval Test Signals (VITS), TraffiControl (TC-1) and Return Transmitter Board (RTB) Options
860 DSPi Field Analyzer

860 DSPi - US (PP-1, QA-2, VSB, FS-1, VITS & TC-1)

Configured with options

The 860 DSPi is a handheld spectrum analyzer with US DOCSIS 3.0 (8x4) modem that provides all of the testing power needed to ensure HFC networks operate to high standards. This includes balancing of the distribution system, maintaining analog and digital signal quality and controlling return path ingress. Standard Testing Features: 6 MHz Channel Spacing, Return Spectrum Analysis (4 to 65 MHz), Forward Spectrum Analysis (4 to 1000 MHz), Level Measurement, C/N Measurement, QAM Measurement (Level/MER/BER), Channel Plan Scan with Tilt Measurement, Ping, Trace Route, VoIP, Throughput, Cable Modem Statistics, Analog HUM, Depth of Modulation, CSO/CTB, FM Deviation, Sweepless Sweep, Line Viewer and QAM Source. Standard Communication Features: RF Test Port (F-Type, Replaceable), US DOCSIS 3.0 Modem 8x4 (100/304 MBPS), RJ45 Electrical Ethernet Port (10/100MBPS), CM to RJ-45 Mode. The complete kit includes: 860 DSPi Meter, Protective Carrying Case, Shoulder Strap, US AC Power Cable and AC to DC Power Adapter & Battery Charger. Configured with: Power Pack (PP-1), QAM (QA-2), Vestigial Side Band Modulation (VSB), Forward Sweep (FS-1), Vertical Interval Test Signals (VITS) and TraffiControl (TC-1) Options
860 DSPi Field Analyzer

860 DSPi - US (PP-1, SR-1, QA-2, VSB, FS-1, VITS, TC-1 & RTB)

Configured with options

The 860 DSPi is a handheld spectrum analyzer with US DOCSIS 3.0 (8x4) modem that provides all of the testing power needed to ensure HFC networks operate to high standards. This includes balancing of the distribution system, maintaining analog and digital signal quality and controlling return path ingress. Standard Testing Features: 6 MHz Channel Spacing, Return Spectrum Analysis (4 to 65 MHz), Forward Spectrum Analysis (4 to 1000 MHz), Level Measurement, C/N Measurement, QAM Measurement (Level/MER/BER), Channel Plan Scan with Tilt Measurement, Ping, Trace Route, VoIP, Throughput, Cable Modem Statistics, Analog HUM, Depth of Modulation, CSO/CTB, FM Deviation, Sweepless Sweep, Line Viewer and QAM Source. Standard Communication Features: RF Test Port (F-Type, Replaceable), US DOCSIS 3.0 Modem 8x4 (100/304 MBPS), RJ45 Electrical Ethernet Port (10/100MBPS), CM to RJ-45 Mode. The complete kit includes: 860 DSPi Meter, Protective Carrying Case, Shoulder Strap, US AC Power Cable and AC to DC Power Adapter & Battery Charger. Configured with: Power Pack (PP-1), Return Sweep Receiver (SR-1), QAM (QA-2), Vestigial Side Band Modulation (VSB), Forward Sweep (FS-1), Vertical Interval Test Signals (VITS), TraffiControl (TC-1) and Return Transmitter Board (RTB) Options
860 DSPi Field Analyzer

860 DSPi - US (PP-1, VP-1, QA-2, VSB, FS-1, VITS, TC-1 & RTB)

Configured with options

The 860 DSPi is a handheld spectrum analyzer with US DOCSIS 3.0 (8x4) modem that provides all of the testing power needed to ensure HFC networks operate to high standards. This includes balancing of the distribution system, maintaining analog and digital signal quality and controlling return path ingress. Standard Testing Features: 6 MHz Channel Spacing, Return Spectrum Analysis (4 to 65 MHz), Forward Spectrum Analysis (4 to 1000 MHz), Level Measurement, C/N Measurement, QAM Measurement (Level/MER/BER), Channel Plan Scan with Tilt Measurement, Ping, Trace Route, VoIP, Throughput, Cable Modem Statistics, Analog HUM, Depth of Modulation, CSO/CTB, FM Deviation, Sweepless Sweep, Line Viewer and QAM Source. Standard Communication Features: RF Test Port (F-Type, Replaceable), US DOCSIS 3.0 Modem 8x4 (100/304 MBPS), RJ45 Electrical Ethernet Port (10/100MBPS), CM to RJ-45 Mode. The complete kit includes: 860 DSPi Meter, Protective Carrying Case, Shoulder Strap, US AC Power Cable and AC to DC Power Adapter & Battery Charger. Configured with: Power Pack (PP-1), Return Tester RSVP (VP-1), QAM (QA-2), Vestigial Side Band Modulation (VSB), Forward Sweep (FS-1), Vertical Interval Test Signals (VITS), TraffiControl (TC-1) and Return Transmitter Board (RTB) Options
860 DSPi Field Analyzer

860 DSPi - US (PP-1, SR-1, VP-1, QA-2, VSB, FS-1, VITS, TC-1 & RTB)

Configured with options

The 860 DSPi is a handheld spectrum analyzer with US DOCSIS 3.0 (8x4) modem that provides all of the testing power needed to ensure HFC networks operate to high standards. This includes balancing of the distribution system, maintaining analog and digital signal quality and controlling return path ingress. Standard Testing Features: 6 MHz Channel Spacing, Return Spectrum Analysis (4 to 65 MHz), Forward Spectrum Analysis (4 to 1000 MHz), Level Measurement, C/N Measurement, QAM Measurement (Level/MER/BER), Channel Plan Scan with Tilt Measurement, Ping, Trace Route, VoIP, Throughput, Cable Modem Statistics, Analog HUM, Depth of Modulation, CSO/CTB, FM Deviation, Sweepless Sweep, Line Viewer and QAM Source. Standard Communication Features: RF Test Port (F-Type, Replaceable), US DOCSIS 3.0 Modem 8x4 (100/304 MBPS), RJ45 Electrical Ethernet Port (10/100MBPS), CM to RJ-45 Mode. The complete kit includes: 860 DSPi Meter, Protective Carrying Case, Shoulder Strap, US AC Power Cable and AC to DC Power Adapter & Battery Charger. Configured with: Power Pack (PP-1), Return Sweep Receiver (SR-1), Return Tester RSVP (VP-1), QAM (QA-2), Vestigial Side Band Modulation (VSB), Forward Sweep (FS-1), Vertical Interval Test Signals (VITS), TraffiControl (TC-1) and Return Transmitter Board (RTB) Options
860 DSPi Field Analyzer

860 DSPi - US (PP-1, SA-1, QA-2, VSB, FS-1, VITS & TC-1)

Configured with options

The 860 DSPi is a handheld spectrum analyzer with US DOCSIS 3.0 (8x4) modem that provides all of the testing power needed to ensure HFC networks operate to high standards. This includes balancing of the distribution system, maintaining analog and digital signal quality and controlling return path ingress. Standard Testing Features: 6 MHz Channel Spacing, Return Spectrum Analysis (4 to 65 MHz), Forward Spectrum Analysis (4 to 1000 MHz), Level Measurement, C/N Measurement, QAM Measurement (Level/MER/BER), Channel Plan Scan with Tilt Measurement, Ping, Trace Route, VoIP, Throughput, Cable Modem Statistics, Analog HUM, Depth of Modulation, CSO/CTB, FM Deviation, Sweepless Sweep, Line Viewer and QAM Source. Standard Communication Features: RF Test Port (F-Type, Replaceable), US DOCSIS 3.0 Modem 8x4 (100/304 MBPS), RJ45 Electrical Ethernet Port (10/100MBPS), CM to RJ-45 Mode. The complete kit includes: 860 DSPi Meter, Protective Carrying Case, Shoulder Strap, US AC Power Cable and AC to DC Power Adapter & Battery Charger. Configured with: Power Pack (PP-1), Spectrum Analyzer (SA-1), QAM (QA-2), Vestigial Side Band Modulation (VSB), Forward Sweep (FS-1), Vertical Interval Test Signals (VITS) and TraffiControl (TC-1) Options
860 DSPi Field Analyzer

860 DSPi - US (PP-1, SR-1, SA-1, QA-2, VSB, FS-1, VITS, TC-1 & RTB)

Configured with options

The 860 DSPi is a handheld spectrum analyzer with US DOCSIS 3.0 (8x4) modem that provides all of the testing power needed to ensure HFC networks operate to high standards. This includes balancing of the distribution system, maintaining analog and digital signal quality and controlling return path ingress. Standard Testing Features: 6 MHz Channel Spacing, Return Spectrum Analysis (4 to 65 MHz), Forward Spectrum Analysis (4 to 1000 MHz), Level Measurement, C/N Measurement, QAM Measurement (Level/MER/BER), Channel Plan Scan with Tilt Measurement, Ping, Trace Route, VoIP, Throughput, Cable Modem Statistics, Analog HUM, Depth of Modulation, CSO/CTB, FM Deviation, Sweepless Sweep, Line Viewer and QAM Source. Standard Communication Features: RF Test Port (F-Type, Replaceable), US DOCSIS 3.0 Modem 8x4 (100/304 MBPS), RJ45 Electrical Ethernet Port (10/100MBPS), CM to RJ-45 Mode. The complete kit includes: 860 DSPi Meter, Protective Carrying Case, Shoulder Strap, US AC Power Cable and AC to DC Power Adapter & Battery Charger. Configured with: Power Pack (PP-1), Return Sweep Receiver (SR-1), Spectrum Analyzer (SA-1), QAM (QA-2), Vestigial Side Band Modulation (VSB), Forward Sweep (FS-1), Vertical Interval Test Signals (VITS), TraffiControl (TC-1) and Return Transmitter Board (RTB) Options
860 DSPi Field Analyzer

860 DSPi - US (PP-1, VP-1, SA-1, QA-2, VSB, FS-1, VITS, TC-1 & RTB)

Configured with options

The 860 DSPi is a handheld spectrum analyzer with US DOCSIS 3.0 (8x4) modem that provides all of the testing power needed to ensure HFC networks operate to high standards. This includes balancing of the distribution system, maintaining analog and digital signal quality and controlling return path ingress. Standard Testing Features: 6 MHz Channel Spacing, Return Spectrum Analysis (4 to 65 MHz), Forward Spectrum Analysis (4 to 1000 MHz), Level Measurement, C/N Measurement, QAM Measurement (Level/MER/BER), Channel Plan Scan with Tilt Measurement, Ping, Trace Route, VoIP, Throughput, Cable Modem Statistics, Analog HUM, Depth of Modulation, CSO/CTB, FM Deviation, Sweepless Sweep, Line Viewer and QAM Source. Standard Communication Features: RF Test Port (F-Type, Replaceable), US DOCSIS 3.0 Modem 8x4 (100/304 MBPS), RJ45 Electrical Ethernet Port (10/100MBPS), CM to RJ-45 Mode. The complete kit includes: 860 DSPi Meter, Protective Carrying Case, Shoulder Strap, US AC Power Cable and AC to DC Power Adapter & Battery Charger. Configured with: Power Pack (PP-1), Return Tester RSVP (VP-1), Spectrum Analyzer (SA-1), QAM (QA-2), Vestigial Side Band Modulation (VSB), Forward Sweep (FS-1), Vertical Interval Test Signals (VITS), TraffiControl (TC-1) and Return Transmitter Board (RTB) Options
860 DSPi Field Analyzer

860 DSPi - US (PP-1, SR-1, VP-1, SA-1, QA-2, VSB, FS-1, VITS, TC-1 & RTB)

Configured with options

The 860 DSPi is a handheld spectrum analyzer with US DOCSIS 3.0 (8x4) modem that provides all of the testing power needed to ensure HFC networks operate to high standards. This includes balancing of the distribution system, maintaining analog and digital signal quality and controlling return path ingress. Standard Testing Features: 6 MHz Channel Spacing, Return Spectrum Analysis (4 to 65 MHz), Forward Spectrum Analysis (4 to 1000 MHz), Level Measurement, C/N Measurement, QAM Measurement (Level/MER/BER), Channel Plan Scan with Tilt Measurement, Ping, Trace Route, VoIP, Throughput, Cable Modem Statistics, Analog HUM, Depth of Modulation, CSO/CTB, FM Deviation, Sweepless Sweep, Line Viewer and QAM Source. Standard Communication Features: RF Test Port (F-Type, Replaceable), US DOCSIS 3.0 Modem 8x4 (100/304 MBPS), RJ45 Electrical Ethernet Port (10/100MBPS), CM to RJ-45 Mode. The complete kit includes: 860 DSPi Meter, Protective Carrying Case, Shoulder Strap, US AC Power Cable and AC to DC Power Adapter & Battery Charger. Configured with: Power Pack (PP-1), Return Sweep Receiver (SR-1), Return Tester RSVP (VP-1), Spectrum Analyzer (SA-1), QAM (QA-2), Vestigial Side Band Modulation (VSB), Forward Sweep (FS-1), Vertical Interval Test Signals (VITS), TraffiControl (TC-1) and Return Transmitter Board (RTB) Options
860 DSPi Field Analyzer

860 DSPi - US (PP-1, FDR-1 & RTB)

Configured with options

The 860 DSPi is a handheld spectrum analyzer with US DOCSIS 3.0 (8x4) modem that provides all of the testing power needed to ensure HFC networks operate to high standards. This includes balancing of the distribution system, maintaining analog and digital signal quality and controlling return path ingress. Standard Testing Features: 6 MHz Channel Spacing, Return Spectrum Analysis (4 to 65 MHz), Forward Spectrum Analysis (4 to 1000 MHz), Level Measurement, C/N Measurement, QAM Measurement (Level/MER/BER), Channel Plan Scan with Tilt Measurement, Ping, Trace Route, VoIP, Throughput, Cable Modem Statistics, Analog HUM, Depth of Modulation, CSO/CTB, FM Deviation, Sweepless Sweep, Line Viewer and QAM Source. Standard Communication Features: RF Test Port (F-Type, Replaceable), US DOCSIS 3.0 Modem 8x4 (100/304 MBPS), RJ45 Electrical Ethernet Port (10/100MBPS), CM to RJ-45 Mode. The complete kit includes: 860 DSPi Meter, Protective Carrying Case, Shoulder Strap, US AC Power Cable and AC to DC Power Adapter & Battery Charger. Configured with: Power Pack (PP-1), Frequency Domain Reflectometer (FDR-1) and Return Transmitter Board (RTB) Options
860 DSPi Field Analyzer

860 DSPi - US (PP-1, SR-1, FDR-1 & RTB)

Configured with options

The 860 DSPi is a handheld spectrum analyzer with US DOCSIS 3.0 (8x4) modem that provides all of the testing power needed to ensure HFC networks operate to high standards. This includes balancing of the distribution system, maintaining analog and digital signal quality and controlling return path ingress. Standard Testing Features: 6 MHz Channel Spacing, Return Spectrum Analysis (4 to 65 MHz), Forward Spectrum Analysis (4 to 1000 MHz), Level Measurement, C/N Measurement, QAM Measurement (Level/MER/BER), Channel Plan Scan with Tilt Measurement, Ping, Trace Route, VoIP, Throughput, Cable Modem Statistics, Analog HUM, Depth of Modulation, CSO/CTB, FM Deviation, Sweepless Sweep, Line Viewer and QAM Source. Standard Communication Features: RF Test Port (F-Type, Replaceable), US DOCSIS 3.0 Modem 8x4 (100/304 MBPS), RJ45 Electrical Ethernet Port (10/100MBPS), CM to RJ-45 Mode. The complete kit includes: 860 DSPi Meter, Protective Carrying Case, Shoulder Strap, US AC Power Cable and AC to DC Power Adapter & Battery Charger. Configured with: Power Pack (PP-1), Return Sweep Receiver (SR-1), Frequency Domain Reflectometer (FDR-1) and Return Transmitter Board (RTB) Options
860 DSPi Field Analyzer

860 DSPi - US (PP-1, VP-1, FDR-1 & RTB)

Configured with options

The 860 DSPi is a handheld spectrum analyzer with US DOCSIS 3.0 (8x4) modem that provides all of the testing power needed to ensure HFC networks operate to high standards. This includes balancing of the distribution system, maintaining analog and digital signal quality and controlling return path ingress. Standard Testing Features: 6 MHz Channel Spacing, Return Spectrum Analysis (4 to 65 MHz), Forward Spectrum Analysis (4 to 1000 MHz), Level Measurement, C/N Measurement, QAM Measurement (Level/MER/BER), Channel Plan Scan with Tilt Measurement, Ping, Trace Route, VoIP, Throughput, Cable Modem Statistics, Analog HUM, Depth of Modulation, CSO/CTB, FM Deviation, Sweepless Sweep, Line Viewer and QAM Source. Standard Communication Features: RF Test Port (F-Type, Replaceable), US DOCSIS 3.0 Modem 8x4 (100/304 MBPS), RJ45 Electrical Ethernet Port (10/100MBPS), CM to RJ-45 Mode. The complete kit includes: 860 DSPi Meter, Protective Carrying Case, Shoulder Strap, US AC Power Cable and AC to DC Power Adapter & Battery Charger. Configured with: Power Pack (PP-1), Return Tester RSVP (VP-1), Frequency Domain Reflectometer (FDR-1) and Return Transmitter Board (RTB) Options
860 DSPi Field Analyzer

860 DSPi - US (PP-1, SR-1, VP-1, FDR-1 & RTB)

Configured with options

The 860 DSPi is a handheld spectrum analyzer with US DOCSIS 3.0 (8x4) modem that provides all of the testing power needed to ensure HFC networks operate to high standards. This includes balancing of the distribution system, maintaining analog and digital signal quality and controlling return path ingress. Standard Testing Features: 6 MHz Channel Spacing, Return Spectrum Analysis (4 to 65 MHz), Forward Spectrum Analysis (4 to 1000 MHz), Level Measurement, C/N Measurement, QAM Measurement (Level/MER/BER), Channel Plan Scan with Tilt Measurement, Ping, Trace Route, VoIP, Throughput, Cable Modem Statistics, Analog HUM, Depth of Modulation, CSO/CTB, FM Deviation, Sweepless Sweep, Line Viewer and QAM Source. Standard Communication Features: RF Test Port (F-Type, Replaceable), US DOCSIS 3.0 Modem 8x4 (100/304 MBPS), RJ45 Electrical Ethernet Port (10/100MBPS), CM to RJ-45 Mode. The complete kit includes: 860 DSPi Meter, Protective Carrying Case, Shoulder Strap, US AC Power Cable and AC to DC Power Adapter & Battery Charger. Configured with: Power Pack (PP-1), Return Sweep Receiver (SR-1), Return Tester RSVP (VP-1), Frequency Domain Reflectometer (FDR-1) and Return Transmitter Board (RTB) Options
860 DSPi Field Analyzer

860 DSPi - US (PP-1, SA-1, FDR-1 & RTB)

Configured with options

The 860 DSPi is a handheld spectrum analyzer with US DOCSIS 3.0 (8x4) modem that provides all of the testing power needed to ensure HFC networks operate to high standards. This includes balancing of the distribution system, maintaining analog and digital signal quality and controlling return path ingress. Standard Testing Features: 6 MHz Channel Spacing, Return Spectrum Analysis (4 to 65 MHz), Forward Spectrum Analysis (4 to 1000 MHz), Level Measurement, C/N Measurement, QAM Measurement (Level/MER/BER), Channel Plan Scan with Tilt Measurement, Ping, Trace Route, VoIP, Throughput, Cable Modem Statistics, Analog HUM, Depth of Modulation, CSO/CTB, FM Deviation, Sweepless Sweep, Line Viewer and QAM Source. Standard Communication Features: RF Test Port (F-Type, Replaceable), US DOCSIS 3.0 Modem 8x4 (100/304 MBPS), RJ45 Electrical Ethernet Port (10/100MBPS), CM to RJ-45 Mode. The complete kit includes: 860 DSPi Meter, Protective Carrying Case, Shoulder Strap, US AC Power Cable and AC to DC Power Adapter & Battery Charger. Configured with: Power Pack (PP-1), Spectrum Analyzer (SA-1), Frequency Domain Reflectometer (FDR-1) and Return Transmitter Board (RTB) Options
860 DSPi Field Analyzer

860 DSPi - US (PP-1, SR-1, SA-1, FDR-1 & RTB)

Configured with options

The 860 DSPi is a handheld spectrum analyzer with US DOCSIS 3.0 (8x4) modem that provides all of the testing power needed to ensure HFC networks operate to high standards. This includes balancing of the distribution system, maintaining analog and digital signal quality and controlling return path ingress. Standard Testing Features: 6 MHz Channel Spacing, Return Spectrum Analysis (4 to 65 MHz), Forward Spectrum Analysis (4 to 1000 MHz), Level Measurement, C/N Measurement, QAM Measurement (Level/MER/BER), Channel Plan Scan with Tilt Measurement, Ping, Trace Route, VoIP, Throughput, Cable Modem Statistics, Analog HUM, Depth of Modulation, CSO/CTB, FM Deviation, Sweepless Sweep, Line Viewer and QAM Source. Standard Communication Features: RF Test Port (F-Type, Replaceable), US DOCSIS 3.0 Modem 8x4 (100/304 MBPS), RJ45 Electrical Ethernet Port (10/100MBPS), CM to RJ-45 Mode. The complete kit includes: 860 DSPi Meter, Protective Carrying Case, Shoulder Strap, US AC Power Cable and AC to DC Power Adapter & Battery Charger. Configured with: Power Pack (PP-1), Return Sweep Receiver (SR-1), Spectrum Analyzer (SA-1), Frequency Domain Reflectometer (FDR-1) and Return Transmitter Board (RTB) Options
860 DSPi Field Analyzer

860 DSPi - US (PP-1, VP-1, SA-1, FDR-1 & RTB)

Configured with options

The 860 DSPi is a handheld spectrum analyzer with US DOCSIS 3.0 (8x4) modem that provides all of the testing power needed to ensure HFC networks operate to high standards. This includes balancing of the distribution system, maintaining analog and digital signal quality and controlling return path ingress. Standard Testing Features: 6 MHz Channel Spacing, Return Spectrum Analysis (4 to 65 MHz), Forward Spectrum Analysis (4 to 1000 MHz), Level Measurement, C/N Measurement, QAM Measurement (Level/MER/BER), Channel Plan Scan with Tilt Measurement, Ping, Trace Route, VoIP, Throughput, Cable Modem Statistics, Analog HUM, Depth of Modulation, CSO/CTB, FM Deviation, Sweepless Sweep, Line Viewer and QAM Source. Standard Communication Features: RF Test Port (F-Type, Replaceable), US DOCSIS 3.0 Modem 8x4 (100/304 MBPS), RJ45 Electrical Ethernet Port (10/100MBPS), CM to RJ-45 Mode. The complete kit includes: 860 DSPi Meter, Protective Carrying Case, Shoulder Strap, US AC Power Cable and AC to DC Power Adapter & Battery Charger. Configured with: Power Pack (PP-1), Return Tester RSVP (VP-1), Spectrum Analyzer (SA-1), Frequency Domain Reflectometer (FDR-1) and Return Transmitter Board (RTB) Options
860 DSPi Field Analyzer

860 DSPi - US (PP-1, SR-1, VP-1, SA-1, FDR-1 & RTB)

Configured with options

The 860 DSPi is a handheld spectrum analyzer with US DOCSIS 3.0 (8x4) modem that provides all of the testing power needed to ensure HFC networks operate to high standards. This includes balancing of the distribution system, maintaining analog and digital signal quality and controlling return path ingress. Standard Testing Features: 6 MHz Channel Spacing, Return Spectrum Analysis (4 to 65 MHz), Forward Spectrum Analysis (4 to 1000 MHz), Level Measurement, C/N Measurement, QAM Measurement (Level/MER/BER), Channel Plan Scan with Tilt Measurement, Ping, Trace Route, VoIP, Throughput, Cable Modem Statistics, Analog HUM, Depth of Modulation, CSO/CTB, FM Deviation, Sweepless Sweep, Line Viewer and QAM Source. Standard Communication Features: RF Test Port (F-Type, Replaceable), US DOCSIS 3.0 Modem 8x4 (100/304 MBPS), RJ45 Electrical Ethernet Port (10/100MBPS), CM to RJ-45 Mode. The complete kit includes: 860 DSPi Meter, Protective Carrying Case, Shoulder Strap, US AC Power Cable and AC to DC Power Adapter & Battery Charger. Configured with: Power Pack (PP-1), Return Sweep Receiver (SR-1), Return Tester RSVP (VP-1), Spectrum Analyzer (SA-1), Frequency Domain Reflectometer (FDR-1) and Return Transmitter Board (RTB) Options
860 DSPi Field Analyzer

860 DSPi - US (PP-1, QA-2, FDR-1 & RTB)

Configured with options

The 860 DSPi is a handheld spectrum analyzer with US DOCSIS 3.0 (8x4) modem that provides all of the testing power needed to ensure HFC networks operate to high standards. This includes balancing of the distribution system, maintaining analog and digital signal quality and controlling return path ingress. Standard Testing Features: 6 MHz Channel Spacing, Return Spectrum Analysis (4 to 65 MHz), Forward Spectrum Analysis (4 to 1000 MHz), Level Measurement, C/N Measurement, QAM Measurement (Level/MER/BER), Channel Plan Scan with Tilt Measurement, Ping, Trace Route, VoIP, Throughput, Cable Modem Statistics, Analog HUM, Depth of Modulation, CSO/CTB, FM Deviation, Sweepless Sweep, Line Viewer and QAM Source. Standard Communication Features: RF Test Port (F-Type, Replaceable), US DOCSIS 3.0 Modem 8x4 (100/304 MBPS), RJ45 Electrical Ethernet Port (10/100MBPS), CM to RJ-45 Mode. The complete kit includes: 860 DSPi Meter, Protective Carrying Case, Shoulder Strap, US AC Power Cable and AC to DC Power Adapter & Battery Charger. Configured with: Power Pack (PP-1), QAM (QA-2), Frequency Domain Reflectometer (FDR-1) and Return Transmitter Board (RTB) Options
860 DSPi Field Analyzer

860 DSPi - US (PP-1, SR-1, QA-2, FDR-1 & RTB)

Configured with options

The 860 DSPi is a handheld spectrum analyzer with US DOCSIS 3.0 (8x4) modem that provides all of the testing power needed to ensure HFC networks operate to high standards. This includes balancing of the distribution system, maintaining analog and digital signal quality and controlling return path ingress. Standard Testing Features: 6 MHz Channel Spacing, Return Spectrum Analysis (4 to 65 MHz), Forward Spectrum Analysis (4 to 1000 MHz), Level Measurement, C/N Measurement, QAM Measurement (Level/MER/BER), Channel Plan Scan with Tilt Measurement, Ping, Trace Route, VoIP, Throughput, Cable Modem Statistics, Analog HUM, Depth of Modulation, CSO/CTB, FM Deviation, Sweepless Sweep, Line Viewer and QAM Source. Standard Communication Features: RF Test Port (F-Type, Replaceable), US DOCSIS 3.0 Modem 8x4 (100/304 MBPS), RJ45 Electrical Ethernet Port (10/100MBPS), CM to RJ-45 Mode. The complete kit includes: 860 DSPi Meter, Protective Carrying Case, Shoulder Strap, US AC Power Cable and AC to DC Power Adapter & Battery Charger. Configured with: Power Pack (PP-1), Return Sweep Receiver (SR-1), QAM (QA-2), Frequency Domain Reflectometer (FDR-1) and Return Transmitter Board (RTB) Options
860 DSPi Field Analyzer

860 DSPi - US (PP-1, VP-1, QA-2, FDR-1 & RTB)

Configured with options

The 860 DSPi is a handheld spectrum analyzer with US DOCSIS 3.0 (8x4) modem that provides all of the testing power needed to ensure HFC networks operate to high standards. This includes balancing of the distribution system, maintaining analog and digital signal quality and controlling return path ingress. Standard Testing Features: 6 MHz Channel Spacing, Return Spectrum Analysis (4 to 65 MHz), Forward Spectrum Analysis (4 to 1000 MHz), Level Measurement, C/N Measurement, QAM Measurement (Level/MER/BER), Channel Plan Scan with Tilt Measurement, Ping, Trace Route, VoIP, Throughput, Cable Modem Statistics, Analog HUM, Depth of Modulation, CSO/CTB, FM Deviation, Sweepless Sweep, Line Viewer and QAM Source. Standard Communication Features: RF Test Port (F-Type, Replaceable), US DOCSIS 3.0 Modem 8x4 (100/304 MBPS), RJ45 Electrical Ethernet Port (10/100MBPS), CM to RJ-45 Mode. The complete kit includes: 860 DSPi Meter, Protective Carrying Case, Shoulder Strap, US AC Power Cable and AC to DC Power Adapter & Battery Charger. Configured with: Power Pack (PP-1), Return Tester RSVP (VP-1), QAM (QA-2), Frequency Domain Reflectometer (FDR-1) and Return Transmitter Board (RTB) Options
860 DSPi Field Analyzer

860 DSPi - US (PP-1, SR-1, VP-1, QA-2, FDR-1 & RTB)

Configured with options

The 860 DSPi is a handheld spectrum analyzer with US DOCSIS 3.0 (8x4) modem that provides all of the testing power needed to ensure HFC networks operate to high standards. This includes balancing of the distribution system, maintaining analog and digital signal quality and controlling return path ingress. Standard Testing Features: 6 MHz Channel Spacing, Return Spectrum Analysis (4 to 65 MHz), Forward Spectrum Analysis (4 to 1000 MHz), Level Measurement, C/N Measurement, QAM Measurement (Level/MER/BER), Channel Plan Scan with Tilt Measurement, Ping, Trace Route, VoIP, Throughput, Cable Modem Statistics, Analog HUM, Depth of Modulation, CSO/CTB, FM Deviation, Sweepless Sweep, Line Viewer and QAM Source. Standard Communication Features: RF Test Port (F-Type, Replaceable), US DOCSIS 3.0 Modem 8x4 (100/304 MBPS), RJ45 Electrical Ethernet Port (10/100MBPS), CM to RJ-45 Mode. The complete kit includes: 860 DSPi Meter, Protective Carrying Case, Shoulder Strap, US AC Power Cable and AC to DC Power Adapter & Battery Charger. Configured with: Power Pack (PP-1), Return Sweep Receiver (SR-1), Return Tester RSVP (VP-1), QAM (QA-2), Frequency Domain Reflectometer (FDR-1) and Return Transmitter Board (RTB) Options
860 DSPi Field Analyzer

860 DSPi - US (PP-1, SA-1, QA-2, FDR-1 & RTB)

Configured with options

The 860 DSPi is a handheld spectrum analyzer with US DOCSIS 3.0 (8x4) modem that provides all of the testing power needed to ensure HFC networks operate to high standards. This includes balancing of the distribution system, maintaining analog and digital signal quality and controlling return path ingress. Standard Testing Features: 6 MHz Channel Spacing, Return Spectrum Analysis (4 to 65 MHz), Forward Spectrum Analysis (4 to 1000 MHz), Level Measurement, C/N Measurement, QAM Measurement (Level/MER/BER), Channel Plan Scan with Tilt Measurement, Ping, Trace Route, VoIP, Throughput, Cable Modem Statistics, Analog HUM, Depth of Modulation, CSO/CTB, FM Deviation, Sweepless Sweep, Line Viewer and QAM Source. Standard Communication Features: RF Test Port (F-Type, Replaceable), US DOCSIS 3.0 Modem 8x4 (100/304 MBPS), RJ45 Electrical Ethernet Port (10/100MBPS), CM to RJ-45 Mode. The complete kit includes: 860 DSPi Meter, Protective Carrying Case, Shoulder Strap, US AC Power Cable and AC to DC Power Adapter & Battery Charger. Configured with: Power Pack (PP-1), Spectrum Analyzer (SA-1), QAM (QA-2), Frequency Domain Reflectometer (FDR-1) and Return Transmitter Board (RTB) Options
860 DSPi Field Analyzer

860 DSPi - US (PP-1, SR-1, SA-1, QA-2, FDR-1 & RTB)

Configured with options

The 860 DSPi is a handheld spectrum analyzer with US DOCSIS 3.0 (8x4) modem that provides all of the testing power needed to ensure HFC networks operate to high standards. This includes balancing of the distribution system, maintaining analog and digital signal quality and controlling return path ingress. Standard Testing Features: 6 MHz Channel Spacing, Return Spectrum Analysis (4 to 65 MHz), Forward Spectrum Analysis (4 to 1000 MHz), Level Measurement, C/N Measurement, QAM Measurement (Level/MER/BER), Channel Plan Scan with Tilt Measurement, Ping, Trace Route, VoIP, Throughput, Cable Modem Statistics, Analog HUM, Depth of Modulation, CSO/CTB, FM Deviation, Sweepless Sweep, Line Viewer and QAM Source. Standard Communication Features: RF Test Port (F-Type, Replaceable), US DOCSIS 3.0 Modem 8x4 (100/304 MBPS), RJ45 Electrical Ethernet Port (10/100MBPS), CM to RJ-45 Mode. The complete kit includes: 860 DSPi Meter, Protective Carrying Case, Shoulder Strap, US AC Power Cable and AC to DC Power Adapter & Battery Charger. Configured with: Power Pack (PP-1), Return Sweep Receiver (SR-1), Spectrum Analyzer (SA-1), QAM (QA-2), Frequency Domain Reflectometer (FDR-1) and Return Transmitter Board (RTB) Options
860 DSPi Field Analyzer

860 DSPi - US (PP-1, VP-1, SA-1, QA-2, FDR-1 & RTB)

Configured with options

The 860 DSPi is a handheld spectrum analyzer with US DOCSIS 3.0 (8x4) modem that provides all of the testing power needed to ensure HFC networks operate to high standards. This includes balancing of the distribution system, maintaining analog and digital signal quality and controlling return path ingress. Standard Testing Features: 6 MHz Channel Spacing, Return Spectrum Analysis (4 to 65 MHz), Forward Spectrum Analysis (4 to 1000 MHz), Level Measurement, C/N Measurement, QAM Measurement (Level/MER/BER), Channel Plan Scan with Tilt Measurement, Ping, Trace Route, VoIP, Throughput, Cable Modem Statistics, Analog HUM, Depth of Modulation, CSO/CTB, FM Deviation, Sweepless Sweep, Line Viewer and QAM Source. Standard Communication Features: RF Test Port (F-Type, Replaceable), US DOCSIS 3.0 Modem 8x4 (100/304 MBPS), RJ45 Electrical Ethernet Port (10/100MBPS), CM to RJ-45 Mode. The complete kit includes: 860 DSPi Meter, Protective Carrying Case, Shoulder Strap, US AC Power Cable and AC to DC Power Adapter & Battery Charger. Configured with: Power Pack (PP-1), Return Tester RSVP (VP-1), Spectrum Analyzer (SA-1), QAM (QA-2), Frequency Domain Reflectometer (FDR-1) and Return Transmitter Board (RTB) Options
860 DSPi Field Analyzer

860 DSPi - US (PP-1, SR-1, VP-1, SA-1, QA-2, FDR-1 & RTB)

Configured with options

The 860 DSPi is a handheld spectrum analyzer with US DOCSIS 3.0 (8x4) modem that provides all of the testing power needed to ensure HFC networks operate to high standards. This includes balancing of the distribution system, maintaining analog and digital signal quality and controlling return path ingress. Standard Testing Features: 6 MHz Channel Spacing, Return Spectrum Analysis (4 to 65 MHz), Forward Spectrum Analysis (4 to 1000 MHz), Level Measurement, C/N Measurement, QAM Measurement (Level/MER/BER), Channel Plan Scan with Tilt Measurement, Ping, Trace Route, VoIP, Throughput, Cable Modem Statistics, Analog HUM, Depth of Modulation, CSO/CTB, FM Deviation, Sweepless Sweep, Line Viewer and QAM Source. Standard Communication Features: RF Test Port (F-Type, Replaceable), US DOCSIS 3.0 Modem 8x4 (100/304 MBPS), RJ45 Electrical Ethernet Port (10/100MBPS), CM to RJ-45 Mode. The complete kit includes: 860 DSPi Meter, Protective Carrying Case, Shoulder Strap, US AC Power Cable and AC to DC Power Adapter & Battery Charger. Configured with: Power Pack (PP-1), Return Sweep Receiver (SR-1), Return Tester RSVP (VP-1), Spectrum Analyzer (SA-1), QAM (QA-2), Frequency Domain Reflectometer (FDR-1) and Return Transmitter Board (RTB) Options
860 DSPi Field Analyzer

860 DSPi - US (PP-1, VSB, FDR-1 & RTB)

Configured with options

The 860 DSPi is a handheld spectrum analyzer with US DOCSIS 3.0 (8x4) modem that provides all of the testing power needed to ensure HFC networks operate to high standards. This includes balancing of the distribution system, maintaining analog and digital signal quality and controlling return path ingress. Standard Testing Features: 6 MHz Channel Spacing, Return Spectrum Analysis (4 to 65 MHz), Forward Spectrum Analysis (4 to 1000 MHz), Level Measurement, C/N Measurement, QAM Measurement (Level/MER/BER), Channel Plan Scan with Tilt Measurement, Ping, Trace Route, VoIP, Throughput, Cable Modem Statistics, Analog HUM, Depth of Modulation, CSO/CTB, FM Deviation, Sweepless Sweep, Line Viewer and QAM Source. Standard Communication Features: RF Test Port (F-Type, Replaceable), US DOCSIS 3.0 Modem 8x4 (100/304 MBPS), RJ45 Electrical Ethernet Port (10/100MBPS), CM to RJ-45 Mode. The complete kit includes: 860 DSPi Meter, Protective Carrying Case, Shoulder Strap, US AC Power Cable and AC to DC Power Adapter & Battery Charger. Configured with: Power Pack (PP-1), Vestigial Side Band Modulation (VSB), Frequency Domain Reflectometer (FDR-1) and Return Transmitter Board (RTB) Options
860 DSPi Field Analyzer

860 DSPi - US (PP-1, SR-1, VSB, FDR-1 & RTB)

Configured with options

The 860 DSPi is a handheld spectrum analyzer with US DOCSIS 3.0 (8x4) modem that provides all of the testing power needed to ensure HFC networks operate to high standards. This includes balancing of the distribution system, maintaining analog and digital signal quality and controlling return path ingress. Standard Testing Features: 6 MHz Channel Spacing, Return Spectrum Analysis (4 to 65 MHz), Forward Spectrum Analysis (4 to 1000 MHz), Level Measurement, C/N Measurement, QAM Measurement (Level/MER/BER), Channel Plan Scan with Tilt Measurement, Ping, Trace Route, VoIP, Throughput, Cable Modem Statistics, Analog HUM, Depth of Modulation, CSO/CTB, FM Deviation, Sweepless Sweep, Line Viewer and QAM Source. Standard Communication Features: RF Test Port (F-Type, Replaceable), US DOCSIS 3.0 Modem 8x4 (100/304 MBPS), RJ45 Electrical Ethernet Port (10/100MBPS), CM to RJ-45 Mode. The complete kit includes: 860 DSPi Meter, Protective Carrying Case, Shoulder Strap, US AC Power Cable and AC to DC Power Adapter & Battery Charger. Configured with: Power Pack (PP-1), Return Sweep Receiver (SR-1), Vestigial Side Band Modulation (VSB), Frequency Domain Reflectometer (FDR-1) and Return Transmitter Board (RTB) Options
860 DSPi Field Analyzer

860 DSPi - US (PP-1, VP-1, VSB, FDR-1 & RTB)

Configured with options

The 860 DSPi is a handheld spectrum analyzer with US DOCSIS 3.0 (8x4) modem that provides all of the testing power needed to ensure HFC networks operate to high standards. This includes balancing of the distribution system, maintaining analog and digital signal quality and controlling return path ingress. Standard Testing Features: 6 MHz Channel Spacing, Return Spectrum Analysis (4 to 65 MHz), Forward Spectrum Analysis (4 to 1000 MHz), Level Measurement, C/N Measurement, QAM Measurement (Level/MER/BER), Channel Plan Scan with Tilt Measurement, Ping, Trace Route, VoIP, Throughput, Cable Modem Statistics, Analog HUM, Depth of Modulation, CSO/CTB, FM Deviation, Sweepless Sweep, Line Viewer and QAM Source. Standard Communication Features: RF Test Port (F-Type, Replaceable), US DOCSIS 3.0 Modem 8x4 (100/304 MBPS), RJ45 Electrical Ethernet Port (10/100MBPS), CM to RJ-45 Mode. The complete kit includes: 860 DSPi Meter, Protective Carrying Case, Shoulder Strap, US AC Power Cable and AC to DC Power Adapter & Battery Charger. Configured with: Power Pack (PP-1), Return Tester RSVP (VP-1), Vestigial Side Band Modulation (VSB), Frequency Domain Reflectometer (FDR-1) and Return Transmitter Board (RTB) Options
860 DSPi Field Analyzer

860 DSPi - US (PP-1, SR-1, VP-1, VSB, FDR-1 & RTB)

Configured with options

The 860 DSPi is a handheld spectrum analyzer with US DOCSIS 3.0 (8x4) modem that provides all of the testing power needed to ensure HFC networks operate to high standards. This includes balancing of the distribution system, maintaining analog and digital signal quality and controlling return path ingress. Standard Testing Features: 6 MHz Channel Spacing, Return Spectrum Analysis (4 to 65 MHz), Forward Spectrum Analysis (4 to 1000 MHz), Level Measurement, C/N Measurement, QAM Measurement (Level/MER/BER), Channel Plan Scan with Tilt Measurement, Ping, Trace Route, VoIP, Throughput, Cable Modem Statistics, Analog HUM, Depth of Modulation, CSO/CTB, FM Deviation, Sweepless Sweep, Line Viewer and QAM Source. Standard Communication Features: RF Test Port (F-Type, Replaceable), US DOCSIS 3.0 Modem 8x4 (100/304 MBPS), RJ45 Electrical Ethernet Port (10/100MBPS), CM to RJ-45 Mode. The complete kit includes: 860 DSPi Meter, Protective Carrying Case, Shoulder Strap, US AC Power Cable and AC to DC Power Adapter & Battery Charger. Configured with: Power Pack (PP-1), Return Sweep Receiver (SR-1), Return Tester RSVP (VP-1), Vestigial Side Band Modulation (VSB), Frequency Domain Reflectometer (FDR-1) and Return Transmitter Board (RTB) Options
860 DSPi Field Analyzer

860 DSPi - US (PP-1, SA-1, VSB, FDR-1 & RTB)

Configured with options

The 860 DSPi is a handheld spectrum analyzer with US DOCSIS 3.0 (8x4) modem that provides all of the testing power needed to ensure HFC networks operate to high standards. This includes balancing of the distribution system, maintaining analog and digital signal quality and controlling return path ingress. Standard Testing Features: 6 MHz Channel Spacing, Return Spectrum Analysis (4 to 65 MHz), Forward Spectrum Analysis (4 to 1000 MHz), Level Measurement, C/N Measurement, QAM Measurement (Level/MER/BER), Channel Plan Scan with Tilt Measurement, Ping, Trace Route, VoIP, Throughput, Cable Modem Statistics, Analog HUM, Depth of Modulation, CSO/CTB, FM Deviation, Sweepless Sweep, Line Viewer and QAM Source. Standard Communication Features: RF Test Port (F-Type, Replaceable), US DOCSIS 3.0 Modem 8x4 (100/304 MBPS), RJ45 Electrical Ethernet Port (10/100MBPS), CM to RJ-45 Mode. The complete kit includes: 860 DSPi Meter, Protective Carrying Case, Shoulder Strap, US AC Power Cable and AC to DC Power Adapter & Battery Charger. Configured with: Power Pack (PP-1), Spectrum Analyzer (SA-1), Vestigial Side Band Modulation (VSB), Frequency Domain Reflectometer (FDR-1) and Return Transmitter Board (RTB) Options
860 DSPi Field Analyzer

860 DSPi - US (PP-1, SR-1, SA-1, VSB, FDR-1 & RTB)

Configured with options

The 860 DSPi is a handheld spectrum analyzer with US DOCSIS 3.0 (8x4) modem that provides all of the testing power needed to ensure HFC networks operate to high standards. This includes balancing of the distribution system, maintaining analog and digital signal quality and controlling return path ingress. Standard Testing Features: 6 MHz Channel Spacing, Return Spectrum Analysis (4 to 65 MHz), Forward Spectrum Analysis (4 to 1000 MHz), Level Measurement, C/N Measurement, QAM Measurement (Level/MER/BER), Channel Plan Scan with Tilt Measurement, Ping, Trace Route, VoIP, Throughput, Cable Modem Statistics, Analog HUM, Depth of Modulation, CSO/CTB, FM Deviation, Sweepless Sweep, Line Viewer and QAM Source. Standard Communication Features: RF Test Port (F-Type, Replaceable), US DOCSIS 3.0 Modem 8x4 (100/304 MBPS), RJ45 Electrical Ethernet Port (10/100MBPS), CM to RJ-45 Mode. The complete kit includes: 860 DSPi Meter, Protective Carrying Case, Shoulder Strap, US AC Power Cable and AC to DC Power Adapter & Battery Charger. Configured with: Power Pack (PP-1), Return Sweep Receiver (SR-1), Spectrum Analyzer (SA-1), Vestigial Side Band Modulation (VSB), Frequency Domain Reflectometer (FDR-1) and Return Transmitter Board (RTB) Options
860 DSPi Field Analyzer

