860 DSPr
Remote Signal Analyzer
The 860 DSPr is a rack-mounted and browser accessible remote signal analyzer that is designed to provide continuous access to signal analysis at remote hubs or headends.
Browser accessible virtual real-time signal analysis from anywhere
- Complete range of tests - both digital and analog signals
- User schedulable automated signal analysis reports
The 860 DSPr is a rack-mounted and browser accessible remote signal analyzer that is designed to provide continuous access to signal analysis at remote hubs or headends. The analyzer is connected to up to four different test points that need to be accessed via browser for analysis or routinely tested. The complete range of tests offered by the 860 DSP can be performed remotely, including Level, QAM (constellation, EQ, BER over time), Spectrum Analysis, Tilt, Scan, Hum, C/N, Depth of Modulation, FM Deviation, and optional VITS and VSB test modes.
The impulse BER function detects and counts individual lost packets. As a troubleshooting aid, BER data is displayed with values and a convenient graph that shows how pre and post BER changes over a user-settable interval. This allows a user to see bit errors occurring at regular intervals, which may help to determine the ingress or other interference source.
Six (6) foot CAT5e ethernet patch cable, 100 Ohm impedance with RJ-45 Male to Male connectors.
The 860 DSPr™ with Euro Power Supply is a rack mounted and browser accessible remote signal analyzer that is designed to provide continuous access to signal analysis at remote hubs or headends. The analyzer is connected to up to four different test points that need to be accessed via browser for analysis or routinely tested. The complete range of tests offered by the 860 DSP™ Field Analyzer can be performed remotely. The complete kit includes: Rack-Mounted Euro Remote Signal Analyzer, 90 to 240 VAC US and Euro Power Cables, AC to DC Power Adapter, and Operation Manual on CD.
The 860 DSPr™ is a rack mounted and browser accessible remote signal analyzer that is designed to provide continuous access to signal analysis at remote hubs or headends. The analyzer is connected to up to four different test points that need to be accessed via browser for analysis or routinely tested. The complete range of tests offered by the 860 DSP™ Field Analyzer can be performed remotely. The complete kit includes: Rack-Mounted U.S. Remote Signal Analyzer, 90 to 240 VAC US Power Cable, and Operation Manual on CD.
When installed in and 860 DSP or 860 DSPi, this Option provides a way to troubleshoot upstream ingress and noise problems within active channel bands by seeing the ingress that is present "underneath" an upstream cable modem channel, or any bursty signal. REQUIRES POWER PACK OPTION FOR 860 DSPi.
Allows headend technicians to view Vertical Interval Test Signals (VITS) and specify lines for testing. The option enables the technician to measure differential phase, differential gain, and chroma delay. REQUIRES POWER PACK OPTION.
When installed in an 860 DSPi, this option allows the operator to connect an off air antenna to the 860 DSPi input port and read Level, MER, BER, and view Constellation and Equalizer Tap Information on 8 VSB and 16 VSB channels. REQUIRES FIRMWARE VERSION V7.4.1.1 or HIGHER. Aftermarket purchases require the Enhanced Digital Video Retrofit (IL-2).
This multifunction analyzer takes advantage of digital signal processing techniques to perform transmission and signal quality tests, on both analog and digital signals.
Portable cable analyzer and CATV meter with a built-in DOCSIS 3.0 modem for performing transmission and signal quality tests for analog and digital HSD and VoIP services.
Euro AC power cable for Trilithic products. This is a Euro standard 2.5 Meter power cable with a Continental Europe 2-prong plug Male (IEC 884/CEE 7/VII) to 3-pin shroud plug Female (IEC 320C13). Can be used to replace the Euro power cable that is included with the following products: 8300 FST (8 MHz Euro DOCSIS), 860 DSPh with Euro Power Supply, 860 DSPi with Euro DOCSIS 2.0 Modem, 860 DSPi with Euro DOCSIS 3.0 Modem, and 860 DSPr with Euro Power Supply. Can be used as an accessory for the following products: CT-2 (CE Approved), CT-3 (CE Approved), 8310 RSA, 860 DSP, 860 DSPh Input Expander, and 9581 SST R3 & 9581 SST R4.
AC power cable for Trilithic rack-mount units. This is a U.S. standard 6 Foot power cable with a 3-prong grounded plug Male (NEMA 5-15P) to 3-pin shroud plug Female (IEC 320C13). Can be used with the following products; CT-2 & CT-3, 8300 FST (6 MHz US DOCSIS), 8310 RSA, 860 DSP, 860 DSPh, 860 DSPh Input Expander, 860 DSPi with US DOCSIS 2.0 Modem, 860 DSPi with US DOCSIS 3.0 Modem, 860 DSPr, 9581 SST R3, and 9581 SST R4.
ACTS server software enables high speed throughput tests using the 860 DSPi with speeds up to 40 Mbps, and can also be used as a ping test reflector.
Trilithic Data Manager (TDM) combines high-performance hardware and powerful software applications to provide a comprehensive solution for managing test data and field analyzer inventory.
Software for the 860 DSP, 860 DSPi, 860 DSPh, and 860 DSPr analyzers and 8300 FST Forward SpeedSweep Transmitter.
Repairs
All repairs carry a 90-day warranty against defects in replacement parts and repair workmanship.
Products
All Trilithic products are warranted against defects in materials or workmanship for a minimum of one year after shipment.
Trilithic's obligation under this warranty is limited to the repair or replacement of the product after being returned to our factory, and Trilithic determining the product be indeed defective.
This is Trilithic's sole warranty and is given in lieu of all other warranties, expressed or implied, including warranties of merchantability or fitness for a particular purpose and sets forth the buyers sole remedy.
The following products carry a Manufacturer's One Year Warranty
| 8821Q, 8821Q-R & 8853Q | Rotary & Benchtop Attenuators | TFS-FS1 |
| APSS-1B | TFS-201 | TFS-FS1K500 Series |
| DCVF-5 | TFS-290 Series | TLB-60 |
| Impedance Matching Pads | TFS-301 | Tunable Filters |
| I-Stop | TFS-401 | VF-4 & VF-5 |
| MetroNet 5020, 5100, 5120 & 5200 | TFS-2000 Series | |
| Programmable RF Switches | TFS-3200 Series |
The following products carry a Manufacturer's Two Year Warranty
| 860 DSP & 860 DSPi | 9581 SST R3 & 9581 SST R4 | RSVP² |
| 860 DSPh & Input Expander | 9581 TPX | Seeker Lite² |
| 860 DSPr | CT-2/ CT-3 | Seeker |
| 8300 FST | Model Two | Seeker MCA |
| 8310 RSA | Model Three | Seeker BB-2 |
The following products carry a Dell Three Year Warranty
All Specially Configured Dell PowerEdge 2U Rack Mount Server products are warranted against defects in materials or workmanship for a minimum of three years after shipment. Dell provides next business day, parts and labor, on-site response for the following Trilithic products.
| ADIA Integrated Server Package | LAW Server Package |
| Guardian II Integrated Server Package | Trilithic Data Manager (TDM) Integrated Server Package |