860 DSPi - US (PP-1, VP-1, SA-1, VSB, FDR-1 & RTB)

Configured with options

The 860 DSPi is a handheld spectrum analyzer with US DOCSIS 3.0 (8x4) modem that provides all of the testing power needed to ensure HFC networks operate to high standards. This includes balancing of the distribution system, maintaining analog and digital signal quality and controlling return path ingress. Standard Testing Features: 6 MHz Channel Spacing, Return Spectrum Analysis (4 to 65 MHz), Forward Spectrum Analysis (4 to 1000 MHz), Level Measurement, C/N Measurement, QAM Measurement (Level/MER/BER), Channel Plan Scan with Tilt Measurement, Ping, Trace Route, VoIP, Throughput, Cable Modem Statistics, Analog HUM, Depth of Modulation, CSO/CTB, FM Deviation, Sweepless Sweep, Line Viewer and QAM Source. Standard Communication Features: RF Test Port (F-Type, Replaceable), US DOCSIS 3.0 Modem 8x4 (100/304 MBPS), RJ45 Electrical Ethernet Port (10/100MBPS), CM to RJ-45 Mode. The complete kit includes: 860 DSPi Meter, Protective Carrying Case, Shoulder Strap, US AC Power Cable and AC to DC Power Adapter & Battery Charger. Configured with: Power Pack (PP-1), Return Tester RSVP (VP-1), Spectrum Analyzer (SA-1), Vestigial Side Band Modulation (VSB), Frequency Domain Reflectometer (FDR-1) and Return Transmitter Board (RTB) Options
860 DSPi Field Analyzer

860 DSPi - US (PP-1, SR-1, VP-1, SA-1, VSB, FDR-1 & RTB)

Configured with options

The 860 DSPi is a handheld spectrum analyzer with US DOCSIS 3.0 (8x4) modem that provides all of the testing power needed to ensure HFC networks operate to high standards. This includes balancing of the distribution system, maintaining analog and digital signal quality and controlling return path ingress. Standard Testing Features: 6 MHz Channel Spacing, Return Spectrum Analysis (4 to 65 MHz), Forward Spectrum Analysis (4 to 1000 MHz), Level Measurement, C/N Measurement, QAM Measurement (Level/MER/BER), Channel Plan Scan with Tilt Measurement, Ping, Trace Route, VoIP, Throughput, Cable Modem Statistics, Analog HUM, Depth of Modulation, CSO/CTB, FM Deviation, Sweepless Sweep, Line Viewer and QAM Source. Standard Communication Features: RF Test Port (F-Type, Replaceable), US DOCSIS 3.0 Modem 8x4 (100/304 MBPS), RJ45 Electrical Ethernet Port (10/100MBPS), CM to RJ-45 Mode. The complete kit includes: 860 DSPi Meter, Protective Carrying Case, Shoulder Strap, US AC Power Cable and AC to DC Power Adapter & Battery Charger. Configured with: Power Pack (PP-1), Return Sweep Receiver (SR-1), Return Tester RSVP (VP-1), Spectrum Analyzer (SA-1), Vestigial Side Band Modulation (VSB), Frequency Domain Reflectometer (FDR-1) and Return Transmitter Board (RTB) Options
860 DSPi Field Analyzer

860 DSPi - US (PP-1, QA-2, VSB, FDR-1 & RTB)

Configured with options

The 860 DSPi is a handheld spectrum analyzer with US DOCSIS 3.0 (8x4) modem that provides all of the testing power needed to ensure HFC networks operate to high standards. This includes balancing of the distribution system, maintaining analog and digital signal quality and controlling return path ingress. Standard Testing Features: 6 MHz Channel Spacing, Return Spectrum Analysis (4 to 65 MHz), Forward Spectrum Analysis (4 to 1000 MHz), Level Measurement, C/N Measurement, QAM Measurement (Level/MER/BER), Channel Plan Scan with Tilt Measurement, Ping, Trace Route, VoIP, Throughput, Cable Modem Statistics, Analog HUM, Depth of Modulation, CSO/CTB, FM Deviation, Sweepless Sweep, Line Viewer and QAM Source. Standard Communication Features: RF Test Port (F-Type, Replaceable), US DOCSIS 3.0 Modem 8x4 (100/304 MBPS), RJ45 Electrical Ethernet Port (10/100MBPS), CM to RJ-45 Mode. The complete kit includes: 860 DSPi Meter, Protective Carrying Case, Shoulder Strap, US AC Power Cable and AC to DC Power Adapter & Battery Charger. Configured with: Power Pack (PP-1), QAM (QA-2), Vestigial Side Band Modulation (VSB), Frequency Domain Reflectometer (FDR-1) and Return Transmitter Board (RTB) Options
860 DSPi Field Analyzer

860 DSPi - US (PP-1, SR-1, QA-2, VSB, FDR-1 & RTB)

Configured with options

The 860 DSPi is a handheld spectrum analyzer with US DOCSIS 3.0 (8x4) modem that provides all of the testing power needed to ensure HFC networks operate to high standards. This includes balancing of the distribution system, maintaining analog and digital signal quality and controlling return path ingress. Standard Testing Features: 6 MHz Channel Spacing, Return Spectrum Analysis (4 to 65 MHz), Forward Spectrum Analysis (4 to 1000 MHz), Level Measurement, C/N Measurement, QAM Measurement (Level/MER/BER), Channel Plan Scan with Tilt Measurement, Ping, Trace Route, VoIP, Throughput, Cable Modem Statistics, Analog HUM, Depth of Modulation, CSO/CTB, FM Deviation, Sweepless Sweep, Line Viewer and QAM Source. Standard Communication Features: RF Test Port (F-Type, Replaceable), US DOCSIS 3.0 Modem 8x4 (100/304 MBPS), RJ45 Electrical Ethernet Port (10/100MBPS), CM to RJ-45 Mode. The complete kit includes: 860 DSPi Meter, Protective Carrying Case, Shoulder Strap, US AC Power Cable and AC to DC Power Adapter & Battery Charger. Configured with: Power Pack (PP-1), Return Sweep Receiver (SR-1), QAM (QA-2), Vestigial Side Band Modulation (VSB), Frequency Domain Reflectometer (FDR-1) and Return Transmitter Board (RTB) Options
860 DSPi Field Analyzer

860 DSPi - US (PP-1, VP-1, QA-2, VSB, FDR-1 & RTB)

Configured with options

The 860 DSPi is a handheld spectrum analyzer with US DOCSIS 3.0 (8x4) modem that provides all of the testing power needed to ensure HFC networks operate to high standards. This includes balancing of the distribution system, maintaining analog and digital signal quality and controlling return path ingress. Standard Testing Features: 6 MHz Channel Spacing, Return Spectrum Analysis (4 to 65 MHz), Forward Spectrum Analysis (4 to 1000 MHz), Level Measurement, C/N Measurement, QAM Measurement (Level/MER/BER), Channel Plan Scan with Tilt Measurement, Ping, Trace Route, VoIP, Throughput, Cable Modem Statistics, Analog HUM, Depth of Modulation, CSO/CTB, FM Deviation, Sweepless Sweep, Line Viewer and QAM Source. Standard Communication Features: RF Test Port (F-Type, Replaceable), US DOCSIS 3.0 Modem 8x4 (100/304 MBPS), RJ45 Electrical Ethernet Port (10/100MBPS), CM to RJ-45 Mode. The complete kit includes: 860 DSPi Meter, Protective Carrying Case, Shoulder Strap, US AC Power Cable and AC to DC Power Adapter & Battery Charger. Configured with: Power Pack (PP-1), Return Tester RSVP (VP-1), QAM (QA-2), Vestigial Side Band Modulation (VSB), Frequency Domain Reflectometer (FDR-1) and Return Transmitter Board (RTB) Options
860 DSPi Field Analyzer

860 DSPi - US (PP-1, SR-1, VP-1, QA-2, VSB, FDR-1 & RTB)

Configured with options

The 860 DSPi is a handheld spectrum analyzer with US DOCSIS 3.0 (8x4) modem that provides all of the testing power needed to ensure HFC networks operate to high standards. This includes balancing of the distribution system, maintaining analog and digital signal quality and controlling return path ingress. Standard Testing Features: 6 MHz Channel Spacing, Return Spectrum Analysis (4 to 65 MHz), Forward Spectrum Analysis (4 to 1000 MHz), Level Measurement, C/N Measurement, QAM Measurement (Level/MER/BER), Channel Plan Scan with Tilt Measurement, Ping, Trace Route, VoIP, Throughput, Cable Modem Statistics, Analog HUM, Depth of Modulation, CSO/CTB, FM Deviation, Sweepless Sweep, Line Viewer and QAM Source. Standard Communication Features: RF Test Port (F-Type, Replaceable), US DOCSIS 3.0 Modem 8x4 (100/304 MBPS), RJ45 Electrical Ethernet Port (10/100MBPS), CM to RJ-45 Mode. The complete kit includes: 860 DSPi Meter, Protective Carrying Case, Shoulder Strap, US AC Power Cable and AC to DC Power Adapter & Battery Charger. Configured with: Power Pack (PP-1), Return Sweep Receiver (SR-1), Return Tester RSVP (VP-1), QAM (QA-2), Vestigial Side Band Modulation (VSB), Frequency Domain Reflectometer (FDR-1) and Return Transmitter Board (RTB) Options
860 DSPi Field Analyzer

860 DSPi - US (PP-1, SA-1, QA-2, VSB, FDR-1 & RTB)

Configured with options

The 860 DSPi is a handheld spectrum analyzer with US DOCSIS 3.0 (8x4) modem that provides all of the testing power needed to ensure HFC networks operate to high standards. This includes balancing of the distribution system, maintaining analog and digital signal quality and controlling return path ingress. Standard Testing Features: 6 MHz Channel Spacing, Return Spectrum Analysis (4 to 65 MHz), Forward Spectrum Analysis (4 to 1000 MHz), Level Measurement, C/N Measurement, QAM Measurement (Level/MER/BER), Channel Plan Scan with Tilt Measurement, Ping, Trace Route, VoIP, Throughput, Cable Modem Statistics, Analog HUM, Depth of Modulation, CSO/CTB, FM Deviation, Sweepless Sweep, Line Viewer and QAM Source. Standard Communication Features: RF Test Port (F-Type, Replaceable), US DOCSIS 3.0 Modem 8x4 (100/304 MBPS), RJ45 Electrical Ethernet Port (10/100MBPS), CM to RJ-45 Mode. The complete kit includes: 860 DSPi Meter, Protective Carrying Case, Shoulder Strap, US AC Power Cable and AC to DC Power Adapter & Battery Charger. Configured with: Power Pack (PP-1), Spectrum Analyzer (SA-1), QAM (QA-2), Vestigial Side Band Modulation (VSB), Frequency Domain Reflectometer (FDR-1) and Return Transmitter Board (RTB) Options
860 DSPi Field Analyzer

860 DSPi - US (PP-1, SR-1, SA-1, QA-2, VSB, FDR-1 & RTB)

Configured with options

The 860 DSPi is a handheld spectrum analyzer with US DOCSIS 3.0 (8x4) modem that provides all of the testing power needed to ensure HFC networks operate to high standards. This includes balancing of the distribution system, maintaining analog and digital signal quality and controlling return path ingress. Standard Testing Features: 6 MHz Channel Spacing, Return Spectrum Analysis (4 to 65 MHz), Forward Spectrum Analysis (4 to 1000 MHz), Level Measurement, C/N Measurement, QAM Measurement (Level/MER/BER), Channel Plan Scan with Tilt Measurement, Ping, Trace Route, VoIP, Throughput, Cable Modem Statistics, Analog HUM, Depth of Modulation, CSO/CTB, FM Deviation, Sweepless Sweep, Line Viewer and QAM Source. Standard Communication Features: RF Test Port (F-Type, Replaceable), US DOCSIS 3.0 Modem 8x4 (100/304 MBPS), RJ45 Electrical Ethernet Port (10/100MBPS), CM to RJ-45 Mode. The complete kit includes: 860 DSPi Meter, Protective Carrying Case, Shoulder Strap, US AC Power Cable and AC to DC Power Adapter & Battery Charger. Configured with: Power Pack (PP-1), Return Sweep Receiver (SR-1), Spectrum Analyzer (SA-1), QAM (QA-2), Vestigial Side Band Modulation (VSB), Frequency Domain Reflectometer (FDR-1) and Return Transmitter Board (RTB) Options
860 DSPi Field Analyzer

860 DSPi - US (PP-1, VP-1, SA-1, QA-2, VSB, FDR-1 & RTB)

Configured with options

The 860 DSPi is a handheld spectrum analyzer with US DOCSIS 3.0 (8x4) modem that provides all of the testing power needed to ensure HFC networks operate to high standards. This includes balancing of the distribution system, maintaining analog and digital signal quality and controlling return path ingress. Standard Testing Features: 6 MHz Channel Spacing, Return Spectrum Analysis (4 to 65 MHz), Forward Spectrum Analysis (4 to 1000 MHz), Level Measurement, C/N Measurement, QAM Measurement (Level/MER/BER), Channel Plan Scan with Tilt Measurement, Ping, Trace Route, VoIP, Throughput, Cable Modem Statistics, Analog HUM, Depth of Modulation, CSO/CTB, FM Deviation, Sweepless Sweep, Line Viewer and QAM Source. Standard Communication Features: RF Test Port (F-Type, Replaceable), US DOCSIS 3.0 Modem 8x4 (100/304 MBPS), RJ45 Electrical Ethernet Port (10/100MBPS), CM to RJ-45 Mode. The complete kit includes: 860 DSPi Meter, Protective Carrying Case, Shoulder Strap, US AC Power Cable and AC to DC Power Adapter & Battery Charger. Configured with: Power Pack (PP-1), Return Tester RSVP (VP-1), Spectrum Analyzer (SA-1), QAM (QA-2), Vestigial Side Band Modulation (VSB), Frequency Domain Reflectometer (FDR-1) and Return Transmitter Board (RTB) Options
860 DSPi Field Analyzer

860 DSPi - US (PP-1, SR-1, VP-1, SA-1, QA-2, VSB, FDR-1 & RTB)

Configured with options

The 860 DSPi is a handheld spectrum analyzer with US DOCSIS 3.0 (8x4) modem that provides all of the testing power needed to ensure HFC networks operate to high standards. This includes balancing of the distribution system, maintaining analog and digital signal quality and controlling return path ingress. Standard Testing Features: 6 MHz Channel Spacing, Return Spectrum Analysis (4 to 65 MHz), Forward Spectrum Analysis (4 to 1000 MHz), Level Measurement, C/N Measurement, QAM Measurement (Level/MER/BER), Channel Plan Scan with Tilt Measurement, Ping, Trace Route, VoIP, Throughput, Cable Modem Statistics, Analog HUM, Depth of Modulation, CSO/CTB, FM Deviation, Sweepless Sweep, Line Viewer and QAM Source. Standard Communication Features: RF Test Port (F-Type, Replaceable), US DOCSIS 3.0 Modem 8x4 (100/304 MBPS), RJ45 Electrical Ethernet Port (10/100MBPS), CM to RJ-45 Mode. The complete kit includes: 860 DSPi Meter, Protective Carrying Case, Shoulder Strap, US AC Power Cable and AC to DC Power Adapter & Battery Charger. Configured with: Power Pack (PP-1), Return Sweep Receiver (SR-1), Return Tester RSVP (VP-1), Spectrum Analyzer (SA-1), QAM (QA-2), Vestigial Side Band Modulation (VSB), Frequency Domain Reflectometer (FDR-1) and Return Transmitter Board (RTB) Options
860 DSPi Field Analyzer

860 DSPi - US (PP-1, FS-1, FDR-1 & RTB)

Configured with options

The 860 DSPi is a handheld spectrum analyzer with US DOCSIS 3.0 (8x4) modem that provides all of the testing power needed to ensure HFC networks operate to high standards. This includes balancing of the distribution system, maintaining analog and digital signal quality and controlling return path ingress. Standard Testing Features: 6 MHz Channel Spacing, Return Spectrum Analysis (4 to 65 MHz), Forward Spectrum Analysis (4 to 1000 MHz), Level Measurement, C/N Measurement, QAM Measurement (Level/MER/BER), Channel Plan Scan with Tilt Measurement, Ping, Trace Route, VoIP, Throughput, Cable Modem Statistics, Analog HUM, Depth of Modulation, CSO/CTB, FM Deviation, Sweepless Sweep, Line Viewer and QAM Source. Standard Communication Features: RF Test Port (F-Type, Replaceable), US DOCSIS 3.0 Modem 8x4 (100/304 MBPS), RJ45 Electrical Ethernet Port (10/100MBPS), CM to RJ-45 Mode. The complete kit includes: 860 DSPi Meter, Protective Carrying Case, Shoulder Strap, US AC Power Cable and AC to DC Power Adapter & Battery Charger. Configured with: Power Pack (PP-1), Forward Sweep (FS-1), Frequency Domain Reflectometer (FDR-1) and Return Transmitter Board (RTB) Options
860 DSPi Field Analyzer

860 DSPi - US (PP-1, SR-1, FS-1, FDR-1 & RTB)

Configured with options

The 860 DSPi is a handheld spectrum analyzer with US DOCSIS 3.0 (8x4) modem that provides all of the testing power needed to ensure HFC networks operate to high standards. This includes balancing of the distribution system, maintaining analog and digital signal quality and controlling return path ingress. Standard Testing Features: 6 MHz Channel Spacing, Return Spectrum Analysis (4 to 65 MHz), Forward Spectrum Analysis (4 to 1000 MHz), Level Measurement, C/N Measurement, QAM Measurement (Level/MER/BER), Channel Plan Scan with Tilt Measurement, Ping, Trace Route, VoIP, Throughput, Cable Modem Statistics, Analog HUM, Depth of Modulation, CSO/CTB, FM Deviation, Sweepless Sweep, Line Viewer and QAM Source. Standard Communication Features: RF Test Port (F-Type, Replaceable), US DOCSIS 3.0 Modem 8x4 (100/304 MBPS), RJ45 Electrical Ethernet Port (10/100MBPS), CM to RJ-45 Mode. The complete kit includes: 860 DSPi Meter, Protective Carrying Case, Shoulder Strap, US AC Power Cable and AC to DC Power Adapter & Battery Charger. Configured with: Power Pack (PP-1), Return Sweep Receiver (SR-1), Forward Sweep (FS-1), Frequency Domain Reflectometer (FDR-1) and Return Transmitter Board (RTB) Options
860 DSPi Field Analyzer

860 DSPi - US (PP-1, VP-1, FS-1, FDR-1 & RTB)

Configured with options

The 860 DSPi is a handheld spectrum analyzer with US DOCSIS 3.0 (8x4) modem that provides all of the testing power needed to ensure HFC networks operate to high standards. This includes balancing of the distribution system, maintaining analog and digital signal quality and controlling return path ingress. Standard Testing Features: 6 MHz Channel Spacing, Return Spectrum Analysis (4 to 65 MHz), Forward Spectrum Analysis (4 to 1000 MHz), Level Measurement, C/N Measurement, QAM Measurement (Level/MER/BER), Channel Plan Scan with Tilt Measurement, Ping, Trace Route, VoIP, Throughput, Cable Modem Statistics, Analog HUM, Depth of Modulation, CSO/CTB, FM Deviation, Sweepless Sweep, Line Viewer and QAM Source. Standard Communication Features: RF Test Port (F-Type, Replaceable), US DOCSIS 3.0 Modem 8x4 (100/304 MBPS), RJ45 Electrical Ethernet Port (10/100MBPS), CM to RJ-45 Mode. The complete kit includes: 860 DSPi Meter, Protective Carrying Case, Shoulder Strap, US AC Power Cable and AC to DC Power Adapter & Battery Charger. Configured with: Power Pack (PP-1), Return Tester RSVP (VP-1), Forward Sweep (FS-1), Frequency Domain Reflectometer (FDR-1) and Return Transmitter Board (RTB) Options
860 DSPi Field Analyzer

860 DSPi - US (PP-1, SR-1, VP-1, FS-1, FDR-1 & RTB)

Configured with options

The 860 DSPi is a handheld spectrum analyzer with US DOCSIS 3.0 (8x4) modem that provides all of the testing power needed to ensure HFC networks operate to high standards. This includes balancing of the distribution system, maintaining analog and digital signal quality and controlling return path ingress. Standard Testing Features: 6 MHz Channel Spacing, Return Spectrum Analysis (4 to 65 MHz), Forward Spectrum Analysis (4 to 1000 MHz), Level Measurement, C/N Measurement, QAM Measurement (Level/MER/BER), Channel Plan Scan with Tilt Measurement, Ping, Trace Route, VoIP, Throughput, Cable Modem Statistics, Analog HUM, Depth of Modulation, CSO/CTB, FM Deviation, Sweepless Sweep, Line Viewer and QAM Source. Standard Communication Features: RF Test Port (F-Type, Replaceable), US DOCSIS 3.0 Modem 8x4 (100/304 MBPS), RJ45 Electrical Ethernet Port (10/100MBPS), CM to RJ-45 Mode. The complete kit includes: 860 DSPi Meter, Protective Carrying Case, Shoulder Strap, US AC Power Cable and AC to DC Power Adapter & Battery Charger. Configured with: Power Pack (PP-1), Return Sweep Receiver (SR-1), Return Tester RSVP (VP-1), Forward Sweep (FS-1), Frequency Domain Reflectometer (FDR-1) and Return Transmitter Board (RTB) Options
860 DSPi Field Analyzer

860 DSPi - US (PP-1, SA-1, FS-1, FDR-1 & RTB)

Configured with options

The 860 DSPi is a handheld spectrum analyzer with US DOCSIS 3.0 (8x4) modem that provides all of the testing power needed to ensure HFC networks operate to high standards. This includes balancing of the distribution system, maintaining analog and digital signal quality and controlling return path ingress. Standard Testing Features: 6 MHz Channel Spacing, Return Spectrum Analysis (4 to 65 MHz), Forward Spectrum Analysis (4 to 1000 MHz), Level Measurement, C/N Measurement, QAM Measurement (Level/MER/BER), Channel Plan Scan with Tilt Measurement, Ping, Trace Route, VoIP, Throughput, Cable Modem Statistics, Analog HUM, Depth of Modulation, CSO/CTB, FM Deviation, Sweepless Sweep, Line Viewer and QAM Source. Standard Communication Features: RF Test Port (F-Type, Replaceable), US DOCSIS 3.0 Modem 8x4 (100/304 MBPS), RJ45 Electrical Ethernet Port (10/100MBPS), CM to RJ-45 Mode. The complete kit includes: 860 DSPi Meter, Protective Carrying Case, Shoulder Strap, US AC Power Cable and AC to DC Power Adapter & Battery Charger. Configured with: Power Pack (PP-1), Spectrum Analyzer (SA-1), Forward Sweep (FS-1), Frequency Domain Reflectometer (FDR-1) and Return Transmitter Board (RTB) Options
860 DSPi Field Analyzer

860 DSPi - US (PP-1, SR-1, SA-1, FS-1, FDR-1 & RTB)

Configured with options

The 860 DSPi is a handheld spectrum analyzer with US DOCSIS 3.0 (8x4) modem that provides all of the testing power needed to ensure HFC networks operate to high standards. This includes balancing of the distribution system, maintaining analog and digital signal quality and controlling return path ingress. Standard Testing Features: 6 MHz Channel Spacing, Return Spectrum Analysis (4 to 65 MHz), Forward Spectrum Analysis (4 to 1000 MHz), Level Measurement, C/N Measurement, QAM Measurement (Level/MER/BER), Channel Plan Scan with Tilt Measurement, Ping, Trace Route, VoIP, Throughput, Cable Modem Statistics, Analog HUM, Depth of Modulation, CSO/CTB, FM Deviation, Sweepless Sweep, Line Viewer and QAM Source. Standard Communication Features: RF Test Port (F-Type, Replaceable), US DOCSIS 3.0 Modem 8x4 (100/304 MBPS), RJ45 Electrical Ethernet Port (10/100MBPS), CM to RJ-45 Mode. The complete kit includes: 860 DSPi Meter, Protective Carrying Case, Shoulder Strap, US AC Power Cable and AC to DC Power Adapter & Battery Charger. Configured with: Power Pack (PP-1), Return Sweep Receiver (SR-1), Spectrum Analyzer (SA-1), Forward Sweep (FS-1), Frequency Domain Reflectometer (FDR-1) and Return Transmitter Board (RTB) Options
860 DSPi Field Analyzer

860 DSPi - US (PP-1, VP-1, SA-1, FS-1, FDR-1 & RTB)

Configured with options

The 860 DSPi is a handheld spectrum analyzer with US DOCSIS 3.0 (8x4) modem that provides all of the testing power needed to ensure HFC networks operate to high standards. This includes balancing of the distribution system, maintaining analog and digital signal quality and controlling return path ingress. Standard Testing Features: 6 MHz Channel Spacing, Return Spectrum Analysis (4 to 65 MHz), Forward Spectrum Analysis (4 to 1000 MHz), Level Measurement, C/N Measurement, QAM Measurement (Level/MER/BER), Channel Plan Scan with Tilt Measurement, Ping, Trace Route, VoIP, Throughput, Cable Modem Statistics, Analog HUM, Depth of Modulation, CSO/CTB, FM Deviation, Sweepless Sweep, Line Viewer and QAM Source. Standard Communication Features: RF Test Port (F-Type, Replaceable), US DOCSIS 3.0 Modem 8x4 (100/304 MBPS), RJ45 Electrical Ethernet Port (10/100MBPS), CM to RJ-45 Mode. The complete kit includes: 860 DSPi Meter, Protective Carrying Case, Shoulder Strap, US AC Power Cable and AC to DC Power Adapter & Battery Charger. Configured with: Power Pack (PP-1), Return Tester RSVP (VP-1), Spectrum Analyzer (SA-1), Forward Sweep (FS-1), Frequency Domain Reflectometer (FDR-1) and Return Transmitter Board (RTB) Options
860 DSPi Field Analyzer

860 DSPi - US (PP-1, SR-1, VP-1, SA-1, FS-1, FDR-1 & RTB)

Configured with options

The 860 DSPi is a handheld spectrum analyzer with US DOCSIS 3.0 (8x4) modem that provides all of the testing power needed to ensure HFC networks operate to high standards. This includes balancing of the distribution system, maintaining analog and digital signal quality and controlling return path ingress. Standard Testing Features: 6 MHz Channel Spacing, Return Spectrum Analysis (4 to 65 MHz), Forward Spectrum Analysis (4 to 1000 MHz), Level Measurement, C/N Measurement, QAM Measurement (Level/MER/BER), Channel Plan Scan with Tilt Measurement, Ping, Trace Route, VoIP, Throughput, Cable Modem Statistics, Analog HUM, Depth of Modulation, CSO/CTB, FM Deviation, Sweepless Sweep, Line Viewer and QAM Source. Standard Communication Features: RF Test Port (F-Type, Replaceable), US DOCSIS 3.0 Modem 8x4 (100/304 MBPS), RJ45 Electrical Ethernet Port (10/100MBPS), CM to RJ-45 Mode. The complete kit includes: 860 DSPi Meter, Protective Carrying Case, Shoulder Strap, US AC Power Cable and AC to DC Power Adapter & Battery Charger. Configured with: Power Pack (PP-1), Return Sweep Receiver (SR-1), Return Tester RSVP (VP-1), Spectrum Analyzer (SA-1), Forward Sweep (FS-1), Frequency Domain Reflectometer (FDR-1) and Return Transmitter Board (RTB) Options
860 DSPi Field Analyzer

860 DSPi - US (PP-1, QA-2, FS-1, FDR-1 & RTB)

Configured with options

The 860 DSPi is a handheld spectrum analyzer with US DOCSIS 3.0 (8x4) modem that provides all of the testing power needed to ensure HFC networks operate to high standards. This includes balancing of the distribution system, maintaining analog and digital signal quality and controlling return path ingress. Standard Testing Features: 6 MHz Channel Spacing, Return Spectrum Analysis (4 to 65 MHz), Forward Spectrum Analysis (4 to 1000 MHz), Level Measurement, C/N Measurement, QAM Measurement (Level/MER/BER), Channel Plan Scan with Tilt Measurement, Ping, Trace Route, VoIP, Throughput, Cable Modem Statistics, Analog HUM, Depth of Modulation, CSO/CTB, FM Deviation, Sweepless Sweep, Line Viewer and QAM Source. Standard Communication Features: RF Test Port (F-Type, Replaceable), US DOCSIS 3.0 Modem 8x4 (100/304 MBPS), RJ45 Electrical Ethernet Port (10/100MBPS), CM to RJ-45 Mode. The complete kit includes: 860 DSPi Meter, Protective Carrying Case, Shoulder Strap, US AC Power Cable and AC to DC Power Adapter & Battery Charger. Configured with: Power Pack (PP-1), QAM (QA-2), Forward Sweep (FS-1), Frequency Domain Reflectometer (FDR-1) and Return Transmitter Board (RTB) Options
860 DSPi Field Analyzer

860 DSPi - US (PP-1, SR-1, QA-2, FS-1, FDR-1 & RTB)

Configured with options

The 860 DSPi is a handheld spectrum analyzer with US DOCSIS 3.0 (8x4) modem that provides all of the testing power needed to ensure HFC networks operate to high standards. This includes balancing of the distribution system, maintaining analog and digital signal quality and controlling return path ingress. Standard Testing Features: 6 MHz Channel Spacing, Return Spectrum Analysis (4 to 65 MHz), Forward Spectrum Analysis (4 to 1000 MHz), Level Measurement, C/N Measurement, QAM Measurement (Level/MER/BER), Channel Plan Scan with Tilt Measurement, Ping, Trace Route, VoIP, Throughput, Cable Modem Statistics, Analog HUM, Depth of Modulation, CSO/CTB, FM Deviation, Sweepless Sweep, Line Viewer and QAM Source. Standard Communication Features: RF Test Port (F-Type, Replaceable), US DOCSIS 3.0 Modem 8x4 (100/304 MBPS), RJ45 Electrical Ethernet Port (10/100MBPS), CM to RJ-45 Mode. The complete kit includes: 860 DSPi Meter, Protective Carrying Case, Shoulder Strap, US AC Power Cable and AC to DC Power Adapter & Battery Charger. Configured with: Power Pack (PP-1), Return Sweep Receiver (SR-1), QAM (QA-2), Forward Sweep (FS-1), Frequency Domain Reflectometer (FDR-1) and Return Transmitter Board (RTB) Options
860 DSPi Field Analyzer

860 DSPi - US (PP-1, VP-1, QA-2, FS-1, FDR-1 & RTB)

Configured with options

The 860 DSPi is a handheld spectrum analyzer with US DOCSIS 3.0 (8x4) modem that provides all of the testing power needed to ensure HFC networks operate to high standards. This includes balancing of the distribution system, maintaining analog and digital signal quality and controlling return path ingress. Standard Testing Features: 6 MHz Channel Spacing, Return Spectrum Analysis (4 to 65 MHz), Forward Spectrum Analysis (4 to 1000 MHz), Level Measurement, C/N Measurement, QAM Measurement (Level/MER/BER), Channel Plan Scan with Tilt Measurement, Ping, Trace Route, VoIP, Throughput, Cable Modem Statistics, Analog HUM, Depth of Modulation, CSO/CTB, FM Deviation, Sweepless Sweep, Line Viewer and QAM Source. Standard Communication Features: RF Test Port (F-Type, Replaceable), US DOCSIS 3.0 Modem 8x4 (100/304 MBPS), RJ45 Electrical Ethernet Port (10/100MBPS), CM to RJ-45 Mode. The complete kit includes: 860 DSPi Meter, Protective Carrying Case, Shoulder Strap, US AC Power Cable and AC to DC Power Adapter & Battery Charger. Configured with: Power Pack (PP-1), Return Tester RSVP (VP-1), QAM (QA-2), Forward Sweep (FS-1), Frequency Domain Reflectometer (FDR-1) and Return Transmitter Board (RTB) Options
860 DSPi Field Analyzer

860 DSPi - US (PP-1, SR-1, VP-1, QA-2, FS-1, FDR-1 & RTB)

Configured with options

The 860 DSPi is a handheld spectrum analyzer with US DOCSIS 3.0 (8x4) modem that provides all of the testing power needed to ensure HFC networks operate to high standards. This includes balancing of the distribution system, maintaining analog and digital signal quality and controlling return path ingress. Standard Testing Features: 6 MHz Channel Spacing, Return Spectrum Analysis (4 to 65 MHz), Forward Spectrum Analysis (4 to 1000 MHz), Level Measurement, C/N Measurement, QAM Measurement (Level/MER/BER), Channel Plan Scan with Tilt Measurement, Ping, Trace Route, VoIP, Throughput, Cable Modem Statistics, Analog HUM, Depth of Modulation, CSO/CTB, FM Deviation, Sweepless Sweep, Line Viewer and QAM Source. Standard Communication Features: RF Test Port (F-Type, Replaceable), US DOCSIS 3.0 Modem 8x4 (100/304 MBPS), RJ45 Electrical Ethernet Port (10/100MBPS), CM to RJ-45 Mode. The complete kit includes: 860 DSPi Meter, Protective Carrying Case, Shoulder Strap, US AC Power Cable and AC to DC Power Adapter & Battery Charger. Configured with: Power Pack (PP-1), Return Sweep Receiver (SR-1), Return Tester RSVP (VP-1), QAM (QA-2), Forward Sweep (FS-1), Frequency Domain Reflectometer (FDR-1) and Return Transmitter Board (RTB) Options
860 DSPi Field Analyzer

860 DSPi - US (PP-1, SA-1, QA-2, FS-1, FDR-1 & RTB)

Configured with options

The 860 DSPi is a handheld spectrum analyzer with US DOCSIS 3.0 (8x4) modem that provides all of the testing power needed to ensure HFC networks operate to high standards. This includes balancing of the distribution system, maintaining analog and digital signal quality and controlling return path ingress. Standard Testing Features: 6 MHz Channel Spacing, Return Spectrum Analysis (4 to 65 MHz), Forward Spectrum Analysis (4 to 1000 MHz), Level Measurement, C/N Measurement, QAM Measurement (Level/MER/BER), Channel Plan Scan with Tilt Measurement, Ping, Trace Route, VoIP, Throughput, Cable Modem Statistics, Analog HUM, Depth of Modulation, CSO/CTB, FM Deviation, Sweepless Sweep, Line Viewer and QAM Source. Standard Communication Features: RF Test Port (F-Type, Replaceable), US DOCSIS 3.0 Modem 8x4 (100/304 MBPS), RJ45 Electrical Ethernet Port (10/100MBPS), CM to RJ-45 Mode. The complete kit includes: 860 DSPi Meter, Protective Carrying Case, Shoulder Strap, US AC Power Cable and AC to DC Power Adapter & Battery Charger. Configured with: Power Pack (PP-1), Spectrum Analyzer (SA-1), QAM (QA-2), Forward Sweep (FS-1), Frequency Domain Reflectometer (FDR-1) and Return Transmitter Board (RTB) Options
860 DSPi Field Analyzer

860 DSPi - US (PP-1, SR-1, SA-1, QA-2, FS-1, FDR-1 & RTB)

Configured with options

The 860 DSPi is a handheld spectrum analyzer with US DOCSIS 3.0 (8x4) modem that provides all of the testing power needed to ensure HFC networks operate to high standards. This includes balancing of the distribution system, maintaining analog and digital signal quality and controlling return path ingress. Standard Testing Features: 6 MHz Channel Spacing, Return Spectrum Analysis (4 to 65 MHz), Forward Spectrum Analysis (4 to 1000 MHz), Level Measurement, C/N Measurement, QAM Measurement (Level/MER/BER), Channel Plan Scan with Tilt Measurement, Ping, Trace Route, VoIP, Throughput, Cable Modem Statistics, Analog HUM, Depth of Modulation, CSO/CTB, FM Deviation, Sweepless Sweep, Line Viewer and QAM Source. Standard Communication Features: RF Test Port (F-Type, Replaceable), US DOCSIS 3.0 Modem 8x4 (100/304 MBPS), RJ45 Electrical Ethernet Port (10/100MBPS), CM to RJ-45 Mode. The complete kit includes: 860 DSPi Meter, Protective Carrying Case, Shoulder Strap, US AC Power Cable and AC to DC Power Adapter & Battery Charger. Configured with: Power Pack (PP-1), Return Sweep Receiver (SR-1), Spectrum Analyzer (SA-1), QAM (QA-2), Forward Sweep (FS-1), Frequency Domain Reflectometer (FDR-1) and Return Transmitter Board (RTB) Options
860 DSPi Field Analyzer

860 DSPi - US (PP-1, VP-1, SA-1, QA-2, FS-1, FDR-1 & RTB)

Configured with options

The 860 DSPi is a handheld spectrum analyzer with US DOCSIS 3.0 (8x4) modem that provides all of the testing power needed to ensure HFC networks operate to high standards. This includes balancing of the distribution system, maintaining analog and digital signal quality and controlling return path ingress. Standard Testing Features: 6 MHz Channel Spacing, Return Spectrum Analysis (4 to 65 MHz), Forward Spectrum Analysis (4 to 1000 MHz), Level Measurement, C/N Measurement, QAM Measurement (Level/MER/BER), Channel Plan Scan with Tilt Measurement, Ping, Trace Route, VoIP, Throughput, Cable Modem Statistics, Analog HUM, Depth of Modulation, CSO/CTB, FM Deviation, Sweepless Sweep, Line Viewer and QAM Source. Standard Communication Features: RF Test Port (F-Type, Replaceable), US DOCSIS 3.0 Modem 8x4 (100/304 MBPS), RJ45 Electrical Ethernet Port (10/100MBPS), CM to RJ-45 Mode. The complete kit includes: 860 DSPi Meter, Protective Carrying Case, Shoulder Strap, US AC Power Cable and AC to DC Power Adapter & Battery Charger. Configured with: Power Pack (PP-1), Return Tester RSVP (VP-1), Spectrum Analyzer (SA-1), QAM (QA-2), Forward Sweep (FS-1), Frequency Domain Reflectometer (FDR-1) and Return Transmitter Board (RTB) Options
860 DSPi Field Analyzer

860 DSPi - US (PP-1, SR-1, VP-1, SA-1, QA-2, FS-1, FDR-1 & RTB)

Configured with options

The 860 DSPi is a handheld spectrum analyzer with US DOCSIS 3.0 (8x4) modem that provides all of the testing power needed to ensure HFC networks operate to high standards. This includes balancing of the distribution system, maintaining analog and digital signal quality and controlling return path ingress. Standard Testing Features: 6 MHz Channel Spacing, Return Spectrum Analysis (4 to 65 MHz), Forward Spectrum Analysis (4 to 1000 MHz), Level Measurement, C/N Measurement, QAM Measurement (Level/MER/BER), Channel Plan Scan with Tilt Measurement, Ping, Trace Route, VoIP, Throughput, Cable Modem Statistics, Analog HUM, Depth of Modulation, CSO/CTB, FM Deviation, Sweepless Sweep, Line Viewer and QAM Source. Standard Communication Features: RF Test Port (F-Type, Replaceable), US DOCSIS 3.0 Modem 8x4 (100/304 MBPS), RJ45 Electrical Ethernet Port (10/100MBPS), CM to RJ-45 Mode. The complete kit includes: 860 DSPi Meter, Protective Carrying Case, Shoulder Strap, US AC Power Cable and AC to DC Power Adapter & Battery Charger. Configured with: Power Pack (PP-1), Return Sweep Receiver (SR-1), Return Tester RSVP (VP-1), Spectrum Analyzer (SA-1), QAM (QA-2), Forward Sweep (FS-1), Frequency Domain Reflectometer (FDR-1) and Return Transmitter Board (RTB) Options
860 DSPi Field Analyzer

860 DSPi - US (PP-1, VSB, FS-1, FDR-1 & RTB)

Configured with options

The 860 DSPi is a handheld spectrum analyzer with US DOCSIS 3.0 (8x4) modem that provides all of the testing power needed to ensure HFC networks operate to high standards. This includes balancing of the distribution system, maintaining analog and digital signal quality and controlling return path ingress. Standard Testing Features: 6 MHz Channel Spacing, Return Spectrum Analysis (4 to 65 MHz), Forward Spectrum Analysis (4 to 1000 MHz), Level Measurement, C/N Measurement, QAM Measurement (Level/MER/BER), Channel Plan Scan with Tilt Measurement, Ping, Trace Route, VoIP, Throughput, Cable Modem Statistics, Analog HUM, Depth of Modulation, CSO/CTB, FM Deviation, Sweepless Sweep, Line Viewer and QAM Source. Standard Communication Features: RF Test Port (F-Type, Replaceable), US DOCSIS 3.0 Modem 8x4 (100/304 MBPS), RJ45 Electrical Ethernet Port (10/100MBPS), CM to RJ-45 Mode. The complete kit includes: 860 DSPi Meter, Protective Carrying Case, Shoulder Strap, US AC Power Cable and AC to DC Power Adapter & Battery Charger. Configured with: Power Pack (PP-1), Vestigial Side Band Modulation (VSB), Forward Sweep (FS-1), Frequency Domain Reflectometer (FDR-1) and Return Transmitter Board (RTB) Options
860 DSPi Field Analyzer

860 DSPi - US (PP-1, SR-1, VSB, FS-1, FDR-1 & RTB)

Configured with options

The 860 DSPi is a handheld spectrum analyzer with US DOCSIS 3.0 (8x4) modem that provides all of the testing power needed to ensure HFC networks operate to high standards. This includes balancing of the distribution system, maintaining analog and digital signal quality and controlling return path ingress. Standard Testing Features: 6 MHz Channel Spacing, Return Spectrum Analysis (4 to 65 MHz), Forward Spectrum Analysis (4 to 1000 MHz), Level Measurement, C/N Measurement, QAM Measurement (Level/MER/BER), Channel Plan Scan with Tilt Measurement, Ping, Trace Route, VoIP, Throughput, Cable Modem Statistics, Analog HUM, Depth of Modulation, CSO/CTB, FM Deviation, Sweepless Sweep, Line Viewer and QAM Source. Standard Communication Features: RF Test Port (F-Type, Replaceable), US DOCSIS 3.0 Modem 8x4 (100/304 MBPS), RJ45 Electrical Ethernet Port (10/100MBPS), CM to RJ-45 Mode. The complete kit includes: 860 DSPi Meter, Protective Carrying Case, Shoulder Strap, US AC Power Cable and AC to DC Power Adapter & Battery Charger. Configured with: Power Pack (PP-1), Return Sweep Receiver (SR-1), Vestigial Side Band Modulation (VSB), Forward Sweep (FS-1), Frequency Domain Reflectometer (FDR-1) and Return Transmitter Board (RTB) Options
860 DSPi Field Analyzer

860 DSPi - US (PP-1, VP-1, VSB, FS-1, FDR-1 & RTB)

Configured with options

The 860 DSPi is a handheld spectrum analyzer with US DOCSIS 3.0 (8x4) modem that provides all of the testing power needed to ensure HFC networks operate to high standards. This includes balancing of the distribution system, maintaining analog and digital signal quality and controlling return path ingress. Standard Testing Features: 6 MHz Channel Spacing, Return Spectrum Analysis (4 to 65 MHz), Forward Spectrum Analysis (4 to 1000 MHz), Level Measurement, C/N Measurement, QAM Measurement (Level/MER/BER), Channel Plan Scan with Tilt Measurement, Ping, Trace Route, VoIP, Throughput, Cable Modem Statistics, Analog HUM, Depth of Modulation, CSO/CTB, FM Deviation, Sweepless Sweep, Line Viewer and QAM Source. Standard Communication Features: RF Test Port (F-Type, Replaceable), US DOCSIS 3.0 Modem 8x4 (100/304 MBPS), RJ45 Electrical Ethernet Port (10/100MBPS), CM to RJ-45 Mode. The complete kit includes: 860 DSPi Meter, Protective Carrying Case, Shoulder Strap, US AC Power Cable and AC to DC Power Adapter & Battery Charger. Configured with: Power Pack (PP-1), Return Tester RSVP (VP-1), Vestigial Side Band Modulation (VSB), Forward Sweep (FS-1), Frequency Domain Reflectometer (FDR-1) and Return Transmitter Board (RTB) Options
860 DSPi Field Analyzer

860 DSPi - US (PP-1, SR-1, VP-1, VSB, FS-1, FDR-1 & RTB)

Configured with options

The 860 DSPi is a handheld spectrum analyzer with US DOCSIS 3.0 (8x4) modem that provides all of the testing power needed to ensure HFC networks operate to high standards. This includes balancing of the distribution system, maintaining analog and digital signal quality and controlling return path ingress. Standard Testing Features: 6 MHz Channel Spacing, Return Spectrum Analysis (4 to 65 MHz), Forward Spectrum Analysis (4 to 1000 MHz), Level Measurement, C/N Measurement, QAM Measurement (Level/MER/BER), Channel Plan Scan with Tilt Measurement, Ping, Trace Route, VoIP, Throughput, Cable Modem Statistics, Analog HUM, Depth of Modulation, CSO/CTB, FM Deviation, Sweepless Sweep, Line Viewer and QAM Source. Standard Communication Features: RF Test Port (F-Type, Replaceable), US DOCSIS 3.0 Modem 8x4 (100/304 MBPS), RJ45 Electrical Ethernet Port (10/100MBPS), CM to RJ-45 Mode. The complete kit includes: 860 DSPi Meter, Protective Carrying Case, Shoulder Strap, US AC Power Cable and AC to DC Power Adapter & Battery Charger. Configured with: Power Pack (PP-1), Return Sweep Receiver (SR-1), Return Tester RSVP (VP-1), Vestigial Side Band Modulation (VSB), Forward Sweep (FS-1), Frequency Domain Reflectometer (FDR-1) and Return Transmitter Board (RTB) Options
860 DSPi Field Analyzer

860 DSPi - US (PP-1, SA-1, VSB, FS-1, FDR-1 & RTB)

Configured with options

The 860 DSPi is a handheld spectrum analyzer with US DOCSIS 3.0 (8x4) modem that provides all of the testing power needed to ensure HFC networks operate to high standards. This includes balancing of the distribution system, maintaining analog and digital signal quality and controlling return path ingress. Standard Testing Features: 6 MHz Channel Spacing, Return Spectrum Analysis (4 to 65 MHz), Forward Spectrum Analysis (4 to 1000 MHz), Level Measurement, C/N Measurement, QAM Measurement (Level/MER/BER), Channel Plan Scan with Tilt Measurement, Ping, Trace Route, VoIP, Throughput, Cable Modem Statistics, Analog HUM, Depth of Modulation, CSO/CTB, FM Deviation, Sweepless Sweep, Line Viewer and QAM Source. Standard Communication Features: RF Test Port (F-Type, Replaceable), US DOCSIS 3.0 Modem 8x4 (100/304 MBPS), RJ45 Electrical Ethernet Port (10/100MBPS), CM to RJ-45 Mode. The complete kit includes: 860 DSPi Meter, Protective Carrying Case, Shoulder Strap, US AC Power Cable and AC to DC Power Adapter & Battery Charger. Configured with: Power Pack (PP-1), Spectrum Analyzer (SA-1), Vestigial Side Band Modulation (VSB), Forward Sweep (FS-1), Frequency Domain Reflectometer (FDR-1) and Return Transmitter Board (RTB) Options
860 DSPi Field Analyzer

860 DSPi - US (PP-1, SR-1, SA-1, VSB, FS-1, FDR-1 & RTB)

Configured with options

The 860 DSPi is a handheld spectrum analyzer with US DOCSIS 3.0 (8x4) modem that provides all of the testing power needed to ensure HFC networks operate to high standards. This includes balancing of the distribution system, maintaining analog and digital signal quality and controlling return path ingress. Standard Testing Features: 6 MHz Channel Spacing, Return Spectrum Analysis (4 to 65 MHz), Forward Spectrum Analysis (4 to 1000 MHz), Level Measurement, C/N Measurement, QAM Measurement (Level/MER/BER), Channel Plan Scan with Tilt Measurement, Ping, Trace Route, VoIP, Throughput, Cable Modem Statistics, Analog HUM, Depth of Modulation, CSO/CTB, FM Deviation, Sweepless Sweep, Line Viewer and QAM Source. Standard Communication Features: RF Test Port (F-Type, Replaceable), US DOCSIS 3.0 Modem 8x4 (100/304 MBPS), RJ45 Electrical Ethernet Port (10/100MBPS), CM to RJ-45 Mode. The complete kit includes: 860 DSPi Meter, Protective Carrying Case, Shoulder Strap, US AC Power Cable and AC to DC Power Adapter & Battery Charger. Configured with: Power Pack (PP-1), Return Sweep Receiver (SR-1), Spectrum Analyzer (SA-1), Vestigial Side Band Modulation (VSB), Forward Sweep (FS-1), Frequency Domain Reflectometer (FDR-1) and Return Transmitter Board (RTB) Options
860 DSPi Field Analyzer

860 DSPi - US (PP-1, VP-1, SA-1, VSB, FS-1, FDR-1 & RTB)

Configured with options

The 860 DSPi is a handheld spectrum analyzer with US DOCSIS 3.0 (8x4) modem that provides all of the testing power needed to ensure HFC networks operate to high standards. This includes balancing of the distribution system, maintaining analog and digital signal quality and controlling return path ingress. Standard Testing Features: 6 MHz Channel Spacing, Return Spectrum Analysis (4 to 65 MHz), Forward Spectrum Analysis (4 to 1000 MHz), Level Measurement, C/N Measurement, QAM Measurement (Level/MER/BER), Channel Plan Scan with Tilt Measurement, Ping, Trace Route, VoIP, Throughput, Cable Modem Statistics, Analog HUM, Depth of Modulation, CSO/CTB, FM Deviation, Sweepless Sweep, Line Viewer and QAM Source. Standard Communication Features: RF Test Port (F-Type, Replaceable), US DOCSIS 3.0 Modem 8x4 (100/304 MBPS), RJ45 Electrical Ethernet Port (10/100MBPS), CM to RJ-45 Mode. The complete kit includes: 860 DSPi Meter, Protective Carrying Case, Shoulder Strap, US AC Power Cable and AC to DC Power Adapter & Battery Charger. Configured with: Power Pack (PP-1), Return Tester RSVP (VP-1), Spectrum Analyzer (SA-1), Vestigial Side Band Modulation (VSB), Forward Sweep (FS-1), Frequency Domain Reflectometer (FDR-1) and Return Transmitter Board (RTB) Options
860 DSPi Field Analyzer

860 DSPi - US (PP-1, SR-1, VP-1, SA-1, VSB, FS-1, FDR-1 & RTB)

Configured with options

The 860 DSPi is a handheld spectrum analyzer with US DOCSIS 3.0 (8x4) modem that provides all of the testing power needed to ensure HFC networks operate to high standards. This includes balancing of the distribution system, maintaining analog and digital signal quality and controlling return path ingress. Standard Testing Features: 6 MHz Channel Spacing, Return Spectrum Analysis (4 to 65 MHz), Forward Spectrum Analysis (4 to 1000 MHz), Level Measurement, C/N Measurement, QAM Measurement (Level/MER/BER), Channel Plan Scan with Tilt Measurement, Ping, Trace Route, VoIP, Throughput, Cable Modem Statistics, Analog HUM, Depth of Modulation, CSO/CTB, FM Deviation, Sweepless Sweep, Line Viewer and QAM Source. Standard Communication Features: RF Test Port (F-Type, Replaceable), US DOCSIS 3.0 Modem 8x4 (100/304 MBPS), RJ45 Electrical Ethernet Port (10/100MBPS), CM to RJ-45 Mode. The complete kit includes: 860 DSPi Meter, Protective Carrying Case, Shoulder Strap, US AC Power Cable and AC to DC Power Adapter & Battery Charger. Configured with: Power Pack (PP-1), Return Sweep Receiver (SR-1), Return Tester RSVP (VP-1), Spectrum Analyzer (SA-1), Vestigial Side Band Modulation (VSB), Forward Sweep (FS-1), Frequency Domain Reflectometer (FDR-1) and Return Transmitter Board (RTB) Options
860 DSPi Field Analyzer

860 DSPi - US (PP-1, QA-2, VSB, FS-1, FDR-1 & RTB)

Configured with options

The 860 DSPi is a handheld spectrum analyzer with US DOCSIS 3.0 (8x4) modem that provides all of the testing power needed to ensure HFC networks operate to high standards. This includes balancing of the distribution system, maintaining analog and digital signal quality and controlling return path ingress. Standard Testing Features: 6 MHz Channel Spacing, Return Spectrum Analysis (4 to 65 MHz), Forward Spectrum Analysis (4 to 1000 MHz), Level Measurement, C/N Measurement, QAM Measurement (Level/MER/BER), Channel Plan Scan with Tilt Measurement, Ping, Trace Route, VoIP, Throughput, Cable Modem Statistics, Analog HUM, Depth of Modulation, CSO/CTB, FM Deviation, Sweepless Sweep, Line Viewer and QAM Source. Standard Communication Features: RF Test Port (F-Type, Replaceable), US DOCSIS 3.0 Modem 8x4 (100/304 MBPS), RJ45 Electrical Ethernet Port (10/100MBPS), CM to RJ-45 Mode. The complete kit includes: 860 DSPi Meter, Protective Carrying Case, Shoulder Strap, US AC Power Cable and AC to DC Power Adapter & Battery Charger. Configured with: Power Pack (PP-1), QAM (QA-2), Vestigial Side Band Modulation (VSB), Forward Sweep (FS-1), Frequency Domain Reflectometer (FDR-1) and Return Transmitter Board (RTB) Options
860 DSPi Field Analyzer

860 DSPi - US (PP-1, SR-1, QA-2, VSB, FS-1, FDR-1 & RTB)

Configured with options

The 860 DSPi is a handheld spectrum analyzer with US DOCSIS 3.0 (8x4) modem that provides all of the testing power needed to ensure HFC networks operate to high standards. This includes balancing of the distribution system, maintaining analog and digital signal quality and controlling return path ingress. Standard Testing Features: 6 MHz Channel Spacing, Return Spectrum Analysis (4 to 65 MHz), Forward Spectrum Analysis (4 to 1000 MHz), Level Measurement, C/N Measurement, QAM Measurement (Level/MER/BER), Channel Plan Scan with Tilt Measurement, Ping, Trace Route, VoIP, Throughput, Cable Modem Statistics, Analog HUM, Depth of Modulation, CSO/CTB, FM Deviation, Sweepless Sweep, Line Viewer and QAM Source. Standard Communication Features: RF Test Port (F-Type, Replaceable), US DOCSIS 3.0 Modem 8x4 (100/304 MBPS), RJ45 Electrical Ethernet Port (10/100MBPS), CM to RJ-45 Mode. The complete kit includes: 860 DSPi Meter, Protective Carrying Case, Shoulder Strap, US AC Power Cable and AC to DC Power Adapter & Battery Charger. Configured with: Power Pack (PP-1), Return Sweep Receiver (SR-1), QAM (QA-2), Vestigial Side Band Modulation (VSB), Forward Sweep (FS-1), Frequency Domain Reflectometer (FDR-1) and Return Transmitter Board (RTB) Options
860 DSPi Field Analyzer

860 DSPi - US (PP-1, VP-1, QA-2, VSB, FS-1, FDR-1 & RTB)

Configured with options

The 860 DSPi is a handheld spectrum analyzer with US DOCSIS 3.0 (8x4) modem that provides all of the testing power needed to ensure HFC networks operate to high standards. This includes balancing of the distribution system, maintaining analog and digital signal quality and controlling return path ingress. Standard Testing Features: 6 MHz Channel Spacing, Return Spectrum Analysis (4 to 65 MHz), Forward Spectrum Analysis (4 to 1000 MHz), Level Measurement, C/N Measurement, QAM Measurement (Level/MER/BER), Channel Plan Scan with Tilt Measurement, Ping, Trace Route, VoIP, Throughput, Cable Modem Statistics, Analog HUM, Depth of Modulation, CSO/CTB, FM Deviation, Sweepless Sweep, Line Viewer and QAM Source. Standard Communication Features: RF Test Port (F-Type, Replaceable), US DOCSIS 3.0 Modem 8x4 (100/304 MBPS), RJ45 Electrical Ethernet Port (10/100MBPS), CM to RJ-45 Mode. The complete kit includes: 860 DSPi Meter, Protective Carrying Case, Shoulder Strap, US AC Power Cable and AC to DC Power Adapter & Battery Charger. Configured with: Power Pack (PP-1), Return Tester RSVP (VP-1), QAM (QA-2), Vestigial Side Band Modulation (VSB), Forward Sweep (FS-1), Frequency Domain Reflectometer (FDR-1) and Return Transmitter Board (RTB) Options
860 DSPi Field Analyzer

860 DSPi - US (PP-1, SR-1, VP-1, QA-2, VSB, FS-1, FDR-1 & RTB)

Configured with options

The 860 DSPi is a handheld spectrum analyzer with US DOCSIS 3.0 (8x4) modem that provides all of the testing power needed to ensure HFC networks operate to high standards. This includes balancing of the distribution system, maintaining analog and digital signal quality and controlling return path ingress. Standard Testing Features: 6 MHz Channel Spacing, Return Spectrum Analysis (4 to 65 MHz), Forward Spectrum Analysis (4 to 1000 MHz), Level Measurement, C/N Measurement, QAM Measurement (Level/MER/BER), Channel Plan Scan with Tilt Measurement, Ping, Trace Route, VoIP, Throughput, Cable Modem Statistics, Analog HUM, Depth of Modulation, CSO/CTB, FM Deviation, Sweepless Sweep, Line Viewer and QAM Source. Standard Communication Features: RF Test Port (F-Type, Replaceable), US DOCSIS 3.0 Modem 8x4 (100/304 MBPS), RJ45 Electrical Ethernet Port (10/100MBPS), CM to RJ-45 Mode. The complete kit includes: 860 DSPi Meter, Protective Carrying Case, Shoulder Strap, US AC Power Cable and AC to DC Power Adapter & Battery Charger. Configured with: Power Pack (PP-1), Return Sweep Receiver (SR-1), Return Tester RSVP (VP-1), QAM (QA-2), Vestigial Side Band Modulation (VSB), Forward Sweep (FS-1), Frequency Domain Reflectometer (FDR-1) and Return Transmitter Board (RTB) Options
860 DSPi Field Analyzer

860 DSPi - US (PP-1, SA-1, QA-2, VSB, FS-1, FDR-1 & RTB)

Configured with options

The 860 DSPi is a handheld spectrum analyzer with US DOCSIS 3.0 (8x4) modem that provides all of the testing power needed to ensure HFC networks operate to high standards. This includes balancing of the distribution system, maintaining analog and digital signal quality and controlling return path ingress. Standard Testing Features: 6 MHz Channel Spacing, Return Spectrum Analysis (4 to 65 MHz), Forward Spectrum Analysis (4 to 1000 MHz), Level Measurement, C/N Measurement, QAM Measurement (Level/MER/BER), Channel Plan Scan with Tilt Measurement, Ping, Trace Route, VoIP, Throughput, Cable Modem Statistics, Analog HUM, Depth of Modulation, CSO/CTB, FM Deviation, Sweepless Sweep, Line Viewer and QAM Source. Standard Communication Features: RF Test Port (F-Type, Replaceable), US DOCSIS 3.0 Modem 8x4 (100/304 MBPS), RJ45 Electrical Ethernet Port (10/100MBPS), CM to RJ-45 Mode. The complete kit includes: 860 DSPi Meter, Protective Carrying Case, Shoulder Strap, US AC Power Cable and AC to DC Power Adapter & Battery Charger. Configured with: Power Pack (PP-1), Spectrum Analyzer (SA-1), QAM (QA-2), Vestigial Side Band Modulation (VSB), Forward Sweep (FS-1), Frequency Domain Reflectometer (FDR-1) and Return Transmitter Board (RTB) Options
860 DSPi Field Analyzer

860 DSPi - US (PP-1, SR-1, SA-1, QA-2, VSB, FS-1, FDR-1 & RTB)

Configured with options

The 860 DSPi is a handheld spectrum analyzer with US DOCSIS 3.0 (8x4) modem that provides all of the testing power needed to ensure HFC networks operate to high standards. This includes balancing of the distribution system, maintaining analog and digital signal quality and controlling return path ingress. Standard Testing Features: 6 MHz Channel Spacing, Return Spectrum Analysis (4 to 65 MHz), Forward Spectrum Analysis (4 to 1000 MHz), Level Measurement, C/N Measurement, QAM Measurement (Level/MER/BER), Channel Plan Scan with Tilt Measurement, Ping, Trace Route, VoIP, Throughput, Cable Modem Statistics, Analog HUM, Depth of Modulation, CSO/CTB, FM Deviation, Sweepless Sweep, Line Viewer and QAM Source. Standard Communication Features: RF Test Port (F-Type, Replaceable), US DOCSIS 3.0 Modem 8x4 (100/304 MBPS), RJ45 Electrical Ethernet Port (10/100MBPS), CM to RJ-45 Mode. The complete kit includes: 860 DSPi Meter, Protective Carrying Case, Shoulder Strap, US AC Power Cable and AC to DC Power Adapter & Battery Charger. Configured with: Power Pack (PP-1), Return Sweep Receiver (SR-1), Spectrum Analyzer (SA-1), QAM (QA-2), Vestigial Side Band Modulation (VSB), Forward Sweep (FS-1), Frequency Domain Reflectometer (FDR-1) and Return Transmitter Board (RTB) Options
860 DSPi Field Analyzer

860 DSPi - US (PP-1, VP-1, SA-1, QA-2, VSB, FS-1, FDR-1 & RTB)

Configured with options

The 860 DSPi is a handheld spectrum analyzer with US DOCSIS 3.0 (8x4) modem that provides all of the testing power needed to ensure HFC networks operate to high standards. This includes balancing of the distribution system, maintaining analog and digital signal quality and controlling return path ingress. Standard Testing Features: 6 MHz Channel Spacing, Return Spectrum Analysis (4 to 65 MHz), Forward Spectrum Analysis (4 to 1000 MHz), Level Measurement, C/N Measurement, QAM Measurement (Level/MER/BER), Channel Plan Scan with Tilt Measurement, Ping, Trace Route, VoIP, Throughput, Cable Modem Statistics, Analog HUM, Depth of Modulation, CSO/CTB, FM Deviation, Sweepless Sweep, Line Viewer and QAM Source. Standard Communication Features: RF Test Port (F-Type, Replaceable), US DOCSIS 3.0 Modem 8x4 (100/304 MBPS), RJ45 Electrical Ethernet Port (10/100MBPS), CM to RJ-45 Mode. The complete kit includes: 860 DSPi Meter, Protective Carrying Case, Shoulder Strap, US AC Power Cable and AC to DC Power Adapter & Battery Charger. Configured with: Power Pack (PP-1), Return Tester RSVP (VP-1), Spectrum Analyzer (SA-1), QAM (QA-2), Vestigial Side Band Modulation (VSB), Forward Sweep (FS-1), Frequency Domain Reflectometer (FDR-1) and Return Transmitter Board (RTB) Options
860 DSPi Field Analyzer

860 DSPi - US (PP-1, SR-1, VP-1, SA-1, QA-2, VSB, FS-1, FDR-1 & RTB)

Configured with options

The 860 DSPi is a handheld spectrum analyzer with US DOCSIS 3.0 (8x4) modem that provides all of the testing power needed to ensure HFC networks operate to high standards. This includes balancing of the distribution system, maintaining analog and digital signal quality and controlling return path ingress. Standard Testing Features: 6 MHz Channel Spacing, Return Spectrum Analysis (4 to 65 MHz), Forward Spectrum Analysis (4 to 1000 MHz), Level Measurement, C/N Measurement, QAM Measurement (Level/MER/BER), Channel Plan Scan with Tilt Measurement, Ping, Trace Route, VoIP, Throughput, Cable Modem Statistics, Analog HUM, Depth of Modulation, CSO/CTB, FM Deviation, Sweepless Sweep, Line Viewer and QAM Source. Standard Communication Features: RF Test Port (F-Type, Replaceable), US DOCSIS 3.0 Modem 8x4 (100/304 MBPS), RJ45 Electrical Ethernet Port (10/100MBPS), CM to RJ-45 Mode. The complete kit includes: 860 DSPi Meter, Protective Carrying Case, Shoulder Strap, US AC Power Cable and AC to DC Power Adapter & Battery Charger. Configured with: Power Pack (PP-1), Return Sweep Receiver (SR-1), Return Tester RSVP (VP-1), Spectrum Analyzer (SA-1), QAM (QA-2), Vestigial Side Band Modulation (VSB), Forward Sweep (FS-1), Frequency Domain Reflectometer (FDR-1) and Return Transmitter Board (RTB) Options
860 DSPi Field Analyzer

860 DSPi - US (PP-1, VITS, FDR-1 & RTB)

Configured with options

The 860 DSPi is a handheld spectrum analyzer with US DOCSIS 3.0 (8x4) modem that provides all of the testing power needed to ensure HFC networks operate to high standards. This includes balancing of the distribution system, maintaining analog and digital signal quality and controlling return path ingress. Standard Testing Features: 6 MHz Channel Spacing, Return Spectrum Analysis (4 to 65 MHz), Forward Spectrum Analysis (4 to 1000 MHz), Level Measurement, C/N Measurement, QAM Measurement (Level/MER/BER), Channel Plan Scan with Tilt Measurement, Ping, Trace Route, VoIP, Throughput, Cable Modem Statistics, Analog HUM, Depth of Modulation, CSO/CTB, FM Deviation, Sweepless Sweep, Line Viewer and QAM Source. Standard Communication Features: RF Test Port (F-Type, Replaceable), US DOCSIS 3.0 Modem 8x4 (100/304 MBPS), RJ45 Electrical Ethernet Port (10/100MBPS), CM to RJ-45 Mode. The complete kit includes: 860 DSPi Meter, Protective Carrying Case, Shoulder Strap, US AC Power Cable and AC to DC Power Adapter & Battery Charger. Configured with: Power Pack (PP-1), Vertical Interval Test Signals (VITS), Frequency Domain Reflectometer (FDR-1) and Return Transmitter Board (RTB) Options
860 DSPi Field Analyzer

860 DSPi - US (PP-1, SR-1, VITS, FDR-1 & RTB)

Configured with options

The 860 DSPi is a handheld spectrum analyzer with US DOCSIS 3.0 (8x4) modem that provides all of the testing power needed to ensure HFC networks operate to high standards. This includes balancing of the distribution system, maintaining analog and digital signal quality and controlling return path ingress. Standard Testing Features: 6 MHz Channel Spacing, Return Spectrum Analysis (4 to 65 MHz), Forward Spectrum Analysis (4 to 1000 MHz), Level Measurement, C/N Measurement, QAM Measurement (Level/MER/BER), Channel Plan Scan with Tilt Measurement, Ping, Trace Route, VoIP, Throughput, Cable Modem Statistics, Analog HUM, Depth of Modulation, CSO/CTB, FM Deviation, Sweepless Sweep, Line Viewer and QAM Source. Standard Communication Features: RF Test Port (F-Type, Replaceable), US DOCSIS 3.0 Modem 8x4 (100/304 MBPS), RJ45 Electrical Ethernet Port (10/100MBPS), CM to RJ-45 Mode. The complete kit includes: 860 DSPi Meter, Protective Carrying Case, Shoulder Strap, US AC Power Cable and AC to DC Power Adapter & Battery Charger. Configured with: Power Pack (PP-1), Return Sweep Receiver (SR-1), Vertical Interval Test Signals (VITS), Frequency Domain Reflectometer (FDR-1) and Return Transmitter Board (RTB) Options
860 DSPi Field Analyzer

860 DSPi - US (PP-1, VP-1, VITS, FDR-1 & RTB)

Configured with options

The 860 DSPi is a handheld spectrum analyzer with US DOCSIS 3.0 (8x4) modem that provides all of the testing power needed to ensure HFC networks operate to high standards. This includes balancing of the distribution system, maintaining analog and digital signal quality and controlling return path ingress. Standard Testing Features: 6 MHz Channel Spacing, Return Spectrum Analysis (4 to 65 MHz), Forward Spectrum Analysis (4 to 1000 MHz), Level Measurement, C/N Measurement, QAM Measurement (Level/MER/BER), Channel Plan Scan with Tilt Measurement, Ping, Trace Route, VoIP, Throughput, Cable Modem Statistics, Analog HUM, Depth of Modulation, CSO/CTB, FM Deviation, Sweepless Sweep, Line Viewer and QAM Source. Standard Communication Features: RF Test Port (F-Type, Replaceable), US DOCSIS 3.0 Modem 8x4 (100/304 MBPS), RJ45 Electrical Ethernet Port (10/100MBPS), CM to RJ-45 Mode. The complete kit includes: 860 DSPi Meter, Protective Carrying Case, Shoulder Strap, US AC Power Cable and AC to DC Power Adapter & Battery Charger. Configured with: Power Pack (PP-1), Return Tester RSVP (VP-1), Vertical Interval Test Signals (VITS), Frequency Domain Reflectometer (FDR-1) and Return Transmitter Board (RTB) Options
860 DSPi Field Analyzer

860 DSPi - US (PP-1, SR-1, VP-1, VITS, FDR-1 & RTB)

Configured with options

The 860 DSPi is a handheld spectrum analyzer with US DOCSIS 3.0 (8x4) modem that provides all of the testing power needed to ensure HFC networks operate to high standards. This includes balancing of the distribution system, maintaining analog and digital signal quality and controlling return path ingress. Standard Testing Features: 6 MHz Channel Spacing, Return Spectrum Analysis (4 to 65 MHz), Forward Spectrum Analysis (4 to 1000 MHz), Level Measurement, C/N Measurement, QAM Measurement (Level/MER/BER), Channel Plan Scan with Tilt Measurement, Ping, Trace Route, VoIP, Throughput, Cable Modem Statistics, Analog HUM, Depth of Modulation, CSO/CTB, FM Deviation, Sweepless Sweep, Line Viewer and QAM Source. Standard Communication Features: RF Test Port (F-Type, Replaceable), US DOCSIS 3.0 Modem 8x4 (100/304 MBPS), RJ45 Electrical Ethernet Port (10/100MBPS), CM to RJ-45 Mode. The complete kit includes: 860 DSPi Meter, Protective Carrying Case, Shoulder Strap, US AC Power Cable and AC to DC Power Adapter & Battery Charger. Configured with: Power Pack (PP-1), Return Sweep Receiver (SR-1), Return Tester RSVP (VP-1), Vertical Interval Test Signals (VITS), Frequency Domain Reflectometer (FDR-1) and Return Transmitter Board (RTB) Options
860 DSPi Field Analyzer

860 DSPi - US (PP-1, SA-1, VITS, FDR-1 & RTB)

Configured with options

The 860 DSPi is a handheld spectrum analyzer with US DOCSIS 3.0 (8x4) modem that provides all of the testing power needed to ensure HFC networks operate to high standards. This includes balancing of the distribution system, maintaining analog and digital signal quality and controlling return path ingress. Standard Testing Features: 6 MHz Channel Spacing, Return Spectrum Analysis (4 to 65 MHz), Forward Spectrum Analysis (4 to 1000 MHz), Level Measurement, C/N Measurement, QAM Measurement (Level/MER/BER), Channel Plan Scan with Tilt Measurement, Ping, Trace Route, VoIP, Throughput, Cable Modem Statistics, Analog HUM, Depth of Modulation, CSO/CTB, FM Deviation, Sweepless Sweep, Line Viewer and QAM Source. Standard Communication Features: RF Test Port (F-Type, Replaceable), US DOCSIS 3.0 Modem 8x4 (100/304 MBPS), RJ45 Electrical Ethernet Port (10/100MBPS), CM to RJ-45 Mode. The complete kit includes: 860 DSPi Meter, Protective Carrying Case, Shoulder Strap, US AC Power Cable and AC to DC Power Adapter & Battery Charger. Configured with: Power Pack (PP-1), Spectrum Analyzer (SA-1), Vertical Interval Test Signals (VITS), Frequency Domain Reflectometer (FDR-1) and Return Transmitter Board (RTB) Options
860 DSPi Field Analyzer

860 DSPi - US (PP-1, SR-1, SA-1, VITS, FDR-1 & RTB)

Configured with options

The 860 DSPi is a handheld spectrum analyzer with US DOCSIS 3.0 (8x4) modem that provides all of the testing power needed to ensure HFC networks operate to high standards. This includes balancing of the distribution system, maintaining analog and digital signal quality and controlling return path ingress. Standard Testing Features: 6 MHz Channel Spacing, Return Spectrum Analysis (4 to 65 MHz), Forward Spectrum Analysis (4 to 1000 MHz), Level Measurement, C/N Measurement, QAM Measurement (Level/MER/BER), Channel Plan Scan with Tilt Measurement, Ping, Trace Route, VoIP, Throughput, Cable Modem Statistics, Analog HUM, Depth of Modulation, CSO/CTB, FM Deviation, Sweepless Sweep, Line Viewer and QAM Source. Standard Communication Features: RF Test Port (F-Type, Replaceable), US DOCSIS 3.0 Modem 8x4 (100/304 MBPS), RJ45 Electrical Ethernet Port (10/100MBPS), CM to RJ-45 Mode. The complete kit includes: 860 DSPi Meter, Protective Carrying Case, Shoulder Strap, US AC Power Cable and AC to DC Power Adapter & Battery Charger. Configured with: Power Pack (PP-1), Return Sweep Receiver (SR-1), Spectrum Analyzer (SA-1), Vertical Interval Test Signals (VITS), Frequency Domain Reflectometer (FDR-1) and Return Transmitter Board (RTB) Options
860 DSPi Field Analyzer

860 DSPi - US (PP-1, VP-1, SA-1, VITS, FDR-1 & RTB)

Configured with options

The 860 DSPi is a handheld spectrum analyzer with US DOCSIS 3.0 (8x4) modem that provides all of the testing power needed to ensure HFC networks operate to high standards. This includes balancing of the distribution system, maintaining analog and digital signal quality and controlling return path ingress. Standard Testing Features: 6 MHz Channel Spacing, Return Spectrum Analysis (4 to 65 MHz), Forward Spectrum Analysis (4 to 1000 MHz), Level Measurement, C/N Measurement, QAM Measurement (Level/MER/BER), Channel Plan Scan with Tilt Measurement, Ping, Trace Route, VoIP, Throughput, Cable Modem Statistics, Analog HUM, Depth of Modulation, CSO/CTB, FM Deviation, Sweepless Sweep, Line Viewer and QAM Source. Standard Communication Features: RF Test Port (F-Type, Replaceable), US DOCSIS 3.0 Modem 8x4 (100/304 MBPS), RJ45 Electrical Ethernet Port (10/100MBPS), CM to RJ-45 Mode. The complete kit includes: 860 DSPi Meter, Protective Carrying Case, Shoulder Strap, US AC Power Cable and AC to DC Power Adapter & Battery Charger. Configured with: Power Pack (PP-1), Return Tester RSVP (VP-1), Spectrum Analyzer (SA-1), Vertical Interval Test Signals (VITS), Frequency Domain Reflectometer (FDR-1) and Return Transmitter Board (RTB) Options
860 DSPi Field Analyzer

860 DSPi - US (PP-1, SR-1, VP-1, SA-1, VITS, FDR-1 & RTB)

Configured with options

The 860 DSPi is a handheld spectrum analyzer with US DOCSIS 3.0 (8x4) modem that provides all of the testing power needed to ensure HFC networks operate to high standards. This includes balancing of the distribution system, maintaining analog and digital signal quality and controlling return path ingress. Standard Testing Features: 6 MHz Channel Spacing, Return Spectrum Analysis (4 to 65 MHz), Forward Spectrum Analysis (4 to 1000 MHz), Level Measurement, C/N Measurement, QAM Measurement (Level/MER/BER), Channel Plan Scan with Tilt Measurement, Ping, Trace Route, VoIP, Throughput, Cable Modem Statistics, Analog HUM, Depth of Modulation, CSO/CTB, FM Deviation, Sweepless Sweep, Line Viewer and QAM Source. Standard Communication Features: RF Test Port (F-Type, Replaceable), US DOCSIS 3.0 Modem 8x4 (100/304 MBPS), RJ45 Electrical Ethernet Port (10/100MBPS), CM to RJ-45 Mode. The complete kit includes: 860 DSPi Meter, Protective Carrying Case, Shoulder Strap, US AC Power Cable and AC to DC Power Adapter & Battery Charger. Configured with: Power Pack (PP-1), Return Sweep Receiver (SR-1), Return Tester RSVP (VP-1), Spectrum Analyzer (SA-1), Vertical Interval Test Signals (VITS), Frequency Domain Reflectometer (FDR-1) and Return Transmitter Board (RTB) Options
860 DSPi Field Analyzer

860 DSPi - US (PP-1, QA-2, VITS, FDR-1 & RTB)

Configured with options

The 860 DSPi is a handheld spectrum analyzer with US DOCSIS 3.0 (8x4) modem that provides all of the testing power needed to ensure HFC networks operate to high standards. This includes balancing of the distribution system, maintaining analog and digital signal quality and controlling return path ingress. Standard Testing Features: 6 MHz Channel Spacing, Return Spectrum Analysis (4 to 65 MHz), Forward Spectrum Analysis (4 to 1000 MHz), Level Measurement, C/N Measurement, QAM Measurement (Level/MER/BER), Channel Plan Scan with Tilt Measurement, Ping, Trace Route, VoIP, Throughput, Cable Modem Statistics, Analog HUM, Depth of Modulation, CSO/CTB, FM Deviation, Sweepless Sweep, Line Viewer and QAM Source. Standard Communication Features: RF Test Port (F-Type, Replaceable), US DOCSIS 3.0 Modem 8x4 (100/304 MBPS), RJ45 Electrical Ethernet Port (10/100MBPS), CM to RJ-45 Mode. The complete kit includes: 860 DSPi Meter, Protective Carrying Case, Shoulder Strap, US AC Power Cable and AC to DC Power Adapter & Battery Charger. Configured with: Power Pack (PP-1), QAM (QA-2), Vertical Interval Test Signals (VITS), Frequency Domain Reflectometer (FDR-1) and Return Transmitter Board (RTB) Options
860 DSPi Field Analyzer

860 DSPi - US (PP-1, SR-1, QA-2, VITS, FDR-1 & RTB)

Configured with options

The 860 DSPi is a handheld spectrum analyzer with US DOCSIS 3.0 (8x4) modem that provides all of the testing power needed to ensure HFC networks operate to high standards. This includes balancing of the distribution system, maintaining analog and digital signal quality and controlling return path ingress. Standard Testing Features: 6 MHz Channel Spacing, Return Spectrum Analysis (4 to 65 MHz), Forward Spectrum Analysis (4 to 1000 MHz), Level Measurement, C/N Measurement, QAM Measurement (Level/MER/BER), Channel Plan Scan with Tilt Measurement, Ping, Trace Route, VoIP, Throughput, Cable Modem Statistics, Analog HUM, Depth of Modulation, CSO/CTB, FM Deviation, Sweepless Sweep, Line Viewer and QAM Source. Standard Communication Features: RF Test Port (F-Type, Replaceable), US DOCSIS 3.0 Modem 8x4 (100/304 MBPS), RJ45 Electrical Ethernet Port (10/100MBPS), CM to RJ-45 Mode. The complete kit includes: 860 DSPi Meter, Protective Carrying Case, Shoulder Strap, US AC Power Cable and AC to DC Power Adapter & Battery Charger. Configured with: Power Pack (PP-1), Return Sweep Receiver (SR-1), QAM (QA-2), Vertical Interval Test Signals (VITS), Frequency Domain Reflectometer (FDR-1) and Return Transmitter Board (RTB) Options
860 DSPi Field Analyzer

860 DSPi - US (PP-1, VP-1, QA-2, VITS, FDR-1 & RTB)

Configured with options

The 860 DSPi is a handheld spectrum analyzer with US DOCSIS 3.0 (8x4) modem that provides all of the testing power needed to ensure HFC networks operate to high standards. This includes balancing of the distribution system, maintaining analog and digital signal quality and controlling return path ingress. Standard Testing Features: 6 MHz Channel Spacing, Return Spectrum Analysis (4 to 65 MHz), Forward Spectrum Analysis (4 to 1000 MHz), Level Measurement, C/N Measurement, QAM Measurement (Level/MER/BER), Channel Plan Scan with Tilt Measurement, Ping, Trace Route, VoIP, Throughput, Cable Modem Statistics, Analog HUM, Depth of Modulation, CSO/CTB, FM Deviation, Sweepless Sweep, Line Viewer and QAM Source. Standard Communication Features: RF Test Port (F-Type, Replaceable), US DOCSIS 3.0 Modem 8x4 (100/304 MBPS), RJ45 Electrical Ethernet Port (10/100MBPS), CM to RJ-45 Mode. The complete kit includes: 860 DSPi Meter, Protective Carrying Case, Shoulder Strap, US AC Power Cable and AC to DC Power Adapter & Battery Charger. Configured with: Power Pack (PP-1), Return Tester RSVP (VP-1), QAM (QA-2), Vertical Interval Test Signals (VITS), Frequency Domain Reflectometer (FDR-1) and Return Transmitter Board (RTB) Options
860 DSPi Field Analyzer

860 DSPi - US (PP-1, SR-1, VP-1, QA-2, VITS, FDR-1 & RTB)

Configured with options

The 860 DSPi is a handheld spectrum analyzer with US DOCSIS 3.0 (8x4) modem that provides all of the testing power needed to ensure HFC networks operate to high standards. This includes balancing of the distribution system, maintaining analog and digital signal quality and controlling return path ingress. Standard Testing Features: 6 MHz Channel Spacing, Return Spectrum Analysis (4 to 65 MHz), Forward Spectrum Analysis (4 to 1000 MHz), Level Measurement, C/N Measurement, QAM Measurement (Level/MER/BER), Channel Plan Scan with Tilt Measurement, Ping, Trace Route, VoIP, Throughput, Cable Modem Statistics, Analog HUM, Depth of Modulation, CSO/CTB, FM Deviation, Sweepless Sweep, Line Viewer and QAM Source. Standard Communication Features: RF Test Port (F-Type, Replaceable), US DOCSIS 3.0 Modem 8x4 (100/304 MBPS), RJ45 Electrical Ethernet Port (10/100MBPS), CM to RJ-45 Mode. The complete kit includes: 860 DSPi Meter, Protective Carrying Case, Shoulder Strap, US AC Power Cable and AC to DC Power Adapter & Battery Charger. Configured with: Power Pack (PP-1), Return Sweep Receiver (SR-1), Return Tester RSVP (VP-1), QAM (QA-2), Vertical Interval Test Signals (VITS), Frequency Domain Reflectometer (FDR-1) and Return Transmitter Board (RTB) Options
860 DSPi Field Analyzer

860 DSPi - US (PP-1, SA-1, QA-2, VITS, FDR-1 & RTB)

Configured with options

The 860 DSPi is a handheld spectrum analyzer with US DOCSIS 3.0 (8x4) modem that provides all of the testing power needed to ensure HFC networks operate to high standards. This includes balancing of the distribution system, maintaining analog and digital signal quality and controlling return path ingress. Standard Testing Features: 6 MHz Channel Spacing, Return Spectrum Analysis (4 to 65 MHz), Forward Spectrum Analysis (4 to 1000 MHz), Level Measurement, C/N Measurement, QAM Measurement (Level/MER/BER), Channel Plan Scan with Tilt Measurement, Ping, Trace Route, VoIP, Throughput, Cable Modem Statistics, Analog HUM, Depth of Modulation, CSO/CTB, FM Deviation, Sweepless Sweep, Line Viewer and QAM Source. Standard Communication Features: RF Test Port (F-Type, Replaceable), US DOCSIS 3.0 Modem 8x4 (100/304 MBPS), RJ45 Electrical Ethernet Port (10/100MBPS), CM to RJ-45 Mode. The complete kit includes: 860 DSPi Meter, Protective Carrying Case, Shoulder Strap, US AC Power Cable and AC to DC Power Adapter & Battery Charger. Configured with: Power Pack (PP-1), Spectrum Analyzer (SA-1), QAM (QA-2), Vertical Interval Test Signals (VITS), Frequency Domain Reflectometer (FDR-1) and Return Transmitter Board (RTB) Options
860 DSPi Field Analyzer

860 DSPi - US (PP-1, SR-1, SA-1, QA-2, VITS, FDR-1 & RTB)

Configured with options

The 860 DSPi is a handheld spectrum analyzer with US DOCSIS 3.0 (8x4) modem that provides all of the testing power needed to ensure HFC networks operate to high standards. This includes balancing of the distribution system, maintaining analog and digital signal quality and controlling return path ingress. Standard Testing Features: 6 MHz Channel Spacing, Return Spectrum Analysis (4 to 65 MHz), Forward Spectrum Analysis (4 to 1000 MHz), Level Measurement, C/N Measurement, QAM Measurement (Level/MER/BER), Channel Plan Scan with Tilt Measurement, Ping, Trace Route, VoIP, Throughput, Cable Modem Statistics, Analog HUM, Depth of Modulation, CSO/CTB, FM Deviation, Sweepless Sweep, Line Viewer and QAM Source. Standard Communication Features: RF Test Port (F-Type, Replaceable), US DOCSIS 3.0 Modem 8x4 (100/304 MBPS), RJ45 Electrical Ethernet Port (10/100MBPS), CM to RJ-45 Mode. The complete kit includes: 860 DSPi Meter, Protective Carrying Case, Shoulder Strap, US AC Power Cable and AC to DC Power Adapter & Battery Charger. Configured with: Power Pack (PP-1), Return Sweep Receiver (SR-1), Spectrum Analyzer (SA-1), QAM (QA-2), Vertical Interval Test Signals (VITS), Frequency Domain Reflectometer (FDR-1) and Return Transmitter Board (RTB) Options
860 DSPi Field Analyzer

860 DSPi - US (PP-1, VP-1, SA-1, QA-2, VITS, FDR-1 & RTB)

Configured with options

The 860 DSPi is a handheld spectrum analyzer with US DOCSIS 3.0 (8x4) modem that provides all of the testing power needed to ensure HFC networks operate to high standards. This includes balancing of the distribution system, maintaining analog and digital signal quality and controlling return path ingress. Standard Testing Features: 6 MHz Channel Spacing, Return Spectrum Analysis (4 to 65 MHz), Forward Spectrum Analysis (4 to 1000 MHz), Level Measurement, C/N Measurement, QAM Measurement (Level/MER/BER), Channel Plan Scan with Tilt Measurement, Ping, Trace Route, VoIP, Throughput, Cable Modem Statistics, Analog HUM, Depth of Modulation, CSO/CTB, FM Deviation, Sweepless Sweep, Line Viewer and QAM Source. Standard Communication Features: RF Test Port (F-Type, Replaceable), US DOCSIS 3.0 Modem 8x4 (100/304 MBPS), RJ45 Electrical Ethernet Port (10/100MBPS), CM to RJ-45 Mode. The complete kit includes: 860 DSPi Meter, Protective Carrying Case, Shoulder Strap, US AC Power Cable and AC to DC Power Adapter & Battery Charger. Configured with: Power Pack (PP-1), Return Tester RSVP (VP-1), Spectrum Analyzer (SA-1), QAM (QA-2), Vertical Interval Test Signals (VITS), Frequency Domain Reflectometer (FDR-1) and Return Transmitter Board (RTB) Options
860 DSPi Field Analyzer

860 DSPi - US (PP-1, SR-1, VP-1, SA-1, QA-2, VITS, FDR-1 & RTB)

Configured with options

The 860 DSPi is a handheld spectrum analyzer with US DOCSIS 3.0 (8x4) modem that provides all of the testing power needed to ensure HFC networks operate to high standards. This includes balancing of the distribution system, maintaining analog and digital signal quality and controlling return path ingress. Standard Testing Features: 6 MHz Channel Spacing, Return Spectrum Analysis (4 to 65 MHz), Forward Spectrum Analysis (4 to 1000 MHz), Level Measurement, C/N Measurement, QAM Measurement (Level/MER/BER), Channel Plan Scan with Tilt Measurement, Ping, Trace Route, VoIP, Throughput, Cable Modem Statistics, Analog HUM, Depth of Modulation, CSO/CTB, FM Deviation, Sweepless Sweep, Line Viewer and QAM Source. Standard Communication Features: RF Test Port (F-Type, Replaceable), US DOCSIS 3.0 Modem 8x4 (100/304 MBPS), RJ45 Electrical Ethernet Port (10/100MBPS), CM to RJ-45 Mode. The complete kit includes: 860 DSPi Meter, Protective Carrying Case, Shoulder Strap, US AC Power Cable and AC to DC Power Adapter & Battery Charger. Configured with: Power Pack (PP-1), Return Sweep Receiver (SR-1), Return Tester RSVP (VP-1), Spectrum Analyzer (SA-1), QAM (QA-2), Vertical Interval Test Signals (VITS), Frequency Domain Reflectometer (FDR-1) and Return Transmitter Board (RTB) Options
860 DSPi Field Analyzer

860 DSPi - US (PP-1, VSB, VITS, FDR-1 & RTB)

Configured with options

The 860 DSPi is a handheld spectrum analyzer with US DOCSIS 3.0 (8x4) modem that provides all of the testing power needed to ensure HFC networks operate to high standards. This includes balancing of the distribution system, maintaining analog and digital signal quality and controlling return path ingress. Standard Testing Features: 6 MHz Channel Spacing, Return Spectrum Analysis (4 to 65 MHz), Forward Spectrum Analysis (4 to 1000 MHz), Level Measurement, C/N Measurement, QAM Measurement (Level/MER/BER), Channel Plan Scan with Tilt Measurement, Ping, Trace Route, VoIP, Throughput, Cable Modem Statistics, Analog HUM, Depth of Modulation, CSO/CTB, FM Deviation, Sweepless Sweep, Line Viewer and QAM Source. Standard Communication Features: RF Test Port (F-Type, Replaceable), US DOCSIS 3.0 Modem 8x4 (100/304 MBPS), RJ45 Electrical Ethernet Port (10/100MBPS), CM to RJ-45 Mode. The complete kit includes: 860 DSPi Meter, Protective Carrying Case, Shoulder Strap, US AC Power Cable and AC to DC Power Adapter & Battery Charger. Configured with: Power Pack (PP-1), Vestigial Side Band Modulation (VSB), Vertical Interval Test Signals (VITS), Frequency Domain Reflectometer (FDR-1) and Return Transmitter Board (RTB) Options
860 DSPi Field Analyzer

860 DSPi - US (PP-1, SR-1, VSB, VITS, FDR-1 & RTB)

Configured with options

The 860 DSPi is a handheld spectrum analyzer with US DOCSIS 3.0 (8x4) modem that provides all of the testing power needed to ensure HFC networks operate to high standards. This includes balancing of the distribution system, maintaining analog and digital signal quality and controlling return path ingress. Standard Testing Features: 6 MHz Channel Spacing, Return Spectrum Analysis (4 to 65 MHz), Forward Spectrum Analysis (4 to 1000 MHz), Level Measurement, C/N Measurement, QAM Measurement (Level/MER/BER), Channel Plan Scan with Tilt Measurement, Ping, Trace Route, VoIP, Throughput, Cable Modem Statistics, Analog HUM, Depth of Modulation, CSO/CTB, FM Deviation, Sweepless Sweep, Line Viewer and QAM Source. Standard Communication Features: RF Test Port (F-Type, Replaceable), US DOCSIS 3.0 Modem 8x4 (100/304 MBPS), RJ45 Electrical Ethernet Port (10/100MBPS), CM to RJ-45 Mode. The complete kit includes: 860 DSPi Meter, Protective Carrying Case, Shoulder Strap, US AC Power Cable and AC to DC Power Adapter & Battery Charger. Configured with: Power Pack (PP-1), Return Sweep Receiver (SR-1), Vestigial Side Band Modulation (VSB), Vertical Interval Test Signals (VITS), Frequency Domain Reflectometer (FDR-1) and Return Transmitter Board (RTB) Options
860 DSPi Field Analyzer

860 DSPi - US (PP-1, VP-1, VSB, VITS, FDR-1 & RTB)

Configured with options

The 860 DSPi is a handheld spectrum analyzer with US DOCSIS 3.0 (8x4) modem that provides all of the testing power needed to ensure HFC networks operate to high standards. This includes balancing of the distribution system, maintaining analog and digital signal quality and controlling return path ingress. Standard Testing Features: 6 MHz Channel Spacing, Return Spectrum Analysis (4 to 65 MHz), Forward Spectrum Analysis (4 to 1000 MHz), Level Measurement, C/N Measurement, QAM Measurement (Level/MER/BER), Channel Plan Scan with Tilt Measurement, Ping, Trace Route, VoIP, Throughput, Cable Modem Statistics, Analog HUM, Depth of Modulation, CSO/CTB, FM Deviation, Sweepless Sweep, Line Viewer and QAM Source. Standard Communication Features: RF Test Port (F-Type, Replaceable), US DOCSIS 3.0 Modem 8x4 (100/304 MBPS), RJ45 Electrical Ethernet Port (10/100MBPS), CM to RJ-45 Mode. The complete kit includes: 860 DSPi Meter, Protective Carrying Case, Shoulder Strap, US AC Power Cable and AC to DC Power Adapter & Battery Charger. Configured with: Power Pack (PP-1), Return Tester RSVP (VP-1), Vestigial Side Band Modulation (VSB), Vertical Interval Test Signals (VITS), Frequency Domain Reflectometer (FDR-1) and Return Transmitter Board (RTB) Options
860 DSPi Field Analyzer

860 DSPi - US (PP-1, SR-1, VP-1, VSB, VITS, FDR-1 & RTB)

Configured with options

The 860 DSPi is a handheld spectrum analyzer with US DOCSIS 3.0 (8x4) modem that provides all of the testing power needed to ensure HFC networks operate to high standards. This includes balancing of the distribution system, maintaining analog and digital signal quality and controlling return path ingress. Standard Testing Features: 6 MHz Channel Spacing, Return Spectrum Analysis (4 to 65 MHz), Forward Spectrum Analysis (4 to 1000 MHz), Level Measurement, C/N Measurement, QAM Measurement (Level/MER/BER), Channel Plan Scan with Tilt Measurement, Ping, Trace Route, VoIP, Throughput, Cable Modem Statistics, Analog HUM, Depth of Modulation, CSO/CTB, FM Deviation, Sweepless Sweep, Line Viewer and QAM Source. Standard Communication Features: RF Test Port (F-Type, Replaceable), US DOCSIS 3.0 Modem 8x4 (100/304 MBPS), RJ45 Electrical Ethernet Port (10/100MBPS), CM to RJ-45 Mode. The complete kit includes: 860 DSPi Meter, Protective Carrying Case, Shoulder Strap, US AC Power Cable and AC to DC Power Adapter & Battery Charger. Configured with: Power Pack (PP-1), Return Sweep Receiver (SR-1), Return Tester RSVP (VP-1), Vestigial Side Band Modulation (VSB), Vertical Interval Test Signals (VITS), Frequency Domain Reflectometer (FDR-1) and Return Transmitter Board (RTB) Options
860 DSPi Field Analyzer

860 DSPi - US (PP-1, SA-1, VSB, VITS, FDR-1 & RTB)

Configured with options

The 860 DSPi is a handheld spectrum analyzer with US DOCSIS 3.0 (8x4) modem that provides all of the testing power needed to ensure HFC networks operate to high standards. This includes balancing of the distribution system, maintaining analog and digital signal quality and controlling return path ingress. Standard Testing Features: 6 MHz Channel Spacing, Return Spectrum Analysis (4 to 65 MHz), Forward Spectrum Analysis (4 to 1000 MHz), Level Measurement, C/N Measurement, QAM Measurement (Level/MER/BER), Channel Plan Scan with Tilt Measurement, Ping, Trace Route, VoIP, Throughput, Cable Modem Statistics, Analog HUM, Depth of Modulation, CSO/CTB, FM Deviation, Sweepless Sweep, Line Viewer and QAM Source. Standard Communication Features: RF Test Port (F-Type, Replaceable), US DOCSIS 3.0 Modem 8x4 (100/304 MBPS), RJ45 Electrical Ethernet Port (10/100MBPS), CM to RJ-45 Mode. The complete kit includes: 860 DSPi Meter, Protective Carrying Case, Shoulder Strap, US AC Power Cable and AC to DC Power Adapter & Battery Charger. Configured with: Power Pack (PP-1), Spectrum Analyzer (SA-1), Vestigial Side Band Modulation (VSB), Vertical Interval Test Signals (VITS), Frequency Domain Reflectometer (FDR-1) and Return Transmitter Board (RTB) Options
860 DSPi Field Analyzer

860 DSPi - US (PP-1, SR-1, SA-1, VSB, VITS, FDR-1 & RTB)

Configured with options

The 860 DSPi is a handheld spectrum analyzer with US DOCSIS 3.0 (8x4) modem that provides all of the testing power needed to ensure HFC networks operate to high standards. This includes balancing of the distribution system, maintaining analog and digital signal quality and controlling return path ingress. Standard Testing Features: 6 MHz Channel Spacing, Return Spectrum Analysis (4 to 65 MHz), Forward Spectrum Analysis (4 to 1000 MHz), Level Measurement, C/N Measurement, QAM Measurement (Level/MER/BER), Channel Plan Scan with Tilt Measurement, Ping, Trace Route, VoIP, Throughput, Cable Modem Statistics, Analog HUM, Depth of Modulation, CSO/CTB, FM Deviation, Sweepless Sweep, Line Viewer and QAM Source. Standard Communication Features: RF Test Port (F-Type, Replaceable), US DOCSIS 3.0 Modem 8x4 (100/304 MBPS), RJ45 Electrical Ethernet Port (10/100MBPS), CM to RJ-45 Mode. The complete kit includes: 860 DSPi Meter, Protective Carrying Case, Shoulder Strap, US AC Power Cable and AC to DC Power Adapter & Battery Charger. Configured with: Power Pack (PP-1), Return Sweep Receiver (SR-1), Spectrum Analyzer (SA-1), Vestigial Side Band Modulation (VSB), Vertical Interval Test Signals (VITS), Frequency Domain Reflectometer (FDR-1) and Return Transmitter Board (RTB) Options
860 DSPi Field Analyzer

860 DSPi - US (PP-1, VP-1, SA-1, VSB, VITS, FDR-1 & RTB)

Configured with options

The 860 DSPi is a handheld spectrum analyzer with US DOCSIS 3.0 (8x4) modem that provides all of the testing power needed to ensure HFC networks operate to high standards. This includes balancing of the distribution system, maintaining analog and digital signal quality and controlling return path ingress. Standard Testing Features: 6 MHz Channel Spacing, Return Spectrum Analysis (4 to 65 MHz), Forward Spectrum Analysis (4 to 1000 MHz), Level Measurement, C/N Measurement, QAM Measurement (Level/MER/BER), Channel Plan Scan with Tilt Measurement, Ping, Trace Route, VoIP, Throughput, Cable Modem Statistics, Analog HUM, Depth of Modulation, CSO/CTB, FM Deviation, Sweepless Sweep, Line Viewer and QAM Source. Standard Communication Features: RF Test Port (F-Type, Replaceable), US DOCSIS 3.0 Modem 8x4 (100/304 MBPS), RJ45 Electrical Ethernet Port (10/100MBPS), CM to RJ-45 Mode. The complete kit includes: 860 DSPi Meter, Protective Carrying Case, Shoulder Strap, US AC Power Cable and AC to DC Power Adapter & Battery Charger. Configured with: Power Pack (PP-1), Return Tester RSVP (VP-1), Spectrum Analyzer (SA-1), Vestigial Side Band Modulation (VSB), Vertical Interval Test Signals (VITS), Frequency Domain Reflectometer (FDR-1) and Return Transmitter Board (RTB) Options
860 DSPi Field Analyzer

860 DSPi - US (PP-1, SR-1, VP-1, SA-1, VSB, VITS, FDR-1 & RTB)

Configured with options

The 860 DSPi is a handheld spectrum analyzer with US DOCSIS 3.0 (8x4) modem that provides all of the testing power needed to ensure HFC networks operate to high standards. This includes balancing of the distribution system, maintaining analog and digital signal quality and controlling return path ingress. Standard Testing Features: 6 MHz Channel Spacing, Return Spectrum Analysis (4 to 65 MHz), Forward Spectrum Analysis (4 to 1000 MHz), Level Measurement, C/N Measurement, QAM Measurement (Level/MER/BER), Channel Plan Scan with Tilt Measurement, Ping, Trace Route, VoIP, Throughput, Cable Modem Statistics, Analog HUM, Depth of Modulation, CSO/CTB, FM Deviation, Sweepless Sweep, Line Viewer and QAM Source. Standard Communication Features: RF Test Port (F-Type, Replaceable), US DOCSIS 3.0 Modem 8x4 (100/304 MBPS), RJ45 Electrical Ethernet Port (10/100MBPS), CM to RJ-45 Mode. The complete kit includes: 860 DSPi Meter, Protective Carrying Case, Shoulder Strap, US AC Power Cable and AC to DC Power Adapter & Battery Charger. Configured with: Power Pack (PP-1), Return Sweep Receiver (SR-1), Return Tester RSVP (VP-1), Spectrum Analyzer (SA-1), Vestigial Side Band Modulation (VSB), Vertical Interval Test Signals (VITS), Frequency Domain Reflectometer (FDR-1) and Return Transmitter Board (RTB) Options
860 DSPi Field Analyzer

860 DSPi - US (PP-1, QA-2, VSB, VITS, FDR-1 & RTB)

Configured with options

The 860 DSPi is a handheld spectrum analyzer with US DOCSIS 3.0 (8x4) modem that provides all of the testing power needed to ensure HFC networks operate to high standards. This includes balancing of the distribution system, maintaining analog and digital signal quality and controlling return path ingress. Standard Testing Features: 6 MHz Channel Spacing, Return Spectrum Analysis (4 to 65 MHz), Forward Spectrum Analysis (4 to 1000 MHz), Level Measurement, C/N Measurement, QAM Measurement (Level/MER/BER), Channel Plan Scan with Tilt Measurement, Ping, Trace Route, VoIP, Throughput, Cable Modem Statistics, Analog HUM, Depth of Modulation, CSO/CTB, FM Deviation, Sweepless Sweep, Line Viewer and QAM Source. Standard Communication Features: RF Test Port (F-Type, Replaceable), US DOCSIS 3.0 Modem 8x4 (100/304 MBPS), RJ45 Electrical Ethernet Port (10/100MBPS), CM to RJ-45 Mode. The complete kit includes: 860 DSPi Meter, Protective Carrying Case, Shoulder Strap, US AC Power Cable and AC to DC Power Adapter & Battery Charger. Configured with: Power Pack (PP-1), QAM (QA-2), Vestigial Side Band Modulation (VSB), Vertical Interval Test Signals (VITS), Frequency Domain Reflectometer (FDR-1) and Return Transmitter Board (RTB) Options
860 DSPi Field Analyzer

860 DSPi - US (PP-1, SR-1, QA-2, VSB, VITS, FDR-1 & RTB)

Configured with options

The 860 DSPi is a handheld spectrum analyzer with US DOCSIS 3.0 (8x4) modem that provides all of the testing power needed to ensure HFC networks operate to high standards. This includes balancing of the distribution system, maintaining analog and digital signal quality and controlling return path ingress. Standard Testing Features: 6 MHz Channel Spacing, Return Spectrum Analysis (4 to 65 MHz), Forward Spectrum Analysis (4 to 1000 MHz), Level Measurement, C/N Measurement, QAM Measurement (Level/MER/BER), Channel Plan Scan with Tilt Measurement, Ping, Trace Route, VoIP, Throughput, Cable Modem Statistics, Analog HUM, Depth of Modulation, CSO/CTB, FM Deviation, Sweepless Sweep, Line Viewer and QAM Source. Standard Communication Features: RF Test Port (F-Type, Replaceable), US DOCSIS 3.0 Modem 8x4 (100/304 MBPS), RJ45 Electrical Ethernet Port (10/100MBPS), CM to RJ-45 Mode. The complete kit includes: 860 DSPi Meter, Protective Carrying Case, Shoulder Strap, US AC Power Cable and AC to DC Power Adapter & Battery Charger. Configured with: Power Pack (PP-1), Return Sweep Receiver (SR-1), QAM (QA-2), Vestigial Side Band Modulation (VSB), Vertical Interval Test Signals (VITS), Frequency Domain Reflectometer (FDR-1) and Return Transmitter Board (RTB) Options
860 DSPi Field Analyzer

860 DSPi - US (PP-1, VP-1, QA-2, VSB, VITS, FDR-1 & RTB)

Configured with options

The 860 DSPi is a handheld spectrum analyzer with US DOCSIS 3.0 (8x4) modem that provides all of the testing power needed to ensure HFC networks operate to high standards. This includes balancing of the distribution system, maintaining analog and digital signal quality and controlling return path ingress. Standard Testing Features: 6 MHz Channel Spacing, Return Spectrum Analysis (4 to 65 MHz), Forward Spectrum Analysis (4 to 1000 MHz), Level Measurement, C/N Measurement, QAM Measurement (Level/MER/BER), Channel Plan Scan with Tilt Measurement, Ping, Trace Route, VoIP, Throughput, Cable Modem Statistics, Analog HUM, Depth of Modulation, CSO/CTB, FM Deviation, Sweepless Sweep, Line Viewer and QAM Source. Standard Communication Features: RF Test Port (F-Type, Replaceable), US DOCSIS 3.0 Modem 8x4 (100/304 MBPS), RJ45 Electrical Ethernet Port (10/100MBPS), CM to RJ-45 Mode. The complete kit includes: 860 DSPi Meter, Protective Carrying Case, Shoulder Strap, US AC Power Cable and AC to DC Power Adapter & Battery Charger. Configured with: Power Pack (PP-1), Return Tester RSVP (VP-1), QAM (QA-2), Vestigial Side Band Modulation (VSB), Vertical Interval Test Signals (VITS), Frequency Domain Reflectometer (FDR-1) and Return Transmitter Board (RTB) Options
860 DSPi Field Analyzer

860 DSPi - US (PP-1, SR-1, VP-1, QA-2, VSB, VITS, FDR-1 & RTB)

Configured with options

The 860 DSPi is a handheld spectrum analyzer with US DOCSIS 3.0 (8x4) modem that provides all of the testing power needed to ensure HFC networks operate to high standards. This includes balancing of the distribution system, maintaining analog and digital signal quality and controlling return path ingress. Standard Testing Features: 6 MHz Channel Spacing, Return Spectrum Analysis (4 to 65 MHz), Forward Spectrum Analysis (4 to 1000 MHz), Level Measurement, C/N Measurement, QAM Measurement (Level/MER/BER), Channel Plan Scan with Tilt Measurement, Ping, Trace Route, VoIP, Throughput, Cable Modem Statistics, Analog HUM, Depth of Modulation, CSO/CTB, FM Deviation, Sweepless Sweep, Line Viewer and QAM Source. Standard Communication Features: RF Test Port (F-Type, Replaceable), US DOCSIS 3.0 Modem 8x4 (100/304 MBPS), RJ45 Electrical Ethernet Port (10/100MBPS), CM to RJ-45 Mode. The complete kit includes: 860 DSPi Meter, Protective Carrying Case, Shoulder Strap, US AC Power Cable and AC to DC Power Adapter & Battery Charger. Configured with: Power Pack (PP-1), Return Sweep Receiver (SR-1), Return Tester RSVP (VP-1), QAM (QA-2), Vestigial Side Band Modulation (VSB), Vertical Interval Test Signals (VITS), Frequency Domain Reflectometer (FDR-1) and Return Transmitter Board (RTB) Options
860 DSPi Field Analyzer

860 DSPi - US (PP-1, SA-1, QA-2, VSB, VITS, FDR-1 & RTB)

Configured with options

The 860 DSPi is a handheld spectrum analyzer with US DOCSIS 3.0 (8x4) modem that provides all of the testing power needed to ensure HFC networks operate to high standards. This includes balancing of the distribution system, maintaining analog and digital signal quality and controlling return path ingress. Standard Testing Features: 6 MHz Channel Spacing, Return Spectrum Analysis (4 to 65 MHz), Forward Spectrum Analysis (4 to 1000 MHz), Level Measurement, C/N Measurement, QAM Measurement (Level/MER/BER), Channel Plan Scan with Tilt Measurement, Ping, Trace Route, VoIP, Throughput, Cable Modem Statistics, Analog HUM, Depth of Modulation, CSO/CTB, FM Deviation, Sweepless Sweep, Line Viewer and QAM Source. Standard Communication Features: RF Test Port (F-Type, Replaceable), US DOCSIS 3.0 Modem 8x4 (100/304 MBPS), RJ45 Electrical Ethernet Port (10/100MBPS), CM to RJ-45 Mode. The complete kit includes: 860 DSPi Meter, Protective Carrying Case, Shoulder Strap, US AC Power Cable and AC to DC Power Adapter & Battery Charger. Configured with: Power Pack (PP-1), Spectrum Analyzer (SA-1), QAM (QA-2), Vestigial Side Band Modulation (VSB), Vertical Interval Test Signals (VITS), Frequency Domain Reflectometer (FDR-1) and Return Transmitter Board (RTB) Options
860 DSPi Field Analyzer

860 DSPi - US (PP-1, SR-1, SA-1, QA-2, VSB, VITS, FDR-1 & RTB)

Configured with options

The 860 DSPi is a handheld spectrum analyzer with US DOCSIS 3.0 (8x4) modem that provides all of the testing power needed to ensure HFC networks operate to high standards. This includes balancing of the distribution system, maintaining analog and digital signal quality and controlling return path ingress. Standard Testing Features: 6 MHz Channel Spacing, Return Spectrum Analysis (4 to 65 MHz), Forward Spectrum Analysis (4 to 1000 MHz), Level Measurement, C/N Measurement, QAM Measurement (Level/MER/BER), Channel Plan Scan with Tilt Measurement, Ping, Trace Route, VoIP, Throughput, Cable Modem Statistics, Analog HUM, Depth of Modulation, CSO/CTB, FM Deviation, Sweepless Sweep, Line Viewer and QAM Source. Standard Communication Features: RF Test Port (F-Type, Replaceable), US DOCSIS 3.0 Modem 8x4 (100/304 MBPS), RJ45 Electrical Ethernet Port (10/100MBPS), CM to RJ-45 Mode. The complete kit includes: 860 DSPi Meter, Protective Carrying Case, Shoulder Strap, US AC Power Cable and AC to DC Power Adapter & Battery Charger. Configured with: Power Pack (PP-1), Return Sweep Receiver (SR-1), Spectrum Analyzer (SA-1), QAM (QA-2), Vestigial Side Band Modulation (VSB), Vertical Interval Test Signals (VITS), Frequency Domain Reflectometer (FDR-1) and Return Transmitter Board (RTB) Options
860 DSPi Field Analyzer

860 DSPi - US (PP-1, VP-1, SA-1, QA-2, VSB, VITS, FDR-1 & RTB)

Configured with options

The 860 DSPi is a handheld spectrum analyzer with US DOCSIS 3.0 (8x4) modem that provides all of the testing power needed to ensure HFC networks operate to high standards. This includes balancing of the distribution system, maintaining analog and digital signal quality and controlling return path ingress. Standard Testing Features: 6 MHz Channel Spacing, Return Spectrum Analysis (4 to 65 MHz), Forward Spectrum Analysis (4 to 1000 MHz), Level Measurement, C/N Measurement, QAM Measurement (Level/MER/BER), Channel Plan Scan with Tilt Measurement, Ping, Trace Route, VoIP, Throughput, Cable Modem Statistics, Analog HUM, Depth of Modulation, CSO/CTB, FM Deviation, Sweepless Sweep, Line Viewer and QAM Source. Standard Communication Features: RF Test Port (F-Type, Replaceable), US DOCSIS 3.0 Modem 8x4 (100/304 MBPS), RJ45 Electrical Ethernet Port (10/100MBPS), CM to RJ-45 Mode. The complete kit includes: 860 DSPi Meter, Protective Carrying Case, Shoulder Strap, US AC Power Cable and AC to DC Power Adapter & Battery Charger. Configured with: Power Pack (PP-1), Return Tester RSVP (VP-1), Spectrum Analyzer (SA-1), QAM (QA-2), Vestigial Side Band Modulation (VSB), Vertical Interval Test Signals (VITS), Frequency Domain Reflectometer (FDR-1) and Return Transmitter Board (RTB) Options
860 DSPi Field Analyzer

860 DSPi - US (PP-1, SR-1, VP-1, SA-1, QA-2, VSB, VITS, FDR-1 & RTB)

Configured with options

The 860 DSPi is a handheld spectrum analyzer with US DOCSIS 3.0 (8x4) modem that provides all of the testing power needed to ensure HFC networks operate to high standards. This includes balancing of the distribution system, maintaining analog and digital signal quality and controlling return path ingress. Standard Testing Features: 6 MHz Channel Spacing, Return Spectrum Analysis (4 to 65 MHz), Forward Spectrum Analysis (4 to 1000 MHz), Level Measurement, C/N Measurement, QAM Measurement (Level/MER/BER), Channel Plan Scan with Tilt Measurement, Ping, Trace Route, VoIP, Throughput, Cable Modem Statistics, Analog HUM, Depth of Modulation, CSO/CTB, FM Deviation, Sweepless Sweep, Line Viewer and QAM Source. Standard Communication Features: RF Test Port (F-Type, Replaceable), US DOCSIS 3.0 Modem 8x4 (100/304 MBPS), RJ45 Electrical Ethernet Port (10/100MBPS), CM to RJ-45 Mode. The complete kit includes: 860 DSPi Meter, Protective Carrying Case, Shoulder Strap, US AC Power Cable and AC to DC Power Adapter & Battery Charger. Configured with: Power Pack (PP-1), Return Sweep Receiver (SR-1), Return Tester RSVP (VP-1), Spectrum Analyzer (SA-1), QAM (QA-2), Vestigial Side Band Modulation (VSB), Vertical Interval Test Signals (VITS), Frequency Domain Reflectometer (FDR-1) and Return Transmitter Board (RTB) Options
860 DSPi Field Analyzer

860 DSPi - US (PP-1, FS-1, VITS, FDR-1 & RTB)

Configured with options

The 860 DSPi is a handheld spectrum analyzer with US DOCSIS 3.0 (8x4) modem that provides all of the testing power needed to ensure HFC networks operate to high standards. This includes balancing of the distribution system, maintaining analog and digital signal quality and controlling return path ingress. Standard Testing Features: 6 MHz Channel Spacing, Return Spectrum Analysis (4 to 65 MHz), Forward Spectrum Analysis (4 to 1000 MHz), Level Measurement, C/N Measurement, QAM Measurement (Level/MER/BER), Channel Plan Scan with Tilt Measurement, Ping, Trace Route, VoIP, Throughput, Cable Modem Statistics, Analog HUM, Depth of Modulation, CSO/CTB, FM Deviation, Sweepless Sweep, Line Viewer and QAM Source. Standard Communication Features: RF Test Port (F-Type, Replaceable), US DOCSIS 3.0 Modem 8x4 (100/304 MBPS), RJ45 Electrical Ethernet Port (10/100MBPS), CM to RJ-45 Mode. The complete kit includes: 860 DSPi Meter, Protective Carrying Case, Shoulder Strap, US AC Power Cable and AC to DC Power Adapter & Battery Charger. Configured with: Power Pack (PP-1), Forward Sweep (FS-1), Vertical Interval Test Signals (VITS), Frequency Domain Reflectometer (FDR-1) and Return Transmitter Board (RTB) Options
860 DSPi Field Analyzer

860 DSPi - US (PP-1, SR-1, FS-1, VITS, FDR-1 & RTB)

Configured with options

The 860 DSPi is a handheld spectrum analyzer with US DOCSIS 3.0 (8x4) modem that provides all of the testing power needed to ensure HFC networks operate to high standards. This includes balancing of the distribution system, maintaining analog and digital signal quality and controlling return path ingress. Standard Testing Features: 6 MHz Channel Spacing, Return Spectrum Analysis (4 to 65 MHz), Forward Spectrum Analysis (4 to 1000 MHz), Level Measurement, C/N Measurement, QAM Measurement (Level/MER/BER), Channel Plan Scan with Tilt Measurement, Ping, Trace Route, VoIP, Throughput, Cable Modem Statistics, Analog HUM, Depth of Modulation, CSO/CTB, FM Deviation, Sweepless Sweep, Line Viewer and QAM Source. Standard Communication Features: RF Test Port (F-Type, Replaceable), US DOCSIS 3.0 Modem 8x4 (100/304 MBPS), RJ45 Electrical Ethernet Port (10/100MBPS), CM to RJ-45 Mode. The complete kit includes: 860 DSPi Meter, Protective Carrying Case, Shoulder Strap, US AC Power Cable and AC to DC Power Adapter & Battery Charger. Configured with: Power Pack (PP-1), Return Sweep Receiver (SR-1), Forward Sweep (FS-1), Vertical Interval Test Signals (VITS), Frequency Domain Reflectometer (FDR-1) and Return Transmitter Board (RTB) Options
860 DSPi Field Analyzer

860 DSPi - US (PP-1, VP-1, FS-1, VITS, FDR-1 & RTB)

Configured with options

The 860 DSPi is a handheld spectrum analyzer with US DOCSIS 3.0 (8x4) modem that provides all of the testing power needed to ensure HFC networks operate to high standards. This includes balancing of the distribution system, maintaining analog and digital signal quality and controlling return path ingress. Standard Testing Features: 6 MHz Channel Spacing, Return Spectrum Analysis (4 to 65 MHz), Forward Spectrum Analysis (4 to 1000 MHz), Level Measurement, C/N Measurement, QAM Measurement (Level/MER/BER), Channel Plan Scan with Tilt Measurement, Ping, Trace Route, VoIP, Throughput, Cable Modem Statistics, Analog HUM, Depth of Modulation, CSO/CTB, FM Deviation, Sweepless Sweep, Line Viewer and QAM Source. Standard Communication Features: RF Test Port (F-Type, Replaceable), US DOCSIS 3.0 Modem 8x4 (100/304 MBPS), RJ45 Electrical Ethernet Port (10/100MBPS), CM to RJ-45 Mode. The complete kit includes: 860 DSPi Meter, Protective Carrying Case, Shoulder Strap, US AC Power Cable and AC to DC Power Adapter & Battery Charger. Configured with: Power Pack (PP-1), Return Tester RSVP (VP-1), Forward Sweep (FS-1), Vertical Interval Test Signals (VITS), Frequency Domain Reflectometer (FDR-1) and Return Transmitter Board (RTB) Options
860 DSPi Field Analyzer

860 DSPi - US (PP-1, SR-1, VP-1, FS-1, VITS, FDR-1 & RTB)

Configured with options

The 860 DSPi is a handheld spectrum analyzer with US DOCSIS 3.0 (8x4) modem that provides all of the testing power needed to ensure HFC networks operate to high standards. This includes balancing of the distribution system, maintaining analog and digital signal quality and controlling return path ingress. Standard Testing Features: 6 MHz Channel Spacing, Return Spectrum Analysis (4 to 65 MHz), Forward Spectrum Analysis (4 to 1000 MHz), Level Measurement, C/N Measurement, QAM Measurement (Level/MER/BER), Channel Plan Scan with Tilt Measurement, Ping, Trace Route, VoIP, Throughput, Cable Modem Statistics, Analog HUM, Depth of Modulation, CSO/CTB, FM Deviation, Sweepless Sweep, Line Viewer and QAM Source. Standard Communication Features: RF Test Port (F-Type, Replaceable), US DOCSIS 3.0 Modem 8x4 (100/304 MBPS), RJ45 Electrical Ethernet Port (10/100MBPS), CM to RJ-45 Mode. The complete kit includes: 860 DSPi Meter, Protective Carrying Case, Shoulder Strap, US AC Power Cable and AC to DC Power Adapter & Battery Charger. Configured with: Power Pack (PP-1), Return Sweep Receiver (SR-1), Return Tester RSVP (VP-1), Forward Sweep (FS-1), Vertical Interval Test Signals (VITS), Frequency Domain Reflectometer (FDR-1) and Return Transmitter Board (RTB) Options
860 DSPi Field Analyzer

860 DSPi - US (PP-1, SA-1, FS-1, VITS, FDR-1 & RTB)

Configured with options

The 860 DSPi is a handheld spectrum analyzer with US DOCSIS 3.0 (8x4) modem that provides all of the testing power needed to ensure HFC networks operate to high standards. This includes balancing of the distribution system, maintaining analog and digital signal quality and controlling return path ingress. Standard Testing Features: 6 MHz Channel Spacing, Return Spectrum Analysis (4 to 65 MHz), Forward Spectrum Analysis (4 to 1000 MHz), Level Measurement, C/N Measurement, QAM Measurement (Level/MER/BER), Channel Plan Scan with Tilt Measurement, Ping, Trace Route, VoIP, Throughput, Cable Modem Statistics, Analog HUM, Depth of Modulation, CSO/CTB, FM Deviation, Sweepless Sweep, Line Viewer and QAM Source. Standard Communication Features: RF Test Port (F-Type, Replaceable), US DOCSIS 3.0 Modem 8x4 (100/304 MBPS), RJ45 Electrical Ethernet Port (10/100MBPS), CM to RJ-45 Mode. The complete kit includes: 860 DSPi Meter, Protective Carrying Case, Shoulder Strap, US AC Power Cable and AC to DC Power Adapter & Battery Charger. Configured with: Power Pack (PP-1), Spectrum Analyzer (SA-1), Forward Sweep (FS-1), Vertical Interval Test Signals (VITS), Frequency Domain Reflectometer (FDR-1) and Return Transmitter Board (RTB) Options
860 DSPi Field Analyzer

860 DSPi - US (PP-1, SR-1, SA-1, FS-1, VITS, FDR-1 & RTB)

Configured with options

The 860 DSPi is a handheld spectrum analyzer with US DOCSIS 3.0 (8x4) modem that provides all of the testing power needed to ensure HFC networks operate to high standards. This includes balancing of the distribution system, maintaining analog and digital signal quality and controlling return path ingress. Standard Testing Features: 6 MHz Channel Spacing, Return Spectrum Analysis (4 to 65 MHz), Forward Spectrum Analysis (4 to 1000 MHz), Level Measurement, C/N Measurement, QAM Measurement (Level/MER/BER), Channel Plan Scan with Tilt Measurement, Ping, Trace Route, VoIP, Throughput, Cable Modem Statistics, Analog HUM, Depth of Modulation, CSO/CTB, FM Deviation, Sweepless Sweep, Line Viewer and QAM Source. Standard Communication Features: RF Test Port (F-Type, Replaceable), US DOCSIS 3.0 Modem 8x4 (100/304 MBPS), RJ45 Electrical Ethernet Port (10/100MBPS), CM to RJ-45 Mode. The complete kit includes: 860 DSPi Meter, Protective Carrying Case, Shoulder Strap, US AC Power Cable and AC to DC Power Adapter & Battery Charger. Configured with: Power Pack (PP-1), Return Sweep Receiver (SR-1), Spectrum Analyzer (SA-1), Forward Sweep (FS-1), Vertical Interval Test Signals (VITS), Frequency Domain Reflectometer (FDR-1) and Return Transmitter Board (RTB) Options
860 DSPi Field Analyzer

860 DSPi - US (PP-1, VP-1, SA-1, FS-1, VITS, FDR-1 & RTB)

Configured with options

The 860 DSPi is a handheld spectrum analyzer with US DOCSIS 3.0 (8x4) modem that provides all of the testing power needed to ensure HFC networks operate to high standards. This includes balancing of the distribution system, maintaining analog and digital signal quality and controlling return path ingress. Standard Testing Features: 6 MHz Channel Spacing, Return Spectrum Analysis (4 to 65 MHz), Forward Spectrum Analysis (4 to 1000 MHz), Level Measurement, C/N Measurement, QAM Measurement (Level/MER/BER), Channel Plan Scan with Tilt Measurement, Ping, Trace Route, VoIP, Throughput, Cable Modem Statistics, Analog HUM, Depth of Modulation, CSO/CTB, FM Deviation, Sweepless Sweep, Line Viewer and QAM Source. Standard Communication Features: RF Test Port (F-Type, Replaceable), US DOCSIS 3.0 Modem 8x4 (100/304 MBPS), RJ45 Electrical Ethernet Port (10/100MBPS), CM to RJ-45 Mode. The complete kit includes: 860 DSPi Meter, Protective Carrying Case, Shoulder Strap, US AC Power Cable and AC to DC Power Adapter & Battery Charger. Configured with: Power Pack (PP-1), Return Tester RSVP (VP-1), Spectrum Analyzer (SA-1), Forward Sweep (FS-1), Vertical Interval Test Signals (VITS), Frequency Domain Reflectometer (FDR-1) and Return Transmitter Board (RTB) Options
860 DSPi Field Analyzer

860 DSPi - US (PP-1, SR-1, VP-1, SA-1, FS-1, VITS, FDR-1 & RTB)

Configured with options

The 860 DSPi is a handheld spectrum analyzer with US DOCSIS 3.0 (8x4) modem that provides all of the testing power needed to ensure HFC networks operate to high standards. This includes balancing of the distribution system, maintaining analog and digital signal quality and controlling return path ingress. Standard Testing Features: 6 MHz Channel Spacing, Return Spectrum Analysis (4 to 65 MHz), Forward Spectrum Analysis (4 to 1000 MHz), Level Measurement, C/N Measurement, QAM Measurement (Level/MER/BER), Channel Plan Scan with Tilt Measurement, Ping, Trace Route, VoIP, Throughput, Cable Modem Statistics, Analog HUM, Depth of Modulation, CSO/CTB, FM Deviation, Sweepless Sweep, Line Viewer and QAM Source. Standard Communication Features: RF Test Port (F-Type, Replaceable), US DOCSIS 3.0 Modem 8x4 (100/304 MBPS), RJ45 Electrical Ethernet Port (10/100MBPS), CM to RJ-45 Mode. The complete kit includes: 860 DSPi Meter, Protective Carrying Case, Shoulder Strap, US AC Power Cable and AC to DC Power Adapter & Battery Charger. Configured with: Power Pack (PP-1), Return Sweep Receiver (SR-1), Return Tester RSVP (VP-1), Spectrum Analyzer (SA-1), Forward Sweep (FS-1), Vertical Interval Test Signals (VITS), Frequency Domain Reflectometer (FDR-1) and Return Transmitter Board (RTB) Options
860 DSPi Field Analyzer

860 DSPi - US (PP-1, QA-2, FS-1, VITS, FDR-1 & RTB)

Configured with options

The 860 DSPi is a handheld spectrum analyzer with US DOCSIS 3.0 (8x4) modem that provides all of the testing power needed to ensure HFC networks operate to high standards. This includes balancing of the distribution system, maintaining analog and digital signal quality and controlling return path ingress. Standard Testing Features: 6 MHz Channel Spacing, Return Spectrum Analysis (4 to 65 MHz), Forward Spectrum Analysis (4 to 1000 MHz), Level Measurement, C/N Measurement, QAM Measurement (Level/MER/BER), Channel Plan Scan with Tilt Measurement, Ping, Trace Route, VoIP, Throughput, Cable Modem Statistics, Analog HUM, Depth of Modulation, CSO/CTB, FM Deviation, Sweepless Sweep, Line Viewer and QAM Source. Standard Communication Features: RF Test Port (F-Type, Replaceable), US DOCSIS 3.0 Modem 8x4 (100/304 MBPS), RJ45 Electrical Ethernet Port (10/100MBPS), CM to RJ-45 Mode. The complete kit includes: 860 DSPi Meter, Protective Carrying Case, Shoulder Strap, US AC Power Cable and AC to DC Power Adapter & Battery Charger. Configured with: Power Pack (PP-1), QAM (QA-2), Forward Sweep (FS-1), Vertical Interval Test Signals (VITS), Frequency Domain Reflectometer (FDR-1) and Return Transmitter Board (RTB) Options
860 DSPi Field Analyzer

860 DSPi - US (PP-1, SR-1, QA-2, FS-1, VITS, FDR-1 & RTB)

Configured with options

The 860 DSPi is a handheld spectrum analyzer with US DOCSIS 3.0 (8x4) modem that provides all of the testing power needed to ensure HFC networks operate to high standards. This includes balancing of the distribution system, maintaining analog and digital signal quality and controlling return path ingress. Standard Testing Features: 6 MHz Channel Spacing, Return Spectrum Analysis (4 to 65 MHz), Forward Spectrum Analysis (4 to 1000 MHz), Level Measurement, C/N Measurement, QAM Measurement (Level/MER/BER), Channel Plan Scan with Tilt Measurement, Ping, Trace Route, VoIP, Throughput, Cable Modem Statistics, Analog HUM, Depth of Modulation, CSO/CTB, FM Deviation, Sweepless Sweep, Line Viewer and QAM Source. Standard Communication Features: RF Test Port (F-Type, Replaceable), US DOCSIS 3.0 Modem 8x4 (100/304 MBPS), RJ45 Electrical Ethernet Port (10/100MBPS), CM to RJ-45 Mode. The complete kit includes: 860 DSPi Meter, Protective Carrying Case, Shoulder Strap, US AC Power Cable and AC to DC Power Adapter & Battery Charger. Configured with: Power Pack (PP-1), Return Sweep Receiver (SR-1), QAM (QA-2), Forward Sweep (FS-1), Vertical Interval Test Signals (VITS), Frequency Domain Reflectometer (FDR-1) and Return Transmitter Board (RTB) Options
860 DSPi Field Analyzer

860 DSPi - US (PP-1, VP-1, QA-2, FS-1, VITS, FDR-1 & RTB)

Configured with options

The 860 DSPi is a handheld spectrum analyzer with US DOCSIS 3.0 (8x4) modem that provides all of the testing power needed to ensure HFC networks operate to high standards. This includes balancing of the distribution system, maintaining analog and digital signal quality and controlling return path ingress. Standard Testing Features: 6 MHz Channel Spacing, Return Spectrum Analysis (4 to 65 MHz), Forward Spectrum Analysis (4 to 1000 MHz), Level Measurement, C/N Measurement, QAM Measurement (Level/MER/BER), Channel Plan Scan with Tilt Measurement, Ping, Trace Route, VoIP, Throughput, Cable Modem Statistics, Analog HUM, Depth of Modulation, CSO/CTB, FM Deviation, Sweepless Sweep, Line Viewer and QAM Source. Standard Communication Features: RF Test Port (F-Type, Replaceable), US DOCSIS 3.0 Modem 8x4 (100/304 MBPS), RJ45 Electrical Ethernet Port (10/100MBPS), CM to RJ-45 Mode. The complete kit includes: 860 DSPi Meter, Protective Carrying Case, Shoulder Strap, US AC Power Cable and AC to DC Power Adapter & Battery Charger. Configured with: Power Pack (PP-1), Return Tester RSVP (VP-1), QAM (QA-2), Forward Sweep (FS-1), Vertical Interval Test Signals (VITS), Frequency Domain Reflectometer (FDR-1) and Return Transmitter Board (RTB) Options
860 DSPi Field Analyzer

860 DSPi - US (PP-1, SR-1, VP-1, QA-2, FS-1, VITS, FDR-1 & RTB)

Configured with options

The 860 DSPi is a handheld spectrum analyzer with US DOCSIS 3.0 (8x4) modem that provides all of the testing power needed to ensure HFC networks operate to high standards. This includes balancing of the distribution system, maintaining analog and digital signal quality and controlling return path ingress. Standard Testing Features: 6 MHz Channel Spacing, Return Spectrum Analysis (4 to 65 MHz), Forward Spectrum Analysis (4 to 1000 MHz), Level Measurement, C/N Measurement, QAM Measurement (Level/MER/BER), Channel Plan Scan with Tilt Measurement, Ping, Trace Route, VoIP, Throughput, Cable Modem Statistics, Analog HUM, Depth of Modulation, CSO/CTB, FM Deviation, Sweepless Sweep, Line Viewer and QAM Source. Standard Communication Features: RF Test Port (F-Type, Replaceable), US DOCSIS 3.0 Modem 8x4 (100/304 MBPS), RJ45 Electrical Ethernet Port (10/100MBPS), CM to RJ-45 Mode. The complete kit includes: 860 DSPi Meter, Protective Carrying Case, Shoulder Strap, US AC Power Cable and AC to DC Power Adapter & Battery Charger. Configured with: Power Pack (PP-1), Return Sweep Receiver (SR-1), Return Tester RSVP (VP-1), QAM (QA-2), Forward Sweep (FS-1), Vertical Interval Test Signals (VITS), Frequency Domain Reflectometer (FDR-1) and Return Transmitter Board (RTB) Options
860 DSPi Field Analyzer

860 DSPi - US (PP-1, SA-1, QA-2, FS-1, VITS, FDR-1 & RTB)

Configured with options

The 860 DSPi is a handheld spectrum analyzer with US DOCSIS 3.0 (8x4) modem that provides all of the testing power needed to ensure HFC networks operate to high standards. This includes balancing of the distribution system, maintaining analog and digital signal quality and controlling return path ingress. Standard Testing Features: 6 MHz Channel Spacing, Return Spectrum Analysis (4 to 65 MHz), Forward Spectrum Analysis (4 to 1000 MHz), Level Measurement, C/N Measurement, QAM Measurement (Level/MER/BER), Channel Plan Scan with Tilt Measurement, Ping, Trace Route, VoIP, Throughput, Cable Modem Statistics, Analog HUM, Depth of Modulation, CSO/CTB, FM Deviation, Sweepless Sweep, Line Viewer and QAM Source. Standard Communication Features: RF Test Port (F-Type, Replaceable), US DOCSIS 3.0 Modem 8x4 (100/304 MBPS), RJ45 Electrical Ethernet Port (10/100MBPS), CM to RJ-45 Mode. The complete kit includes: 860 DSPi Meter, Protective Carrying Case, Shoulder Strap, US AC Power Cable and AC to DC Power Adapter & Battery Charger. Configured with: Power Pack (PP-1), Spectrum Analyzer (SA-1), QAM (QA-2), Forward Sweep (FS-1), Vertical Interval Test Signals (VITS), Frequency Domain Reflectometer (FDR-1) and Return Transmitter Board (RTB) Options
860 DSPi Field Analyzer

860 DSPi - US (PP-1, SR-1, SA-1, QA-2, FS-1, VITS, FDR-1 & RTB)

Configured with options

The 860 DSPi is a handheld spectrum analyzer with US DOCSIS 3.0 (8x4) modem that provides all of the testing power needed to ensure HFC networks operate to high standards. This includes balancing of the distribution system, maintaining analog and digital signal quality and controlling return path ingress. Standard Testing Features: 6 MHz Channel Spacing, Return Spectrum Analysis (4 to 65 MHz), Forward Spectrum Analysis (4 to 1000 MHz), Level Measurement, C/N Measurement, QAM Measurement (Level/MER/BER), Channel Plan Scan with Tilt Measurement, Ping, Trace Route, VoIP, Throughput, Cable Modem Statistics, Analog HUM, Depth of Modulation, CSO/CTB, FM Deviation, Sweepless Sweep, Line Viewer and QAM Source. Standard Communication Features: RF Test Port (F-Type, Replaceable), US DOCSIS 3.0 Modem 8x4 (100/304 MBPS), RJ45 Electrical Ethernet Port (10/100MBPS), CM to RJ-45 Mode. The complete kit includes: 860 DSPi Meter, Protective Carrying Case, Shoulder Strap, US AC Power Cable and AC to DC Power Adapter & Battery Charger. Configured with: Power Pack (PP-1), Return Sweep Receiver (SR-1), Spectrum Analyzer (SA-1), QAM (QA-2), Forward Sweep (FS-1), Vertical Interval Test Signals (VITS), Frequency Domain Reflectometer (FDR-1) and Return Transmitter Board (RTB) Options
860 DSPi Field Analyzer

860 DSPi - US (PP-1, VP-1, SA-1, QA-2, FS-1, VITS, FDR-1 & RTB)

Configured with options

The 860 DSPi is a handheld spectrum analyzer with US DOCSIS 3.0 (8x4) modem that provides all of the testing power needed to ensure HFC networks operate to high standards. This includes balancing of the distribution system, maintaining analog and digital signal quality and controlling return path ingress. Standard Testing Features: 6 MHz Channel Spacing, Return Spectrum Analysis (4 to 65 MHz), Forward Spectrum Analysis (4 to 1000 MHz), Level Measurement, C/N Measurement, QAM Measurement (Level/MER/BER), Channel Plan Scan with Tilt Measurement, Ping, Trace Route, VoIP, Throughput, Cable Modem Statistics, Analog HUM, Depth of Modulation, CSO/CTB, FM Deviation, Sweepless Sweep, Line Viewer and QAM Source. Standard Communication Features: RF Test Port (F-Type, Replaceable), US DOCSIS 3.0 Modem 8x4 (100/304 MBPS), RJ45 Electrical Ethernet Port (10/100MBPS), CM to RJ-45 Mode. The complete kit includes: 860 DSPi Meter, Protective Carrying Case, Shoulder Strap, US AC Power Cable and AC to DC Power Adapter & Battery Charger. Configured with: Power Pack (PP-1), Return Tester RSVP (VP-1), Spectrum Analyzer (SA-1), QAM (QA-2), Forward Sweep (FS-1), Vertical Interval Test Signals (VITS), Frequency Domain Reflectometer (FDR-1) and Return Transmitter Board (RTB) Options
860 DSPi Field Analyzer

860 DSPi - US (PP-1, SR-1, VP-1, SA-1, QA-2, FS-1, VITS, FDR-1 & RTB)

Configured with options

The 860 DSPi is a handheld spectrum analyzer with US DOCSIS 3.0 (8x4) modem that provides all of the testing power needed to ensure HFC networks operate to high standards. This includes balancing of the distribution system, maintaining analog and digital signal quality and controlling return path ingress. Standard Testing Features: 6 MHz Channel Spacing, Return Spectrum Analysis (4 to 65 MHz), Forward Spectrum Analysis (4 to 1000 MHz), Level Measurement, C/N Measurement, QAM Measurement (Level/MER/BER), Channel Plan Scan with Tilt Measurement, Ping, Trace Route, VoIP, Throughput, Cable Modem Statistics, Analog HUM, Depth of Modulation, CSO/CTB, FM Deviation, Sweepless Sweep, Line Viewer and QAM Source. Standard Communication Features: RF Test Port (F-Type, Replaceable), US DOCSIS 3.0 Modem 8x4 (100/304 MBPS), RJ45 Electrical Ethernet Port (10/100MBPS), CM to RJ-45 Mode. The complete kit includes: 860 DSPi Meter, Protective Carrying Case, Shoulder Strap, US AC Power Cable and AC to DC Power Adapter & Battery Charger. Configured with: Power Pack (PP-1), Return Sweep Receiver (SR-1), Return Tester RSVP (VP-1), Spectrum Analyzer (SA-1), QAM (QA-2), Forward Sweep (FS-1), Vertical Interval Test Signals (VITS), Frequency Domain Reflectometer (FDR-1) and Return Transmitter Board (RTB) Options
860 DSPi Field Analyzer

860 DSPi - US (PP-1, VSB, FS-1, VITS, FDR-1 & RTB)

Configured with options

The 860 DSPi is a handheld spectrum analyzer with US DOCSIS 3.0 (8x4) modem that provides all of the testing power needed to ensure HFC networks operate to high standards. This includes balancing of the distribution system, maintaining analog and digital signal quality and controlling return path ingress. Standard Testing Features: 6 MHz Channel Spacing, Return Spectrum Analysis (4 to 65 MHz), Forward Spectrum Analysis (4 to 1000 MHz), Level Measurement, C/N Measurement, QAM Measurement (Level/MER/BER), Channel Plan Scan with Tilt Measurement, Ping, Trace Route, VoIP, Throughput, Cable Modem Statistics, Analog HUM, Depth of Modulation, CSO/CTB, FM Deviation, Sweepless Sweep, Line Viewer and QAM Source. Standard Communication Features: RF Test Port (F-Type, Replaceable), US DOCSIS 3.0 Modem 8x4 (100/304 MBPS), RJ45 Electrical Ethernet Port (10/100MBPS), CM to RJ-45 Mode. The complete kit includes: 860 DSPi Meter, Protective Carrying Case, Shoulder Strap, US AC Power Cable and AC to DC Power Adapter & Battery Charger. Configured with: Power Pack (PP-1), Vestigial Side Band Modulation (VSB), Forward Sweep (FS-1), Vertical Interval Test Signals (VITS), Frequency Domain Reflectometer (FDR-1) and Return Transmitter Board (RTB) Options
860 DSPi Field Analyzer

860 DSPi - US (PP-1, SR-1, VSB, FS-1, VITS, FDR-1 & RTB)

Configured with options

The 860 DSPi is a handheld spectrum analyzer with US DOCSIS 3.0 (8x4) modem that provides all of the testing power needed to ensure HFC networks operate to high standards. This includes balancing of the distribution system, maintaining analog and digital signal quality and controlling return path ingress. Standard Testing Features: 6 MHz Channel Spacing, Return Spectrum Analysis (4 to 65 MHz), Forward Spectrum Analysis (4 to 1000 MHz), Level Measurement, C/N Measurement, QAM Measurement (Level/MER/BER), Channel Plan Scan with Tilt Measurement, Ping, Trace Route, VoIP, Throughput, Cable Modem Statistics, Analog HUM, Depth of Modulation, CSO/CTB, FM Deviation, Sweepless Sweep, Line Viewer and QAM Source. Standard Communication Features: RF Test Port (F-Type, Replaceable), US DOCSIS 3.0 Modem 8x4 (100/304 MBPS), RJ45 Electrical Ethernet Port (10/100MBPS), CM to RJ-45 Mode. The complete kit includes: 860 DSPi Meter, Protective Carrying Case, Shoulder Strap, US AC Power Cable and AC to DC Power Adapter & Battery Charger. Configured with: Power Pack (PP-1), Return Sweep Receiver (SR-1), Vestigial Side Band Modulation (VSB), Forward Sweep (FS-1), Vertical Interval Test Signals (VITS), Frequency Domain Reflectometer (FDR-1) and Return Transmitter Board (RTB) Options
860 DSPi Field Analyzer

860 DSPi - US (PP-1, VP-1, VSB, FS-1, VITS, FDR-1 & RTB)

Configured with options

The 860 DSPi is a handheld spectrum analyzer with US DOCSIS 3.0 (8x4) modem that provides all of the testing power needed to ensure HFC networks operate to high standards. This includes balancing of the distribution system, maintaining analog and digital signal quality and controlling return path ingress. Standard Testing Features: 6 MHz Channel Spacing, Return Spectrum Analysis (4 to 65 MHz), Forward Spectrum Analysis (4 to 1000 MHz), Level Measurement, C/N Measurement, QAM Measurement (Level/MER/BER), Channel Plan Scan with Tilt Measurement, Ping, Trace Route, VoIP, Throughput, Cable Modem Statistics, Analog HUM, Depth of Modulation, CSO/CTB, FM Deviation, Sweepless Sweep, Line Viewer and QAM Source. Standard Communication Features: RF Test Port (F-Type, Replaceable), US DOCSIS 3.0 Modem 8x4 (100/304 MBPS), RJ45 Electrical Ethernet Port (10/100MBPS), CM to RJ-45 Mode. The complete kit includes: 860 DSPi Meter, Protective Carrying Case, Shoulder Strap, US AC Power Cable and AC to DC Power Adapter & Battery Charger. Configured with: Power Pack (PP-1), Return Tester RSVP (VP-1), Vestigial Side Band Modulation (VSB), Forward Sweep (FS-1), Vertical Interval Test Signals (VITS), Frequency Domain Reflectometer (FDR-1) and Return Transmitter Board (RTB) Options
860 DSPi Field Analyzer

860 DSPi - US (PP-1, SR-1, VP-1, VSB, FS-1, VITS, FDR-1 & RTB)

Configured with options

The 860 DSPi is a handheld spectrum analyzer with US DOCSIS 3.0 (8x4) modem that provides all of the testing power needed to ensure HFC networks operate to high standards. This includes balancing of the distribution system, maintaining analog and digital signal quality and controlling return path ingress. Standard Testing Features: 6 MHz Channel Spacing, Return Spectrum Analysis (4 to 65 MHz), Forward Spectrum Analysis (4 to 1000 MHz), Level Measurement, C/N Measurement, QAM Measurement (Level/MER/BER), Channel Plan Scan with Tilt Measurement, Ping, Trace Route, VoIP, Throughput, Cable Modem Statistics, Analog HUM, Depth of Modulation, CSO/CTB, FM Deviation, Sweepless Sweep, Line Viewer and QAM Source. Standard Communication Features: RF Test Port (F-Type, Replaceable), US DOCSIS 3.0 Modem 8x4 (100/304 MBPS), RJ45 Electrical Ethernet Port (10/100MBPS), CM to RJ-45 Mode. The complete kit includes: 860 DSPi Meter, Protective Carrying Case, Shoulder Strap, US AC Power Cable and AC to DC Power Adapter & Battery Charger. Configured with: Power Pack (PP-1), Return Sweep Receiver (SR-1), Return Tester RSVP (VP-1), Vestigial Side Band Modulation (VSB), Forward Sweep (FS-1), Vertical Interval Test Signals (VITS), Frequency Domain Reflectometer (FDR-1) and Return Transmitter Board (RTB) Options
860 DSPi Field Analyzer

860 DSPi - US (PP-1, SA-1, VSB, FS-1, VITS, FDR-1 & RTB)

Configured with options

The 860 DSPi is a handheld spectrum analyzer with US DOCSIS 3.0 (8x4) modem that provides all of the testing power needed to ensure HFC networks operate to high standards. This includes balancing of the distribution system, maintaining analog and digital signal quality and controlling return path ingress. Standard Testing Features: 6 MHz Channel Spacing, Return Spectrum Analysis (4 to 65 MHz), Forward Spectrum Analysis (4 to 1000 MHz), Level Measurement, C/N Measurement, QAM Measurement (Level/MER/BER), Channel Plan Scan with Tilt Measurement, Ping, Trace Route, VoIP, Throughput, Cable Modem Statistics, Analog HUM, Depth of Modulation, CSO/CTB, FM Deviation, Sweepless Sweep, Line Viewer and QAM Source. Standard Communication Features: RF Test Port (F-Type, Replaceable), US DOCSIS 3.0 Modem 8x4 (100/304 MBPS), RJ45 Electrical Ethernet Port (10/100MBPS), CM to RJ-45 Mode. The complete kit includes: 860 DSPi Meter, Protective Carrying Case, Shoulder Strap, US AC Power Cable and AC to DC Power Adapter & Battery Charger. Configured with: Power Pack (PP-1), Spectrum Analyzer (SA-1), Vestigial Side Band Modulation (VSB), Forward Sweep (FS-1), Vertical Interval Test Signals (VITS), Frequency Domain Reflectometer (FDR-1) and Return Transmitter Board (RTB) Options
860 DSPi Field Analyzer

860 DSPi - US (PP-1, SR-1, SA-1, VSB, FS-1, VITS, FDR-1 & RTB)

Configured with options

The 860 DSPi is a handheld spectrum analyzer with US DOCSIS 3.0 (8x4) modem that provides all of the testing power needed to ensure HFC networks operate to high standards. This includes balancing of the distribution system, maintaining analog and digital signal quality and controlling return path ingress. Standard Testing Features: 6 MHz Channel Spacing, Return Spectrum Analysis (4 to 65 MHz), Forward Spectrum Analysis (4 to 1000 MHz), Level Measurement, C/N Measurement, QAM Measurement (Level/MER/BER), Channel Plan Scan with Tilt Measurement, Ping, Trace Route, VoIP, Throughput, Cable Modem Statistics, Analog HUM, Depth of Modulation, CSO/CTB, FM Deviation, Sweepless Sweep, Line Viewer and QAM Source. Standard Communication Features: RF Test Port (F-Type, Replaceable), US DOCSIS 3.0 Modem 8x4 (100/304 MBPS), RJ45 Electrical Ethernet Port (10/100MBPS), CM to RJ-45 Mode. The complete kit includes: 860 DSPi Meter, Protective Carrying Case, Shoulder Strap, US AC Power Cable and AC to DC Power Adapter & Battery Charger. Configured with: Power Pack (PP-1), Return Sweep Receiver (SR-1), Spectrum Analyzer (SA-1), Vestigial Side Band Modulation (VSB), Forward Sweep (FS-1), Vertical Interval Test Signals (VITS), Frequency Domain Reflectometer (FDR-1) and Return Transmitter Board (RTB) Options
860 DSPi Field Analyzer

860 DSPi - US (PP-1, VP-1, SA-1, VSB, FS-1, VITS, FDR-1 & RTB)

Configured with options

The 860 DSPi is a handheld spectrum analyzer with US DOCSIS 3.0 (8x4) modem that provides all of the testing power needed to ensure HFC networks operate to high standards. This includes balancing of the distribution system, maintaining analog and digital signal quality and controlling return path ingress. Standard Testing Features: 6 MHz Channel Spacing, Return Spectrum Analysis (4 to 65 MHz), Forward Spectrum Analysis (4 to 1000 MHz), Level Measurement, C/N Measurement, QAM Measurement (Level/MER/BER), Channel Plan Scan with Tilt Measurement, Ping, Trace Route, VoIP, Throughput, Cable Modem Statistics, Analog HUM, Depth of Modulation, CSO/CTB, FM Deviation, Sweepless Sweep, Line Viewer and QAM Source. Standard Communication Features: RF Test Port (F-Type, Replaceable), US DOCSIS 3.0 Modem 8x4 (100/304 MBPS), RJ45 Electrical Ethernet Port (10/100MBPS), CM to RJ-45 Mode. The complete kit includes: 860 DSPi Meter, Protective Carrying Case, Shoulder Strap, US AC Power Cable and AC to DC Power Adapter & Battery Charger. Configured with: Power Pack (PP-1), Return Tester RSVP (VP-1), Spectrum Analyzer (SA-1), Vestigial Side Band Modulation (VSB), Forward Sweep (FS-1), Vertical Interval Test Signals (VITS), Frequency Domain Reflectometer (FDR-1) and Return Transmitter Board (RTB) Options
860 DSPi Field Analyzer

860 DSPi - US (PP-1, SR-1, VP-1, SA-1, VSB, FS-1, VITS, FDR-1 & RTB)

Configured with options

The 860 DSPi is a handheld spectrum analyzer with US DOCSIS 3.0 (8x4) modem that provides all of the testing power needed to ensure HFC networks operate to high standards. This includes balancing of the distribution system, maintaining analog and digital signal quality and controlling return path ingress. Standard Testing Features: 6 MHz Channel Spacing, Return Spectrum Analysis (4 to 65 MHz), Forward Spectrum Analysis (4 to 1000 MHz), Level Measurement, C/N Measurement, QAM Measurement (Level/MER/BER), Channel Plan Scan with Tilt Measurement, Ping, Trace Route, VoIP, Throughput, Cable Modem Statistics, Analog HUM, Depth of Modulation, CSO/CTB, FM Deviation, Sweepless Sweep, Line Viewer and QAM Source. Standard Communication Features: RF Test Port (F-Type, Replaceable), US DOCSIS 3.0 Modem 8x4 (100/304 MBPS), RJ45 Electrical Ethernet Port (10/100MBPS), CM to RJ-45 Mode. The complete kit includes: 860 DSPi Meter, Protective Carrying Case, Shoulder Strap, US AC Power Cable and AC to DC Power Adapter & Battery Charger. Configured with: Power Pack (PP-1), Return Sweep Receiver (SR-1), Return Tester RSVP (VP-1), Spectrum Analyzer (SA-1), Vestigial Side Band Modulation (VSB), Forward Sweep (FS-1), Vertical Interval Test Signals (VITS), Frequency Domain Reflectometer (FDR-1) and Return Transmitter Board (RTB) Options
860 DSPi Field Analyzer

860 DSPi - US (PP-1, QA-2, VSB, FS-1, VITS, FDR-1 & RTB)

Configured with options

The 860 DSPi is a handheld spectrum analyzer with US DOCSIS 3.0 (8x4) modem that provides all of the testing power needed to ensure HFC networks operate to high standards. This includes balancing of the distribution system, maintaining analog and digital signal quality and controlling return path ingress. Standard Testing Features: 6 MHz Channel Spacing, Return Spectrum Analysis (4 to 65 MHz), Forward Spectrum Analysis (4 to 1000 MHz), Level Measurement, C/N Measurement, QAM Measurement (Level/MER/BER), Channel Plan Scan with Tilt Measurement, Ping, Trace Route, VoIP, Throughput, Cable Modem Statistics, Analog HUM, Depth of Modulation, CSO/CTB, FM Deviation, Sweepless Sweep, Line Viewer and QAM Source. Standard Communication Features: RF Test Port (F-Type, Replaceable), US DOCSIS 3.0 Modem 8x4 (100/304 MBPS), RJ45 Electrical Ethernet Port (10/100MBPS), CM to RJ-45 Mode. The complete kit includes: 860 DSPi Meter, Protective Carrying Case, Shoulder Strap, US AC Power Cable and AC to DC Power Adapter & Battery Charger. Configured with: Power Pack (PP-1), QAM (QA-2), Vestigial Side Band Modulation (VSB), Forward Sweep (FS-1), Vertical Interval Test Signals (VITS), Frequency Domain Reflectometer (FDR-1) and Return Transmitter Board (RTB) Options
860 DSPi Field Analyzer

860 DSPi - US (PP-1, SR-1, QA-2, VSB, FS-1, VITS, FDR-1 & RTB)

Configured with options

The 860 DSPi is a handheld spectrum analyzer with US DOCSIS 3.0 (8x4) modem that provides all of the testing power needed to ensure HFC networks operate to high standards. This includes balancing of the distribution system, maintaining analog and digital signal quality and controlling return path ingress. Standard Testing Features: 6 MHz Channel Spacing, Return Spectrum Analysis (4 to 65 MHz), Forward Spectrum Analysis (4 to 1000 MHz), Level Measurement, C/N Measurement, QAM Measurement (Level/MER/BER), Channel Plan Scan with Tilt Measurement, Ping, Trace Route, VoIP, Throughput, Cable Modem Statistics, Analog HUM, Depth of Modulation, CSO/CTB, FM Deviation, Sweepless Sweep, Line Viewer and QAM Source. Standard Communication Features: RF Test Port (F-Type, Replaceable), US DOCSIS 3.0 Modem 8x4 (100/304 MBPS), RJ45 Electrical Ethernet Port (10/100MBPS), CM to RJ-45 Mode. The complete kit includes: 860 DSPi Meter, Protective Carrying Case, Shoulder Strap, US AC Power Cable and AC to DC Power Adapter & Battery Charger. Configured with: Power Pack (PP-1), Return Sweep Receiver (SR-1), QAM (QA-2), Vestigial Side Band Modulation (VSB), Forward Sweep (FS-1), Vertical Interval Test Signals (VITS), Frequency Domain Reflectometer (FDR-1) and Return Transmitter Board (RTB) Options
860 DSPi Field Analyzer

860 DSPi - US (PP-1, VP-1, QA-2, VSB, FS-1, VITS, FDR-1 & RTB)

Configured with options

The 860 DSPi is a handheld spectrum analyzer with US DOCSIS 3.0 (8x4) modem that provides all of the testing power needed to ensure HFC networks operate to high standards. This includes balancing of the distribution system, maintaining analog and digital signal quality and controlling return path ingress. Standard Testing Features: 6 MHz Channel Spacing, Return Spectrum Analysis (4 to 65 MHz), Forward Spectrum Analysis (4 to 1000 MHz), Level Measurement, C/N Measurement, QAM Measurement (Level/MER/BER), Channel Plan Scan with Tilt Measurement, Ping, Trace Route, VoIP, Throughput, Cable Modem Statistics, Analog HUM, Depth of Modulation, CSO/CTB, FM Deviation, Sweepless Sweep, Line Viewer and QAM Source. Standard Communication Features: RF Test Port (F-Type, Replaceable), US DOCSIS 3.0 Modem 8x4 (100/304 MBPS), RJ45 Electrical Ethernet Port (10/100MBPS), CM to RJ-45 Mode. The complete kit includes: 860 DSPi Meter, Protective Carrying Case, Shoulder Strap, US AC Power Cable and AC to DC Power Adapter & Battery Charger. Configured with: Power Pack (PP-1), Return Tester RSVP (VP-1), QAM (QA-2), Vestigial Side Band Modulation (VSB), Forward Sweep (FS-1), Vertical Interval Test Signals (VITS), Frequency Domain Reflectometer (FDR-1) and Return Transmitter Board (RTB) Options
860 DSPi Field Analyzer

860 DSPi - US (PP-1, SR-1, VP-1, QA-2, VSB, FS-1, VITS, FDR-1 & RTB)

Configured with options

The 860 DSPi is a handheld spectrum analyzer with US DOCSIS 3.0 (8x4) modem that provides all of the testing power needed to ensure HFC networks operate to high standards. This includes balancing of the distribution system, maintaining analog and digital signal quality and controlling return path ingress. Standard Testing Features: 6 MHz Channel Spacing, Return Spectrum Analysis (4 to 65 MHz), Forward Spectrum Analysis (4 to 1000 MHz), Level Measurement, C/N Measurement, QAM Measurement (Level/MER/BER), Channel Plan Scan with Tilt Measurement, Ping, Trace Route, VoIP, Throughput, Cable Modem Statistics, Analog HUM, Depth of Modulation, CSO/CTB, FM Deviation, Sweepless Sweep, Line Viewer and QAM Source. Standard Communication Features: RF Test Port (F-Type, Replaceable), US DOCSIS 3.0 Modem 8x4 (100/304 MBPS), RJ45 Electrical Ethernet Port (10/100MBPS), CM to RJ-45 Mode. The complete kit includes: 860 DSPi Meter, Protective Carrying Case, Shoulder Strap, US AC Power Cable and AC to DC Power Adapter & Battery Charger. Configured with: Power Pack (PP-1), Return Sweep Receiver (SR-1), Return Tester RSVP (VP-1), QAM (QA-2), Vestigial Side Band Modulation (VSB), Forward Sweep (FS-1), Vertical Interval Test Signals (VITS), Frequency Domain Reflectometer (FDR-1) and Return Transmitter Board (RTB) Options
860 DSPi Field Analyzer

860 DSPi - US (PP-1, SA-1, QA-2, VSB, FS-1, VITS, FDR-1 & RTB)

Configured with options

The 860 DSPi is a handheld spectrum analyzer with US DOCSIS 3.0 (8x4) modem that provides all of the testing power needed to ensure HFC networks operate to high standards. This includes balancing of the distribution system, maintaining analog and digital signal quality and controlling return path ingress. Standard Testing Features: 6 MHz Channel Spacing, Return Spectrum Analysis (4 to 65 MHz), Forward Spectrum Analysis (4 to 1000 MHz), Level Measurement, C/N Measurement, QAM Measurement (Level/MER/BER), Channel Plan Scan with Tilt Measurement, Ping, Trace Route, VoIP, Throughput, Cable Modem Statistics, Analog HUM, Depth of Modulation, CSO/CTB, FM Deviation, Sweepless Sweep, Line Viewer and QAM Source. Standard Communication Features: RF Test Port (F-Type, Replaceable), US DOCSIS 3.0 Modem 8x4 (100/304 MBPS), RJ45 Electrical Ethernet Port (10/100MBPS), CM to RJ-45 Mode. The complete kit includes: 860 DSPi Meter, Protective Carrying Case, Shoulder Strap, US AC Power Cable and AC to DC Power Adapter & Battery Charger. Configured with: Power Pack (PP-1), Spectrum Analyzer (SA-1), QAM (QA-2), Vestigial Side Band Modulation (VSB), Forward Sweep (FS-1), Vertical Interval Test Signals (VITS), Frequency Domain Reflectometer (FDR-1) and Return Transmitter Board (RTB) Options
860 DSPi Field Analyzer

860 DSPi - US (PP-1, SR-1, SA-1, QA-2, VSB, FS-1, VITS, FDR-1 & RTB)

Configured with options

The 860 DSPi is a handheld spectrum analyzer with US DOCSIS 3.0 (8x4) modem that provides all of the testing power needed to ensure HFC networks operate to high standards. This includes balancing of the distribution system, maintaining analog and digital signal quality and controlling return path ingress. Standard Testing Features: 6 MHz Channel Spacing, Return Spectrum Analysis (4 to 65 MHz), Forward Spectrum Analysis (4 to 1000 MHz), Level Measurement, C/N Measurement, QAM Measurement (Level/MER/BER), Channel Plan Scan with Tilt Measurement, Ping, Trace Route, VoIP, Throughput, Cable Modem Statistics, Analog HUM, Depth of Modulation, CSO/CTB, FM Deviation, Sweepless Sweep, Line Viewer and QAM Source. Standard Communication Features: RF Test Port (F-Type, Replaceable), US DOCSIS 3.0 Modem 8x4 (100/304 MBPS), RJ45 Electrical Ethernet Port (10/100MBPS), CM to RJ-45 Mode. The complete kit includes: 860 DSPi Meter, Protective Carrying Case, Shoulder Strap, US AC Power Cable and AC to DC Power Adapter & Battery Charger. Configured with: Power Pack (PP-1), Return Sweep Receiver (SR-1), Spectrum Analyzer (SA-1), QAM (QA-2), Vestigial Side Band Modulation (VSB), Forward Sweep (FS-1), Vertical Interval Test Signals (VITS), Frequency Domain Reflectometer (FDR-1) and Return Transmitter Board (RTB) Options
860 DSPi Field Analyzer

860 DSPi - US (PP-1, VP-1, SA-1, QA-2, VSB, FS-1, VITS, FDR-1 & RTB)

Configured with options

The 860 DSPi is a handheld spectrum analyzer with US DOCSIS 3.0 (8x4) modem that provides all of the testing power needed to ensure HFC networks operate to high standards. This includes balancing of the distribution system, maintaining analog and digital signal quality and controlling return path ingress. Standard Testing Features: 6 MHz Channel Spacing, Return Spectrum Analysis (4 to 65 MHz), Forward Spectrum Analysis (4 to 1000 MHz), Level Measurement, C/N Measurement, QAM Measurement (Level/MER/BER), Channel Plan Scan with Tilt Measurement, Ping, Trace Route, VoIP, Throughput, Cable Modem Statistics, Analog HUM, Depth of Modulation, CSO/CTB, FM Deviation, Sweepless Sweep, Line Viewer and QAM Source. Standard Communication Features: RF Test Port (F-Type, Replaceable), US DOCSIS 3.0 Modem 8x4 (100/304 MBPS), RJ45 Electrical Ethernet Port (10/100MBPS), CM to RJ-45 Mode. The complete kit includes: 860 DSPi Meter, Protective Carrying Case, Shoulder Strap, US AC Power Cable and AC to DC Power Adapter & Battery Charger. Configured with: Power Pack (PP-1), Return Tester RSVP (VP-1), Spectrum Analyzer (SA-1), QAM (QA-2), Vestigial Side Band Modulation (VSB), Forward Sweep (FS-1), Vertical Interval Test Signals (VITS), Frequency Domain Reflectometer (FDR-1) and Return Transmitter Board (RTB) Options
860 DSPi Field Analyzer

860 DSPi - US (PP-1, SR-1, VP-1, SA-1, QA-2, VSB, FS-1, VITS, FDR-1 & RTB)

Configured with options

The 860 DSPi is a handheld spectrum analyzer with US DOCSIS 3.0 (8x4) modem that provides all of the testing power needed to ensure HFC networks operate to high standards. This includes balancing of the distribution system, maintaining analog and digital signal quality and controlling return path ingress. Standard Testing Features: 6 MHz Channel Spacing, Return Spectrum Analysis (4 to 65 MHz), Forward Spectrum Analysis (4 to 1000 MHz), Level Measurement, C/N Measurement, QAM Measurement (Level/MER/BER), Channel Plan Scan with Tilt Measurement, Ping, Trace Route, VoIP, Throughput, Cable Modem Statistics, Analog HUM, Depth of Modulation, CSO/CTB, FM Deviation, Sweepless Sweep, Line Viewer and QAM Source. Standard Communication Features: RF Test Port (F-Type, Replaceable), US DOCSIS 3.0 Modem 8x4 (100/304 MBPS), RJ45 Electrical Ethernet Port (10/100MBPS), CM to RJ-45 Mode. The complete kit includes: 860 DSPi Meter, Protective Carrying Case, Shoulder Strap, US AC Power Cable and AC to DC Power Adapter & Battery Charger. Configured with: Power Pack (PP-1), Return Sweep Receiver (SR-1), Return Tester RSVP (VP-1), Spectrum Analyzer (SA-1), QAM (QA-2), Vestigial Side Band Modulation (VSB), Forward Sweep (FS-1), Vertical Interval Test Signals (VITS), Frequency Domain Reflectometer (FDR-1) and Return Transmitter Board (RTB) Options
860 DSPi Field Analyzer

860 DSPi - US (PP-1, TC-1, FDR-1 & RTB)

Configured with options

The 860 DSPi is a handheld spectrum analyzer with US DOCSIS 3.0 (8x4) modem that provides all of the testing power needed to ensure HFC networks operate to high standards. This includes balancing of the distribution system, maintaining analog and digital signal quality and controlling return path ingress. Standard Testing Features: 6 MHz Channel Spacing, Return Spectrum Analysis (4 to 65 MHz), Forward Spectrum Analysis (4 to 1000 MHz), Level Measurement, C/N Measurement, QAM Measurement (Level/MER/BER), Channel Plan Scan with Tilt Measurement, Ping, Trace Route, VoIP, Throughput, Cable Modem Statistics, Analog HUM, Depth of Modulation, CSO/CTB, FM Deviation, Sweepless Sweep, Line Viewer and QAM Source. Standard Communication Features: RF Test Port (F-Type, Replaceable), US DOCSIS 3.0 Modem 8x4 (100/304 MBPS), RJ45 Electrical Ethernet Port (10/100MBPS), CM to RJ-45 Mode. The complete kit includes: 860 DSPi Meter, Protective Carrying Case, Shoulder Strap, US AC Power Cable and AC to DC Power Adapter & Battery Charger. Configured with: Power Pack (PP-1), TraffiControl (TC-1), Frequency Domain Reflectometer (FDR-1) and Return Transmitter Board (RTB) Options
860 DSPi Field Analyzer

860 DSPi - US (PP-1, SR-1, TC-1, FDR-1 & RTB)

Configured with options

The 860 DSPi is a handheld spectrum analyzer with US DOCSIS 3.0 (8x4) modem that provides all of the testing power needed to ensure HFC networks operate to high standards. This includes balancing of the distribution system, maintaining analog and digital signal quality and controlling return path ingress. Standard Testing Features: 6 MHz Channel Spacing, Return Spectrum Analysis (4 to 65 MHz), Forward Spectrum Analysis (4 to 1000 MHz), Level Measurement, C/N Measurement, QAM Measurement (Level/MER/BER), Channel Plan Scan with Tilt Measurement, Ping, Trace Route, VoIP, Throughput, Cable Modem Statistics, Analog HUM, Depth of Modulation, CSO/CTB, FM Deviation, Sweepless Sweep, Line Viewer and QAM Source. Standard Communication Features: RF Test Port (F-Type, Replaceable), US DOCSIS 3.0 Modem 8x4 (100/304 MBPS), RJ45 Electrical Ethernet Port (10/100MBPS), CM to RJ-45 Mode. The complete kit includes: 860 DSPi Meter, Protective Carrying Case, Shoulder Strap, US AC Power Cable and AC to DC Power Adapter & Battery Charger. Configured with: Power Pack (PP-1), Return Sweep Receiver (SR-1), TraffiControl (TC-1), Frequency Domain Reflectometer (FDR-1) and Return Transmitter Board (RTB) Options
860 DSPi Field Analyzer

860 DSPi - US (PP-1, VP-1, TC-1, FDR-1 & RTB)

Configured with options

The 860 DSPi is a handheld spectrum analyzer with US DOCSIS 3.0 (8x4) modem that provides all of the testing power needed to ensure HFC networks operate to high standards. This includes balancing of the distribution system, maintaining analog and digital signal quality and controlling return path ingress. Standard Testing Features: 6 MHz Channel Spacing, Return Spectrum Analysis (4 to 65 MHz), Forward Spectrum Analysis (4 to 1000 MHz), Level Measurement, C/N Measurement, QAM Measurement (Level/MER/BER), Channel Plan Scan with Tilt Measurement, Ping, Trace Route, VoIP, Throughput, Cable Modem Statistics, Analog HUM, Depth of Modulation, CSO/CTB, FM Deviation, Sweepless Sweep, Line Viewer and QAM Source. Standard Communication Features: RF Test Port (F-Type, Replaceable), US DOCSIS 3.0 Modem 8x4 (100/304 MBPS), RJ45 Electrical Ethernet Port (10/100MBPS), CM to RJ-45 Mode. The complete kit includes: 860 DSPi Meter, Protective Carrying Case, Shoulder Strap, US AC Power Cable and AC to DC Power Adapter & Battery Charger. Configured with: Power Pack (PP-1), Return Tester RSVP (VP-1), TraffiControl (TC-1), Frequency Domain Reflectometer (FDR-1) and Return Transmitter Board (RTB) Options
860 DSPi Field Analyzer

860 DSPi - US (PP-1, SR-1, VP-1, TC-1, FDR-1 & RTB)

Configured with options

The 860 DSPi is a handheld spectrum analyzer with US DOCSIS 3.0 (8x4) modem that provides all of the testing power needed to ensure HFC networks operate to high standards. This includes balancing of the distribution system, maintaining analog and digital signal quality and controlling return path ingress. Standard Testing Features: 6 MHz Channel Spacing, Return Spectrum Analysis (4 to 65 MHz), Forward Spectrum Analysis (4 to 1000 MHz), Level Measurement, C/N Measurement, QAM Measurement (Level/MER/BER), Channel Plan Scan with Tilt Measurement, Ping, Trace Route, VoIP, Throughput, Cable Modem Statistics, Analog HUM, Depth of Modulation, CSO/CTB, FM Deviation, Sweepless Sweep, Line Viewer and QAM Source. Standard Communication Features: RF Test Port (F-Type, Replaceable), US DOCSIS 3.0 Modem 8x4 (100/304 MBPS), RJ45 Electrical Ethernet Port (10/100MBPS), CM to RJ-45 Mode. The complete kit includes: 860 DSPi Meter, Protective Carrying Case, Shoulder Strap, US AC Power Cable and AC to DC Power Adapter & Battery Charger. Configured with: Power Pack (PP-1), Return Sweep Receiver (SR-1), Return Tester RSVP (VP-1), TraffiControl (TC-1), Frequency Domain Reflectometer (FDR-1) and Return Transmitter Board (RTB) Options
860 DSPi Field Analyzer

860 DSPi - US (PP-1, SA-1, TC-1, FDR-1 & RTB)

Configured with options

The 860 DSPi is a handheld spectrum analyzer with US DOCSIS 3.0 (8x4) modem that provides all of the testing power needed to ensure HFC networks operate to high standards. This includes balancing of the distribution system, maintaining analog and digital signal quality and controlling return path ingress. Standard Testing Features: 6 MHz Channel Spacing, Return Spectrum Analysis (4 to 65 MHz), Forward Spectrum Analysis (4 to 1000 MHz), Level Measurement, C/N Measurement, QAM Measurement (Level/MER/BER), Channel Plan Scan with Tilt Measurement, Ping, Trace Route, VoIP, Throughput, Cable Modem Statistics, Analog HUM, Depth of Modulation, CSO/CTB, FM Deviation, Sweepless Sweep, Line Viewer and QAM Source. Standard Communication Features: RF Test Port (F-Type, Replaceable), US DOCSIS 3.0 Modem 8x4 (100/304 MBPS), RJ45 Electrical Ethernet Port (10/100MBPS), CM to RJ-45 Mode. The complete kit includes: 860 DSPi Meter, Protective Carrying Case, Shoulder Strap, US AC Power Cable and AC to DC Power Adapter & Battery Charger. Configured with: Power Pack (PP-1), Spectrum Analyzer (SA-1), TraffiControl (TC-1), Frequency Domain Reflectometer (FDR-1) and Return Transmitter Board (RTB) Options
860 DSPi Field Analyzer

860 DSPi - US (PP-1, SR-1, SA-1, TC-1, FDR-1 & RTB)

Configured with options

The 860 DSPi is a handheld spectrum analyzer with US DOCSIS 3.0 (8x4) modem that provides all of the testing power needed to ensure HFC networks operate to high standards. This includes balancing of the distribution system, maintaining analog and digital signal quality and controlling return path ingress. Standard Testing Features: 6 MHz Channel Spacing, Return Spectrum Analysis (4 to 65 MHz), Forward Spectrum Analysis (4 to 1000 MHz), Level Measurement, C/N Measurement, QAM Measurement (Level/MER/BER), Channel Plan Scan with Tilt Measurement, Ping, Trace Route, VoIP, Throughput, Cable Modem Statistics, Analog HUM, Depth of Modulation, CSO/CTB, FM Deviation, Sweepless Sweep, Line Viewer and QAM Source. Standard Communication Features: RF Test Port (F-Type, Replaceable), US DOCSIS 3.0 Modem 8x4 (100/304 MBPS), RJ45 Electrical Ethernet Port (10/100MBPS), CM to RJ-45 Mode. The complete kit includes: 860 DSPi Meter, Protective Carrying Case, Shoulder Strap, US AC Power Cable and AC to DC Power Adapter & Battery Charger. Configured with: Power Pack (PP-1), Return Sweep Receiver (SR-1), Spectrum Analyzer (SA-1), TraffiControl (TC-1), Frequency Domain Reflectometer (FDR-1) and Return Transmitter Board (RTB) Options
860 DSPi Field Analyzer

860 DSPi - US (PP-1, VP-1, SA-1, TC-1, FDR-1 & RTB)

Configured with options

The 860 DSPi is a handheld spectrum analyzer with US DOCSIS 3.0 (8x4) modem that provides all of the testing power needed to ensure HFC networks operate to high standards. This includes balancing of the distribution system, maintaining analog and digital signal quality and controlling return path ingress. Standard Testing Features: 6 MHz Channel Spacing, Return Spectrum Analysis (4 to 65 MHz), Forward Spectrum Analysis (4 to 1000 MHz), Level Measurement, C/N Measurement, QAM Measurement (Level/MER/BER), Channel Plan Scan with Tilt Measurement, Ping, Trace Route, VoIP, Throughput, Cable Modem Statistics, Analog HUM, Depth of Modulation, CSO/CTB, FM Deviation, Sweepless Sweep, Line Viewer and QAM Source. Standard Communication Features: RF Test Port (F-Type, Replaceable), US DOCSIS 3.0 Modem 8x4 (100/304 MBPS), RJ45 Electrical Ethernet Port (10/100MBPS), CM to RJ-45 Mode. The complete kit includes: 860 DSPi Meter, Protective Carrying Case, Shoulder Strap, US AC Power Cable and AC to DC Power Adapter & Battery Charger. Configured with: Power Pack (PP-1), Return Tester RSVP (VP-1), Spectrum Analyzer (SA-1), TraffiControl (TC-1), Frequency Domain Reflectometer (FDR-1) and Return Transmitter Board (RTB) Options
860 DSPi Field Analyzer

860 DSPi - US (PP-1, SR-1, VP-1, SA-1, TC-1, FDR-1 & RTB)

Configured with options

The 860 DSPi is a handheld spectrum analyzer with US DOCSIS 3.0 (8x4) modem that provides all of the testing power needed to ensure HFC networks operate to high standards. This includes balancing of the distribution system, maintaining analog and digital signal quality and controlling return path ingress. Standard Testing Features: 6 MHz Channel Spacing, Return Spectrum Analysis (4 to 65 MHz), Forward Spectrum Analysis (4 to 1000 MHz), Level Measurement, C/N Measurement, QAM Measurement (Level/MER/BER), Channel Plan Scan with Tilt Measurement, Ping, Trace Route, VoIP, Throughput, Cable Modem Statistics, Analog HUM, Depth of Modulation, CSO/CTB, FM Deviation, Sweepless Sweep, Line Viewer and QAM Source. Standard Communication Features: RF Test Port (F-Type, Replaceable), US DOCSIS 3.0 Modem 8x4 (100/304 MBPS), RJ45 Electrical Ethernet Port (10/100MBPS), CM to RJ-45 Mode. The complete kit includes: 860 DSPi Meter, Protective Carrying Case, Shoulder Strap, US AC Power Cable and AC to DC Power Adapter & Battery Charger. Configured with: Power Pack (PP-1), Return Sweep Receiver (SR-1), Return Tester RSVP (VP-1), Spectrum Analyzer (SA-1), TraffiControl (TC-1), Frequency Domain Reflectometer (FDR-1) and Return Transmitter Board (RTB) Options
860 DSPi Field Analyzer

860 DSPi - US (PP-1, QA-2, TC-1, FDR-1 & RTB)

Configured with options

The 860 DSPi is a handheld spectrum analyzer with US DOCSIS 3.0 (8x4) modem that provides all of the testing power needed to ensure HFC networks operate to high standards. This includes balancing of the distribution system, maintaining analog and digital signal quality and controlling return path ingress. Standard Testing Features: 6 MHz Channel Spacing, Return Spectrum Analysis (4 to 65 MHz), Forward Spectrum Analysis (4 to 1000 MHz), Level Measurement, C/N Measurement, QAM Measurement (Level/MER/BER), Channel Plan Scan with Tilt Measurement, Ping, Trace Route, VoIP, Throughput, Cable Modem Statistics, Analog HUM, Depth of Modulation, CSO/CTB, FM Deviation, Sweepless Sweep, Line Viewer and QAM Source. Standard Communication Features: RF Test Port (F-Type, Replaceable), US DOCSIS 3.0 Modem 8x4 (100/304 MBPS), RJ45 Electrical Ethernet Port (10/100MBPS), CM to RJ-45 Mode. The complete kit includes: 860 DSPi Meter, Protective Carrying Case, Shoulder Strap, US AC Power Cable and AC to DC Power Adapter & Battery Charger. Configured with: Power Pack (PP-1), QAM (QA-2), TraffiControl (TC-1), Frequency Domain Reflectometer (FDR-1) and Return Transmitter Board (RTB) Options
860 DSPi Field Analyzer

860 DSPi - US (PP-1, SR-1, QA-2, TC-1, FDR-1 & RTB)

Configured with options

The 860 DSPi is a handheld spectrum analyzer with US DOCSIS 3.0 (8x4) modem that provides all of the testing power needed to ensure HFC networks operate to high standards. This includes balancing of the distribution system, maintaining analog and digital signal quality and controlling return path ingress. Standard Testing Features: 6 MHz Channel Spacing, Return Spectrum Analysis (4 to 65 MHz), Forward Spectrum Analysis (4 to 1000 MHz), Level Measurement, C/N Measurement, QAM Measurement (Level/MER/BER), Channel Plan Scan with Tilt Measurement, Ping, Trace Route, VoIP, Throughput, Cable Modem Statistics, Analog HUM, Depth of Modulation, CSO/CTB, FM Deviation, Sweepless Sweep, Line Viewer and QAM Source. Standard Communication Features: RF Test Port (F-Type, Replaceable), US DOCSIS 3.0 Modem 8x4 (100/304 MBPS), RJ45 Electrical Ethernet Port (10/100MBPS), CM to RJ-45 Mode. The complete kit includes: 860 DSPi Meter, Protective Carrying Case, Shoulder Strap, US AC Power Cable and AC to DC Power Adapter & Battery Charger. Configured with: Power Pack (PP-1), Return Sweep Receiver (SR-1), QAM (QA-2), TraffiControl (TC-1), Frequency Domain Reflectometer (FDR-1) and Return Transmitter Board (RTB) Options
860 DSPi Field Analyzer

860 DSPi - US (PP-1, VP-1, QA-2, TC-1, FDR-1 & RTB)

Configured with options

The 860 DSPi is a handheld spectrum analyzer with US DOCSIS 3.0 (8x4) modem that provides all of the testing power needed to ensure HFC networks operate to high standards. This includes balancing of the distribution system, maintaining analog and digital signal quality and controlling return path ingress. Standard Testing Features: 6 MHz Channel Spacing, Return Spectrum Analysis (4 to 65 MHz), Forward Spectrum Analysis (4 to 1000 MHz), Level Measurement, C/N Measurement, QAM Measurement (Level/MER/BER), Channel Plan Scan with Tilt Measurement, Ping, Trace Route, VoIP, Throughput, Cable Modem Statistics, Analog HUM, Depth of Modulation, CSO/CTB, FM Deviation, Sweepless Sweep, Line Viewer and QAM Source. Standard Communication Features: RF Test Port (F-Type, Replaceable), US DOCSIS 3.0 Modem 8x4 (100/304 MBPS), RJ45 Electrical Ethernet Port (10/100MBPS), CM to RJ-45 Mode. The complete kit includes: 860 DSPi Meter, Protective Carrying Case, Shoulder Strap, US AC Power Cable and AC to DC Power Adapter & Battery Charger. Configured with: Power Pack (PP-1), Return Tester RSVP (VP-1), QAM (QA-2), TraffiControl (TC-1), Frequency Domain Reflectometer (FDR-1) and Return Transmitter Board (RTB) Options
860 DSPi Field Analyzer

860 DSPi - US (PP-1, SR-1, VP-1, QA-2, TC-1, FDR-1 & RTB)

Configured with options

The 860 DSPi is a handheld spectrum analyzer with US DOCSIS 3.0 (8x4) modem that provides all of the testing power needed to ensure HFC networks operate to high standards. This includes balancing of the distribution system, maintaining analog and digital signal quality and controlling return path ingress. Standard Testing Features: 6 MHz Channel Spacing, Return Spectrum Analysis (4 to 65 MHz), Forward Spectrum Analysis (4 to 1000 MHz), Level Measurement, C/N Measurement, QAM Measurement (Level/MER/BER), Channel Plan Scan with Tilt Measurement, Ping, Trace Route, VoIP, Throughput, Cable Modem Statistics, Analog HUM, Depth of Modulation, CSO/CTB, FM Deviation, Sweepless Sweep, Line Viewer and QAM Source. Standard Communication Features: RF Test Port (F-Type, Replaceable), US DOCSIS 3.0 Modem 8x4 (100/304 MBPS), RJ45 Electrical Ethernet Port (10/100MBPS), CM to RJ-45 Mode. The complete kit includes: 860 DSPi Meter, Protective Carrying Case, Shoulder Strap, US AC Power Cable and AC to DC Power Adapter & Battery Charger. Configured with: Power Pack (PP-1), Return Sweep Receiver (SR-1), Return Tester RSVP (VP-1), QAM (QA-2), TraffiControl (TC-1), Frequency Domain Reflectometer (FDR-1) and Return Transmitter Board (RTB) Options
860 DSPi Field Analyzer

860 DSPi - US (PP-1, SA-1, QA-2, TC-1, FDR-1 & RTB)

Configured with options

The 860 DSPi is a handheld spectrum analyzer with US DOCSIS 3.0 (8x4) modem that provides all of the testing power needed to ensure HFC networks operate to high standards. This includes balancing of the distribution system, maintaining analog and digital signal quality and controlling return path ingress. Standard Testing Features: 6 MHz Channel Spacing, Return Spectrum Analysis (4 to 65 MHz), Forward Spectrum Analysis (4 to 1000 MHz), Level Measurement, C/N Measurement, QAM Measurement (Level/MER/BER), Channel Plan Scan with Tilt Measurement, Ping, Trace Route, VoIP, Throughput, Cable Modem Statistics, Analog HUM, Depth of Modulation, CSO/CTB, FM Deviation, Sweepless Sweep, Line Viewer and QAM Source. Standard Communication Features: RF Test Port (F-Type, Replaceable), US DOCSIS 3.0 Modem 8x4 (100/304 MBPS), RJ45 Electrical Ethernet Port (10/100MBPS), CM to RJ-45 Mode. The complete kit includes: 860 DSPi Meter, Protective Carrying Case, Shoulder Strap, US AC Power Cable and AC to DC Power Adapter & Battery Charger. Configured with: Power Pack (PP-1), Spectrum Analyzer (SA-1), QAM (QA-2), TraffiControl (TC-1), Frequency Domain Reflectometer (FDR-1) and Return Transmitter Board (RTB) Options
860 DSPi Field Analyzer

860 DSPi - US (PP-1, SR-1, SA-1, QA-2, TC-1, FDR-1 & RTB)

Configured with options

The 860 DSPi is a handheld spectrum analyzer with US DOCSIS 3.0 (8x4) modem that provides all of the testing power needed to ensure HFC networks operate to high standards. This includes balancing of the distribution system, maintaining analog and digital signal quality and controlling return path ingress. Standard Testing Features: 6 MHz Channel Spacing, Return Spectrum Analysis (4 to 65 MHz), Forward Spectrum Analysis (4 to 1000 MHz), Level Measurement, C/N Measurement, QAM Measurement (Level/MER/BER), Channel Plan Scan with Tilt Measurement, Ping, Trace Route, VoIP, Throughput, Cable Modem Statistics, Analog HUM, Depth of Modulation, CSO/CTB, FM Deviation, Sweepless Sweep, Line Viewer and QAM Source. Standard Communication Features: RF Test Port (F-Type, Replaceable), US DOCSIS 3.0 Modem 8x4 (100/304 MBPS), RJ45 Electrical Ethernet Port (10/100MBPS), CM to RJ-45 Mode. The complete kit includes: 860 DSPi Meter, Protective Carrying Case, Shoulder Strap, US AC Power Cable and AC to DC Power Adapter & Battery Charger. Configured with: Power Pack (PP-1), Return Sweep Receiver (SR-1), Spectrum Analyzer (SA-1), QAM (QA-2), TraffiControl (TC-1), Frequency Domain Reflectometer (FDR-1) and Return Transmitter Board (RTB) Options
860 DSPi Field Analyzer

860 DSPi - US (PP-1, VP-1, SA-1, QA-2, TC-1, FDR-1 & RTB)

Configured with options

The 860 DSPi is a handheld spectrum analyzer with US DOCSIS 3.0 (8x4) modem that provides all of the testing power needed to ensure HFC networks operate to high standards. This includes balancing of the distribution system, maintaining analog and digital signal quality and controlling return path ingress. Standard Testing Features: 6 MHz Channel Spacing, Return Spectrum Analysis (4 to 65 MHz), Forward Spectrum Analysis (4 to 1000 MHz), Level Measurement, C/N Measurement, QAM Measurement (Level/MER/BER), Channel Plan Scan with Tilt Measurement, Ping, Trace Route, VoIP, Throughput, Cable Modem Statistics, Analog HUM, Depth of Modulation, CSO/CTB, FM Deviation, Sweepless Sweep, Line Viewer and QAM Source. Standard Communication Features: RF Test Port (F-Type, Replaceable), US DOCSIS 3.0 Modem 8x4 (100/304 MBPS), RJ45 Electrical Ethernet Port (10/100MBPS), CM to RJ-45 Mode. The complete kit includes: 860 DSPi Meter, Protective Carrying Case, Shoulder Strap, US AC Power Cable and AC to DC Power Adapter & Battery Charger. Configured with: Power Pack (PP-1), Return Tester RSVP (VP-1), Spectrum Analyzer (SA-1), QAM (QA-2), TraffiControl (TC-1), Frequency Domain Reflectometer (FDR-1) and Return Transmitter Board (RTB) Options
860 DSPi Field Analyzer

860 DSPi - US (PP-1, SR-1, VP-1, SA-1, QA-2, TC-1, FDR-1 & RTB)

Configured with options

The 860 DSPi is a handheld spectrum analyzer with US DOCSIS 3.0 (8x4) modem that provides all of the testing power needed to ensure HFC networks operate to high standards. This includes balancing of the distribution system, maintaining analog and digital signal quality and controlling return path ingress. Standard Testing Features: 6 MHz Channel Spacing, Return Spectrum Analysis (4 to 65 MHz), Forward Spectrum Analysis (4 to 1000 MHz), Level Measurement, C/N Measurement, QAM Measurement (Level/MER/BER), Channel Plan Scan with Tilt Measurement, Ping, Trace Route, VoIP, Throughput, Cable Modem Statistics, Analog HUM, Depth of Modulation, CSO/CTB, FM Deviation, Sweepless Sweep, Line Viewer and QAM Source. Standard Communication Features: RF Test Port (F-Type, Replaceable), US DOCSIS 3.0 Modem 8x4 (100/304 MBPS), RJ45 Electrical Ethernet Port (10/100MBPS), CM to RJ-45 Mode. The complete kit includes: 860 DSPi Meter, Protective Carrying Case, Shoulder Strap, US AC Power Cable and AC to DC Power Adapter & Battery Charger. Configured with: Power Pack (PP-1), Return Sweep Receiver (SR-1), Return Tester RSVP (VP-1), Spectrum Analyzer (SA-1), QAM (QA-2), TraffiControl (TC-1), Frequency Domain Reflectometer (FDR-1) and Return Transmitter Board (RTB) Options
860 DSPi Field Analyzer

860 DSPi - US (PP-1, VSB, TC-1, FDR-1 & RTB)

Configured with options

The 860 DSPi is a handheld spectrum analyzer with US DOCSIS 3.0 (8x4) modem that provides all of the testing power needed to ensure HFC networks operate to high standards. This includes balancing of the distribution system, maintaining analog and digital signal quality and controlling return path ingress. Standard Testing Features: 6 MHz Channel Spacing, Return Spectrum Analysis (4 to 65 MHz), Forward Spectrum Analysis (4 to 1000 MHz), Level Measurement, C/N Measurement, QAM Measurement (Level/MER/BER), Channel Plan Scan with Tilt Measurement, Ping, Trace Route, VoIP, Throughput, Cable Modem Statistics, Analog HUM, Depth of Modulation, CSO/CTB, FM Deviation, Sweepless Sweep, Line Viewer and QAM Source. Standard Communication Features: RF Test Port (F-Type, Replaceable), US DOCSIS 3.0 Modem 8x4 (100/304 MBPS), RJ45 Electrical Ethernet Port (10/100MBPS), CM to RJ-45 Mode. The complete kit includes: 860 DSPi Meter, Protective Carrying Case, Shoulder Strap, US AC Power Cable and AC to DC Power Adapter & Battery Charger. Configured with: Power Pack (PP-1), Vestigial Side Band Modulation (VSB), TraffiControl (TC-1), Frequency Domain Reflectometer (FDR-1) and Return Transmitter Board (RTB) Options
860 DSPi Field Analyzer

860 DSPi - US (PP-1, SR-1, VSB, TC-1, FDR-1 & RTB)

Configured with options

The 860 DSPi is a handheld spectrum analyzer with US DOCSIS 3.0 (8x4) modem that provides all of the testing power needed to ensure HFC networks operate to high standards. This includes balancing of the distribution system, maintaining analog and digital signal quality and controlling return path ingress. Standard Testing Features: 6 MHz Channel Spacing, Return Spectrum Analysis (4 to 65 MHz), Forward Spectrum Analysis (4 to 1000 MHz), Level Measurement, C/N Measurement, QAM Measurement (Level/MER/BER), Channel Plan Scan with Tilt Measurement, Ping, Trace Route, VoIP, Throughput, Cable Modem Statistics, Analog HUM, Depth of Modulation, CSO/CTB, FM Deviation, Sweepless Sweep, Line Viewer and QAM Source. Standard Communication Features: RF Test Port (F-Type, Replaceable), US DOCSIS 3.0 Modem 8x4 (100/304 MBPS), RJ45 Electrical Ethernet Port (10/100MBPS), CM to RJ-45 Mode. The complete kit includes: 860 DSPi Meter, Protective Carrying Case, Shoulder Strap, US AC Power Cable and AC to DC Power Adapter & Battery Charger. Configured with: Power Pack (PP-1), Return Sweep Receiver (SR-1), Vestigial Side Band Modulation (VSB), TraffiControl (TC-1), Frequency Domain Reflectometer (FDR-1) and Return Transmitter Board (RTB) Options
860 DSPi Field Analyzer

860 DSPi - US (PP-1, VP-1, VSB, TC-1, FDR-1 & RTB)

Configured with options

The 860 DSPi is a handheld spectrum analyzer with US DOCSIS 3.0 (8x4) modem that provides all of the testing power needed to ensure HFC networks operate to high standards. This includes balancing of the distribution system, maintaining analog and digital signal quality and controlling return path ingress. Standard Testing Features: 6 MHz Channel Spacing, Return Spectrum Analysis (4 to 65 MHz), Forward Spectrum Analysis (4 to 1000 MHz), Level Measurement, C/N Measurement, QAM Measurement (Level/MER/BER), Channel Plan Scan with Tilt Measurement, Ping, Trace Route, VoIP, Throughput, Cable Modem Statistics, Analog HUM, Depth of Modulation, CSO/CTB, FM Deviation, Sweepless Sweep, Line Viewer and QAM Source. Standard Communication Features: RF Test Port (F-Type, Replaceable), US DOCSIS 3.0 Modem 8x4 (100/304 MBPS), RJ45 Electrical Ethernet Port (10/100MBPS), CM to RJ-45 Mode. The complete kit includes: 860 DSPi Meter, Protective Carrying Case, Shoulder Strap, US AC Power Cable and AC to DC Power Adapter & Battery Charger. Configured with: Power Pack (PP-1), Return Tester RSVP (VP-1), Vestigial Side Band Modulation (VSB), TraffiControl (TC-1), Frequency Domain Reflectometer (FDR-1) and Return Transmitter Board (RTB) Options
860 DSPi Field Analyzer

860 DSPi - US (PP-1, SR-1, VP-1, VSB, TC-1, FDR-1 & RTB)

Configured with options

The 860 DSPi is a handheld spectrum analyzer with US DOCSIS 3.0 (8x4) modem that provides all of the testing power needed to ensure HFC networks operate to high standards. This includes balancing of the distribution system, maintaining analog and digital signal quality and controlling return path ingress. Standard Testing Features: 6 MHz Channel Spacing, Return Spectrum Analysis (4 to 65 MHz), Forward Spectrum Analysis (4 to 1000 MHz), Level Measurement, C/N Measurement, QAM Measurement (Level/MER/BER), Channel Plan Scan with Tilt Measurement, Ping, Trace Route, VoIP, Throughput, Cable Modem Statistics, Analog HUM, Depth of Modulation, CSO/CTB, FM Deviation, Sweepless Sweep, Line Viewer and QAM Source. Standard Communication Features: RF Test Port (F-Type, Replaceable), US DOCSIS 3.0 Modem 8x4 (100/304 MBPS), RJ45 Electrical Ethernet Port (10/100MBPS), CM to RJ-45 Mode. The complete kit includes: 860 DSPi Meter, Protective Carrying Case, Shoulder Strap, US AC Power Cable and AC to DC Power Adapter & Battery Charger. Configured with: Power Pack (PP-1), Return Sweep Receiver (SR-1), Return Tester RSVP (VP-1), Vestigial Side Band Modulation (VSB), TraffiControl (TC-1), Frequency Domain Reflectometer (FDR-1) and Return Transmitter Board (RTB) Options
860 DSPi Field Analyzer

860 DSPi - US (PP-1, SA-1, VSB, TC-1, FDR-1 & RTB)

Configured with options

The 860 DSPi is a handheld spectrum analyzer with US DOCSIS 3.0 (8x4) modem that provides all of the testing power needed to ensure HFC networks operate to high standards. This includes balancing of the distribution system, maintaining analog and digital signal quality and controlling return path ingress. Standard Testing Features: 6 MHz Channel Spacing, Return Spectrum Analysis (4 to 65 MHz), Forward Spectrum Analysis (4 to 1000 MHz), Level Measurement, C/N Measurement, QAM Measurement (Level/MER/BER), Channel Plan Scan with Tilt Measurement, Ping, Trace Route, VoIP, Throughput, Cable Modem Statistics, Analog HUM, Depth of Modulation, CSO/CTB, FM Deviation, Sweepless Sweep, Line Viewer and QAM Source. Standard Communication Features: RF Test Port (F-Type, Replaceable), US DOCSIS 3.0 Modem 8x4 (100/304 MBPS), RJ45 Electrical Ethernet Port (10/100MBPS), CM to RJ-45 Mode. The complete kit includes: 860 DSPi Meter, Protective Carrying Case, Shoulder Strap, US AC Power Cable and AC to DC Power Adapter & Battery Charger. Configured with: Power Pack (PP-1), Spectrum Analyzer (SA-1), Vestigial Side Band Modulation (VSB), TraffiControl (TC-1), Frequency Domain Reflectometer (FDR-1) and Return Transmitter Board (RTB) Options
860 DSPi Field Analyzer

860 DSPi - US (PP-1, SR-1, SA-1, VSB, TC-1, FDR-1 & RTB)

Configured with options

The 860 DSPi is a handheld spectrum analyzer with US DOCSIS 3.0 (8x4) modem that provides all of the testing power needed to ensure HFC networks operate to high standards. This includes balancing of the distribution system, maintaining analog and digital signal quality and controlling return path ingress. Standard Testing Features: 6 MHz Channel Spacing, Return Spectrum Analysis (4 to 65 MHz), Forward Spectrum Analysis (4 to 1000 MHz), Level Measurement, C/N Measurement, QAM Measurement (Level/MER/BER), Channel Plan Scan with Tilt Measurement, Ping, Trace Route, VoIP, Throughput, Cable Modem Statistics, Analog HUM, Depth of Modulation, CSO/CTB, FM Deviation, Sweepless Sweep, Line Viewer and QAM Source. Standard Communication Features: RF Test Port (F-Type, Replaceable), US DOCSIS 3.0 Modem 8x4 (100/304 MBPS), RJ45 Electrical Ethernet Port (10/100MBPS), CM to RJ-45 Mode. The complete kit includes: 860 DSPi Meter, Protective Carrying Case, Shoulder Strap, US AC Power Cable and AC to DC Power Adapter & Battery Charger. Configured with: Power Pack (PP-1), Return Sweep Receiver (SR-1), Spectrum Analyzer (SA-1), Vestigial Side Band Modulation (VSB), TraffiControl (TC-1), Frequency Domain Reflectometer (FDR-1) and Return Transmitter Board (RTB) Options
860 DSPi Field Analyzer

860 DSPi - US (PP-1, VP-1, SA-1, VSB, TC-1, FDR-1 & RTB)

Configured with options

The 860 DSPi is a handheld spectrum analyzer with US DOCSIS 3.0 (8x4) modem that provides all of the testing power needed to ensure HFC networks operate to high standards. This includes balancing of the distribution system, maintaining analog and digital signal quality and controlling return path ingress. Standard Testing Features: 6 MHz Channel Spacing, Return Spectrum Analysis (4 to 65 MHz), Forward Spectrum Analysis (4 to 1000 MHz), Level Measurement, C/N Measurement, QAM Measurement (Level/MER/BER), Channel Plan Scan with Tilt Measurement, Ping, Trace Route, VoIP, Throughput, Cable Modem Statistics, Analog HUM, Depth of Modulation, CSO/CTB, FM Deviation, Sweepless Sweep, Line Viewer and QAM Source. Standard Communication Features: RF Test Port (F-Type, Replaceable), US DOCSIS 3.0 Modem 8x4 (100/304 MBPS), RJ45 Electrical Ethernet Port (10/100MBPS), CM to RJ-45 Mode. The complete kit includes: 860 DSPi Meter, Protective Carrying Case, Shoulder Strap, US AC Power Cable and AC to DC Power Adapter & Battery Charger. Configured with: Power Pack (PP-1), Return Tester RSVP (VP-1), Spectrum Analyzer (SA-1), Vestigial Side Band Modulation (VSB), TraffiControl (TC-1), Frequency Domain Reflectometer (FDR-1) and Return Transmitter Board (RTB) Options
860 DSPi Field Analyzer

860 DSPi - US (PP-1, SR-1, VP-1, SA-1, VSB, TC-1, FDR-1 & RTB)

Configured with options

The 860 DSPi is a handheld spectrum analyzer with US DOCSIS 3.0 (8x4) modem that provides all of the testing power needed to ensure HFC networks operate to high standards. This includes balancing of the distribution system, maintaining analog and digital signal quality and controlling return path ingress. Standard Testing Features: 6 MHz Channel Spacing, Return Spectrum Analysis (4 to 65 MHz), Forward Spectrum Analysis (4 to 1000 MHz), Level Measurement, C/N Measurement, QAM Measurement (Level/MER/BER), Channel Plan Scan with Tilt Measurement, Ping, Trace Route, VoIP, Throughput, Cable Modem Statistics, Analog HUM, Depth of Modulation, CSO/CTB, FM Deviation, Sweepless Sweep, Line Viewer and QAM Source. Standard Communication Features: RF Test Port (F-Type, Replaceable), US DOCSIS 3.0 Modem 8x4 (100/304 MBPS), RJ45 Electrical Ethernet Port (10/100MBPS), CM to RJ-45 Mode. The complete kit includes: 860 DSPi Meter, Protective Carrying Case, Shoulder Strap, US AC Power Cable and AC to DC Power Adapter & Battery Charger. Configured with: Power Pack (PP-1), Return Sweep Receiver (SR-1), Return Tester RSVP (VP-1), Spectrum Analyzer (SA-1), Vestigial Side Band Modulation (VSB), TraffiControl (TC-1), Frequency Domain Reflectometer (FDR-1) and Return Transmitter Board (RTB) Options
860 DSPi Field Analyzer

860 DSPi - US (PP-1, QA-2, VSB, TC-1, FDR-1 & RTB)

Configured with options

The 860 DSPi is a handheld spectrum analyzer with US DOCSIS 3.0 (8x4) modem that provides all of the testing power needed to ensure HFC networks operate to high standards. This includes balancing of the distribution system, maintaining analog and digital signal quality and controlling return path ingress. Standard Testing Features: 6 MHz Channel Spacing, Return Spectrum Analysis (4 to 65 MHz), Forward Spectrum Analysis (4 to 1000 MHz), Level Measurement, C/N Measurement, QAM Measurement (Level/MER/BER), Channel Plan Scan with Tilt Measurement, Ping, Trace Route, VoIP, Throughput, Cable Modem Statistics, Analog HUM, Depth of Modulation, CSO/CTB, FM Deviation, Sweepless Sweep, Line Viewer and QAM Source. Standard Communication Features: RF Test Port (F-Type, Replaceable), US DOCSIS 3.0 Modem 8x4 (100/304 MBPS), RJ45 Electrical Ethernet Port (10/100MBPS), CM to RJ-45 Mode. The complete kit includes: 860 DSPi Meter, Protective Carrying Case, Shoulder Strap, US AC Power Cable and AC to DC Power Adapter & Battery Charger. Configured with: Power Pack (PP-1), QAM (QA-2), Vestigial Side Band Modulation (VSB), TraffiControl (TC-1), Frequency Domain Reflectometer (FDR-1) and Return Transmitter Board (RTB) Options
860 DSPi Field Analyzer

860 DSPi - US (PP-1, SR-1, QA-2, VSB, TC-1, FDR-1 & RTB)

Configured with options

The 860 DSPi is a handheld spectrum analyzer with US DOCSIS 3.0 (8x4) modem that provides all of the testing power needed to ensure HFC networks operate to high standards. This includes balancing of the distribution system, maintaining analog and digital signal quality and controlling return path ingress. Standard Testing Features: 6 MHz Channel Spacing, Return Spectrum Analysis (4 to 65 MHz), Forward Spectrum Analysis (4 to 1000 MHz), Level Measurement, C/N Measurement, QAM Measurement (Level/MER/BER), Channel Plan Scan with Tilt Measurement, Ping, Trace Route, VoIP, Throughput, Cable Modem Statistics, Analog HUM, Depth of Modulation, CSO/CTB, FM Deviation, Sweepless Sweep, Line Viewer and QAM Source. Standard Communication Features: RF Test Port (F-Type, Replaceable), US DOCSIS 3.0 Modem 8x4 (100/304 MBPS), RJ45 Electrical Ethernet Port (10/100MBPS), CM to RJ-45 Mode. The complete kit includes: 860 DSPi Meter, Protective Carrying Case, Shoulder Strap, US AC Power Cable and AC to DC Power Adapter & Battery Charger. Configured with: Power Pack (PP-1), Return Sweep Receiver (SR-1), QAM (QA-2), Vestigial Side Band Modulation (VSB), TraffiControl (TC-1), Frequency Domain Reflectometer (FDR-1) and Return Transmitter Board (RTB) Options
860 DSPi Field Analyzer

860 DSPi - US (PP-1, VP-1, QA-2, VSB, TC-1, FDR-1 & RTB)

Configured with options

The 860 DSPi is a handheld spectrum analyzer with US DOCSIS 3.0 (8x4) modem that provides all of the testing power needed to ensure HFC networks operate to high standards. This includes balancing of the distribution system, maintaining analog and digital signal quality and controlling return path ingress. Standard Testing Features: 6 MHz Channel Spacing, Return Spectrum Analysis (4 to 65 MHz), Forward Spectrum Analysis (4 to 1000 MHz), Level Measurement, C/N Measurement, QAM Measurement (Level/MER/BER), Channel Plan Scan with Tilt Measurement, Ping, Trace Route, VoIP, Throughput, Cable Modem Statistics, Analog HUM, Depth of Modulation, CSO/CTB, FM Deviation, Sweepless Sweep, Line Viewer and QAM Source. Standard Communication Features: RF Test Port (F-Type, Replaceable), US DOCSIS 3.0 Modem 8x4 (100/304 MBPS), RJ45 Electrical Ethernet Port (10/100MBPS), CM to RJ-45 Mode. The complete kit includes: 860 DSPi Meter, Protective Carrying Case, Shoulder Strap, US AC Power Cable and AC to DC Power Adapter & Battery Charger. Configured with: Power Pack (PP-1), Return Tester RSVP (VP-1), QAM (QA-2), Vestigial Side Band Modulation (VSB), TraffiControl (TC-1), Frequency Domain Reflectometer (FDR-1) and Return Transmitter Board (RTB) Options
860 DSPi Field Analyzer

860 DSPi - US (PP-1, SR-1, VP-1, QA-2, VSB, TC-1, FDR-1 & RTB)

Configured with options

The 860 DSPi is a handheld spectrum analyzer with US DOCSIS 3.0 (8x4) modem that provides all of the testing power needed to ensure HFC networks operate to high standards. This includes balancing of the distribution system, maintaining analog and digital signal quality and controlling return path ingress. Standard Testing Features: 6 MHz Channel Spacing, Return Spectrum Analysis (4 to 65 MHz), Forward Spectrum Analysis (4 to 1000 MHz), Level Measurement, C/N Measurement, QAM Measurement (Level/MER/BER), Channel Plan Scan with Tilt Measurement, Ping, Trace Route, VoIP, Throughput, Cable Modem Statistics, Analog HUM, Depth of Modulation, CSO/CTB, FM Deviation, Sweepless Sweep, Line Viewer and QAM Source. Standard Communication Features: RF Test Port (F-Type, Replaceable), US DOCSIS 3.0 Modem 8x4 (100/304 MBPS), RJ45 Electrical Ethernet Port (10/100MBPS), CM to RJ-45 Mode. The complete kit includes: 860 DSPi Meter, Protective Carrying Case, Shoulder Strap, US AC Power Cable and AC to DC Power Adapter & Battery Charger. Configured with: Power Pack (PP-1), Return Sweep Receiver (SR-1), Return Tester RSVP (VP-1), QAM (QA-2), Vestigial Side Band Modulation (VSB), TraffiControl (TC-1), Frequency Domain Reflectometer (FDR-1) and Return Transmitter Board (RTB) Options
860 DSPi Field Analyzer

860 DSPi - US (PP-1, SA-1, QA-2, VSB, TC-1, FDR-1 & RTB)

Configured with options

The 860 DSPi is a handheld spectrum analyzer with US DOCSIS 3.0 (8x4) modem that provides all of the testing power needed to ensure HFC networks operate to high standards. This includes balancing of the distribution system, maintaining analog and digital signal quality and controlling return path ingress. Standard Testing Features: 6 MHz Channel Spacing, Return Spectrum Analysis (4 to 65 MHz), Forward Spectrum Analysis (4 to 1000 MHz), Level Measurement, C/N Measurement, QAM Measurement (Level/MER/BER), Channel Plan Scan with Tilt Measurement, Ping, Trace Route, VoIP, Throughput, Cable Modem Statistics, Analog HUM, Depth of Modulation, CSO/CTB, FM Deviation, Sweepless Sweep, Line Viewer and QAM Source. Standard Communication Features: RF Test Port (F-Type, Replaceable), US DOCSIS 3.0 Modem 8x4 (100/304 MBPS), RJ45 Electrical Ethernet Port (10/100MBPS), CM to RJ-45 Mode. The complete kit includes: 860 DSPi Meter, Protective Carrying Case, Shoulder Strap, US AC Power Cable and AC to DC Power Adapter & Battery Charger. Configured with: Power Pack (PP-1), Spectrum Analyzer (SA-1), QAM (QA-2), Vestigial Side Band Modulation (VSB), TraffiControl (TC-1), Frequency Domain Reflectometer (FDR-1) and Return Transmitter Board (RTB) Options
860 DSPi Field Analyzer

860 DSPi - US (PP-1, SR-1, SA-1, QA-2, VSB, TC-1, FDR-1 & RTB)

Configured with options

The 860 DSPi is a handheld spectrum analyzer with US DOCSIS 3.0 (8x4) modem that provides all of the testing power needed to ensure HFC networks operate to high standards. This includes balancing of the distribution system, maintaining analog and digital signal quality and controlling return path ingress. Standard Testing Features: 6 MHz Channel Spacing, Return Spectrum Analysis (4 to 65 MHz), Forward Spectrum Analysis (4 to 1000 MHz), Level Measurement, C/N Measurement, QAM Measurement (Level/MER/BER), Channel Plan Scan with Tilt Measurement, Ping, Trace Route, VoIP, Throughput, Cable Modem Statistics, Analog HUM, Depth of Modulation, CSO/CTB, FM Deviation, Sweepless Sweep, Line Viewer and QAM Source. Standard Communication Features: RF Test Port (F-Type, Replaceable), US DOCSIS 3.0 Modem 8x4 (100/304 MBPS), RJ45 Electrical Ethernet Port (10/100MBPS), CM to RJ-45 Mode. The complete kit includes: 860 DSPi Meter, Protective Carrying Case, Shoulder Strap, US AC Power Cable and AC to DC Power Adapter & Battery Charger. Configured with: Power Pack (PP-1), Return Sweep Receiver (SR-1), Spectrum Analyzer (SA-1), QAM (QA-2), Vestigial Side Band Modulation (VSB), TraffiControl (TC-1), Frequency Domain Reflectometer (FDR-1) and Return Transmitter Board (RTB) Options
860 DSPi Field Analyzer

860 DSPi - US (PP-1, VP-1, SA-1, QA-2, VSB, TC-1, FDR-1 & RTB)

Configured with options

The 860 DSPi is a handheld spectrum analyzer with US DOCSIS 3.0 (8x4) modem that provides all of the testing power needed to ensure HFC networks operate to high standards. This includes balancing of the distribution system, maintaining analog and digital signal quality and controlling return path ingress. Standard Testing Features: 6 MHz Channel Spacing, Return Spectrum Analysis (4 to 65 MHz), Forward Spectrum Analysis (4 to 1000 MHz), Level Measurement, C/N Measurement, QAM Measurement (Level/MER/BER), Channel Plan Scan with Tilt Measurement, Ping, Trace Route, VoIP, Throughput, Cable Modem Statistics, Analog HUM, Depth of Modulation, CSO/CTB, FM Deviation, Sweepless Sweep, Line Viewer and QAM Source. Standard Communication Features: RF Test Port (F-Type, Replaceable), US DOCSIS 3.0 Modem 8x4 (100/304 MBPS), RJ45 Electrical Ethernet Port (10/100MBPS), CM to RJ-45 Mode. The complete kit includes: 860 DSPi Meter, Protective Carrying Case, Shoulder Strap, US AC Power Cable and AC to DC Power Adapter & Battery Charger. Configured with: Power Pack (PP-1), Return Tester RSVP (VP-1), Spectrum Analyzer (SA-1), QAM (QA-2), Vestigial Side Band Modulation (VSB), TraffiControl (TC-1), Frequency Domain Reflectometer (FDR-1) and Return Transmitter Board (RTB) Options
860 DSPi Field Analyzer

860 DSPi - US (PP-1, SR-1, VP-1, SA-1, QA-2, VSB, TC-1, FDR-1 & RTB)

Configured with options

The 860 DSPi is a handheld spectrum analyzer with US DOCSIS 3.0 (8x4) modem that provides all of the testing power needed to ensure HFC networks operate to high standards. This includes balancing of the distribution system, maintaining analog and digital signal quality and controlling return path ingress. Standard Testing Features: 6 MHz Channel Spacing, Return Spectrum Analysis (4 to 65 MHz), Forward Spectrum Analysis (4 to 1000 MHz), Level Measurement, C/N Measurement, QAM Measurement (Level/MER/BER), Channel Plan Scan with Tilt Measurement, Ping, Trace Route, VoIP, Throughput, Cable Modem Statistics, Analog HUM, Depth of Modulation, CSO/CTB, FM Deviation, Sweepless Sweep, Line Viewer and QAM Source. Standard Communication Features: RF Test Port (F-Type, Replaceable), US DOCSIS 3.0 Modem 8x4 (100/304 MBPS), RJ45 Electrical Ethernet Port (10/100MBPS), CM to RJ-45 Mode. The complete kit includes: 860 DSPi Meter, Protective Carrying Case, Shoulder Strap, US AC Power Cable and AC to DC Power Adapter & Battery Charger. Configured with: Power Pack (PP-1), Return Sweep Receiver (SR-1), Return Tester RSVP (VP-1), Spectrum Analyzer (SA-1), QAM (QA-2), Vestigial Side Band Modulation (VSB), TraffiControl (TC-1), Frequency Domain Reflectometer (FDR-1) and Return Transmitter Board (RTB) Options
860 DSPi Field Analyzer

860 DSPi - US (PP-1, FS-1, TC-1, FDR-1 & RTB)

Configured with options

The 860 DSPi is a handheld spectrum analyzer with US DOCSIS 3.0 (8x4) modem that provides all of the testing power needed to ensure HFC networks operate to high standards. This includes balancing of the distribution system, maintaining analog and digital signal quality and controlling return path ingress. Standard Testing Features: 6 MHz Channel Spacing, Return Spectrum Analysis (4 to 65 MHz), Forward Spectrum Analysis (4 to 1000 MHz), Level Measurement, C/N Measurement, QAM Measurement (Level/MER/BER), Channel Plan Scan with Tilt Measurement, Ping, Trace Route, VoIP, Throughput, Cable Modem Statistics, Analog HUM, Depth of Modulation, CSO/CTB, FM Deviation, Sweepless Sweep, Line Viewer and QAM Source. Standard Communication Features: RF Test Port (F-Type, Replaceable), US DOCSIS 3.0 Modem 8x4 (100/304 MBPS), RJ45 Electrical Ethernet Port (10/100MBPS), CM to RJ-45 Mode. The complete kit includes: 860 DSPi Meter, Protective Carrying Case, Shoulder Strap, US AC Power Cable and AC to DC Power Adapter & Battery Charger. Configured with: Power Pack (PP-1), Forward Sweep (FS-1), TraffiControl (TC-1), Frequency Domain Reflectometer (FDR-1) and Return Transmitter Board (RTB) Options
860 DSPi Field Analyzer

860 DSPi - US (PP-1, SR-1, FS-1, TC-1, FDR-1 & RTB)

Configured with options

The 860 DSPi is a handheld spectrum analyzer with US DOCSIS 3.0 (8x4) modem that provides all of the testing power needed to ensure HFC networks operate to high standards. This includes balancing of the distribution system, maintaining analog and digital signal quality and controlling return path ingress. Standard Testing Features: 6 MHz Channel Spacing, Return Spectrum Analysis (4 to 65 MHz), Forward Spectrum Analysis (4 to 1000 MHz), Level Measurement, C/N Measurement, QAM Measurement (Level/MER/BER), Channel Plan Scan with Tilt Measurement, Ping, Trace Route, VoIP, Throughput, Cable Modem Statistics, Analog HUM, Depth of Modulation, CSO/CTB, FM Deviation, Sweepless Sweep, Line Viewer and QAM Source. Standard Communication Features: RF Test Port (F-Type, Replaceable), US DOCSIS 3.0 Modem 8x4 (100/304 MBPS), RJ45 Electrical Ethernet Port (10/100MBPS), CM to RJ-45 Mode. The complete kit includes: 860 DSPi Meter, Protective Carrying Case, Shoulder Strap, US AC Power Cable and AC to DC Power Adapter & Battery Charger. Configured with: Power Pack (PP-1), Return Sweep Receiver (SR-1), Forward Sweep (FS-1), TraffiControl (TC-1), Frequency Domain Reflectometer (FDR-1) and Return Transmitter Board (RTB) Options
860 DSPi Field Analyzer

860 DSPi - US (PP-1, VP-1, FS-1, TC-1, FDR-1 & RTB)

Configured with options

The 860 DSPi is a handheld spectrum analyzer with US DOCSIS 3.0 (8x4) modem that provides all of the testing power needed to ensure HFC networks operate to high standards. This includes balancing of the distribution system, maintaining analog and digital signal quality and controlling return path ingress. Standard Testing Features: 6 MHz Channel Spacing, Return Spectrum Analysis (4 to 65 MHz), Forward Spectrum Analysis (4 to 1000 MHz), Level Measurement, C/N Measurement, QAM Measurement (Level/MER/BER), Channel Plan Scan with Tilt Measurement, Ping, Trace Route, VoIP, Throughput, Cable Modem Statistics, Analog HUM, Depth of Modulation, CSO/CTB, FM Deviation, Sweepless Sweep, Line Viewer and QAM Source. Standard Communication Features: RF Test Port (F-Type, Replaceable), US DOCSIS 3.0 Modem 8x4 (100/304 MBPS), RJ45 Electrical Ethernet Port (10/100MBPS), CM to RJ-45 Mode. The complete kit includes: 860 DSPi Meter, Protective Carrying Case, Shoulder Strap, US AC Power Cable and AC to DC Power Adapter & Battery Charger. Configured with: Power Pack (PP-1), Return Tester RSVP (VP-1), Forward Sweep (FS-1), TraffiControl (TC-1), Frequency Domain Reflectometer (FDR-1) and Return Transmitter Board (RTB) Options
860 DSPi Field Analyzer

860 DSPi - US (PP-1, SR-1, VP-1, FS-1, TC-1, FDR-1 & RTB)

Configured with options

The 860 DSPi is a handheld spectrum analyzer with US DOCSIS 3.0 (8x4) modem that provides all of the testing power needed to ensure HFC networks operate to high standards. This includes balancing of the distribution system, maintaining analog and digital signal quality and controlling return path ingress. Standard Testing Features: 6 MHz Channel Spacing, Return Spectrum Analysis (4 to 65 MHz), Forward Spectrum Analysis (4 to 1000 MHz), Level Measurement, C/N Measurement, QAM Measurement (Level/MER/BER), Channel Plan Scan with Tilt Measurement, Ping, Trace Route, VoIP, Throughput, Cable Modem Statistics, Analog HUM, Depth of Modulation, CSO/CTB, FM Deviation, Sweepless Sweep, Line Viewer and QAM Source. Standard Communication Features: RF Test Port (F-Type, Replaceable), US DOCSIS 3.0 Modem 8x4 (100/304 MBPS), RJ45 Electrical Ethernet Port (10/100MBPS), CM to RJ-45 Mode. The complete kit includes: 860 DSPi Meter, Protective Carrying Case, Shoulder Strap, US AC Power Cable and AC to DC Power Adapter & Battery Charger. Configured with: Power Pack (PP-1), Return Sweep Receiver (SR-1), Return Tester RSVP (VP-1), Forward Sweep (FS-1), TraffiControl (TC-1), Frequency Domain Reflectometer (FDR-1) and Return Transmitter Board (RTB) Options
860 DSPi Field Analyzer

860 DSPi - US (PP-1, SA-1, FS-1, TC-1, FDR-1 & RTB)

Configured with options

The 860 DSPi is a handheld spectrum analyzer with US DOCSIS 3.0 (8x4) modem that provides all of the testing power needed to ensure HFC networks operate to high standards. This includes balancing of the distribution system, maintaining analog and digital signal quality and controlling return path ingress. Standard Testing Features: 6 MHz Channel Spacing, Return Spectrum Analysis (4 to 65 MHz), Forward Spectrum Analysis (4 to 1000 MHz), Level Measurement, C/N Measurement, QAM Measurement (Level/MER/BER), Channel Plan Scan with Tilt Measurement, Ping, Trace Route, VoIP, Throughput, Cable Modem Statistics, Analog HUM, Depth of Modulation, CSO/CTB, FM Deviation, Sweepless Sweep, Line Viewer and QAM Source. Standard Communication Features: RF Test Port (F-Type, Replaceable), US DOCSIS 3.0 Modem 8x4 (100/304 MBPS), RJ45 Electrical Ethernet Port (10/100MBPS), CM to RJ-45 Mode. The complete kit includes: 860 DSPi Meter, Protective Carrying Case, Shoulder Strap, US AC Power Cable and AC to DC Power Adapter & Battery Charger. Configured with: Power Pack (PP-1), Spectrum Analyzer (SA-1), Forward Sweep (FS-1), TraffiControl (TC-1), Frequency Domain Reflectometer (FDR-1) and Return Transmitter Board (RTB) Options
860 DSPi Field Analyzer

860 DSPi - US (PP-1, SR-1, SA-1, FS-1, TC-1, FDR-1 & RTB)

Configured with options

The 860 DSPi is a handheld spectrum analyzer with US DOCSIS 3.0 (8x4) modem that provides all of the testing power needed to ensure HFC networks operate to high standards. This includes balancing of the distribution system, maintaining analog and digital signal quality and controlling return path ingress. Standard Testing Features: 6 MHz Channel Spacing, Return Spectrum Analysis (4 to 65 MHz), Forward Spectrum Analysis (4 to 1000 MHz), Level Measurement, C/N Measurement, QAM Measurement (Level/MER/BER), Channel Plan Scan with Tilt Measurement, Ping, Trace Route, VoIP, Throughput, Cable Modem Statistics, Analog HUM, Depth of Modulation, CSO/CTB, FM Deviation, Sweepless Sweep, Line Viewer and QAM Source. Standard Communication Features: RF Test Port (F-Type, Replaceable), US DOCSIS 3.0 Modem 8x4 (100/304 MBPS), RJ45 Electrical Ethernet Port (10/100MBPS), CM to RJ-45 Mode. The complete kit includes: 860 DSPi Meter, Protective Carrying Case, Shoulder Strap, US AC Power Cable and AC to DC Power Adapter & Battery Charger. Configured with: Power Pack (PP-1), Return Sweep Receiver (SR-1), Spectrum Analyzer (SA-1), Forward Sweep (FS-1), TraffiControl (TC-1), Frequency Domain Reflectometer (FDR-1) and Return Transmitter Board (RTB) Options
860 DSPi Field Analyzer

860 DSPi - US (PP-1, VP-1, SA-1, FS-1, TC-1, FDR-1 & RTB)

Configured with options

The 860 DSPi is a handheld spectrum analyzer with US DOCSIS 3.0 (8x4) modem that provides all of the testing power needed to ensure HFC networks operate to high standards. This includes balancing of the distribution system, maintaining analog and digital signal quality and controlling return path ingress. Standard Testing Features: 6 MHz Channel Spacing, Return Spectrum Analysis (4 to 65 MHz), Forward Spectrum Analysis (4 to 1000 MHz), Level Measurement, C/N Measurement, QAM Measurement (Level/MER/BER), Channel Plan Scan with Tilt Measurement, Ping, Trace Route, VoIP, Throughput, Cable Modem Statistics, Analog HUM, Depth of Modulation, CSO/CTB, FM Deviation, Sweepless Sweep, Line Viewer and QAM Source. Standard Communication Features: RF Test Port (F-Type, Replaceable), US DOCSIS 3.0 Modem 8x4 (100/304 MBPS), RJ45 Electrical Ethernet Port (10/100MBPS), CM to RJ-45 Mode. The complete kit includes: 860 DSPi Meter, Protective Carrying Case, Shoulder Strap, US AC Power Cable and AC to DC Power Adapter & Battery Charger. Configured with: Power Pack (PP-1), Return Tester RSVP (VP-1), Spectrum Analyzer (SA-1), Forward Sweep (FS-1), TraffiControl (TC-1), Frequency Domain Reflectometer (FDR-1) and Return Transmitter Board (RTB) Options
860 DSPi Field Analyzer

860 DSPi - US (PP-1, SR-1, VP-1, SA-1, FS-1, TC-1, FDR-1 & RTB)

Configured with options

The 860 DSPi is a handheld spectrum analyzer with US DOCSIS 3.0 (8x4) modem that provides all of the testing power needed to ensure HFC networks operate to high standards. This includes balancing of the distribution system, maintaining analog and digital signal quality and controlling return path ingress. Standard Testing Features: 6 MHz Channel Spacing, Return Spectrum Analysis (4 to 65 MHz), Forward Spectrum Analysis (4 to 1000 MHz), Level Measurement, C/N Measurement, QAM Measurement (Level/MER/BER), Channel Plan Scan with Tilt Measurement, Ping, Trace Route, VoIP, Throughput, Cable Modem Statistics, Analog HUM, Depth of Modulation, CSO/CTB, FM Deviation, Sweepless Sweep, Line Viewer and QAM Source. Standard Communication Features: RF Test Port (F-Type, Replaceable), US DOCSIS 3.0 Modem 8x4 (100/304 MBPS), RJ45 Electrical Ethernet Port (10/100MBPS), CM to RJ-45 Mode. The complete kit includes: 860 DSPi Meter, Protective Carrying Case, Shoulder Strap, US AC Power Cable and AC to DC Power Adapter & Battery Charger. Configured with: Power Pack (PP-1), Return Sweep Receiver (SR-1), Return Tester RSVP (VP-1), Spectrum Analyzer (SA-1), Forward Sweep (FS-1), TraffiControl (TC-1), Frequency Domain Reflectometer (FDR-1) and Return Transmitter Board (RTB) Options
860 DSPi Field Analyzer

860 DSPi - US (PP-1, QA-2, FS-1, TC-1, FDR-1 & RTB)

Configured with options

The 860 DSPi is a handheld spectrum analyzer with US DOCSIS 3.0 (8x4) modem that provides all of the testing power needed to ensure HFC networks operate to high standards. This includes balancing of the distribution system, maintaining analog and digital signal quality and controlling return path ingress. Standard Testing Features: 6 MHz Channel Spacing, Return Spectrum Analysis (4 to 65 MHz), Forward Spectrum Analysis (4 to 1000 MHz), Level Measurement, C/N Measurement, QAM Measurement (Level/MER/BER), Channel Plan Scan with Tilt Measurement, Ping, Trace Route, VoIP, Throughput, Cable Modem Statistics, Analog HUM, Depth of Modulation, CSO/CTB, FM Deviation, Sweepless Sweep, Line Viewer and QAM Source. Standard Communication Features: RF Test Port (F-Type, Replaceable), US DOCSIS 3.0 Modem 8x4 (100/304 MBPS), RJ45 Electrical Ethernet Port (10/100MBPS), CM to RJ-45 Mode. The complete kit includes: 860 DSPi Meter, Protective Carrying Case, Shoulder Strap, US AC Power Cable and AC to DC Power Adapter & Battery Charger. Configured with: Power Pack (PP-1), QAM (QA-2), Forward Sweep (FS-1), TraffiControl (TC-1), Frequency Domain Reflectometer (FDR-1) and Return Transmitter Board (RTB) Options
860 DSPi Field Analyzer

860 DSPi - US (PP-1, SR-1, QA-2, FS-1, TC-1, FDR-1 & RTB)

Configured with options

The 860 DSPi is a handheld spectrum analyzer with US DOCSIS 3.0 (8x4) modem that provides all of the testing power needed to ensure HFC networks operate to high standards. This includes balancing of the distribution system, maintaining analog and digital signal quality and controlling return path ingress. Standard Testing Features: 6 MHz Channel Spacing, Return Spectrum Analysis (4 to 65 MHz), Forward Spectrum Analysis (4 to 1000 MHz), Level Measurement, C/N Measurement, QAM Measurement (Level/MER/BER), Channel Plan Scan with Tilt Measurement, Ping, Trace Route, VoIP, Throughput, Cable Modem Statistics, Analog HUM, Depth of Modulation, CSO/CTB, FM Deviation, Sweepless Sweep, Line Viewer and QAM Source. Standard Communication Features: RF Test Port (F-Type, Replaceable), US DOCSIS 3.0 Modem 8x4 (100/304 MBPS), RJ45 Electrical Ethernet Port (10/100MBPS), CM to RJ-45 Mode. The complete kit includes: 860 DSPi Meter, Protective Carrying Case, Shoulder Strap, US AC Power Cable and AC to DC Power Adapter & Battery Charger. Configured with: Power Pack (PP-1), Return Sweep Receiver (SR-1), QAM (QA-2), Forward Sweep (FS-1), TraffiControl (TC-1), Frequency Domain Reflectometer (FDR-1) and Return Transmitter Board (RTB) Options
860 DSPi Field Analyzer

860 DSPi - US (PP-1, VP-1, QA-2, FS-1, TC-1, FDR-1 & RTB)

Configured with options

The 860 DSPi is a handheld spectrum analyzer with US DOCSIS 3.0 (8x4) modem that provides all of the testing power needed to ensure HFC networks operate to high standards. This includes balancing of the distribution system, maintaining analog and digital signal quality and controlling return path ingress. Standard Testing Features: 6 MHz Channel Spacing, Return Spectrum Analysis (4 to 65 MHz), Forward Spectrum Analysis (4 to 1000 MHz), Level Measurement, C/N Measurement, QAM Measurement (Level/MER/BER), Channel Plan Scan with Tilt Measurement, Ping, Trace Route, VoIP, Throughput, Cable Modem Statistics, Analog HUM, Depth of Modulation, CSO/CTB, FM Deviation, Sweepless Sweep, Line Viewer and QAM Source. Standard Communication Features: RF Test Port (F-Type, Replaceable), US DOCSIS 3.0 Modem 8x4 (100/304 MBPS), RJ45 Electrical Ethernet Port (10/100MBPS), CM to RJ-45 Mode. The complete kit includes: 860 DSPi Meter, Protective Carrying Case, Shoulder Strap, US AC Power Cable and AC to DC Power Adapter & Battery Charger. Configured with: Power Pack (PP-1), Return Tester RSVP (VP-1), QAM (QA-2), Forward Sweep (FS-1), TraffiControl (TC-1), Frequency Domain Reflectometer (FDR-1) and Return Transmitter Board (RTB) Options
860 DSPi Field Analyzer

860 DSPi - US (PP-1, SR-1, VP-1, QA-2, FS-1, TC-1, FDR-1 & RTB)

Configured with options

The 860 DSPi is a handheld spectrum analyzer with US DOCSIS 3.0 (8x4) modem that provides all of the testing power needed to ensure HFC networks operate to high standards. This includes balancing of the distribution system, maintaining analog and digital signal quality and controlling return path ingress. Standard Testing Features: 6 MHz Channel Spacing, Return Spectrum Analysis (4 to 65 MHz), Forward Spectrum Analysis (4 to 1000 MHz), Level Measurement, C/N Measurement, QAM Measurement (Level/MER/BER), Channel Plan Scan with Tilt Measurement, Ping, Trace Route, VoIP, Throughput, Cable Modem Statistics, Analog HUM, Depth of Modulation, CSO/CTB, FM Deviation, Sweepless Sweep, Line Viewer and QAM Source. Standard Communication Features: RF Test Port (F-Type, Replaceable), US DOCSIS 3.0 Modem 8x4 (100/304 MBPS), RJ45 Electrical Ethernet Port (10/100MBPS), CM to RJ-45 Mode. The complete kit includes: 860 DSPi Meter, Protective Carrying Case, Shoulder Strap, US AC Power Cable and AC to DC Power Adapter & Battery Charger. Configured with: Power Pack (PP-1), Return Sweep Receiver (SR-1), Return Tester RSVP (VP-1), QAM (QA-2), Forward Sweep (FS-1), TraffiControl (TC-1), Frequency Domain Reflectometer (FDR-1) and Return Transmitter Board (RTB) Options
860 DSPi Field Analyzer

860 DSPi - US (PP-1, SA-1, QA-2, FS-1, TC-1, FDR-1 & RTB)

Configured with options

The 860 DSPi is a handheld spectrum analyzer with US DOCSIS 3.0 (8x4) modem that provides all of the testing power needed to ensure HFC networks operate to high standards. This includes balancing of the distribution system, maintaining analog and digital signal quality and controlling return path ingress. Standard Testing Features: 6 MHz Channel Spacing, Return Spectrum Analysis (4 to 65 MHz), Forward Spectrum Analysis (4 to 1000 MHz), Level Measurement, C/N Measurement, QAM Measurement (Level/MER/BER), Channel Plan Scan with Tilt Measurement, Ping, Trace Route, VoIP, Throughput, Cable Modem Statistics, Analog HUM, Depth of Modulation, CSO/CTB, FM Deviation, Sweepless Sweep, Line Viewer and QAM Source. Standard Communication Features: RF Test Port (F-Type, Replaceable), US DOCSIS 3.0 Modem 8x4 (100/304 MBPS), RJ45 Electrical Ethernet Port (10/100MBPS), CM to RJ-45 Mode. The complete kit includes: 860 DSPi Meter, Protective Carrying Case, Shoulder Strap, US AC Power Cable and AC to DC Power Adapter & Battery Charger. Configured with: Power Pack (PP-1), Spectrum Analyzer (SA-1), QAM (QA-2), Forward Sweep (FS-1), TraffiControl (TC-1), Frequency Domain Reflectometer (FDR-1) and Return Transmitter Board (RTB) Options
860 DSPi Field Analyzer

860 DSPi - US (PP-1, SR-1, SA-1, QA-2, FS-1, TC-1, FDR-1 & RTB)

Configured with options

The 860 DSPi is a handheld spectrum analyzer with US DOCSIS 3.0 (8x4) modem that provides all of the testing power needed to ensure HFC networks operate to high standards. This includes balancing of the distribution system, maintaining analog and digital signal quality and controlling return path ingress. Standard Testing Features: 6 MHz Channel Spacing, Return Spectrum Analysis (4 to 65 MHz), Forward Spectrum Analysis (4 to 1000 MHz), Level Measurement, C/N Measurement, QAM Measurement (Level/MER/BER), Channel Plan Scan with Tilt Measurement, Ping, Trace Route, VoIP, Throughput, Cable Modem Statistics, Analog HUM, Depth of Modulation, CSO/CTB, FM Deviation, Sweepless Sweep, Line Viewer and QAM Source. Standard Communication Features: RF Test Port (F-Type, Replaceable), US DOCSIS 3.0 Modem 8x4 (100/304 MBPS), RJ45 Electrical Ethernet Port (10/100MBPS), CM to RJ-45 Mode. The complete kit includes: 860 DSPi Meter, Protective Carrying Case, Shoulder Strap, US AC Power Cable and AC to DC Power Adapter & Battery Charger. Configured with: Power Pack (PP-1), Return Sweep Receiver (SR-1), Spectrum Analyzer (SA-1), QAM (QA-2), Forward Sweep (FS-1), TraffiControl (TC-1), Frequency Domain Reflectometer (FDR-1) and Return Transmitter Board (RTB) Options
860 DSPi Field Analyzer

860 DSPi - US (PP-1, VP-1, SA-1, QA-2, FS-1, TC-1, FDR-1 & RTB)

Configured with options

The 860 DSPi is a handheld spectrum analyzer with US DOCSIS 3.0 (8x4) modem that provides all of the testing power needed to ensure HFC networks operate to high standards. This includes balancing of the distribution system, maintaining analog and digital signal quality and controlling return path ingress. Standard Testing Features: 6 MHz Channel Spacing, Return Spectrum Analysis (4 to 65 MHz), Forward Spectrum Analysis (4 to 1000 MHz), Level Measurement, C/N Measurement, QAM Measurement (Level/MER/BER), Channel Plan Scan with Tilt Measurement, Ping, Trace Route, VoIP, Throughput, Cable Modem Statistics, Analog HUM, Depth of Modulation, CSO/CTB, FM Deviation, Sweepless Sweep, Line Viewer and QAM Source. Standard Communication Features: RF Test Port (F-Type, Replaceable), US DOCSIS 3.0 Modem 8x4 (100/304 MBPS), RJ45 Electrical Ethernet Port (10/100MBPS), CM to RJ-45 Mode. The complete kit includes: 860 DSPi Meter, Protective Carrying Case, Shoulder Strap, US AC Power Cable and AC to DC Power Adapter & Battery Charger. Configured with: Power Pack (PP-1), Return Tester RSVP (VP-1), Spectrum Analyzer (SA-1), QAM (QA-2), Forward Sweep (FS-1), TraffiControl (TC-1), Frequency Domain Reflectometer (FDR-1) and Return Transmitter Board (RTB) Options
860 DSPi Field Analyzer

860 DSPi - US (PP-1, SR-1, VP-1, SA-1, QA-2, FS-1, TC-1, FDR-1 & RTB)

Configured with options

The 860 DSPi is a handheld spectrum analyzer with US DOCSIS 3.0 (8x4) modem that provides all of the testing power needed to ensure HFC networks operate to high standards. This includes balancing of the distribution system, maintaining analog and digital signal quality and controlling return path ingress. Standard Testing Features: 6 MHz Channel Spacing, Return Spectrum Analysis (4 to 65 MHz), Forward Spectrum Analysis (4 to 1000 MHz), Level Measurement, C/N Measurement, QAM Measurement (Level/MER/BER), Channel Plan Scan with Tilt Measurement, Ping, Trace Route, VoIP, Throughput, Cable Modem Statistics, Analog HUM, Depth of Modulation, CSO/CTB, FM Deviation, Sweepless Sweep, Line Viewer and QAM Source. Standard Communication Features: RF Test Port (F-Type, Replaceable), US DOCSIS 3.0 Modem 8x4 (100/304 MBPS), RJ45 Electrical Ethernet Port (10/100MBPS), CM to RJ-45 Mode. The complete kit includes: 860 DSPi Meter, Protective Carrying Case, Shoulder Strap, US AC Power Cable and AC to DC Power Adapter & Battery Charger. Configured with: Power Pack (PP-1), Return Sweep Receiver (SR-1), Return Tester RSVP (VP-1), Spectrum Analyzer (SA-1), QAM (QA-2), Forward Sweep (FS-1), TraffiControl (TC-1), Frequency Domain Reflectometer (FDR-1) and Return Transmitter Board (RTB) Options
860 DSPi Field Analyzer

860 DSPi - US (PP-1, VSB, FS-1, TC-1, FDR-1 & RTB)

Configured with options

The 860 DSPi is a handheld spectrum analyzer with US DOCSIS 3.0 (8x4) modem that provides all of the testing power needed to ensure HFC networks operate to high standards. This includes balancing of the distribution system, maintaining analog and digital signal quality and controlling return path ingress. Standard Testing Features: 6 MHz Channel Spacing, Return Spectrum Analysis (4 to 65 MHz), Forward Spectrum Analysis (4 to 1000 MHz), Level Measurement, C/N Measurement, QAM Measurement (Level/MER/BER), Channel Plan Scan with Tilt Measurement, Ping, Trace Route, VoIP, Throughput, Cable Modem Statistics, Analog HUM, Depth of Modulation, CSO/CTB, FM Deviation, Sweepless Sweep, Line Viewer and QAM Source. Standard Communication Features: RF Test Port (F-Type, Replaceable), US DOCSIS 3.0 Modem 8x4 (100/304 MBPS), RJ45 Electrical Ethernet Port (10/100MBPS), CM to RJ-45 Mode. The complete kit includes: 860 DSPi Meter, Protective Carrying Case, Shoulder Strap, US AC Power Cable and AC to DC Power Adapter & Battery Charger. Configured with: Power Pack (PP-1), Vestigial Side Band Modulation (VSB), Forward Sweep (FS-1), TraffiControl (TC-1), Frequency Domain Reflectometer (FDR-1) and Return Transmitter Board (RTB) Options
860 DSPi Field Analyzer

860 DSPi - US (PP-1, SR-1, VSB, FS-1, TC-1, FDR-1 & RTB)

Configured with options

The 860 DSPi is a handheld spectrum analyzer with US DOCSIS 3.0 (8x4) modem that provides all of the testing power needed to ensure HFC networks operate to high standards. This includes balancing of the distribution system, maintaining analog and digital signal quality and controlling return path ingress. Standard Testing Features: 6 MHz Channel Spacing, Return Spectrum Analysis (4 to 65 MHz), Forward Spectrum Analysis (4 to 1000 MHz), Level Measurement, C/N Measurement, QAM Measurement (Level/MER/BER), Channel Plan Scan with Tilt Measurement, Ping, Trace Route, VoIP, Throughput, Cable Modem Statistics, Analog HUM, Depth of Modulation, CSO/CTB, FM Deviation, Sweepless Sweep, Line Viewer and QAM Source. Standard Communication Features: RF Test Port (F-Type, Replaceable), US DOCSIS 3.0 Modem 8x4 (100/304 MBPS), RJ45 Electrical Ethernet Port (10/100MBPS), CM to RJ-45 Mode. The complete kit includes: 860 DSPi Meter, Protective Carrying Case, Shoulder Strap, US AC Power Cable and AC to DC Power Adapter & Battery Charger. Configured with: Power Pack (PP-1), Return Sweep Receiver (SR-1), Vestigial Side Band Modulation (VSB), Forward Sweep (FS-1), TraffiControl (TC-1), Frequency Domain Reflectometer (FDR-1) and Return Transmitter Board (RTB) Options
860 DSPi Field Analyzer

860 DSPi - US (PP-1, VP-1, VSB, FS-1, TC-1, FDR-1 & RTB)

Configured with options

The 860 DSPi is a handheld spectrum analyzer with US DOCSIS 3.0 (8x4) modem that provides all of the testing power needed to ensure HFC networks operate to high standards. This includes balancing of the distribution system, maintaining analog and digital signal quality and controlling return path ingress. Standard Testing Features: 6 MHz Channel Spacing, Return Spectrum Analysis (4 to 65 MHz), Forward Spectrum Analysis (4 to 1000 MHz), Level Measurement, C/N Measurement, QAM Measurement (Level/MER/BER), Channel Plan Scan with Tilt Measurement, Ping, Trace Route, VoIP, Throughput, Cable Modem Statistics, Analog HUM, Depth of Modulation, CSO/CTB, FM Deviation, Sweepless Sweep, Line Viewer and QAM Source. Standard Communication Features: RF Test Port (F-Type, Replaceable), US DOCSIS 3.0 Modem 8x4 (100/304 MBPS), RJ45 Electrical Ethernet Port (10/100MBPS), CM to RJ-45 Mode. The complete kit includes: 860 DSPi Meter, Protective Carrying Case, Shoulder Strap, US AC Power Cable and AC to DC Power Adapter & Battery Charger. Configured with: Power Pack (PP-1), Return Tester RSVP (VP-1), Vestigial Side Band Modulation (VSB), Forward Sweep (FS-1), TraffiControl (TC-1), Frequency Domain Reflectometer (FDR-1) and Return Transmitter Board (RTB) Options
860 DSPi Field Analyzer

860 DSPi - US (PP-1, SR-1, VP-1, VSB, FS-1, TC-1, FDR-1 & RTB)

Configured with options

The 860 DSPi is a handheld spectrum analyzer with US DOCSIS 3.0 (8x4) modem that provides all of the testing power needed to ensure HFC networks operate to high standards. This includes balancing of the distribution system, maintaining analog and digital signal quality and controlling return path ingress. Standard Testing Features: 6 MHz Channel Spacing, Return Spectrum Analysis (4 to 65 MHz), Forward Spectrum Analysis (4 to 1000 MHz), Level Measurement, C/N Measurement, QAM Measurement (Level/MER/BER), Channel Plan Scan with Tilt Measurement, Ping, Trace Route, VoIP, Throughput, Cable Modem Statistics, Analog HUM, Depth of Modulation, CSO/CTB, FM Deviation, Sweepless Sweep, Line Viewer and QAM Source. Standard Communication Features: RF Test Port (F-Type, Replaceable), US DOCSIS 3.0 Modem 8x4 (100/304 MBPS), RJ45 Electrical Ethernet Port (10/100MBPS), CM to RJ-45 Mode. The complete kit includes: 860 DSPi Meter, Protective Carrying Case, Shoulder Strap, US AC Power Cable and AC to DC Power Adapter & Battery Charger. Configured with: Power Pack (PP-1), Return Sweep Receiver (SR-1), Return Tester RSVP (VP-1), Vestigial Side Band Modulation (VSB), Forward Sweep (FS-1), TraffiControl (TC-1), Frequency Domain Reflectometer (FDR-1) and Return Transmitter Board (RTB) Options
860 DSPi Field Analyzer

860 DSPi - US (PP-1, SA-1, VSB, FS-1, TC-1, FDR-1 & RTB)

Configured with options

The 860 DSPi is a handheld spectrum analyzer with US DOCSIS 3.0 (8x4) modem that provides all of the testing power needed to ensure HFC networks operate to high standards. This includes balancing of the distribution system, maintaining analog and digital signal quality and controlling return path ingress. Standard Testing Features: 6 MHz Channel Spacing, Return Spectrum Analysis (4 to 65 MHz), Forward Spectrum Analysis (4 to 1000 MHz), Level Measurement, C/N Measurement, QAM Measurement (Level/MER/BER), Channel Plan Scan with Tilt Measurement, Ping, Trace Route, VoIP, Throughput, Cable Modem Statistics, Analog HUM, Depth of Modulation, CSO/CTB, FM Deviation, Sweepless Sweep, Line Viewer and QAM Source. Standard Communication Features: RF Test Port (F-Type, Replaceable), US DOCSIS 3.0 Modem 8x4 (100/304 MBPS), RJ45 Electrical Ethernet Port (10/100MBPS), CM to RJ-45 Mode. The complete kit includes: 860 DSPi Meter, Protective Carrying Case, Shoulder Strap, US AC Power Cable and AC to DC Power Adapter & Battery Charger. Configured with: Power Pack (PP-1), Spectrum Analyzer (SA-1), Vestigial Side Band Modulation (VSB), Forward Sweep (FS-1), TraffiControl (TC-1), Frequency Domain Reflectometer (FDR-1) and Return Transmitter Board (RTB) Options
860 DSPi Field Analyzer

860 DSPi - US (PP-1, SR-1, SA-1, VSB, FS-1, TC-1, FDR-1 & RTB)

Configured with options

The 860 DSPi is a handheld spectrum analyzer with US DOCSIS 3.0 (8x4) modem that provides all of the testing power needed to ensure HFC networks operate to high standards. This includes balancing of the distribution system, maintaining analog and digital signal quality and controlling return path ingress. Standard Testing Features: 6 MHz Channel Spacing, Return Spectrum Analysis (4 to 65 MHz), Forward Spectrum Analysis (4 to 1000 MHz), Level Measurement, C/N Measurement, QAM Measurement (Level/MER/BER), Channel Plan Scan with Tilt Measurement, Ping, Trace Route, VoIP, Throughput, Cable Modem Statistics, Analog HUM, Depth of Modulation, CSO/CTB, FM Deviation, Sweepless Sweep, Line Viewer and QAM Source. Standard Communication Features: RF Test Port (F-Type, Replaceable), US DOCSIS 3.0 Modem 8x4 (100/304 MBPS), RJ45 Electrical Ethernet Port (10/100MBPS), CM to RJ-45 Mode. The complete kit includes: 860 DSPi Meter, Protective Carrying Case, Shoulder Strap, US AC Power Cable and AC to DC Power Adapter & Battery Charger. Configured with: Power Pack (PP-1), Return Sweep Receiver (SR-1), Spectrum Analyzer (SA-1), Vestigial Side Band Modulation (VSB), Forward Sweep (FS-1), TraffiControl (TC-1), Frequency Domain Reflectometer (FDR-1) and Return Transmitter Board (RTB) Options
860 DSPi Field Analyzer

860 DSPi - US (PP-1, VP-1, SA-1, VSB, FS-1, TC-1, FDR-1 & RTB)

Configured with options

The 860 DSPi is a handheld spectrum analyzer with US DOCSIS 3.0 (8x4) modem that provides all of the testing power needed to ensure HFC networks operate to high standards. This includes balancing of the distribution system, maintaining analog and digital signal quality and controlling return path ingress. Standard Testing Features: 6 MHz Channel Spacing, Return Spectrum Analysis (4 to 65 MHz), Forward Spectrum Analysis (4 to 1000 MHz), Level Measurement, C/N Measurement, QAM Measurement (Level/MER/BER), Channel Plan Scan with Tilt Measurement, Ping, Trace Route, VoIP, Throughput, Cable Modem Statistics, Analog HUM, Depth of Modulation, CSO/CTB, FM Deviation, Sweepless Sweep, Line Viewer and QAM Source. Standard Communication Features: RF Test Port (F-Type, Replaceable), US DOCSIS 3.0 Modem 8x4 (100/304 MBPS), RJ45 Electrical Ethernet Port (10/100MBPS), CM to RJ-45 Mode. The complete kit includes: 860 DSPi Meter, Protective Carrying Case, Shoulder Strap, US AC Power Cable and AC to DC Power Adapter & Battery Charger. Configured with: Power Pack (PP-1), Return Tester RSVP (VP-1), Spectrum Analyzer (SA-1), Vestigial Side Band Modulation (VSB), Forward Sweep (FS-1), TraffiControl (TC-1), Frequency Domain Reflectometer (FDR-1) and Return Transmitter Board (RTB) Options
860 DSPi Field Analyzer

860 DSPi - US (PP-1, SR-1, VP-1, SA-1, VSB, FS-1, TC-1, FDR-1 & RTB)

Configured with options

The 860 DSPi is a handheld spectrum analyzer with US DOCSIS 3.0 (8x4) modem that provides all of the testing power needed to ensure HFC networks operate to high standards. This includes balancing of the distribution system, maintaining analog and digital signal quality and controlling return path ingress. Standard Testing Features: 6 MHz Channel Spacing, Return Spectrum Analysis (4 to 65 MHz), Forward Spectrum Analysis (4 to 1000 MHz), Level Measurement, C/N Measurement, QAM Measurement (Level/MER/BER), Channel Plan Scan with Tilt Measurement, Ping, Trace Route, VoIP, Throughput, Cable Modem Statistics, Analog HUM, Depth of Modulation, CSO/CTB, FM Deviation, Sweepless Sweep, Line Viewer and QAM Source. Standard Communication Features: RF Test Port (F-Type, Replaceable), US DOCSIS 3.0 Modem 8x4 (100/304 MBPS), RJ45 Electrical Ethernet Port (10/100MBPS), CM to RJ-45 Mode. The complete kit includes: 860 DSPi Meter, Protective Carrying Case, Shoulder Strap, US AC Power Cable and AC to DC Power Adapter & Battery Charger. Configured with: Power Pack (PP-1), Return Sweep Receiver (SR-1), Return Tester RSVP (VP-1), Spectrum Analyzer (SA-1), Vestigial Side Band Modulation (VSB), Forward Sweep (FS-1), TraffiControl (TC-1), Frequency Domain Reflectometer (FDR-1) and Return Transmitter Board (RTB) Options
860 DSPi Field Analyzer

860 DSPi - US (PP-1, QA-2, VSB, FS-1, TC-1, FDR-1 & RTB)

Configured with options

The 860 DSPi is a handheld spectrum analyzer with US DOCSIS 3.0 (8x4) modem that provides all of the testing power needed to ensure HFC networks operate to high standards. This includes balancing of the distribution system, maintaining analog and digital signal quality and controlling return path ingress. Standard Testing Features: 6 MHz Channel Spacing, Return Spectrum Analysis (4 to 65 MHz), Forward Spectrum Analysis (4 to 1000 MHz), Level Measurement, C/N Measurement, QAM Measurement (Level/MER/BER), Channel Plan Scan with Tilt Measurement, Ping, Trace Route, VoIP, Throughput, Cable Modem Statistics, Analog HUM, Depth of Modulation, CSO/CTB, FM Deviation, Sweepless Sweep, Line Viewer and QAM Source. Standard Communication Features: RF Test Port (F-Type, Replaceable), US DOCSIS 3.0 Modem 8x4 (100/304 MBPS), RJ45 Electrical Ethernet Port (10/100MBPS), CM to RJ-45 Mode. The complete kit includes: 860 DSPi Meter, Protective Carrying Case, Shoulder Strap, US AC Power Cable and AC to DC Power Adapter & Battery Charger. Configured with: Power Pack (PP-1), QAM (QA-2), Vestigial Side Band Modulation (VSB), Forward Sweep (FS-1), TraffiControl (TC-1), Frequency Domain Reflectometer (FDR-1) and Return Transmitter Board (RTB) Options
860 DSPi Field Analyzer

860 DSPi - US (PP-1, SR-1, QA-2, VSB, FS-1, TC-1, FDR-1 & RTB)

Configured with options

The 860 DSPi is a handheld spectrum analyzer with US DOCSIS 3.0 (8x4) modem that provides all of the testing power needed to ensure HFC networks operate to high standards. This includes balancing of the distribution system, maintaining analog and digital signal quality and controlling return path ingress. Standard Testing Features: 6 MHz Channel Spacing, Return Spectrum Analysis (4 to 65 MHz), Forward Spectrum Analysis (4 to 1000 MHz), Level Measurement, C/N Measurement, QAM Measurement (Level/MER/BER), Channel Plan Scan with Tilt Measurement, Ping, Trace Route, VoIP, Throughput, Cable Modem Statistics, Analog HUM, Depth of Modulation, CSO/CTB, FM Deviation, Sweepless Sweep, Line Viewer and QAM Source. Standard Communication Features: RF Test Port (F-Type, Replaceable), US DOCSIS 3.0 Modem 8x4 (100/304 MBPS), RJ45 Electrical Ethernet Port (10/100MBPS), CM to RJ-45 Mode. The complete kit includes: 860 DSPi Meter, Protective Carrying Case, Shoulder Strap, US AC Power Cable and AC to DC Power Adapter & Battery Charger. Configured with: Power Pack (PP-1), Return Sweep Receiver (SR-1), QAM (QA-2), Vestigial Side Band Modulation (VSB), Forward Sweep (FS-1), TraffiControl (TC-1), Frequency Domain Reflectometer (FDR-1) and Return Transmitter Board (RTB) Options
860 DSPi Field Analyzer

860 DSPi - US (PP-1, VP-1, QA-2, VSB, FS-1, TC-1, FDR-1 & RTB)

Configured with options

The 860 DSPi is a handheld spectrum analyzer with US DOCSIS 3.0 (8x4) modem that provides all of the testing power needed to ensure HFC networks operate to high standards. This includes balancing of the distribution system, maintaining analog and digital signal quality and controlling return path ingress. Standard Testing Features: 6 MHz Channel Spacing, Return Spectrum Analysis (4 to 65 MHz), Forward Spectrum Analysis (4 to 1000 MHz), Level Measurement, C/N Measurement, QAM Measurement (Level/MER/BER), Channel Plan Scan with Tilt Measurement, Ping, Trace Route, VoIP, Throughput, Cable Modem Statistics, Analog HUM, Depth of Modulation, CSO/CTB, FM Deviation, Sweepless Sweep, Line Viewer and QAM Source. Standard Communication Features: RF Test Port (F-Type, Replaceable), US DOCSIS 3.0 Modem 8x4 (100/304 MBPS), RJ45 Electrical Ethernet Port (10/100MBPS), CM to RJ-45 Mode. The complete kit includes: 860 DSPi Meter, Protective Carrying Case, Shoulder Strap, US AC Power Cable and AC to DC Power Adapter & Battery Charger. Configured with: Power Pack (PP-1), Return Tester RSVP (VP-1), QAM (QA-2), Vestigial Side Band Modulation (VSB), Forward Sweep (FS-1), TraffiControl (TC-1), Frequency Domain Reflectometer (FDR-1) and Return Transmitter Board (RTB) Options
860 DSPi Field Analyzer

860 DSPi - US (PP-1, SR-1, VP-1, QA-2, VSB, FS-1, TC-1, FDR-1 & RTB)

Configured with options

The 860 DSPi is a handheld spectrum analyzer with US DOCSIS 3.0 (8x4) modem that provides all of the testing power needed to ensure HFC networks operate to high standards. This includes balancing of the distribution system, maintaining analog and digital signal quality and controlling return path ingress. Standard Testing Features: 6 MHz Channel Spacing, Return Spectrum Analysis (4 to 65 MHz), Forward Spectrum Analysis (4 to 1000 MHz), Level Measurement, C/N Measurement, QAM Measurement (Level/MER/BER), Channel Plan Scan with Tilt Measurement, Ping, Trace Route, VoIP, Throughput, Cable Modem Statistics, Analog HUM, Depth of Modulation, CSO/CTB, FM Deviation, Sweepless Sweep, Line Viewer and QAM Source. Standard Communication Features: RF Test Port (F-Type, Replaceable), US DOCSIS 3.0 Modem 8x4 (100/304 MBPS), RJ45 Electrical Ethernet Port (10/100MBPS), CM to RJ-45 Mode. The complete kit includes: 860 DSPi Meter, Protective Carrying Case, Shoulder Strap, US AC Power Cable and AC to DC Power Adapter & Battery Charger. Configured with: Power Pack (PP-1), Return Sweep Receiver (SR-1), Return Tester RSVP (VP-1), QAM (QA-2), Vestigial Side Band Modulation (VSB), Forward Sweep (FS-1), TraffiControl (TC-1), Frequency Domain Reflectometer (FDR-1) and Return Transmitter Board (RTB) Options
860 DSPi Field Analyzer

860 DSPi - US (PP-1, SA-1, QA-2, VSB, FS-1, TC-1, FDR-1 & RTB)

Configured with options

The 860 DSPi is a handheld spectrum analyzer with US DOCSIS 3.0 (8x4) modem that provides all of the testing power needed to ensure HFC networks operate to high standards. This includes balancing of the distribution system, maintaining analog and digital signal quality and controlling return path ingress. Standard Testing Features: 6 MHz Channel Spacing, Return Spectrum Analysis (4 to 65 MHz), Forward Spectrum Analysis (4 to 1000 MHz), Level Measurement, C/N Measurement, QAM Measurement (Level/MER/BER), Channel Plan Scan with Tilt Measurement, Ping, Trace Route, VoIP, Throughput, Cable Modem Statistics, Analog HUM, Depth of Modulation, CSO/CTB, FM Deviation, Sweepless Sweep, Line Viewer and QAM Source. Standard Communication Features: RF Test Port (F-Type, Replaceable), US DOCSIS 3.0 Modem 8x4 (100/304 MBPS), RJ45 Electrical Ethernet Port (10/100MBPS), CM to RJ-45 Mode. The complete kit includes: 860 DSPi Meter, Protective Carrying Case, Shoulder Strap, US AC Power Cable and AC to DC Power Adapter & Battery Charger. Configured with: Power Pack (PP-1), Spectrum Analyzer (SA-1), QAM (QA-2), Vestigial Side Band Modulation (VSB), Forward Sweep (FS-1), TraffiControl (TC-1), Frequency Domain Reflectometer (FDR-1) and Return Transmitter Board (RTB) Options
860 DSPi Field Analyzer

860 DSPi - US (PP-1, SR-1, SA-1, QA-2, VSB, FS-1, TC-1, FDR-1 & RTB)

Configured with options

The 860 DSPi is a handheld spectrum analyzer with US DOCSIS 3.0 (8x4) modem that provides all of the testing power needed to ensure HFC networks operate to high standards. This includes balancing of the distribution system, maintaining analog and digital signal quality and controlling return path ingress. Standard Testing Features: 6 MHz Channel Spacing, Return Spectrum Analysis (4 to 65 MHz), Forward Spectrum Analysis (4 to 1000 MHz), Level Measurement, C/N Measurement, QAM Measurement (Level/MER/BER), Channel Plan Scan with Tilt Measurement, Ping, Trace Route, VoIP, Throughput, Cable Modem Statistics, Analog HUM, Depth of Modulation, CSO/CTB, FM Deviation, Sweepless Sweep, Line Viewer and QAM Source. Standard Communication Features: RF Test Port (F-Type, Replaceable), US DOCSIS 3.0 Modem 8x4 (100/304 MBPS), RJ45 Electrical Ethernet Port (10/100MBPS), CM to RJ-45 Mode. The complete kit includes: 860 DSPi Meter, Protective Carrying Case, Shoulder Strap, US AC Power Cable and AC to DC Power Adapter & Battery Charger. Configured with: Power Pack (PP-1), Return Sweep Receiver (SR-1), Spectrum Analyzer (SA-1), QAM (QA-2), Vestigial Side Band Modulation (VSB), Forward Sweep (FS-1), TraffiControl (TC-1), Frequency Domain Reflectometer (FDR-1) and Return Transmitter Board (RTB) Options
860 DSPi Field Analyzer

860 DSPi - US (PP-1, VP-1, SA-1, QA-2, VSB, FS-1, TC-1, FDR-1 & RTB)

Configured with options

The 860 DSPi is a handheld spectrum analyzer with US DOCSIS 3.0 (8x4) modem that provides all of the testing power needed to ensure HFC networks operate to high standards. This includes balancing of the distribution system, maintaining analog and digital signal quality and controlling return path ingress. Standard Testing Features: 6 MHz Channel Spacing, Return Spectrum Analysis (4 to 65 MHz), Forward Spectrum Analysis (4 to 1000 MHz), Level Measurement, C/N Measurement, QAM Measurement (Level/MER/BER), Channel Plan Scan with Tilt Measurement, Ping, Trace Route, VoIP, Throughput, Cable Modem Statistics, Analog HUM, Depth of Modulation, CSO/CTB, FM Deviation, Sweepless Sweep, Line Viewer and QAM Source. Standard Communication Features: RF Test Port (F-Type, Replaceable), US DOCSIS 3.0 Modem 8x4 (100/304 MBPS), RJ45 Electrical Ethernet Port (10/100MBPS), CM to RJ-45 Mode. The complete kit includes: 860 DSPi Meter, Protective Carrying Case, Shoulder Strap, US AC Power Cable and AC to DC Power Adapter & Battery Charger. Configured with: Power Pack (PP-1), Return Tester RSVP (VP-1), Spectrum Analyzer (SA-1), QAM (QA-2), Vestigial Side Band Modulation (VSB), Forward Sweep (FS-1), TraffiControl (TC-1), Frequency Domain Reflectometer (FDR-1) and Return Transmitter Board (RTB) Options
860 DSPi Field Analyzer

860 DSPi - US (PP-1, SR-1, VP-1, SA-1, QA-2, VSB, FS-1, TC-1, FDR-1 & RTB)

Configured with options

The 860 DSPi is a handheld spectrum analyzer with US DOCSIS 3.0 (8x4) modem that provides all of the testing power needed to ensure HFC networks operate to high standards. This includes balancing of the distribution system, maintaining analog and digital signal quality and controlling return path ingress. Standard Testing Features: 6 MHz Channel Spacing, Return Spectrum Analysis (4 to 65 MHz), Forward Spectrum Analysis (4 to 1000 MHz), Level Measurement, C/N Measurement, QAM Measurement (Level/MER/BER), Channel Plan Scan with Tilt Measurement, Ping, Trace Route, VoIP, Throughput, Cable Modem Statistics, Analog HUM, Depth of Modulation, CSO/CTB, FM Deviation, Sweepless Sweep, Line Viewer and QAM Source. Standard Communication Features: RF Test Port (F-Type, Replaceable), US DOCSIS 3.0 Modem 8x4 (100/304 MBPS), RJ45 Electrical Ethernet Port (10/100MBPS), CM to RJ-45 Mode. The complete kit includes: 860 DSPi Meter, Protective Carrying Case, Shoulder Strap, US AC Power Cable and AC to DC Power Adapter & Battery Charger. Configured with: Power Pack (PP-1), Return Sweep Receiver (SR-1), Return Tester RSVP (VP-1), Spectrum Analyzer (SA-1), QAM (QA-2), Vestigial Side Band Modulation (VSB), Forward Sweep (FS-1), TraffiControl (TC-1), Frequency Domain Reflectometer (FDR-1) and Return Transmitter Board (RTB) Options
860 DSPi Field Analyzer

860 DSPi - US (PP-1, VITS, TC-1, FDR-1 & RTB)

Configured with options

The 860 DSPi is a handheld spectrum analyzer with US DOCSIS 3.0 (8x4) modem that provides all of the testing power needed to ensure HFC networks operate to high standards. This includes balancing of the distribution system, maintaining analog and digital signal quality and controlling return path ingress. Standard Testing Features: 6 MHz Channel Spacing, Return Spectrum Analysis (4 to 65 MHz), Forward Spectrum Analysis (4 to 1000 MHz), Level Measurement, C/N Measurement, QAM Measurement (Level/MER/BER), Channel Plan Scan with Tilt Measurement, Ping, Trace Route, VoIP, Throughput, Cable Modem Statistics, Analog HUM, Depth of Modulation, CSO/CTB, FM Deviation, Sweepless Sweep, Line Viewer and QAM Source. Standard Communication Features: RF Test Port (F-Type, Replaceable), US DOCSIS 3.0 Modem 8x4 (100/304 MBPS), RJ45 Electrical Ethernet Port (10/100MBPS), CM to RJ-45 Mode. The complete kit includes: 860 DSPi Meter, Protective Carrying Case, Shoulder Strap, US AC Power Cable and AC to DC Power Adapter & Battery Charger. Configured with: Power Pack (PP-1), Vertical Interval Test Signals (VITS), TraffiControl (TC-1), Frequency Domain Reflectometer (FDR-1) and Return Transmitter Board (RTB) Options
860 DSPi Field Analyzer

860 DSPi - US (PP-1, SR-1, VITS, TC-1, FDR-1 & RTB)

Configured with options

The 860 DSPi is a handheld spectrum analyzer with US DOCSIS 3.0 (8x4) modem that provides all of the testing power needed to ensure HFC networks operate to high standards. This includes balancing of the distribution system, maintaining analog and digital signal quality and controlling return path ingress. Standard Testing Features: 6 MHz Channel Spacing, Return Spectrum Analysis (4 to 65 MHz), Forward Spectrum Analysis (4 to 1000 MHz), Level Measurement, C/N Measurement, QAM Measurement (Level/MER/BER), Channel Plan Scan with Tilt Measurement, Ping, Trace Route, VoIP, Throughput, Cable Modem Statistics, Analog HUM, Depth of Modulation, CSO/CTB, FM Deviation, Sweepless Sweep, Line Viewer and QAM Source. Standard Communication Features: RF Test Port (F-Type, Replaceable), US DOCSIS 3.0 Modem 8x4 (100/304 MBPS), RJ45 Electrical Ethernet Port (10/100MBPS), CM to RJ-45 Mode. The complete kit includes: 860 DSPi Meter, Protective Carrying Case, Shoulder Strap, US AC Power Cable and AC to DC Power Adapter & Battery Charger. Configured with: Power Pack (PP-1), Return Sweep Receiver (SR-1), Vertical Interval Test Signals (VITS), TraffiControl (TC-1), Frequency Domain Reflectometer (FDR-1) and Return Transmitter Board (RTB) Options
860 DSPi Field Analyzer

860 DSPi - US (PP-1, VP-1, VITS, TC-1, FDR-1 & RTB)

Configured with options

The 860 DSPi is a handheld spectrum analyzer with US DOCSIS 3.0 (8x4) modem that provides all of the testing power needed to ensure HFC networks operate to high standards. This includes balancing of the distribution system, maintaining analog and digital signal quality and controlling return path ingress. Standard Testing Features: 6 MHz Channel Spacing, Return Spectrum Analysis (4 to 65 MHz), Forward Spectrum Analysis (4 to 1000 MHz), Level Measurement, C/N Measurement, QAM Measurement (Level/MER/BER), Channel Plan Scan with Tilt Measurement, Ping, Trace Route, VoIP, Throughput, Cable Modem Statistics, Analog HUM, Depth of Modulation, CSO/CTB, FM Deviation, Sweepless Sweep, Line Viewer and QAM Source. Standard Communication Features: RF Test Port (F-Type, Replaceable), US DOCSIS 3.0 Modem 8x4 (100/304 MBPS), RJ45 Electrical Ethernet Port (10/100MBPS), CM to RJ-45 Mode. The complete kit includes: 860 DSPi Meter, Protective Carrying Case, Shoulder Strap, US AC Power Cable and AC to DC Power Adapter & Battery Charger. Configured with: Power Pack (PP-1), Return Tester RSVP (VP-1), Vertical Interval Test Signals (VITS), TraffiControl (TC-1), Frequency Domain Reflectometer (FDR-1) and Return Transmitter Board (RTB) Options
860 DSPi Field Analyzer

860 DSPi - US (PP-1, SR-1, VP-1, VITS, TC-1, FDR-1 & RTB)

Configured with options

The 860 DSPi is a handheld spectrum analyzer with US DOCSIS 3.0 (8x4) modem that provides all of the testing power needed to ensure HFC networks operate to high standards. This includes balancing of the distribution system, maintaining analog and digital signal quality and controlling return path ingress. Standard Testing Features: 6 MHz Channel Spacing, Return Spectrum Analysis (4 to 65 MHz), Forward Spectrum Analysis (4 to 1000 MHz), Level Measurement, C/N Measurement, QAM Measurement (Level/MER/BER), Channel Plan Scan with Tilt Measurement, Ping, Trace Route, VoIP, Throughput, Cable Modem Statistics, Analog HUM, Depth of Modulation, CSO/CTB, FM Deviation, Sweepless Sweep, Line Viewer and QAM Source. Standard Communication Features: RF Test Port (F-Type, Replaceable), US DOCSIS 3.0 Modem 8x4 (100/304 MBPS), RJ45 Electrical Ethernet Port (10/100MBPS), CM to RJ-45 Mode. The complete kit includes: 860 DSPi Meter, Protective Carrying Case, Shoulder Strap, US AC Power Cable and AC to DC Power Adapter & Battery Charger. Configured with: Power Pack (PP-1), Return Sweep Receiver (SR-1), Return Tester RSVP (VP-1), Vertical Interval Test Signals (VITS), TraffiControl (TC-1), Frequency Domain Reflectometer (FDR-1) and Return Transmitter Board (RTB) Options
860 DSPi Field Analyzer

860 DSPi - US (PP-1, SA-1, VITS, TC-1, FDR-1 & RTB)

Configured with options

The 860 DSPi is a handheld spectrum analyzer with US DOCSIS 3.0 (8x4) modem that provides all of the testing power needed to ensure HFC networks operate to high standards. This includes balancing of the distribution system, maintaining analog and digital signal quality and controlling return path ingress. Standard Testing Features: 6 MHz Channel Spacing, Return Spectrum Analysis (4 to 65 MHz), Forward Spectrum Analysis (4 to 1000 MHz), Level Measurement, C/N Measurement, QAM Measurement (Level/MER/BER), Channel Plan Scan with Tilt Measurement, Ping, Trace Route, VoIP, Throughput, Cable Modem Statistics, Analog HUM, Depth of Modulation, CSO/CTB, FM Deviation, Sweepless Sweep, Line Viewer and QAM Source. Standard Communication Features: RF Test Port (F-Type, Replaceable), US DOCSIS 3.0 Modem 8x4 (100/304 MBPS), RJ45 Electrical Ethernet Port (10/100MBPS), CM to RJ-45 Mode. The complete kit includes: 860 DSPi Meter, Protective Carrying Case, Shoulder Strap, US AC Power Cable and AC to DC Power Adapter & Battery Charger. Configured with: Power Pack (PP-1), Spectrum Analyzer (SA-1), Vertical Interval Test Signals (VITS), TraffiControl (TC-1), Frequency Domain Reflectometer (FDR-1) and Return Transmitter Board (RTB) Options
860 DSPi Field Analyzer

860 DSPi - US (PP-1, SR-1, SA-1, VITS, TC-1, FDR-1 & RTB)

Configured with options

The 860 DSPi is a handheld spectrum analyzer with US DOCSIS 3.0 (8x4) modem that provides all of the testing power needed to ensure HFC networks operate to high standards. This includes balancing of the distribution system, maintaining analog and digital signal quality and controlling return path ingress. Standard Testing Features: 6 MHz Channel Spacing, Return Spectrum Analysis (4 to 65 MHz), Forward Spectrum Analysis (4 to 1000 MHz), Level Measurement, C/N Measurement, QAM Measurement (Level/MER/BER), Channel Plan Scan with Tilt Measurement, Ping, Trace Route, VoIP, Throughput, Cable Modem Statistics, Analog HUM, Depth of Modulation, CSO/CTB, FM Deviation, Sweepless Sweep, Line Viewer and QAM Source. Standard Communication Features: RF Test Port (F-Type, Replaceable), US DOCSIS 3.0 Modem 8x4 (100/304 MBPS), RJ45 Electrical Ethernet Port (10/100MBPS), CM to RJ-45 Mode. The complete kit includes: 860 DSPi Meter, Protective Carrying Case, Shoulder Strap, US AC Power Cable and AC to DC Power Adapter & Battery Charger. Configured with: Power Pack (PP-1), Return Sweep Receiver (SR-1), Spectrum Analyzer (SA-1), Vertical Interval Test Signals (VITS), TraffiControl (TC-1), Frequency Domain Reflectometer (FDR-1) and Return Transmitter Board (RTB) Options
860 DSPi Field Analyzer

860 DSPi - US (PP-1, VP-1, SA-1, VITS, TC-1, FDR-1 & RTB)

Configured with options

The 860 DSPi is a handheld spectrum analyzer with US DOCSIS 3.0 (8x4) modem that provides all of the testing power needed to ensure HFC networks operate to high standards. This includes balancing of the distribution system, maintaining analog and digital signal quality and controlling return path ingress. Standard Testing Features: 6 MHz Channel Spacing, Return Spectrum Analysis (4 to 65 MHz), Forward Spectrum Analysis (4 to 1000 MHz), Level Measurement, C/N Measurement, QAM Measurement (Level/MER/BER), Channel Plan Scan with Tilt Measurement, Ping, Trace Route, VoIP, Throughput, Cable Modem Statistics, Analog HUM, Depth of Modulation, CSO/CTB, FM Deviation, Sweepless Sweep, Line Viewer and QAM Source. Standard Communication Features: RF Test Port (F-Type, Replaceable), US DOCSIS 3.0 Modem 8x4 (100/304 MBPS), RJ45 Electrical Ethernet Port (10/100MBPS), CM to RJ-45 Mode. The complete kit includes: 860 DSPi Meter, Protective Carrying Case, Shoulder Strap, US AC Power Cable and AC to DC Power Adapter & Battery Charger. Configured with: Power Pack (PP-1), Return Tester RSVP (VP-1), Spectrum Analyzer (SA-1), Vertical Interval Test Signals (VITS), TraffiControl (TC-1), Frequency Domain Reflectometer (FDR-1) and Return Transmitter Board (RTB) Options
860 DSPi Field Analyzer

860 DSPi - US (PP-1, SR-1, VP-1, SA-1, VITS, TC-1, FDR-1 & RTB)

Configured with options

The 860 DSPi is a handheld spectrum analyzer with US DOCSIS 3.0 (8x4) modem that provides all of the testing power needed to ensure HFC networks operate to high standards. This includes balancing of the distribution system, maintaining analog and digital signal quality and controlling return path ingress. Standard Testing Features: 6 MHz Channel Spacing, Return Spectrum Analysis (4 to 65 MHz), Forward Spectrum Analysis (4 to 1000 MHz), Level Measurement, C/N Measurement, QAM Measurement (Level/MER/BER), Channel Plan Scan with Tilt Measurement, Ping, Trace Route, VoIP, Throughput, Cable Modem Statistics, Analog HUM, Depth of Modulation, CSO/CTB, FM Deviation, Sweepless Sweep, Line Viewer and QAM Source. Standard Communication Features: RF Test Port (F-Type, Replaceable), US DOCSIS 3.0 Modem 8x4 (100/304 MBPS), RJ45 Electrical Ethernet Port (10/100MBPS), CM to RJ-45 Mode. The complete kit includes: 860 DSPi Meter, Protective Carrying Case, Shoulder Strap, US AC Power Cable and AC to DC Power Adapter & Battery Charger. Configured with: Power Pack (PP-1), Return Sweep Receiver (SR-1), Return Tester RSVP (VP-1), Spectrum Analyzer (SA-1), Vertical Interval Test Signals (VITS), TraffiControl (TC-1), Frequency Domain Reflectometer (FDR-1) and Return Transmitter Board (RTB) Options
860 DSPi Field Analyzer

860 DSPi - US (PP-1, QA-2, VITS, TC-1, FDR-1 & RTB)

Configured with options

The 860 DSPi is a handheld spectrum analyzer with US DOCSIS 3.0 (8x4) modem that provides all of the testing power needed to ensure HFC networks operate to high standards. This includes balancing of the distribution system, maintaining analog and digital signal quality and controlling return path ingress. Standard Testing Features: 6 MHz Channel Spacing, Return Spectrum Analysis (4 to 65 MHz), Forward Spectrum Analysis (4 to 1000 MHz), Level Measurement, C/N Measurement, QAM Measurement (Level/MER/BER), Channel Plan Scan with Tilt Measurement, Ping, Trace Route, VoIP, Throughput, Cable Modem Statistics, Analog HUM, Depth of Modulation, CSO/CTB, FM Deviation, Sweepless Sweep, Line Viewer and QAM Source. Standard Communication Features: RF Test Port (F-Type, Replaceable), US DOCSIS 3.0 Modem 8x4 (100/304 MBPS), RJ45 Electrical Ethernet Port (10/100MBPS), CM to RJ-45 Mode. The complete kit includes: 860 DSPi Meter, Protective Carrying Case, Shoulder Strap, US AC Power Cable and AC to DC Power Adapter & Battery Charger. Configured with: Power Pack (PP-1), QAM (QA-2), Vertical Interval Test Signals (VITS), TraffiControl (TC-1), Frequency Domain Reflectometer (FDR-1) and Return Transmitter Board (RTB) Options
860 DSPi Field Analyzer

860 DSPi - US (PP-1, SR-1, QA-2, VITS, TC-1, FDR-1 & RTB)

Configured with options

The 860 DSPi is a handheld spectrum analyzer with US DOCSIS 3.0 (8x4) modem that provides all of the testing power needed to ensure HFC networks operate to high standards. This includes balancing of the distribution system, maintaining analog and digital signal quality and controlling return path ingress. Standard Testing Features: 6 MHz Channel Spacing, Return Spectrum Analysis (4 to 65 MHz), Forward Spectrum Analysis (4 to 1000 MHz), Level Measurement, C/N Measurement, QAM Measurement (Level/MER/BER), Channel Plan Scan with Tilt Measurement, Ping, Trace Route, VoIP, Throughput, Cable Modem Statistics, Analog HUM, Depth of Modulation, CSO/CTB, FM Deviation, Sweepless Sweep, Line Viewer and QAM Source. Standard Communication Features: RF Test Port (F-Type, Replaceable), US DOCSIS 3.0 Modem 8x4 (100/304 MBPS), RJ45 Electrical Ethernet Port (10/100MBPS), CM to RJ-45 Mode. The complete kit includes: 860 DSPi Meter, Protective Carrying Case, Shoulder Strap, US AC Power Cable and AC to DC Power Adapter & Battery Charger. Configured with: Power Pack (PP-1), Return Sweep Receiver (SR-1), QAM (QA-2), Vertical Interval Test Signals (VITS), TraffiControl (TC-1), Frequency Domain Reflectometer (FDR-1) and Return Transmitter Board (RTB) Options
860 DSPi Field Analyzer

860 DSPi - US (PP-1, VP-1, QA-2, VITS, TC-1, FDR-1 & RTB)

Configured with options

The 860 DSPi is a handheld spectrum analyzer with US DOCSIS 3.0 (8x4) modem that provides all of the testing power needed to ensure HFC networks operate to high standards. This includes balancing of the distribution system, maintaining analog and digital signal quality and controlling return path ingress. Standard Testing Features: 6 MHz Channel Spacing, Return Spectrum Analysis (4 to 65 MHz), Forward Spectrum Analysis (4 to 1000 MHz), Level Measurement, C/N Measurement, QAM Measurement (Level/MER/BER), Channel Plan Scan with Tilt Measurement, Ping, Trace Route, VoIP, Throughput, Cable Modem Statistics, Analog HUM, Depth of Modulation, CSO/CTB, FM Deviation, Sweepless Sweep, Line Viewer and QAM Source. Standard Communication Features: RF Test Port (F-Type, Replaceable), US DOCSIS 3.0 Modem 8x4 (100/304 MBPS), RJ45 Electrical Ethernet Port (10/100MBPS), CM to RJ-45 Mode. The complete kit includes: 860 DSPi Meter, Protective Carrying Case, Shoulder Strap, US AC Power Cable and AC to DC Power Adapter & Battery Charger. Configured with: Power Pack (PP-1), Return Tester RSVP (VP-1), QAM (QA-2), Vertical Interval Test Signals (VITS), TraffiControl (TC-1), Frequency Domain Reflectometer (FDR-1) and Return Transmitter Board (RTB) Options
860 DSPi Field Analyzer

860 DSPi - US (PP-1, SR-1, VP-1, QA-2, VITS, TC-1, FDR-1 & RTB)

Configured with options

The 860 DSPi is a handheld spectrum analyzer with US DOCSIS 3.0 (8x4) modem that provides all of the testing power needed to ensure HFC networks operate to high standards. This includes balancing of the distribution system, maintaining analog and digital signal quality and controlling return path ingress. Standard Testing Features: 6 MHz Channel Spacing, Return Spectrum Analysis (4 to 65 MHz), Forward Spectrum Analysis (4 to 1000 MHz), Level Measurement, C/N Measurement, QAM Measurement (Level/MER/BER), Channel Plan Scan with Tilt Measurement, Ping, Trace Route, VoIP, Throughput, Cable Modem Statistics, Analog HUM, Depth of Modulation, CSO/CTB, FM Deviation, Sweepless Sweep, Line Viewer and QAM Source. Standard Communication Features: RF Test Port (F-Type, Replaceable), US DOCSIS 3.0 Modem 8x4 (100/304 MBPS), RJ45 Electrical Ethernet Port (10/100MBPS), CM to RJ-45 Mode. The complete kit includes: 860 DSPi Meter, Protective Carrying Case, Shoulder Strap, US AC Power Cable and AC to DC Power Adapter & Battery Charger. Configured with: Power Pack (PP-1), Return Sweep Receiver (SR-1), Return Tester RSVP (VP-1), QAM (QA-2), Vertical Interval Test Signals (VITS), TraffiControl (TC-1), Frequency Domain Reflectometer (FDR-1) and Return Transmitter Board (RTB) Options
860 DSPi Field Analyzer

860 DSPi - US (PP-1, SA-1, QA-2, VITS, TC-1, FDR-1 & RTB)

Configured with options

The 860 DSPi is a handheld spectrum analyzer with US DOCSIS 3.0 (8x4) modem that provides all of the testing power needed to ensure HFC networks operate to high standards. This includes balancing of the distribution system, maintaining analog and digital signal quality and controlling return path ingress. Standard Testing Features: 6 MHz Channel Spacing, Return Spectrum Analysis (4 to 65 MHz), Forward Spectrum Analysis (4 to 1000 MHz), Level Measurement, C/N Measurement, QAM Measurement (Level/MER/BER), Channel Plan Scan with Tilt Measurement, Ping, Trace Route, VoIP, Throughput, Cable Modem Statistics, Analog HUM, Depth of Modulation, CSO/CTB, FM Deviation, Sweepless Sweep, Line Viewer and QAM Source. Standard Communication Features: RF Test Port (F-Type, Replaceable), US DOCSIS 3.0 Modem 8x4 (100/304 MBPS), RJ45 Electrical Ethernet Port (10/100MBPS), CM to RJ-45 Mode. The complete kit includes: 860 DSPi Meter, Protective Carrying Case, Shoulder Strap, US AC Power Cable and AC to DC Power Adapter & Battery Charger. Configured with: Power Pack (PP-1), Spectrum Analyzer (SA-1), QAM (QA-2), Vertical Interval Test Signals (VITS), TraffiControl (TC-1), Frequency Domain Reflectometer (FDR-1) and Return Transmitter Board (RTB) Options
860 DSPi Field Analyzer

860 DSPi - US (PP-1, SR-1, SA-1, QA-2, VITS, TC-1, FDR-1 & RTB)

Configured with options

The 860 DSPi is a handheld spectrum analyzer with US DOCSIS 3.0 (8x4) modem that provides all of the testing power needed to ensure HFC networks operate to high standards. This includes balancing of the distribution system, maintaining analog and digital signal quality and controlling return path ingress. Standard Testing Features: 6 MHz Channel Spacing, Return Spectrum Analysis (4 to 65 MHz), Forward Spectrum Analysis (4 to 1000 MHz), Level Measurement, C/N Measurement, QAM Measurement (Level/MER/BER), Channel Plan Scan with Tilt Measurement, Ping, Trace Route, VoIP, Throughput, Cable Modem Statistics, Analog HUM, Depth of Modulation, CSO/CTB, FM Deviation, Sweepless Sweep, Line Viewer and QAM Source. Standard Communication Features: RF Test Port (F-Type, Replaceable), US DOCSIS 3.0 Modem 8x4 (100/304 MBPS), RJ45 Electrical Ethernet Port (10/100MBPS), CM to RJ-45 Mode. The complete kit includes: 860 DSPi Meter, Protective Carrying Case, Shoulder Strap, US AC Power Cable and AC to DC Power Adapter & Battery Charger. Configured with: Power Pack (PP-1), Return Sweep Receiver (SR-1), Spectrum Analyzer (SA-1), QAM (QA-2), Vertical Interval Test Signals (VITS), TraffiControl (TC-1), Frequency Domain Reflectometer (FDR-1) and Return Transmitter Board (RTB) Options
860 DSPi Field Analyzer

860 DSPi - US (PP-1, VP-1, SA-1, QA-2, VITS, TC-1, FDR-1 & RTB)

Configured with options

The 860 DSPi is a handheld spectrum analyzer with US DOCSIS 3.0 (8x4) modem that provides all of the testing power needed to ensure HFC networks operate to high standards. This includes balancing of the distribution system, maintaining analog and digital signal quality and controlling return path ingress. Standard Testing Features: 6 MHz Channel Spacing, Return Spectrum Analysis (4 to 65 MHz), Forward Spectrum Analysis (4 to 1000 MHz), Level Measurement, C/N Measurement, QAM Measurement (Level/MER/BER), Channel Plan Scan with Tilt Measurement, Ping, Trace Route, VoIP, Throughput, Cable Modem Statistics, Analog HUM, Depth of Modulation, CSO/CTB, FM Deviation, Sweepless Sweep, Line Viewer and QAM Source. Standard Communication Features: RF Test Port (F-Type, Replaceable), US DOCSIS 3.0 Modem 8x4 (100/304 MBPS), RJ45 Electrical Ethernet Port (10/100MBPS), CM to RJ-45 Mode. The complete kit includes: 860 DSPi Meter, Protective Carrying Case, Shoulder Strap, US AC Power Cable and AC to DC Power Adapter & Battery Charger. Configured with: Power Pack (PP-1), Return Tester RSVP (VP-1), Spectrum Analyzer (SA-1), QAM (QA-2), Vertical Interval Test Signals (VITS), TraffiControl (TC-1), Frequency Domain Reflectometer (FDR-1) and Return Transmitter Board (RTB) Options
860 DSPi Field Analyzer

860 DSPi - US (PP-1, SR-1, VP-1, SA-1, QA-2, VITS, TC-1, FDR-1 & RTB)

Configured with options

The 860 DSPi is a handheld spectrum analyzer with US DOCSIS 3.0 (8x4) modem that provides all of the testing power needed to ensure HFC networks operate to high standards. This includes balancing of the distribution system, maintaining analog and digital signal quality and controlling return path ingress. Standard Testing Features: 6 MHz Channel Spacing, Return Spectrum Analysis (4 to 65 MHz), Forward Spectrum Analysis (4 to 1000 MHz), Level Measurement, C/N Measurement, QAM Measurement (Level/MER/BER), Channel Plan Scan with Tilt Measurement, Ping, Trace Route, VoIP, Throughput, Cable Modem Statistics, Analog HUM, Depth of Modulation, CSO/CTB, FM Deviation, Sweepless Sweep, Line Viewer and QAM Source. Standard Communication Features: RF Test Port (F-Type, Replaceable), US DOCSIS 3.0 Modem 8x4 (100/304 MBPS), RJ45 Electrical Ethernet Port (10/100MBPS), CM to RJ-45 Mode. The complete kit includes: 860 DSPi Meter, Protective Carrying Case, Shoulder Strap, US AC Power Cable and AC to DC Power Adapter & Battery Charger. Configured with: Power Pack (PP-1), Return Sweep Receiver (SR-1), Return Tester RSVP (VP-1), Spectrum Analyzer (SA-1), QAM (QA-2), Vertical Interval Test Signals (VITS), TraffiControl (TC-1), Frequency Domain Reflectometer (FDR-1) and Return Transmitter Board (RTB) Options
860 DSPi Field Analyzer

860 DSPi - US (PP-1, VSB, VITS, TC-1, FDR-1 & RTB)

Configured with options

The 860 DSPi is a handheld spectrum analyzer with US DOCSIS 3.0 (8x4) modem that provides all of the testing power needed to ensure HFC networks operate to high standards. This includes balancing of the distribution system, maintaining analog and digital signal quality and controlling return path ingress. Standard Testing Features: 6 MHz Channel Spacing, Return Spectrum Analysis (4 to 65 MHz), Forward Spectrum Analysis (4 to 1000 MHz), Level Measurement, C/N Measurement, QAM Measurement (Level/MER/BER), Channel Plan Scan with Tilt Measurement, Ping, Trace Route, VoIP, Throughput, Cable Modem Statistics, Analog HUM, Depth of Modulation, CSO/CTB, FM Deviation, Sweepless Sweep, Line Viewer and QAM Source. Standard Communication Features: RF Test Port (F-Type, Replaceable), US DOCSIS 3.0 Modem 8x4 (100/304 MBPS), RJ45 Electrical Ethernet Port (10/100MBPS), CM to RJ-45 Mode. The complete kit includes: 860 DSPi Meter, Protective Carrying Case, Shoulder Strap, US AC Power Cable and AC to DC Power Adapter & Battery Charger. Configured with: Power Pack (PP-1), Vestigial Side Band Modulation (VSB), Vertical Interval Test Signals (VITS), TraffiControl (TC-1), Frequency Domain Reflectometer (FDR-1) and Return Transmitter Board (RTB) Options
860 DSPi Field Analyzer

860 DSPi - US (PP-1, SR-1, VSB, VITS, TC-1, FDR-1 & RTB)

Configured with options

The 860 DSPi is a handheld spectrum analyzer with US DOCSIS 3.0 (8x4) modem that provides all of the testing power needed to ensure HFC networks operate to high standards. This includes balancing of the distribution system, maintaining analog and digital signal quality and controlling return path ingress. Standard Testing Features: 6 MHz Channel Spacing, Return Spectrum Analysis (4 to 65 MHz), Forward Spectrum Analysis (4 to 1000 MHz), Level Measurement, C/N Measurement, QAM Measurement (Level/MER/BER), Channel Plan Scan with Tilt Measurement, Ping, Trace Route, VoIP, Throughput, Cable Modem Statistics, Analog HUM, Depth of Modulation, CSO/CTB, FM Deviation, Sweepless Sweep, Line Viewer and QAM Source. Standard Communication Features: RF Test Port (F-Type, Replaceable), US DOCSIS 3.0 Modem 8x4 (100/304 MBPS), RJ45 Electrical Ethernet Port (10/100MBPS), CM to RJ-45 Mode. The complete kit includes: 860 DSPi Meter, Protective Carrying Case, Shoulder Strap, US AC Power Cable and AC to DC Power Adapter & Battery Charger. Configured with: Power Pack (PP-1), Return Sweep Receiver (SR-1), Vestigial Side Band Modulation (VSB), Vertical Interval Test Signals (VITS), TraffiControl (TC-1), Frequency Domain Reflectometer (FDR-1) and Return Transmitter Board (RTB) Options
860 DSPi Field Analyzer

860 DSPi - US (PP-1, VP-1, VSB, VITS, TC-1, FDR-1 & RTB)

Configured with options

The 860 DSPi is a handheld spectrum analyzer with US DOCSIS 3.0 (8x4) modem that provides all of the testing power needed to ensure HFC networks operate to high standards. This includes balancing of the distribution system, maintaining analog and digital signal quality and controlling return path ingress. Standard Testing Features: 6 MHz Channel Spacing, Return Spectrum Analysis (4 to 65 MHz), Forward Spectrum Analysis (4 to 1000 MHz), Level Measurement, C/N Measurement, QAM Measurement (Level/MER/BER), Channel Plan Scan with Tilt Measurement, Ping, Trace Route, VoIP, Throughput, Cable Modem Statistics, Analog HUM, Depth of Modulation, CSO/CTB, FM Deviation, Sweepless Sweep, Line Viewer and QAM Source. Standard Communication Features: RF Test Port (F-Type, Replaceable), US DOCSIS 3.0 Modem 8x4 (100/304 MBPS), RJ45 Electrical Ethernet Port (10/100MBPS), CM to RJ-45 Mode. The complete kit includes: 860 DSPi Meter, Protective Carrying Case, Shoulder Strap, US AC Power Cable and AC to DC Power Adapter & Battery Charger. Configured with: Power Pack (PP-1), Return Tester RSVP (VP-1), Vestigial Side Band Modulation (VSB), Vertical Interval Test Signals (VITS), TraffiControl (TC-1), Frequency Domain Reflectometer (FDR-1) and Return Transmitter Board (RTB) Options
860 DSPi Field Analyzer

860 DSPi - US (PP-1, SR-1, VP-1, VSB, VITS, TC-1, FDR-1 & RTB)

Configured with options

The 860 DSPi is a handheld spectrum analyzer with US DOCSIS 3.0 (8x4) modem that provides all of the testing power needed to ensure HFC networks operate to high standards. This includes balancing of the distribution system, maintaining analog and digital signal quality and controlling return path ingress. Standard Testing Features: 6 MHz Channel Spacing, Return Spectrum Analysis (4 to 65 MHz), Forward Spectrum Analysis (4 to 1000 MHz), Level Measurement, C/N Measurement, QAM Measurement (Level/MER/BER), Channel Plan Scan with Tilt Measurement, Ping, Trace Route, VoIP, Throughput, Cable Modem Statistics, Analog HUM, Depth of Modulation, CSO/CTB, FM Deviation, Sweepless Sweep, Line Viewer and QAM Source. Standard Communication Features: RF Test Port (F-Type, Replaceable), US DOCSIS 3.0 Modem 8x4 (100/304 MBPS), RJ45 Electrical Ethernet Port (10/100MBPS), CM to RJ-45 Mode. The complete kit includes: 860 DSPi Meter, Protective Carrying Case, Shoulder Strap, US AC Power Cable and AC to DC Power Adapter & Battery Charger. Configured with: Power Pack (PP-1), Return Sweep Receiver (SR-1), Return Tester RSVP (VP-1), Vestigial Side Band Modulation (VSB), Vertical Interval Test Signals (VITS), TraffiControl (TC-1), Frequency Domain Reflectometer (FDR-1) and Return Transmitter Board (RTB) Options
860 DSPi Field Analyzer

860 DSPi - US (PP-1, SA-1, VSB, VITS, TC-1, FDR-1 & RTB)

Configured with options

The 860 DSPi is a handheld spectrum analyzer with US DOCSIS 3.0 (8x4) modem that provides all of the testing power needed to ensure HFC networks operate to high standards. This includes balancing of the distribution system, maintaining analog and digital signal quality and controlling return path ingress. Standard Testing Features: 6 MHz Channel Spacing, Return Spectrum Analysis (4 to 65 MHz), Forward Spectrum Analysis (4 to 1000 MHz), Level Measurement, C/N Measurement, QAM Measurement (Level/MER/BER), Channel Plan Scan with Tilt Measurement, Ping, Trace Route, VoIP, Throughput, Cable Modem Statistics, Analog HUM, Depth of Modulation, CSO/CTB, FM Deviation, Sweepless Sweep, Line Viewer and QAM Source. Standard Communication Features: RF Test Port (F-Type, Replaceable), US DOCSIS 3.0 Modem 8x4 (100/304 MBPS), RJ45 Electrical Ethernet Port (10/100MBPS), CM to RJ-45 Mode. The complete kit includes: 860 DSPi Meter, Protective Carrying Case, Shoulder Strap, US AC Power Cable and AC to DC Power Adapter & Battery Charger. Configured with: Power Pack (PP-1), Spectrum Analyzer (SA-1), Vestigial Side Band Modulation (VSB), Vertical Interval Test Signals (VITS), TraffiControl (TC-1), Frequency Domain Reflectometer (FDR-1) and Return Transmitter Board (RTB) Options
860 DSPi Field Analyzer

860 DSPi - US (PP-1, SR-1, SA-1, VSB, VITS, TC-1, FDR-1 & RTB)

Configured with options

The 860 DSPi is a handheld spectrum analyzer with US DOCSIS 3.0 (8x4) modem that provides all of the testing power needed to ensure HFC networks operate to high standards. This includes balancing of the distribution system, maintaining analog and digital signal quality and controlling return path ingress. Standard Testing Features: 6 MHz Channel Spacing, Return Spectrum Analysis (4 to 65 MHz), Forward Spectrum Analysis (4 to 1000 MHz), Level Measurement, C/N Measurement, QAM Measurement (Level/MER/BER), Channel Plan Scan with Tilt Measurement, Ping, Trace Route, VoIP, Throughput, Cable Modem Statistics, Analog HUM, Depth of Modulation, CSO/CTB, FM Deviation, Sweepless Sweep, Line Viewer and QAM Source. Standard Communication Features: RF Test Port (F-Type, Replaceable), US DOCSIS 3.0 Modem 8x4 (100/304 MBPS), RJ45 Electrical Ethernet Port (10/100MBPS), CM to RJ-45 Mode. The complete kit includes: 860 DSPi Meter, Protective Carrying Case, Shoulder Strap, US AC Power Cable and AC to DC Power Adapter & Battery Charger. Configured with: Power Pack (PP-1), Return Sweep Receiver (SR-1), Spectrum Analyzer (SA-1), Vestigial Side Band Modulation (VSB), Vertical Interval Test Signals (VITS), TraffiControl (TC-1), Frequency Domain Reflectometer (FDR-1) and Return Transmitter Board (RTB) Options
860 DSPi Field Analyzer

860 DSPi - US (PP-1, VP-1, SA-1, VSB, VITS, TC-1, FDR-1 & RTB)

Configured with options

The 860 DSPi is a handheld spectrum analyzer with US DOCSIS 3.0 (8x4) modem that provides all of the testing power needed to ensure HFC networks operate to high standards. This includes balancing of the distribution system, maintaining analog and digital signal quality and controlling return path ingress. Standard Testing Features: 6 MHz Channel Spacing, Return Spectrum Analysis (4 to 65 MHz), Forward Spectrum Analysis (4 to 1000 MHz), Level Measurement, C/N Measurement, QAM Measurement (Level/MER/BER), Channel Plan Scan with Tilt Measurement, Ping, Trace Route, VoIP, Throughput, Cable Modem Statistics, Analog HUM, Depth of Modulation, CSO/CTB, FM Deviation, Sweepless Sweep, Line Viewer and QAM Source. Standard Communication Features: RF Test Port (F-Type, Replaceable), US DOCSIS 3.0 Modem 8x4 (100/304 MBPS), RJ45 Electrical Ethernet Port (10/100MBPS), CM to RJ-45 Mode. The complete kit includes: 860 DSPi Meter, Protective Carrying Case, Shoulder Strap, US AC Power Cable and AC to DC Power Adapter & Battery Charger. Configured with: Power Pack (PP-1), Return Tester RSVP (VP-1), Spectrum Analyzer (SA-1), Vestigial Side Band Modulation (VSB), Vertical Interval Test Signals (VITS), TraffiControl (TC-1), Frequency Domain Reflectometer (FDR-1) and Return Transmitter Board (RTB) Options
860 DSPi Field Analyzer

860 DSPi - US (PP-1, SR-1, VP-1, SA-1, VSB, VITS, TC-1, FDR-1 & RTB)

Configured with options

The 860 DSPi is a handheld spectrum analyzer with US DOCSIS 3.0 (8x4) modem that provides all of the testing power needed to ensure HFC networks operate to high standards. This includes balancing of the distribution system, maintaining analog and digital signal quality and controlling return path ingress. Standard Testing Features: 6 MHz Channel Spacing, Return Spectrum Analysis (4 to 65 MHz), Forward Spectrum Analysis (4 to 1000 MHz), Level Measurement, C/N Measurement, QAM Measurement (Level/MER/BER), Channel Plan Scan with Tilt Measurement, Ping, Trace Route, VoIP, Throughput, Cable Modem Statistics, Analog HUM, Depth of Modulation, CSO/CTB, FM Deviation, Sweepless Sweep, Line Viewer and QAM Source. Standard Communication Features: RF Test Port (F-Type, Replaceable), US DOCSIS 3.0 Modem 8x4 (100/304 MBPS), RJ45 Electrical Ethernet Port (10/100MBPS), CM to RJ-45 Mode. The complete kit includes: 860 DSPi Meter, Protective Carrying Case, Shoulder Strap, US AC Power Cable and AC to DC Power Adapter & Battery Charger. Configured with: Power Pack (PP-1), Return Sweep Receiver (SR-1), Return Tester RSVP (VP-1), Spectrum Analyzer (SA-1), Vestigial Side Band Modulation (VSB), Vertical Interval Test Signals (VITS), TraffiControl (TC-1), Frequency Domain Reflectometer (FDR-1) and Return Transmitter Board (RTB) Options
860 DSPi Field Analyzer

860 DSPi - US (PP-1, QA-2, VSB, VITS, TC-1, FDR-1 & RTB)

Configured with options

The 860 DSPi is a handheld spectrum analyzer with US DOCSIS 3.0 (8x4) modem that provides all of the testing power needed to ensure HFC networks operate to high standards. This includes balancing of the distribution system, maintaining analog and digital signal quality and controlling return path ingress. Standard Testing Features: 6 MHz Channel Spacing, Return Spectrum Analysis (4 to 65 MHz), Forward Spectrum Analysis (4 to 1000 MHz), Level Measurement, C/N Measurement, QAM Measurement (Level/MER/BER), Channel Plan Scan with Tilt Measurement, Ping, Trace Route, VoIP, Throughput, Cable Modem Statistics, Analog HUM, Depth of Modulation, CSO/CTB, FM Deviation, Sweepless Sweep, Line Viewer and QAM Source. Standard Communication Features: RF Test Port (F-Type, Replaceable), US DOCSIS 3.0 Modem 8x4 (100/304 MBPS), RJ45 Electrical Ethernet Port (10/100MBPS), CM to RJ-45 Mode. The complete kit includes: 860 DSPi Meter, Protective Carrying Case, Shoulder Strap, US AC Power Cable and AC to DC Power Adapter & Battery Charger. Configured with: Power Pack (PP-1), QAM (QA-2), Vestigial Side Band Modulation (VSB), Vertical Interval Test Signals (VITS), TraffiControl (TC-1), Frequency Domain Reflectometer (FDR-1) and Return Transmitter Board (RTB) Options
860 DSPi Field Analyzer

860 DSPi - US (PP-1, SR-1, QA-2, VSB, VITS, TC-1, FDR-1 & RTB)

Configured with options

The 860 DSPi is a handheld spectrum analyzer with US DOCSIS 3.0 (8x4) modem that provides all of the testing power needed to ensure HFC networks operate to high standards. This includes balancing of the distribution system, maintaining analog and digital signal quality and controlling return path ingress. Standard Testing Features: 6 MHz Channel Spacing, Return Spectrum Analysis (4 to 65 MHz), Forward Spectrum Analysis (4 to 1000 MHz), Level Measurement, C/N Measurement, QAM Measurement (Level/MER/BER), Channel Plan Scan with Tilt Measurement, Ping, Trace Route, VoIP, Throughput, Cable Modem Statistics, Analog HUM, Depth of Modulation, CSO/CTB, FM Deviation, Sweepless Sweep, Line Viewer and QAM Source. Standard Communication Features: RF Test Port (F-Type, Replaceable), US DOCSIS 3.0 Modem 8x4 (100/304 MBPS), RJ45 Electrical Ethernet Port (10/100MBPS), CM to RJ-45 Mode. The complete kit includes: 860 DSPi Meter, Protective Carrying Case, Shoulder Strap, US AC Power Cable and AC to DC Power Adapter & Battery Charger. Configured with: Power Pack (PP-1), Return Sweep Receiver (SR-1), QAM (QA-2), Vestigial Side Band Modulation (VSB), Vertical Interval Test Signals (VITS), TraffiControl (TC-1), Frequency Domain Reflectometer (FDR-1) and Return Transmitter Board (RTB) Options
860 DSPi Field Analyzer

860 DSPi - US (PP-1, VP-1, QA-2, VSB, VITS, TC-1, FDR-1 & RTB)

Configured with options

The 860 DSPi is a handheld spectrum analyzer with US DOCSIS 3.0 (8x4) modem that provides all of the testing power needed to ensure HFC networks operate to high standards. This includes balancing of the distribution system, maintaining analog and digital signal quality and controlling return path ingress. Standard Testing Features: 6 MHz Channel Spacing, Return Spectrum Analysis (4 to 65 MHz), Forward Spectrum Analysis (4 to 1000 MHz), Level Measurement, C/N Measurement, QAM Measurement (Level/MER/BER), Channel Plan Scan with Tilt Measurement, Ping, Trace Route, VoIP, Throughput, Cable Modem Statistics, Analog HUM, Depth of Modulation, CSO/CTB, FM Deviation, Sweepless Sweep, Line Viewer and QAM Source. Standard Communication Features: RF Test Port (F-Type, Replaceable), US DOCSIS 3.0 Modem 8x4 (100/304 MBPS), RJ45 Electrical Ethernet Port (10/100MBPS), CM to RJ-45 Mode. The complete kit includes: 860 DSPi Meter, Protective Carrying Case, Shoulder Strap, US AC Power Cable and AC to DC Power Adapter & Battery Charger. Configured with: Power Pack (PP-1), Return Tester RSVP (VP-1), QAM (QA-2), Vestigial Side Band Modulation (VSB), Vertical Interval Test Signals (VITS), TraffiControl (TC-1), Frequency Domain Reflectometer (FDR-1) and Return Transmitter Board (RTB) Options
860 DSPi Field Analyzer

860 DSPi - US (PP-1, SR-1, VP-1, QA-2, VSB, VITS, TC-1, FDR-1 & RTB)

Configured with options

The 860 DSPi is a handheld spectrum analyzer with US DOCSIS 3.0 (8x4) modem that provides all of the testing power needed to ensure HFC networks operate to high standards. This includes balancing of the distribution system, maintaining analog and digital signal quality and controlling return path ingress. Standard Testing Features: 6 MHz Channel Spacing, Return Spectrum Analysis (4 to 65 MHz), Forward Spectrum Analysis (4 to 1000 MHz), Level Measurement, C/N Measurement, QAM Measurement (Level/MER/BER), Channel Plan Scan with Tilt Measurement, Ping, Trace Route, VoIP, Throughput, Cable Modem Statistics, Analog HUM, Depth of Modulation, CSO/CTB, FM Deviation, Sweepless Sweep, Line Viewer and QAM Source. Standard Communication Features: RF Test Port (F-Type, Replaceable), US DOCSIS 3.0 Modem 8x4 (100/304 MBPS), RJ45 Electrical Ethernet Port (10/100MBPS), CM to RJ-45 Mode. The complete kit includes: 860 DSPi Meter, Protective Carrying Case, Shoulder Strap, US AC Power Cable and AC to DC Power Adapter & Battery Charger. Configured with: Power Pack (PP-1), Return Sweep Receiver (SR-1), Return Tester RSVP (VP-1), QAM (QA-2), Vestigial Side Band Modulation (VSB), Vertical Interval Test Signals (VITS), TraffiControl (TC-1), Frequency Domain Reflectometer (FDR-1) and Return Transmitter Board (RTB) Options
860 DSPi Field Analyzer

860 DSPi - US (PP-1, SA-1, QA-2, VSB, VITS, TC-1, FDR-1 & RTB)

Configured with options

The 860 DSPi is a handheld spectrum analyzer with US DOCSIS 3.0 (8x4) modem that provides all of the testing power needed to ensure HFC networks operate to high standards. This includes balancing of the distribution system, maintaining analog and digital signal quality and controlling return path ingress. Standard Testing Features: 6 MHz Channel Spacing, Return Spectrum Analysis (4 to 65 MHz), Forward Spectrum Analysis (4 to 1000 MHz), Level Measurement, C/N Measurement, QAM Measurement (Level/MER/BER), Channel Plan Scan with Tilt Measurement, Ping, Trace Route, VoIP, Throughput, Cable Modem Statistics, Analog HUM, Depth of Modulation, CSO/CTB, FM Deviation, Sweepless Sweep, Line Viewer and QAM Source. Standard Communication Features: RF Test Port (F-Type, Replaceable), US DOCSIS 3.0 Modem 8x4 (100/304 MBPS), RJ45 Electrical Ethernet Port (10/100MBPS), CM to RJ-45 Mode. The complete kit includes: 860 DSPi Meter, Protective Carrying Case, Shoulder Strap, US AC Power Cable and AC to DC Power Adapter & Battery Charger. Configured with: Power Pack (PP-1), Spectrum Analyzer (SA-1), QAM (QA-2), Vestigial Side Band Modulation (VSB), Vertical Interval Test Signals (VITS), TraffiControl (TC-1), Frequency Domain Reflectometer (FDR-1) and Return Transmitter Board (RTB) Options
860 DSPi Field Analyzer

860 DSPi - US (PP-1, SR-1, SA-1, QA-2, VSB, VITS, TC-1, FDR-1 & RTB)

Configured with options

The 860 DSPi is a handheld spectrum analyzer with US DOCSIS 3.0 (8x4) modem that provides all of the testing power needed to ensure HFC networks operate to high standards. This includes balancing of the distribution system, maintaining analog and digital signal quality and controlling return path ingress. Standard Testing Features: 6 MHz Channel Spacing, Return Spectrum Analysis (4 to 65 MHz), Forward Spectrum Analysis (4 to 1000 MHz), Level Measurement, C/N Measurement, QAM Measurement (Level/MER/BER), Channel Plan Scan with Tilt Measurement, Ping, Trace Route, VoIP, Throughput, Cable Modem Statistics, Analog HUM, Depth of Modulation, CSO/CTB, FM Deviation, Sweepless Sweep, Line Viewer and QAM Source. Standard Communication Features: RF Test Port (F-Type, Replaceable), US DOCSIS 3.0 Modem 8x4 (100/304 MBPS), RJ45 Electrical Ethernet Port (10/100MBPS), CM to RJ-45 Mode. The complete kit includes: 860 DSPi Meter, Protective Carrying Case, Shoulder Strap, US AC Power Cable and AC to DC Power Adapter & Battery Charger. Configured with: Power Pack (PP-1), Return Sweep Receiver